Items where Author is "Opoz, TT"
![]() | Up a level |
Gayretli, B, Shanthar, R, Opoz, TT and Abeykoon, C (2024) Mechanical Properties of LDPE and PS Polymer Matrix Composites Reinforced with GNP and CF — A Critical Review. International Journal of Lightweight Materials and Manufacture, 7 (4). pp. 572-596. ISSN 2588-8404
Ahuir Torres, JI, Kotadia, HR and Opoz, TT (2023) Effect of the electrical discharge machining on Ti6Al4V corrosion behaviour in simulated body fluid. Surface and Coatings Technology, 470. ISSN 0257-8972
Burgess, A, Dodd, R, Radwani, M, Opoz, TT and Tammas-Williams, S (2022) The properties of stainless steel 17-4PH produced by a low cost additive manufacturing technique, the Marforged MetalX. Journal of Physics : Conference Series, 2198 (1). 012065-012065. ISSN 1742-6588
Tokucoglu, H, Chen, X, El Rhalibi, A and Opoz, TT (2019) Sensor Based Cost Modelling for a Knowledge Support System Development. In: 2019 25th International Conference on Automation and Computing (ICAC) . (IEEE International conference on automation and computing, 5-7th September 2019, Lancaster, UK).
Chen, Y, Chen, X, AIOuarab, L, Opoz, TT, Xu, XP and Yu, G (2019) Morphology Analysis and Characteristics Evaluation of Typical Super Abrasive Grits in Micron Scale. Journal of Superhard Materials, 41 (3). pp. 189-200. ISSN 1063-4576
Opoz, TT, Yasar, H, Murphy, MF, Ekmekci, N and Ekmekci, B (2019) Ti6Al4V Surface Modification by Hydroxyapatite Powder Mixed Electrical Discharge Machining for Medical Application. International Journal of Advances in Engineering and Pure Sciences, 31. pp. 1-10. ISSN 2146-5150
Kalaman, S, Yasar, H, Ekmekci, N, Opoz, TT and Ekmekci, B (2018) Powder Mixed Electrical Discharge Machining and Biocompatibility: A State of the Art Review. In: The 18th International Conference on Machine Design and Production , 2. (The 18th International Conference on Machine Design and Production, 03 July 2018 - 06 July 2018, Eskisehir, Turkey).
Opoz, TT, Yasar, H, Murphy, MF, Ekmekci, N and Ekmekci, B (2018) TI6AL4V Surface Modification by Hydroxyapatite Powder Mixed Electric Discharge Machining for Medical Application. In: 18th International Conference on Machine Design and Production , 2. (18th International Conference on Machine Design and Production, 03 July 2018 - 06 July 2018, Eskisehir, Turkey).
Opoz, TT, Yasar, H, Ekmekci, N and Ekmekci, B (2018) Particle Migration and Surface Modification on Ti6Al4V in SiC Powder Mixed Electrical Discharge Machining. Journal of Manufacturing Processes, 31. pp. 744-758. ISSN 1526-6125
Chen, X, Opoz, TT and Oluwajobi, A (2017) Analysis of grinding surface creation by single grit approach. Journal of Manufacturing Science and Engineering, 139 (12). ISSN 1528-8935
Chen, X and Opoz, TT (2016) Effect of different parameters on grinding efficiency and its monitoring by acoustic emission. Production & Manufacturing Research, 4 (1). ISSN 2169-3277
Opoz, TT and Chen, X (2016) Chip formation mechanism using finite element simulation. Strojniški vestnik - Journal of Mechanical Engineering, 62 (11). ISSN 0039-2480
Opoz, TT and Chen, X (2014) Experimental study on single grit grinding of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ISSN 2041-2975