Khan, MH, Das, A, Khan, TI, Li, Z and Kotadia, HR (2025) Microstructural modification in an Al-Mg-Si (6082) alloy with high Fe content using inoculation and/or high-intensity ultrasonication. Journal of Alloys and Compounds, 1012. ISSN 0925-8388

Ahuir-Torres, JI, Jabar, S, Franciosa, P, Ceglarek, D and Kotadia, HR (2024) The microstructure-corrosion relationships in laser-welded dissimilar steel-to-aluminium joints. npj Materials Degradation, 8 (1).

Al-Mahdy, A, Ahuir Torres, JI, Opoz, T, Kotadia, HR, Mullett, J and Sharp, MC (2024) An investigation into the use of incoherent UV light to augment IR nanosecond pulsed laser texturing of CFRP composites for improved adhesion. Optics and Laser Technology, 181. ISSN 0030-3992

Ahuir-Torres, JI, Chadwick, J, West, G, Kotadia, HR and Opoz, TT (2024) Effect of electrical discharge machining (EDM) bath composition on long-term corrosion of Ti-6Al-4V in simulated body fluid. Electrochimica Acta, 503. ISSN 0013-4686

Ignacio Ahuir-Torres, J, Yang, X, West, G and Kotadia, HR (2024) Corrosion behaviour of SiC particulate reinforced AZ31 magnesium matrix composite in 3.5 % NaCl with and without heat treatment. Materials Chemistry and Physics, 320. ISSN 0254-0584

Mohan, N, Ahuir-Torres, JI, Bhogaraju, SK, Webler, R, Kotadia, HR, Erdogan, H and Elger, G (2024) Decomposition mechanism and morphological evolution of in situ realized Cu nanoparticles in Cu complex inks. New Journal of Chemistry, 48 (15). pp. 6796-6808. ISSN 1144-0546

Opoz, T, Burgess, A, Ahuir Torres, J, Kotadia, HR and Tammas-Williams, S (2024) The effect of surface finish and post-processing on mechanical properties of 17-4 PH stainless steel produced by the atomic diffusion additive manufacturing process (ADAM). International Journal of Advanced Manufacturing Technology, 130. pp. 4053-4066. ISSN 0268-3768

Jabar, S, Sun, T, Franciosa, P, Kotadia, HR, Ceglarek, D, Paolini, B and Faulhaber, R (2023) Effect of a ring-shaped laser beam on the weldability of aluminum-to-hilumin for battery tab connectors. In: Journal of Laser Applications , 35 (4). 042038-042038-11. (42nd Annual International Congress of Applications of Lasers & Electro-Optics (ICALEO) 2023, 16-19 October 2023, Chicago, Illinois. America).

Ahuir-Torres, JI, Gibbons, GJ, West, G, Das, A and Kotadia, HR (2023) Understanding the corrosion behaviour of Al-Mg alloy fabricated using a Laser Powder Bed Fusion (L-PBF) Additive Manufacturing (AM) process. Journal of Alloys and Compounds, 969. ISSN 0925-8388

Ahuir Torres, JI, Kotadia, HR and Opoz, TT (2023) Effect of the electrical discharge machining on Ti6Al4V corrosion behaviour in simulated body fluid. Surface and Coatings Technology, 470. ISSN 0257-8972

Yang, X, Gibbons, GJ, Tanner, DA, Li, Z, Wilson, P, Williams, MA and Kotadia, HR (2023) Scan strategy induced microstructure and consolidation variation in the laser-powder bed fusion (L-PBF) additive manufacturing of low alloy 20MnCr5 steel. Materials and Design, 232. ISSN 0264-1275

Jabar, S, Baghbani Barenji, A, Franciosa, P, Kotadia, HR and Ceglarek, D (2023) Effects of the adjustable ring-mode laser on intermetallic formation and mechanical properties of steel to aluminium laser welded lap joints. Materials and Design, 227. ISSN 0264-1275

Kotadia, HR, Franciosa, P, Jabar, S and Ceglarek, D (2022) Remote laser welding of Zn coated IF steel and 1050 aluminium alloy: processing, microstructure and mechanical properties. Journal of Materials Research and Technology, 19. pp. 449-465. ISSN 2238-7854

Kumar, M, Gibbons, GJ, Das, A, Manna, I, Tanner, D and Kotadia, HR (2021) Additive manufacturing of aluminium alloy 2024 by laser powder bed fusion: microstructural evolution, defects and mechanical properties. Rapid Prototyping Journal, 27 (7). pp. 1388-1397. ISSN 1355-2546

Kotadia, HR, Gibbons, G, Das, A and Howes, PD (2021) A review of Laser Powder Bed Fusion Additive Manufacturing of aluminium alloys: Microstructure and properties. Additive Manufacturing, 46. ISSN 2214-7810

Taylor, S, West, GD, Mogire, E, Tang, F and Kotadia, HR (2021) Superplastic forming characteristics of AZ41 magnesium alloy. Transactions of Nonferrous Metals Society of China, 31 (3). pp. 648-654. ISSN 1003-6326

Khan, MH, Das, A, Li, Z and Kotadia, HR (2021) Effects of Fe, Mn, chemical grain refinement and cooling rate on the evolution of Fe intermetallics in a model 6082 Al-alloy. Intermetallics, 132. ISSN 0966-9795

Kotadia, HR, Qian, M and Das, A (2020) Microstructural modification of recycled aluminium alloys by high-intensity ultrasonication: Observations from custom Al–2Si–2Mg–1.2Fe–(0.5,1.0)Mn alloys. Journal of Alloys and Compounds, 823. ISSN 0925-8388

Cassinath, Z, Li, Z, Sridhar, S, Das, A and Kotadia, HR (2019) Microstructural modification of Sn–Bi and Sn–Bi–Al immiscible alloys by shearing. Materials Science and Technology, 35 (18). pp. 2157-2164. ISSN 0267-0836

Kotadia, HR, Rahnama, A, Sohn, IR, Kim, J and Sridhar, S (2019) Performance of dissimilar metal Self-Piercing Riveting (SPR) joint and coating behaviour under corrosive environment. Journal of Manufacturing Processes, 39. pp. 259-270. ISSN 1526-6125

Kotadia, HR, Mannan, SH and Das, A (2019) Influence of Zn Concentration on Interfacial Intermetallics During Liquid and Solid State Reaction of Hypo and Hypereutectic Sn-Zn Solder Alloys. Journal of Electronic Materials, 48 (5). pp. 2731-2736. ISSN 0361-5235

Kotadia, HR, Qian, M, Eskin, DG and Das, A (2017) On the microstructural refinement in commercial purity Al and Al-10 wt% Cu alloy under ultrasonication during solidification. Materials & Design, 132. pp. 266-274. ISSN 0264-1275