Items where Author is "Tammas-Williams, S"

Article

Ahuir Torres, JI, Burgess, A, Sharp, MC, Opoz, T ORCID: 0000-0001-6579-2238, Malkeson, SP, Falkingham, PL, Darlington, RI and Tammas-Williams, S (2024) A Study of the Corrosion Resistance of 316L Stainless Steel Manufactured by Powder Bed Laser Additive Manufacturing. Applied Sciences, 14 (17).

Opoz, T ORCID: 0000-0001-6579-2238, Burgess, A, Ahuir Torres, J, Kotadia, HR and Tammas-Williams, S (2024) The effect of surface finish and post-processing on mechanical properties of 17-4 PH stainless steel produced by the atomic diffusion additive manufacturing process (ADAM). International Journal of Advanced Manufacturing Technology, 130. pp. 4053-4066. ISSN 0268-3768

Burgess, A, Dodd, R, Radwani, M, Opoz, TT ORCID: 0000-0001-6579-2238 and Tammas-Williams, S (2022) The properties of stainless steel 17-4PH produced by a low cost additive manufacturing technique, the Marforged MetalX. Journal of Physics : Conference Series, 2198 (1). 012065-012065. ISSN 1742-6588

Ren, T, Ren, J, Matellini, DB and Tammas-Williams, S (2021) Characteristics, Challenges, and Opportunities of Vaccine Cold Chain. Global Business and Management Research: An International Journal, 13 (3). pp. 33-43. ISSN 1947-5667

Shahedan, NF, Abdullah, MMAB, Mahmed, N, Kusbiantoro, A, Tammas-Williams, S, Li, L-Y, Aziz, IH, Vizureanu, P, Wysłocki, JJ, Błoch, K and Nabiałek, M (2021) Properties of a New Insulation Material Glass Bubble in Geo-Polymer Concrete. Materials, 14 (4). ISSN 1996-1944

Mycroft, W, Katzman, M, Tammas-Williams, S, Hernandez-Nava, E, Panoutsos, G, Todd, I and Kadirkamanathan, V (2020) A data-driven approach for predicting printability in metal additive manufacturing processes. Journal of Intelligent Manufacturing. ISSN 0956-5515

Snell, R, Tammas-Williams, S, Chechik, L, Lyle, A, Hernández-Nava, E, Boig, C, Panoutsos, G and Todd, I (2019) Methods for Rapid Pore Classification in Metal Additive Manufacturing. JOM Journal of the Minerals, Metals and Materials Society. ISSN 1047-4838

Hernández-Nava, E, Mahoney, P, Smith, CJ, Donoghue, J, Todd, I and Tammas-Williams, S (2019) Additive manufacturing titanium components with isotropic or graded properties by hybrid electron beam melting/hot isostatic pressing powder processing. Scientific Reports, 9 (1). ISSN 2045-2322

Smith, CJ, Tammas-Williams, S, Hernandez-Nava, E and Todd, I (2017) Tailoring the thermal conductivity of the powder bed in Electron Beam Melting (EBM) Additive Manufacturing. Scientific Reports, 7. ISSN 2045-2322

Hernandez-Nava, E, Tammas-Williams, S, Smith, C, Leonard, F, Withers, PJ, Todd, I and Goodall, R (2017) X-ray Tomography Characterisation of Lattice Structures Processed by Selective Electron Beam Melting. Metals, 7 (8). ISSN 2075-4701

Tammas-Williams, S, Withers, PJ, Todd, I and Prangnell, PB (2017) The Influence of Porosity on Fatigue Crack Initiation in Additively Manufactured Titanium Components. Scientific Reports, 7. ISSN 2045-2322

Tammas-Williams, S and Todd, I (2016) Design for additive manufacturing with site-specific properties in metals and alloys. Scripta Materialia, 135. pp. 105-110. ISSN 1359-6462

Tammas-Williams, S, Withers, RI, Todd, I and Prangnell, PB (2016) Porosity regrowth during heat treatment of hot isostatically pressed additively manufactured titanium components. Scripta Materialia, 122. pp. 72-76. ISSN 1359-6462

Hernandez-Nava, E, Smith, CJ, Derguti, F, Tammas-Williams, S, Leonard, F, Withers, PJ, Todd, I and Goodall, R (2016) The effect of defects on the mechanical response of Ti-6Al-4V cubic lattice structures fabricated by electron beam melting. Acta Materialia, 108. pp. 279-292. ISSN 1359-6454

Smith, CJ, Derguti, F, Nava, EH, Thomas, M, Tammas-Williams, S, Culizia, S, Fraser, D and Todd, I (2015) Dimensional accuracy of Electron Beam Melting (EBM) additive manufacture with regard to weight optimized truss structures. Journal of Materials Processing Technology, 229. pp. 128-138. ISSN 0924-0136