A

Alghanmi, A, Yang, Z and Blanco Davis, E (2017) A Fuzzy Rule-Based Bayesian Reasoning Approach for Risk Assessment of Petroleum Transportation Systems. In: IEEE’s 7th International Conference on Logistics, Informatics and Service Science (LISS 2017), 24 July 2017 - 27 July 2017, Kyoto, Japan and Beijing, China..

Ateeq, M and Al-Shamma'a, A (2017) Experimental study on the Microwave processing of waste tyre rubber aggregates to enhance their surface properties for their use in rubberised bituminous mixtures. Microwave and Optical Technology Letters, 59 (12). pp. 2951-2960. ISSN 0895-2477

Ateeq, M, Shaw, A, Garrett, R and Dickson, P (2017) A Proof of Concept Study on Utilising a Non-invasive Microwave Analysis Technique to Characterise Silver Based Materials in Aqueous Solution. Sensing and Imaging: An International Journal, 18 (13). ISSN 1557-2064

C

Chen, X, Opoz, TT and Oluwajobi, A (2017) Analysis of grinding surface creation by single grit approach. Journal of Manufacturing Science and Engineering, 139 (12). ISSN 1528-8935

Chen, X, Sufian, M and Yu, DL (2017) Investigating the Capability of Precision in Robotic Grinding. In: Proceedings of the 23rd International conference on Automation & Computing . (23rd International Conference on Automation & Computing, 7-8th September, 2017, Huddersfield, UK).

D

Dithmer, P, Reinhardt, L and Kontovas, CA (2017) The Liner Shipping Routing and Scheduling Problem Under Environmental Considerations: The Case of Emission Control Areas. In: Computational Logistics, ICCL 2017 , 10572. pp. 336-350. (8th International Conference on Computational Logistics (ICCL), 18th - 20th September 2017, Southampton, ENGLAND).

Dong, M, Ma, H, Zhang, G, Chen, Y, Zhang, X and Cao, X (2017) A model for determining electromechanical response profile of ultrasonic transducers and ultrasonic transient echo. Shengxue Xuebao/Acta Acustica, 42 (4). pp. 403-410. ISSN 0371-0025

Dudek, M, Rosowski, A, Koperkiewicz, A, Grobelny, J, Wach, R, Sharp, MC, French, PW, Janasz, L and Kozanecki, M (2017) Carbon nanoparticles fabricated by infrared laser ablation of graphite and polycrystalline diamond targets. Physica Status Solidi (A) Applications and Materials Science, 214 (2). ISSN 1862-6300

G

Gao, R, Manut, AB, Ji, Z, Ma, J, Duan, M, Zhang, JF, Franco, J, Hatta, SFWM, Zhang, WD, Kaczer, B, Vigar, D, Linten, D and Groeseneken, G (2017) Reliable time exponents for long term prediction of negative bias temperature instability by extrapolation. IEEE Transactions on Industrial Electronics, 64 (4). pp. 1467-1473. ISSN 0278-0046

H

Horton, M, Connolly, DP and Yu, Z (2017) Rail trackbed and performance testing of stabilised sub-ballast in normal and high-speed environments. Procedia Engineering, 189. ISSN 1877-7058

I

Irving, MD (2017) Evaluating the use of laser processing and polishing techniques to generate micro-patterned surfaces for controlling fibroblast cell behaviour. Doctoral thesis, Liverpool John Moores University.

J

Jamal, M and Morgan, MN (2017) Design Process Control for Improved Surface Finish of Metal Additive Manufactured Parts of Complex Build Geometry. Inventions, 2 (4). ISSN 2411-5134

Jamal, M and Morgan, MN (2017) Materials characterisation part II: tip geometry of the Vickers indenter for microindentation tests. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

Jamal, M and Morgan, MN (2017) Materials characterization part I: contact area of the Berkovich indenter for nanoindentation tests. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

Jamal, M, Morgan, MN and Peavoy, D (2017) A digital process optimization, process design and process informatics system for high-energy abrasive mass finishing. International Journal of Advanced Manufacturing Technology, 92. pp. 303-319. ISSN 0268-3768

Johnston, GJ (2017) A computer model for investigating the biomechanical effects of radiation exposure on pathological and non-pathological living human cells. Doctoral thesis, Liverpool John Moores University.

L

Liu, X, Carre, MJ, Zhang, Q, Lu, Z, Matcher, SJ and Lewis, R (2017) Measuring Contact Area in a Sliding Human Finger-Pad Contact. Skin Research and Technology, 24 (1). pp. 31-44. ISSN 1600-0846

Liu, X, Maiti, R, Lu, ZH, Carré, MJ, Matcher, SJ and Lewis, R (2017) New Non-invasive Techniques to Quantify Skin Surface Strain and Sub-surface Layer Deformation of Finger-pad during Sliding. Biotribology, 12. pp. 52-58. ISSN 2352-5738

Liu, Z, Liu, J, Li, H, Li, Z, Tan, Z, Liu, RW and Liu, Yi (2017) Hierarchical and coupling model of factors influencing vessel traffic flow. PLoS One, 12 (4). ISSN 1932-6203

M

Mohammed, T (2017) Evaluating the effects of acoustic stimulation on fibroblast cell migration and muscle fibre formation. Doctoral thesis, Liverpool John Moores University.

O

Ogbomo, OO, Amalu, EH, Ekere, NN and Olagbegi, PO (2017) Effect of Coefficient of Thermal Expansion (CTE) Mismatch of Solder Joint Materials in Photovoltaic (PV) Modules Operating in Elevated Temperature Climate on the Joint's Damage. Procedia Manufacturing, 11. pp. 1145-1152. ISSN 2351-9789

Oluwajobi, AO and Chen, X (2017) On Time Step in the Molecular Dynamics (MD) Simulation of Nanomachining. Solid State Phenomena, 261. pp. 108-114. ISSN 1012-0394

T

Teng, KH, Amiri, A, Kazi, SN, Bakar, MA, Chew, BT, Al-Shamma'a, A and Shaw, A (2017) Retardation of heat exchanger surfaces mineral fouling by water-based diethylenetriamine pentaacetate-treated CNT nanofluids. Applied Thermal Engineering, 110. pp. 495-503. ISSN 1359-4311

Teng, KH, Kazi, SN, Amiri, A, Habali, AF, Bakar, MA, Chew, BT, Al-Shamma'a, A, Shaw, A, Solangi, KH and Khan, G (2017) Calcium carbonate fouling on double-pipe heat exchanger with different heat exchanging surfaces. Powder Technology, 315. pp. 216-226. ISSN 0032-5910

Tipparthi, VK (2017) Design and Development of a Dual Flow System for Fluid Delivery in Grinding Application. Doctoral thesis, Liverpool John Moores University.

V

Vereschaka, A, Batako, ADL, Vereschaka, A and Dodonov, A (2017) Development of modifying compounds for multilayer nano-structured coatings for cutting tools. International Journal of Nanotechnology, 14. pp. 574-583. ISSN 1475-7435

Vereschaka, AA, Grigoriev, SN, Sitnikov, NN and Batako, ADL (2017) Delamination and longitudinal cracking in multi-layered composite nanostructured coatings and their influence on cutting tool life. Wear, 390-39. pp. 209-219. ISSN 0043-1648

Vereschaka, AA, Grigoriev, SN, Sitnikov, NN, Oganyan, GV and Batako, ADL (2017) Working efficiency of cutting tools with multilayer nano-structured Ti-TiCN-(Ti,Al)CN and Ti-TiCN-(Ti,Al,Cr)CN coatings: Analysis of cutting properties, wear mechanism and diffusion processes. Surface and Coatings Technology, 332. pp. 198-213. ISSN 0257-8972