Facial reconstruction

Search LJMU Research Online

Browse Repository | Browse E-Theses

Experimental study on the optimisation of chemical treatment to reduce waste rubber aggregates absorption properties

Ateeq, M and Al-Shamma'a, A (2016) Experimental study on the optimisation of chemical treatment to reduce waste rubber aggregates absorption properties. Construction and Building Materials, 126. ISSN 0950-0618

[img] Text
Manuscript_revised.pdf - Accepted Version
Restricted to Repository staff only until 20 September 2018.
Available under License Creative Commons Attribution Non-commercial No Derivatives.

Download (1MB)

Abstract

Utilisation of abundant waste rubber generated from scrap tyres in pavement engineering applications could be a useful route to consume large extent of the waste from the scrap tyres. It may contribute towards maintaining a greener environment by reducing the associated environmental and social impacts as well as improve the properties of bituminous mixture used for pavement engineering applications. This paper focuses on the upgrading of waste rubber aggregates surface properties by identifying and applying optimised chemical treatment (oxidation and cross-linking). The focus was to increase the life span of bituminous mixtures containing waste rubber as an aggregate by reducing a phenomenon of migration of light fractions (maltenes) from bitumen to rubber which occur at elevated temperatures ranging between 160-180ºC. The results of various tests conducted showed the potential of the treatment to reduce the absorption of maltenes into rubber. The existence of the surface treatment was verified through the Scanning Electron Microscope (SEM) analysis of the rubber aggregate. The reduction in the absorption properties of rubber due to the existence of the treatment was verified using the Microwave Spectroscopy technique. The results of both the tests were promising in terms of indicating the durability of the treatment and the reduction in the absorption properties of rubber. Mechanical tests such as Indirect Tensile Stiffness Modulus (ITSM) and Repeated Load Axial (RLA) tests were conducted on the newly devised bituminous mix design with 10% of added rubber (by mass of the sample). The results were promising in the case of the aged samples with both the stiffness and load bearing capacity being higher for the aged samples. However, the results need improvement in terms of its applications on the light traffic areas through the replacement of the ordinary filler with the mineral filler. Also, a higher percentage of waste rubber should be added to study the suitability of its use in the flexible surface applications such as children’s playgrounds, sports pitches and surfaces, etc.

Item Type: Article
Uncontrolled Keywords: 0905 Civil Engineering, 1202 Building
Subjects: T Technology > TE Highway engineering. Roads and pavements
T Technology > TP Chemical technology
Divisions: Built Environment
Publisher: Elsevier
Date Deposited: 08 Sep 2016 09:40
Last Modified: 07 Sep 2017 02:31
DOI or Identification number: 10.1016/j.conbuildmat.2016.09.021
URI: http://researchonline.ljmu.ac.uk/id/eprint/4104

Actions (login required)

View Item View Item