Article

Batako, ADL and Tsiakoumis, V (2015) An experimental investigation into resonance dry grinding of hardened steel and nickel alloys with element of MQL. International Journal of Advanced Manufacturing Technology, 77 (1). pp. 27-41. ISSN 0268-3768

Chen, X, Hu, Z, Wang, C and Liu, J (2015) A novel forming method for three-dimensional thin sheet metal. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture. pp. 1-5. ISSN 0954-4054

Deng, W, Zhang, G, Murphy, MF, Lilley, F, Harvey, DM and Burton, DR (2015) Analysis of dynamic cantilever behavior in tapping mode atomic force microscopy. Microscopy Research and Technique, 78 (10). pp. 935-946. ISSN 1097-0029

Gdeisat, MA, Burton, DR, Lilley, F, Arevalillo-Herraez, M and Ammous, MMM (2015) Aiding phase unwrapping by increasing the number of residues in two-dimensional wrapped-phase distributions. APPLIED OPTICS, 54 (34). pp. 10073-10078. ISSN 1559-128X

Naylor, A, Talwalkar, S, Trail, I and Joyce, T (2015) In Vitro Wear Testing of a CoCr-UHMWPE Finger Prosthesis with Hydroxyapatite Coated CoCr Stems. Lubricants, 3 (2). ISSN 2075-4442

Shi, Y, Yu, DL, Tian, Y and Shi, Y (2015) Modified Volterra model-based non-linear model predictive control of IC engines with real-time simulations. Transactions of the Institute of Measurement and Control, 39 (2). pp. 208-223. ISSN 0142-3312

Smith, CJ, Derguti, F, Nava, EH, Thomas, M, Tammas-Williams, S, Culizia, S, Fraser, D and Todd, I (2015) Dimensional accuracy of Electron Beam Melting (EBM) additive manufacture with regard to weight optimized truss structures. Journal of Materials Processing Technology, 229. pp. 128-138. ISSN 0924-0136

Vereschaka, AА, Volosova, MA, Vereshchaka, AS, Batako, ADL and Mokritskii, BY (2015) Development of wear-resistant coatings compounds for high-speed steel tool using a combined cathodic vacuum arc deposition. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

Volkhonskii, AO, Blinkov, IV, Vereshchaka, AA, Vereshchaka, AS and Batako, ADL (2015) Filtered cathodic vacuum Arc deposition of nano-layered composite coatings for machining hard-to-cut materials. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

Zarmai, MT, Ekere, NN, Oduoza, CF and Amalu, EH (2015) A review of interconnection technologies for improved crystalline silicon solar cell photovoltaic module assembly. Applied Energy, 154. pp. 173-182. ISSN 0306-2619

Zhang, G, Lee, C, Harvey, D and Ma, H (2015) Development of C-Line plot technique for characterization of edge effects in acoustic imaging: A case study using flip chip package geometry. Microelectronics Reliability. ISSN 1872-941X

Conference or Workshop Item

Amalu, EH, Ekere, NN, Oduoza, CF and Zarmai, MT (2015) Evaluation of garofalo creep model for lead-free solder joints in surface mount components. In: NSTI: Advanced Materials - TechConnect Briefs 2015 , 4. pp. 282-285. (TechConnect Briefs 2015).

French, PW, Rosowski, A, Murphy, MF, Irving, M and Sharp, MC (2015) Laser Induced Micro Plasma Processing of Polymer Substrates for Biomedical Implant Applications. In: Proceedings of the SPIE, Industrial Laser Applications Symposium (ILAS 2015) , 9657. (4th Industrial Laser Applications Symposium (ILAS), 17th - 18th March 2015, Kenilworth, ENGLAND).

Sharp, MC, Rosowski, A and French, PW (2015) Nanosecond laser texturing of aluminium for control of wettability. In: Proceedings of the SPIE, Industrial Laser Applications Symposium (ILAS 2015) , 9657. (4th Industrial Laser Applications Symposium (ILAS), 17 March 2015 - 18 March 2015, Kenilworth, ENGLAND).

Thesis

Al-Waidh, A (2015) Manufacture of metamaterials using laser processing techniques. Doctoral thesis, Liverpool John Moores University.

Deng, W (2015) Cantilever Dynamic Analysis in Tapping Mode Atomic Force Microscopy. Doctoral thesis, Liverpool John Moores University.

Jamal, M (2015) Characterisation and Evaluation of Thermally Treated Recycled Glass for Mass Finishing and Superfinishing Processes. Doctoral thesis, Liverpool John Moores University.

Ross, S (2015) Development of a Novel Gradient-Force Tapered Fibre Optical Tweezers System for 3D Optical Trapping at Near Horizontal Fibre Insertion Angles. Doctoral thesis, Liverpool John Moores University.