Article

Abadel, AA, Nasr, MS, Shubbar, A, Hashim, TM and Tuladhar, R (2023) Potential Use of Rendering Mortar Waste Powder as a Cement Replacement Material: Fresh, Mechanical, Durability and Microstructural Properties. Sustainability, 15 (15). ISSN 2071-1050

Abbasi, MH, Abdullah, B, Ahmad, MW, Rostami, A and Cullen, J (2021) Heat transition in the European building sector: Overview of the heat decarbonisation practices through heat pump technology. Sustainable Energy Technologies and Assessments, 48. ISSN 2213-1388

Abbasi, MH, Abdullah, B, Castaño-Rosa, R, Ahmad, MW, Rostami, A and Cullen, J (2022) Planning energy interventions in buildings and tackling fuel poverty: Can two birds be fed with one scone? Energy Research & Social Science, 93. ISSN 2214-6296

Abdel Hafeza, RD, Shubbar, A, Nasr, MS and Abd-Al Ftahd, RO (2024) Reinforcing the brittle resistance of high strength concrete using agricultural waste fiber. Sustainable Structures, 4 (3). ISSN 2789-3111

Abdel-Wahed, T and Al Nageim, H (2016) Investigating the effects of cement and cement kiln dust as a filler on the mechanical properties of cold bituminous emulsion mixtures. International Journal of Civil Engineering and Technology, 7 (1). pp. 441-453. ISSN 0976-6308

Abdel-Wahed, T, Dulaimi, A, Shanbara, HK and Al Nageim, H (2022) The Impact of Cement Kiln Dust and Cement on Cold Mix Asphalt Characteristics at Different Climate. Sustainability (Switzerland), 14 (7). p. 4173.

Abdellatif, M and Al-Shamma'a, A (2014) Review of sustainability in buildings. Sustainable Cities and Society, 14 (1). pp. 171-177. ISSN 2210-6707

Abdulai, RT and Ochieng, EG (2017) Land Registration and Landownership Security: An Examination of the Underpinning Principles of Registration. Property Management, 35 (1). pp. 24-47. ISSN 1758-731X

Abduljabbar, N, Al-Busaltan, S, Dulaimi, AF, Al-Yasari, R, Sadique, MM and Nageim, HA (2021) The effect of waste low-density polyethylene on the mechanical properties of thin asphalt overlay. Construction and Building Materials, 315. ISSN 0950-0618

Abrishami, S, Goulding, J, Rahimian, FP, Ganah, A and Sawhney, A (2014) G-BIM framework and development process for integrated AEC design automation. Procedia Engineering, 85. pp. 10-17. ISSN 1877-7058

Adesi, M, Ewuga, D, Owusu-Manu, D-G, Boateng, F and Kissi, E (2023) COVID-19 pandemic disruptions and environmental turbulence in architectural, engineering and construction project delivery space. International Journal of Building Pathology and Adaptation. ISSN 2398-4708

Ahuja, R, Sawhney, A and Arif, M (2018) Developing Organizational Capabilities to Deliver Lean and Green Project Outcomes using BIM. Engineering, Construction and Architectural Management, 25 (10). pp. 1255-1276. ISSN 0969-9988

Ahuja, R, Sawhney, A and Arif, M (2016) Driving lean and green project outcomes using BIM: A qualitative comparative analysis. International Journal of Sustainable Built Environment. ISSN 2212-6090

Ahuja, R, Sawhney, A, Jain, M, Arif, M and Rakshit, S (2018) Factors influencing BIM adoption in emerging markets—the case of India. International Journal of Construction Management. ISSN 1562-3599

Akashah, FW, Baaki, TK and Lee, SP (2017) Fire risk assessment of low cost high rise residential buildings in Kuala Lumpur: A case study. Journal of Design and Built Environment, 17. ISSN 1823-4208

Akbar, M, Pan, H, Ou, G, Nikitas, G and Ahmad, B (2023) Seismic Response Compression of Various MSE Walls Based on 3D Modeling. Buildings, 13 (11).

Al Biajawi, MI, Embong, R and Shubbar, A (2023) Engineering properties of self-compacting concrete incorporating coal bottom ash (CBA) as sustainable materials for green concrete: a review. Journal of Building Pathology and Rehabilitation, 8 (2). ISSN 2365-3159

Al Khafaji, ZS and Ruddock, F (2018) Study the retardant effect of using different sugar's types on setting time and temperature of cement paste. International Journal of Civil Engineering and Technology, 9 (1). ISSN 0976-6308

Al-Baghdadi, HM, Shubbar, AAF and Al-Khafaji, ZS (2021) The Impact of Rice Husks Ash on Some Mechanical Features of Reactive Powder Concrete with High Sulfate Content in Fine Aggregate. International Review of Civil Engineering (IRECE), 12 (4). pp. 248-254. ISSN 2036-9913

Al-Faluji, D, Al-Rubaye, MM, Nasr, MS, Shubbar, AAF, Al-Khafaji, ZS, Alkhayyat, A and Abdulraheem, MS (2021) Impact of Substitute Portland Cement with CKD on the Mechanical and Durability Characteristics of Cement Mortar. IOP Conference Series: Materials Science and Engineering, 1090 (1). ISSN 1757-8981

Al-Khafaji, ZS, Falah, MW, Shubbar, AAF, Nasr, MS, Al-Mamoori, SF, Alkhayyat, A, Al-Rifaie, A, Eissa, A, Latif Al-Mufti, RA and Hashim, KS (2021) The Impact of Using Different Ratios of Latex Rubber on the Characteristics of Mortars Made with GGBS and Portland Cement. IOP Conference Series: Materials Science and Engineering, 1090 (1). ISSN 1757-8981

Al-Khafaji, ZS, Majdi, A, Shubbar, AAF, Nasr, MS, Al-Mamoori, SF, Alkhayyat, A, Al-Rifaie, A, Al-Emadi, N, Al-Mufti, RL, Sadique, MM and Hashim, KS (2021) Influence of High Volume RHA on Properties of Cement Mortar. IOP Conference Series: Materials Science and Engineering, 1090 (1). ISSN 1757-8981

Al-Khafaji, ZS, Majdi, A, Shubbar, AAF, Nasr, MS, Al-Mamoori, SF, Alkhulaifi, A, Al-Mufti, RL, Al-Rifaie, A, Alkhayyat, A and Hashim, KS (2021) Impact of high volume GGBS replacement and steel bar length on flexural behaviour of reinforced concrete beams. IOP Conference Series: Materials Science and Engineering, 1090 (1). ISSN 1757-8981

Al-Mamoori, SF, Shubbar, AAF, Al-Khafaji, ZS, Nasr, MS, Alkhayyat, A, Al-Rifaie, A, Latif Al-Mufti, RA, Sadique, MM and Hashim, KS (2021) Production of Ternary Blend Binder as an Alternative to Portland Cement. IOP Conference Series: Materials Science and Engineering, 1090 (1). ISSN 1757-8981

Al-Merzah, S, Al-Busaltan, S and Al Nageim, H (2019) Characterizing Cold Bituminous Emulsion Mixtures Comprised of Palm Leaf Ash. Journal of Materials in Civil Engineering, 31 (6). ISSN 0899-1561

Al-Nawasir, R, Al-Humeidawi, B and Shubbar, A (2024) Influence of Sustainable Grout Material on the Moisture Damage of Semi-flexible Pavement. Periodica Polytechnica Civil Engineering. ISSN 0553-6626

Al-Rifaie, A, Al-Hassani, H and Shubbar, AAF (2021) Flexural behaviour of reinforced concrete beams with horizontal construction joints. IOP Conference Series: Materials Science and Engineering, 1090 (1). ISSN 1757-8981

Al-Rifaie, A, Al-Husainy, A, Dulaimi, AF and Shanbara, HK (2020) Shear performance of beam-column joints subjected to high loading rates. Journal of Engineering Science and Technology, 15 (6). pp. 3649-3660. ISSN 1823-4690

Al-Rifaie, A, Al-Husainy, AS, Al-Mansoori, T and Shubbar, AAF (2021) Flexural impact resistance of steel beams with rectangular web openings. Case Studies in Construction Materials, 14. ISSN 2214-5095

Aldeka, AB, Tziavos, NI, Gkantou, M, Dirar, S and Chan, AHC (2021) Seismic design of non-structural components mounted on irregular reinforced concrete buildings. Journal of Building Engineering, 46. ISSN 2352-7102

Alfalah, AA, D’Arcy, E, Stevenson, S and Heinig, S (2021) Modelling Housing Market Fundamentals and the Response to Economic and Political Events: Empirical Evidence from Kuwait. International Journal of Housing Markets and Analysis. ISSN 1753-8270

Ali, SB, Kamaris, GS, Gkantou, M and Huang, Y (2024) Comparative Study of Life-Cycle Environmental and Cost Performance of Aluminium Alloy–Concrete Composite Columns. Sustainability, 16 (21).

Ali, YA, Falah, MW, Ali, AH, Al-Mulali, MZ, Al-Khafaji, ZS, Hashim, TM, Al Sa'adi, AHM and Al-Hashimi, O (2022) Studying the effect of shear stud distribution on the behavior of steel-reactive powder concrete composite beams using ABAQUS software. Journal of the Mechanical Behavior of Materials, 31 (1). pp. 416-425. ISSN 0334-8938

Almatrafi, M, Theofanous, M, Dirar, S and Gkantou, M (2021) Structural response of cold-formed lipped Z purlins – Part 1: Experimental investigation. Thin-Walled Structures, 161. ISSN 0263-8231

Alves, R, Faria, P and Brás, A (2019) Brita Lavada – An eco-efficient decorative mortar from Madeira Island. Journal of Building Engineering, 24. ISSN 2352-7102

Amoako-Attah, J and B-Jahromi, A (2016) The Impact of Different Weather Files on London Detached Residential Building Performance-Deterministic, Uncertainty, and Sensitivity Analysis on CIBSE TM48 and CIBSE TM49 Future Weather Variables Using CIBSE TM52 as Overheating Criteria. Sustainability, 8 (11). ISSN 2071-1050

Antunes, A, Faria, P, Silva, V and Brás, A (2019) Rice husk-earth based composites: A novel bio-based panel for buildings refurbishment. Construction and Building Materials, 221. pp. 99-108. ISSN 0950-0618

Apanaviciene, R, Daugeliene, A, Baltramonaitis, T and Maliene, V (2015) Sustainability Aspects of Real Estate Development: Lithuanian Case Study of Sports and Entertainment Arenas. SUSTAINABILITY, 7 (6). ISSN 2071-1050

Arif, M, Bendi, D, Sawhney, A and Iyer, KC (2012) State of offsite construction in India-Drivers and barriers. Journal of Physics: Conference Series, 364 (1). ISSN 1742-6588

Armada Bras, AM, Antunes, A, Laborel-Preneon, A, Ralegaonkar, R, Shaw, A, Riley, ML and Fariae, P (2019) Optimisation of bio-based building materials using image analysis method. Construction and Building Materials, 223. pp. 544-553. ISSN 0950-0618

Armada Bras, AM and Faustino, P (2016) Repair mortars and new concretes with coal bottom and biomass ashes using rheological optimisation. International Journal of Environmental Research, 10 (2). pp. 203-216. ISSN 1735-6865

Bal, M and Bryde, DJ (2015) Measuring Performance to Engage the Extended Project Team in Construction. Journal of Construction Engineering and Project Management, 5 (1). pp. 1-10. ISSN 2233-9582

Bin Ali, S, Kamaris, GS and Gkantou, M (2022) Flexural buckling behaviour of concrete-filled double skin aluminium alloy columns. Engineering Structures, 275 (Part B). ISSN 0141-0296

Blay-Armah, A, Mohebbi, G, Bahadori-Jahromi, A, Fu, C, Amoako-Attah, J and Barthorpe, M (2023) Evaluation of Embodied Carbon Emissions in UK Supermarket Constructions: A Study on Steel, Brick, and Timber Frameworks with Consideration of End-of-Life Processes. Sustainability, 15 (20).

Bleil De Souza, C and Tucker, SS (2014) Thermal simulation software outputs: a framework to produce meaningful information for design decision-making. Journal of Building Performance Simulation, 8 (2). pp. 57-78. ISSN 1940-1493

Brady, LJ and Abdellatif, M (2017) Assessment of Energy Consumption in Existing Buildings. Energy and Buildings, 149. pp. 142-150. ISSN 0378-7788

Brás, A (2016) Embodied carbon minimisation of retrofit solutions for walls. Proceedings of the Institution of Civil Engineers, 170 (3). pp. 141-156. ISSN 1478-4629

Brás, A and Faria, P (2017) Effectiveness of mortars composition on the embodied carbon long-term impact. Energy and Buildings. ISSN 0378-7788

Brás, A and Faustino, P (2019) Impact of repairs on embodied carbon dioxide expenditure for a reinforced-concrete quay. Proceedings of the Institution of Civil Engineers, 172 (2). pp. 87-97. ISSN 1478-4629

Brás, A and Gomes, V (2015) LCA implementation in the selection of thermal enhanced mortars for energetic rehabilitation of school buildings. Energy and Buildings, 92. pp. 1-9. ISSN 0378-7788

Brás, A, Goncalves, F and Faustino, P (2013) Cork-based mortars for thermal bridges correction in a dwelling: Thermal performance and cost evaluation. Energy and Buildings, 72. pp. 296-308. ISSN 0378-7788

Brás, A, Leal, M and Faria, P (2013) Cement-cork mortars for thermal bridges correction. Comparison with cement-EPS mortars performance. Construction and Building Materials, 49. pp. 315-327. ISSN 0950-0618

Brás, A, Mohammed, H, Romano, A and Nakouti, I (2022) Biomineralisation to Increase Earth Infrastructure Resilience. Materials (Basel, Switzerland), 15 (7). ISSN 1996-1944

Brás, A, Ravijanya, C, Torres de Sande, V, Riley, ML and Ralegaonkar, R (2020) Sustainable and affordable prefab housing systems with minimal whole life energy use. Energy and Buildings, 220. ISSN 0378-7788

Brás, A, Rocha, A and Faustino, P (2015) Integrated approach for school buildings rehabilitation in a Portuguese city and analysis of suitable third party financing solutions in EU. Journal of Building Engineering, 3. pp. 79-93. ISSN 2352-7102

Brás, A, Yakubu, I, Mohammed, H, Idowu, IA, Jones, R, Gagnon, A, Owusu-Nimo, F, Huang, Y, Beckett, CTS and Addo, IA (2024) Bio-stabilising earthen houses with tannins from locally available resources. Case Studies in Construction Materials, 20. ISSN 2214-5095

Cebasek, TM, Esen, AF, Woodward, PK, Laghrouche, O and Connolly, DP (2018) Full scale laboratory testing of ballast and concrete slab tracks under phased cyclic loading. Transportation Geotechnics, 17 (A). pp. 33-40. ISSN 2214-3912

Chadee, A, Hernandez, SR and Martin, H (2021) The influence of optimism bias on time and cost on construction projects. Emerging Science Journal, 5 (4). pp. 429-442. ISSN 2610-9182

Chadee, AA, Chadee, XT, Mwasha, A and Martin, HH (2021) Implications of 'Lock-in' on Public Sector Project Management in a Small Island Development State. Buildings, 11 (5).

Chippagiri, R, Bras, A and Ralegaonkar, RV (2022) Development of sustainable prefabricated housing system by small-scale experimental model. Proceedings of the Institution of Civil Engineers: Engineering Sustainability. pp. 1-14. ISSN 1478-4629

Chippagiri, R, Brás, A, Sharma, D and Ralegaonkar, RV (2022) Technological and Sustainable Perception on the Advancements of Prefabrication in Construction Industry. Energies, 15 (20). ISSN 1996-1073

Chippagiri, R, Gavali, H, Ralegaonkar, R, Riley, ML, Shaw, A and Armada Bras, AM (2021) Application of Sustainable Prefabricated Wall Technology for Energy Efficient Social Housing. Sustainability, 13 (3). ISSN 2071-1050

Chippagiri, R, Gavali, HR, Ralegaonkar, RV and Armada Bras, A (2022) Performance Evaluation of a Sustainable Prefabricated System Using Small-Scale Experimental Model Technique. Buildings, 12 (11).

Cotgrave, A and Wilson, HK (2020) Learning Space Design: The presentation of a framework for the Built Environment Discipline. International Journal of Construction Education and Research, 16 (2). pp. 132-148. ISSN 1522-8150

Cotterill, J, Ethaib, S, Hashim, KS, Alqashou, F, Al-Hayawi, AY, Abdellatif, M, Gkantou, M and Shubbar, AAF (2021) Evaluation of the Use of Lignocellusic Biomass in Thermal Insulation for Green Building. IOP Conference Series: Materials Science and Engineering, 1058 (1). ISSN 1757-8981

Damoah, IS, Akwei, CA, Ishmael, T, Amoako, IO and Kumi, D (2020) Factors influencing school building construction projects abandonment. International Journal of Construction Management. ISSN 1562-3599

Davies, FN, Sadique, MM and Amoako-Attah, J (2023) Investigating effective building fabric as a passive cooling technique to combat overheating in UK residential buildings. Engineering Future Sustainability, 1 (2). ISSN 2753-4693

De Souza, C and Tucker, SS (2015) Thermal simulation software outputs: a conceptual data model of information presentation for building design decision-making. Journal of Building Performance Simulation. ISSN 1940-1493

Deb, P, Debnath, B, Hasan, M, Alqarni, AS, Alaskar, A, Alsabhan, AH, Khan, MA, Alam, S and Hashim, KS (2022) Development of Eco-Friendly Concrete Mix Using Recycled Aggregates: Structural Performance and Pore Feature Study Using Image Analysis. Materials (Basel, Switzerland), 15 (8). ISSN 1996-1944

Demir, SD, Bryde, DJ and Sertyesilisik, B (2013) Introducing AgiLean to Construction Project Management. Journal of Modern Project Management, 1 (3).

Demir, ST, Bryde, DJ, Fearon, DJ and Ochieng, EG (2015) A tool for integrating time, cost and quality perspectives in Probability Impact (P-I) Tables. International Journal of Project Organisation and Management, 6 (4). ISSN 1740-2905

Dixit, S, Mandal, SN, Sawhney, A and Singh, S (2017) Area of linkage between lean construction and sustainability in indian construction industry. International Journal of Civil Engineering and Technology, 8 (8). ISSN 0976-6308

Dixit, S, Mandal, SN, Sawhney, A and Singh, S (2017) Relationship between skill development and productivity in construction sector: A literature review. International Journal of Civil Engineering and Technology, 8 (8). pp. 649-665. ISSN 0976-6308

Dobson, DW, Sourani, A, Sertyesilisik, B and Tunstall, A (2013) Sustainable Construction: Analysis of its Costs and Benefits. American Journal of Civil Engineering and Architecture, 1 (2). pp. 32-38. ISSN 2328-398X

Du, J, Zhang, X and King, D (2018) An investigation into the risk of night light pollution in a glazed office building: The effect of shading solutions. Building and Environment, 145. pp. 243-259. ISSN 0360-1323

Dulaimi, A, Al Busaltan, S, Mydin, MAO, Lu, D, Özkılıç, YO, Jaya, RP and Ameen, A (2023) Innovative geopolymer-based cold asphalt emulsion mixture as eco-friendly material. Scientific Reports, 13 (1). pp. 1-14. ISSN 2045-2322

Dulaimi, A, Al Nageim, H, Ruddock, F and Seton, L (2016) New developments with cold asphalt concrete binder course mixtures containing binary blended cementitious filler (BBCF). Construction and Building Materials, 124. pp. 414-423. ISSN 0950-0618

Dulaimi, AF, Al Nageim, H, Ruddock, F and Seton, L (2017) High performance cold asphalt concrete mixture for binder course using alkali-activated binary blended cementitious filler. Construction and Building Materials, 141. pp. 160-170. ISSN 0950-0618

Dulaimi, AF, Al Nageim, H, Ruddock, F and Seton, L (2017) Laboratory Studies to Examine the Properties of a Novel Cold-Asphalt Concrete Binder Course Mixture Containing Binary Blended Cementitious Filler (BBCF). Journal of Materials in Civil Engineering, 29 (9). ISSN 0899-1561

Dulaimi, AF, Al Nageim, H, Ruddock, F and Seton, L (2017) Performance analysis of a Cold Asphalt Concrete Binder Course Containing High Calcium Fly Ash Utilizing Waste Material. Journal of Materials in Civil Engineering, 29 (7). ISSN 0899-1561

Dulaimi, AF, Al-Busaltan, S, Kadhim, MA, Al-Khafaji, R, Sadique, MM, Al Nageim, H, Ibrahem, RK, Awrejcewicz, J, Pawłowski, W and Mahdi, JM (2022) A Sustainable Cold Mix Asphalt Mixture Comprising Paper Sludge Ash and Cement Kiln Dust. Sustainability, 14 (16).

Durrans, D, Lee, D and Sadique, M (2022) Application of concrete encased ecobrick blocks in the UK’s construction industry. Kufa Journal of Engineering, 13 (4). pp. 70-89. ISSN 2071-5528

Farhan, S, Akef, V, Antón, D, Hashim, KS and Zubaidi, S (2021) Factors influencing the transformation of Iraqi holy cities: the case of Al-Najaf. Przegląd Naukowy Inżynieria i Kształtowanie Środowiska, 30 (2). pp. 365-375. ISSN 1732-9353

Fasna, MFF, Gunatilake, S, Ross, A and Manewa, RMAS (2022) Implementing Energy Retrofits in Existing Hotel Buildings using In-House Teams: The Decision-making Process. Journal of Facilities Management. ISSN 1472-5967

Faustino, P, Brás, A, Gonçalves, F and Nunes, Â (2017) Probabilistic service life of RC structures under carbonation. Magazine of Concrete Research, 69 (6). pp. 280-291. ISSN 0024-9831

Faustino, P, Brás, A and Ripper, T (2013) Corrosion inhibitors' effect on design service life of RC structures. Construction and Building Materials, 53. pp. 360-369. ISSN 0950-0618

Faustino, P, Chastre, C, Nunes, Â and Brás, A (2016) Lifetime modelling of chloride-induced corrosion in concrete structures with Portland and blended cements. Structure and Infrastructure Engineering, 12 (9). pp. 1013-1023. ISSN 1573-2479

Faustino, P, Gonçalves, F, Brás, A and Nunes, Â (2017) Lifetime Prediction of Reinforced Concrete Structures in Carbonation Environments Carbonation Modelling Vs Air Permeability Modelling. Journal of Civil Engineering and Management, 23 (2). pp. 283-291. ISSN 1392-3730

Finnegan, S and Ashall, M (2014) Costing Carbon. RICS Construction Journal.

Finnegan, S and Ashall, M (2014) Gathering Data. RICS Construction Journal.

Finnegan, S and Dowd, T (2014) Stepping up on savings. RICS Construction Journal.

Gand, AK, Yeboah, D, Khorami, M, Olubanwo, AO and Lumor, R (2018) Behaviour of strengthened timber beams using near surface mounted Basalt Fibre Reinforced Polymer (BFRP) rebars. Engineering Solid Mechanics, 6 (4). pp. 341-352. ISSN 2291-8744

Garcia, MD and Amoako-Attah, J (2023) Energy performance analysis and assessment of retrofit renewable energy technology for a university building. Engineering Future Sustainability, 1 (2). ISSN 2753-4693

Georgantzia, E, Ali, SB, Gkantou, M, Kamaris, GS, Kot, P and Hashim, K (2022) Numerical modelling of concrete-filled aluminium alloy 6082-T6 columns under axial compression. Journal of Physics: Conference Series, 2198 (1). 012045-012045. ISSN 1742-6588

Georgantzia, E, Nikolaidis, T, Katakalos, K, Tsikaloudaki, K and Iliadis, T (2022) Dynamic Performance Analysis by Laboratory Tests of a Sustainable Prefabricated Composite Structural Wall System. Energies, 15 (9).

Gkantou, M, Bock, M and Theofanous, M (2021) Design of stainless steel cross-sections with outstand elements under stress gradients. Journal of Constructional Steel Research, 179. ISSN 0143-974X

Gkantou, M, Georgantzia, E, Kadhim, A, Kamaris, GS and Sadique, M (2023) Geopolymer concrete-filled aluminium alloy tubular cross-sections. Structures, 51. pp. 528-543. ISSN 2352-0124

Gkantou, M, Kokosis, G, Theofanous, M and Dirar, S (2018) Plastic design of stainless steel continuous beams. Journal of Constructional Steel Research. ISSN 0143-974X

Gkantou, M, Muradov, M, Kamaris, GS, Hashim, KS, Atherton, W and Kot, P (2019) Novel Electromagnetic Sensors Embedded in Reinforced Concrete Beams for Crack Detection. Sensors, 19 (23). ISSN 1424-8220

Gkantou, M, Theofanous, M, Antoniou, N and Baniotopoulos, C (2017) Compressive behaviour of high-strength steel cross-sections. Proceedings of the Institution of Civil Engineers - Structures and Buildings, 170 (11). pp. 813-824. ISSN 0965-0911

Gkantou, M, Theofanous, M, Wang, J, Baniotopoulos, C and Gardner, L (2017) Behaviour and design of high-strength steel cross-sections under combined loading. Proceedings of the Institution of Civil Engineers - Structures and Buildings, 170 (11). pp. 841-854. ISSN 0965-0911

Gkantou, M, Tziavos, NI, Dirar, S, Theofanous, M, Ukpedor, OP and Foster, A (2024) Assessment of design models for aluminium alloy CHS beam-columns with stocky cross-sections. Structures, 65.

González-Kunz, RN, Pineda, P, Brás, A and Morillas, L (2017) Plant biomass ashes in cement-based building materials. Feasibility as eco-efficient structural mortars and grouts. Sustainable Cities and Society, 31. pp. 151-172. ISSN 2210-6707

Hamad, MA, Nasr, M, Shubbar, AAF, Al-Khafaji, Z, Al Masoodi, Z, Al-Hashimi, O, Kot, P, Al Khaddar, R and Hashim, KS (2021) Production of Ultra-High-Performance Concrete with Low Energy Consumption and Carbon Footprint Using Supplementary Cementitious Materials Instead of Silica Fume: A Review. Energies, 14 (24). ISSN 1996-1073

Hanoon, DS, Sallal, AK, Shubbar, AAF, Al-Khafaji, ZS, Nasr, MS, Al-Mamoori, SF, Al-Fehaida, A, Abdulraheem, MS, Abdulzahra, FR, Alkhayyat, A, Al-Rifaie, A and Hashim, KS (2021) Early age assessment of cement mortar incorporated high volume fly ash. IOP Conference Series: Materials Science and Engineering, 1090 (1). ISSN 1757-8981

Harris, A, Sourani, A and Sertyesilisik, B (2017) Identification of the Critical Success Factors for Maintenance Contracts with Target Cost Contracting. Journal of Modern Project Management, 5 (2). ISSN 2317-3963

Hayes, L, Sourani, A and Begum, S (2016) An Investigation into the Improvement of Tendering Processes and the Level of Competition for PFI Construction Projects. Journal of Modern Project Management, 4 (1). ISSN 2317-3963

Hussein, AO, Ghayyib, RJ, Radi, FM, Jawad, ZF, Nasr, MS and Shubbar, A (2024) Recycling of Eggshell Powder and Wheat Straw Ash as Cement Replacement Materials in Mortar. Civil Engineering Journal, 10 (1). pp. 83-99. ISSN 2676-6957

Imjai, T, Kefyalew, F, Garcia, R, Kim, B, Brás, A and Sukontasukkul, P (2024) Performance of a novel structural insulated panel in tropical climates: Experimental and numerical studies. Construction and Building Materials, 421. ISSN 0950-0618

Iseri, OK and Dursun, O (2022) The Impacts of Early Architectural Design Decisions on Building Performance. International Journal of Digital Innovation in the Built Environment, 11 (2). pp. 1-21. ISSN 2642-2263

Islam, GMS, Sarker, S, Sadique, MM and Shubbar, AAF (2022) Non-Fired Building Blocks Using Industrial Wastes. Journal of Engineering Science, 12 (3). pp. 1-10. ISSN 2075-4914

Islam, GMS, Shubbar, AAF, Sarker, S and Sadique, MM (2022) Ternary combined industrial wastes for non-fired brick. Australian Journal of Structural Engineering. ISSN 1328-7982

Jabbar, DN, Al-Rifaie, A, Hussein, AM, Shubbar, AAF, Nasr, MS and Al-Khafaji, ZS (2021) Shear behaviour of reinforced concrete beams with small web openings. Materials Today: Proceedings. ISSN 2214-7853

Jannat, N, Hussien, A, Abdullah, B and Cotgrave, A (2020) Application of agro and non-agro waste materials for unfired earth blocks construction: A review. Construction and Building Materials, 254. ISSN 0950-0618

Jannat, N, Hussien, A, Abdullah, B and Cotgrave, A (2020) A Comparative Simulation Study of the Thermal Performances of the Building Envelope Wall Materials in the Tropics. Sustainability, 12 (12). ISSN 2071-1050

Jannat, N, Latif Al-Mufti, RA, Hussein, A, Abdullah, B and Cotgrave, A (2021) Influences of Agro-wastes on the Physico-mechanical and Durability Properties of Unfired Clay Blocks. Construction and Building Materials, 318. ISSN 0950-0618

Jannat, N, Latif Al-Mufti, RA, Hussien, A, Abdullah, B and Cotgrave, A (2021) Influence of Sawdust Particle Sizes on the Physico-Mechanical Properties of Unfired Clay Blocks. Design, 5 (3). ISSN 2411-9660

Jannat, N, Latif Al-Mufti, RA, Hussien, A, Abdullah, B and Cotgrave, A (2021) Utilisation of nut shell wastes in Brick, Mortar and Concrete: A review. Construction and Building Materials, 293. ISSN 0950-0618

Jayanetti, JKDDT, Perera, BAKS, Waidyasekara, KGAS and Siriwardena, M (2023) Critical Analysis of Lean Construction Maturity Models: A Systematic Literature Review. Buildings, 13 (6). ISSN 2075-5309

Jayasena, HS, Thurairajah, N, Perera, BAKS and Siriwardena, M (2023) Affordance-led framework of understanding of BIM adoption. Archnet-IJAR - International Journal of Architectural Research. ISSN 2631-6862

Jebur, AAJ, Atherton, W and Al Khaddar, RM (2018) Feasibility of an evolutionary artificial intelligence (AI) scheme for modelling of load settlement response of concrete piles embedded in cohesionless soil. Ships and Offshore Structures. ISSN 1744-5302

Jebur, AAJ, Atherton, W, Al Khaddar, RM and Loffill, E (2017) Nonlinear analysis of single model piles subjected to lateral load in sloping ground. Procedia Engineering, 196. pp. 52-59. ISSN 1877-7058

Jebur, AAJ, Atherton, W, Al Khaddar, RM and Loffill, E (2017) Piles in sandy soil: A numerical study and experimental validation. Procedia Engineering, 196. pp. 60-67. ISSN 1877-7058

Jebur, AAJ, Atherton, W, Alkhaddar, R and Loffill, E (2016) “Simulation of Soil Pile Interaction of Steel Batter Piles Penetrated in Sandy Soil subjected to Pull-out Loads”. International Journal of Civil, Environmental, Structural, Construction and Architectural Engineering, 10 (5). pp. 600-605.

Jemaa, Y, Yeboah, D and Gkantou, M (2024) Flexural performance of glulam timber beams with glued-in BFRP rods connections. Construction and Building Materials, 443. ISSN 0950-0618

Kadhim, A, Sadique, MM, Al-Mufti, R and Hashim, KS (2020) Developing One-Part Alkali-Activated metakaolin/natural pozzolan Binders using Lime Waste as activation Agent. Advances in Cement Research. ISSN 0951-7197

Kadhim, A, Sadique, MM, Al-Mufti, R and Hashim, KS (2020) Long-term performance of novel high-calcium one-part alkali-activated cement developed from thermally activated lime kiln dust. Journal of Building Engineering. ISSN 2352-7102

Kadhum, M, Mahdi, Z, Funfakh, Y, Mohammed, Z, Abdulraheem, M and Gkantou, M (2021) Experimental investigation on the post-fire performance of reactive powder concrete columns. Przegląd Naukowy Inżynieria i Kształtowanie Środowiska, 30 (2). pp. 315-326. ISSN 1732-9353

Kamaruzzaman, SN, Razali, A, Zawawi, EMA, Basir, SA and Riley, ML (2018) Residents' Satisfaction Towards the Indoor Environmental Quality of Re-engineered Affordable Housing Scheme in Malaysia. International Journal of Technology, 9 (3). pp. 501-512. ISSN 2086-9614

Kamperidis, VC, Papavasileiou, GS, Kamaris, GS and Vasdravellis, G (2020) Seismic collapse of self-centering steel MRFs with different column base structural properties. Journal of Constructional Steel Research, 175. ISSN 0143-974X

Keenan, M and Rostami, A (2019) The impact of quality management systems on construction performance in the North West of England. International Journal of Construction Management. ISSN 1562-3599

Kot, P, Shaw, A, Ali, A, Cotgrave, A and Riley, ML (2016) The feasibility of using electromagnetic waves in determining membrane failure through concrete. International Journal of Civil Engineering, 15 (2). pp. 355-362. ISSN 1735-0522

Kovvuri, PRR, Sawhney, A, Ahuja, R and Sreekumar, A (2016) Efficient Project Delivery Using Lean Principles - An Indian Case Study. Journal of The Institution of Engineers (India): Series A, 97 (1). pp. 19-26. ISSN 2250-2149

Latif, E, Ciupala, MA, Newport, DJ, Tucker, SS, Wijeyesekera, DC and Pruteanu, M (2016) Quasi steady state and dynamic hygrothermal performance of fibrous Hemp and Stone Wool insulations: Two innovative laboratory based investigations. Building and Environment, 95. pp. 391-404. ISSN 0360-1323

Latif, E, Ciupala, MA, Tucker, SS, Wijeyesekera, DC and Newport, DJ (2015) Hygrothermal performance of wood-hemp insulation in timber frame wall panels with and without a vapour barrier. Building and Environment, 92. pp. 122-134. ISSN 0360-1323

Latif, E, Tucker, SS, Ciupala, MA, Wijeyesekera, DC and Newport, D (2014) Hygric properties of hemp bio-insulations with differing compositions. CONSTRUCTION AND BUILDING MATERIALS, 66. pp. 702-711. ISSN 0950-0618

Latif Al-Mufti, RA and Fried, AN (2016) Non-destructive evaluation of reclaimed asphalt cement concrete. European Journal of Environmental and Civil Engineering, 6. pp. 770-782. ISSN 1964-8189

Latif Al-Mufti, RAWM and Fried, AN (2016) Pulse velocity assessment of early age creep of concrete. Construction and Building Materials, 121. pp. 622-628. ISSN 0950-0618

Li, H (2024) Reliable Hybridization Approach for Estimation of The Heating Load of Residential Buildings. International Journal of Advanced Computer Science and Applications, 15 (3). pp. 809-818. ISSN 2158-107X

Li, Y, Du, H and Kumaraswamy, SB (2023) Case-based reasoning approach for decision-making in building retrofit: A review. Building and Environment, 248. p. 111030. ISSN 0360-1323

Majdi, HS, Shubbar, AAF, Nasr, MS, Al-Khafaji, ZS, Jafer, H, Abdulredha, M, Al Masoodi, Z, Sadique, MM and Hashim, KS (2020) Experimental data on compressive strength and ultrasonic pulse velocity properties of sustainable mortar made with high content of GGBFS and CKD combinations. Data in Brief. ISSN 2352-3409

Manewa, A, Siriwardena, M, Ross, A and Madanayake, U (2016) Adaptable buildings for sustainable built environment. Built Environment Project and Asset Management, 6 (2). pp. 139-158. ISSN 2044-124X

Markiewicz, J, Lapinski, S, Kot, P, Tobiasz, A, Muradov, M, Nikel, J, Shaw, A and Al-Shamma'a, A (2020) The quality assessment of different geolocalisation methods for a sensor system to monitor structural health of monumental objects. Sensors, 2010. ISSN 1424-8220

Marolt Cebasek, T and Tom, C (2021) FULL FACE TUNNEL EXCAVATION IN SOILS. Proceedings of the 3rd Annual International Research Symposium –2020. pp. 100-168. ISSN 2659-2061

Marshdi, QSR, Hussien, SA, Mareai, BM, Al-Khafaji, ZS and Shubbar, AAF (2021) Applying of No-fines concretes as a porous concrete in different construction application. Periodicals of Engineering and Natural Sciences (PEN), 9 (4). pp. 999-1012. ISSN 2303-4521

Martin, H, Garner, M, Manewa, RMAS and Chadee, A (2024) Validating the relative importance of technology diffusion barriers- Exploring modular construction design-build practices in the UK. International Journal of Construction Education and Research. ISSN 1557-8771

Matrood, MS, Al-Rifaie, A, Zinkaah, OH and Shubbar, AAF (2021) Behaviour of moment resisting reinforced concrete frames subjected to column removal scenario. IOP Conference Series: Materials Science and Engineering, 1090 (1). ISSN 1757-8981

Mittal, Y, Paul, VK, Rostami, A, Riley, ML and Sawhney, A (2020) Delay factors in construction of healthcare infrastructure projects: a comparison amongst developing countries. Asian Journal of Civil Engineering, 21. pp. 649-661. ISSN 1563-0854

Mohammed, H, Giuntini, F, Sadique, MM, Shaw, A and Brás, A (2021) Polymer modified concrete impact on the durability of infrastructure exposed to chloride environments. Construction and Building Materials, 317. ISSN 0950-0618

Mohammed, H, Ortoneda-Pedrola, M, Nakouti, I and Brás, A (2020) Experimental characterisation of non-encapsulated bio-based concrete with self-healing capacity. Construction and Building Materials, 256. ISSN 0950-0618

Mohammed, H, Sadique, MM, Shaw, A and Brás, A (2020) The Influence of Incorporating Plastic within Concrete and the Potential Use of Microwave Curing; A Review. Journal of Building Engineering, 32. ISSN 2352-7102

Morales-Beltran, M, Turan, G, Dursun, O and Nijsse, R (2018) Energy dissipation and performance assessment of double damped outriggers in tall buildings under strong earthquakes. Structural Design of Tall and Special Buildings, 28 (1). ISSN 1541-7794

Mualam, N, Hendricks, A, Maliene, V and Salinger, E (2021) Value Capture and Vertical Allocations of Public Amenities. Sustainability, 13 (7). ISSN 2071-1050

Mulliner, E, Riley, ML and Maliene, V (2020) Older People’s Preferences for Housing and Environment Characteristics. Sustainability, 12 (14). ISSN 2071-1050

Mulliner, EK and Algrnas, M (2018) Preferences for housing attributes in Saudi Arabia: A comparison between consumers’ and property practitioners’ views. Cities, 83. pp. 152-164. ISSN 0264-2751

Mulliner, EK and Kirsten, LK (2017) Preparation for the Energy Act 2011 and minimum energy efficiency standards in UK commercial property. International Journal of Strategic Property Management, 2 (21). pp. 183-198. ISSN 1648-715X

Muradov, M, Kot, P, Markiewicz, J, Łapiński, S, Tobiasz, A, Onisk, K, Shaw, A, Hashim, KS, Zawieska, D and Mohi-Ud-din, G (2022) Non-Destructive System for In-Wall Moisture Assessment of Cultural Heritage Buildings. Measurement, 203. ISSN 0263-2241

Mustafa, S, Hameed, MA and Dulaimi, AF (2022) Evaluation of the properties of modified local asphalt binder by using styrene butadiene rubber (SBR) or low-density polyethylene (LDPE). Scientific Review Engineering and Environmental Studies (SREES), 31 (3). pp. 190-202.

Mydin, MAO, Abdullah, MMAB, Hamah Sor, N, Omar, R, Dulaimi, A, Awoyera, PO, Althoey, F and Deifalla, AF (2023) Thermal conductivity, microstructure and hardened characteristics of foamed concrete composite reinforced with raffia fiber. Journal of Materials Research and Technology, 26. pp. 850-864. ISSN 2238-7854

Mydin, MAO, Jagadesh, P, Bahrami, A, Dulaimi, A, Özkılıç, YO, Abdullah, MMAB and Jaya, RP (2023) Use of calcium carbonate nanoparticles in production of nano-engineered foamed concrete. Journal of Materials Research and Technology, 26. pp. 4405-4422. ISSN 2238-7854

Mydin, MAO, Majeed, SS, Bahrami, A, Dulaimi, A, Özkılıç, YO, Omar, R, Abdullah, MMAB, Palanisamy, J and Awoyera, PO (2024) Study on freshness, morphology, strength, and durability properties of foamed concrete reinforced with agave fiber. Journal of Engineered Fibers and Fabrics, 19.

Najim, FT, Bahlekeh, A, Mohammed, HI, Dulaimi, A, Abed, AM, Ibrahem, RK, Al-Qrimli, FA, Mahmoud, MZ, Awrejcewicz, J and Pawłowski, W (2022) Evaluation of Melting Mechanism and Natural Convection Effect in a Triplex Tube Heat Storage System with a Novel Fin Arrangement. Sustainability, 14 (17). ISSN 2071-1050

Nanyam, VN, Basu, R, Sawhney, A and Prasad, JK (2015) Selection Framework for Evaluating Housing Technologies. Procedia Engineering, 123. pp. 333-341. ISSN 1877-7058

Naser, MH, Falah, MW, Naser, FH, Nasr, MS, Hashim, TM and Shubbar, A (2024) The effect of industrial and waste fibres on concrete strength and structural behaviour of rc short columns. IIUM Engineering Journal, 25 (1). pp. 87-101. ISSN 1511-788X

Nasr, MS, Ali, IM, Hussein, AM, Shubbar, AAF, Kareem, QT and AbdulAmeer, AT (2020) Utilization of locally produced waste in the production of sustainable mortar. Case Studies in Construction Materials, 13. ISSN 2214-5095

Nasr, MS, Hasan, ZA, Abed, MK, Dhahir, MK, Najim, WN, Shubbar, AAF and Habeeb, ZD (2020) Utilization of High Volume Fraction of Binary Combinations of Supplementary Cementitious Materials in the Production of Reactive Powder Concrete. Periodica Polytechnica Civil Engineering. ISSN 0553-6626

Nasr, MS, Shubbar, AAF, Abed, ZA-AR and Ibrahim, MS (2020) Properties of eco-friendly cement mortar contained recycled materials from different sources. Journal of Building Engineering, 31. ISSN 2352-7102

Nesensohn, C, Bryde, DJ, Fearon, DJ and Ochieng, EG (2014) Maturity and maturity models in lean construction. Australasian Journal of Construction Economics and Building, 1 (14). pp. 45-59. ISSN 1835-6354

Nesensohn, C, Bryde, DJ and Pasquire, C (2016) A Measurement Model for Lean Construction Maturity. Lean Construction Journal. pp. 1-9. ISSN 1555-1369

Obaid, HA, Hashim, TM, Al-Abody, AAM, Nasr, MS, Abbas, GH, Kadhim, AM and Sadique, M (2022) Properties of Modified Warm-Mix Asphalt Mixtures Containing Different Percentages of Reclaimed Asphalt Pavement. Energies, 15 (20). ISSN 1996-1073

Obaid, MK, Nasr, MS, Ali, IM, Shubbar, AAF and Hashim, KS (2021) Performance of Green Mortar Made From Locally Available Waste Tiles and Silica Fume. Journal of Engineering Science and Technology, 16 (1). pp. 136-151. ISSN 1823-4690

Ojuri, O and Hyunwook, Y (2021) How does the biophilic design of building projects impact consumers’ responses? – Case of retail stores. Journal of Retailing and Consumer Services, 62, (102637). ISSN 0969-6989

Ojuri, OO, Olowoselu, AS, Akinrele, J, Ayodele, FO and Jayejeje, OO (2024) Sustainable integrated solid waste management for a university campus − A case study of the Federal University of Technology Akure (FUTA), Nigeria. Waste Management Bulletin, 2 (2). pp. 161-170. ISSN 2949-7507

Omer, G, Kot, P, Atherton, W, Muradov, M, Gkantou, M, Shaw, A, Riley, ML, Hashim, KS and Al-Shamma'a, A (2021) A Non-Destructive Electromagnetic Sensing Technique to Determine Chloride Level in Maritime Concrete. Karbala International Journal of Modern Science, 7 (1). pp. 61-71. ISSN 2405-609X

Omoregie, AI, Ong, DEL, Alhassan, M, Basri, HF, Muda, K, Ojuri, OO and Ouahbi, T (2024) Two decades of research trends in microbial-induced carbonate precipitation for heavy metal removal: a bibliometric review and literature review. Environmental Science and Pollution Research. ISSN 0944-1344

Orr, J, Brás, A and Ibell, T (2017) Effectiveness of design codes for life cycle energy optimisation. Energy and Buildings, 140. pp. 61-67. ISSN 0378-7788

Prochorskaite, A, Couch, C, Malys, N and Maliene, V (2016) Housing Stakeholder Preferences for the "Soft" Features of Sustainable and Healthy Housing Design in the UK. International Journal of Environmental Research and Public Health, 13 (1). ISSN 1660-4601

Purumal, K, Ali, AS, Zakaria, N and Baaki, TK (2021) Systematic literature review on green maintenance principles and maintenance performance indicators for green buildings design. Journal of Design and Built Environment, 21 (2). pp. 59-75. ISSN 1823-4208

Qapo, M, Dirar, S and Jemaa, Y (2016) Finite element parametric study of reinforced concrete beams shear-strengthened with embedded FRP bars. Composite Structures, 149. pp. 93-105. ISSN 0263-8223

Rahman, R, Dirar, S, Jemaa, Y, Theofanous, M and Elshafie, M (2018) Experimental Behavior and Design of Exterior Reinforced Concrete Beam-Column Joints Strengthened with Embedded Bars. Journal of Composites for Construction, 22 (6). ISSN 1090-0268

Ram, M, Baltzopoulos, V, Shaw, A, Maganaris, CN, Cullen, J and O'Brien, TD (2024) Stair-Fall Risk Parameters in a Controlled Gait Laboratory Environment and Real (Domestic) Houses: A Prospective Study in Faller and Non-Faller Groups. Sensors, 24 (526). ISSN 1424-8220

Ran, H, Ma, J, Chen, X, Sun, Y, Gkantou, M and McCrum, D (2024) Local Stability of Laser-Welded Stainless-Steel T-Section Stub Columns. Journal of Structural Engineering, 150 (7). ISSN 0733-9445

Ranadewa, KATO, Y.G. Sandanayake, YGS and Siriwardena, M (2021) Enabling lean through human capacity building: an investigation of small and medium contractors. Built Environment Project and Asset Management. ISSN 2044-124X

Rashid, FL, Al-Obaidi, MA, Dulaimi, A, Bernardo, LFA, Eleiwi, MA, Mahood, HB and Hashim, A (2023) A Review of Recent Improvements, Developments, Effects, and Challenges on Using Phase-Change Materials in Concrete for Thermal Energy Storage and Release. Journal of Composites Science, 7 (9).

Rashid, FL, Mohammed, HI, Dulaimi, A, Al-Obaidi, MA, Talebizadehsardari, P, Ahmad, S and Ameen, A (2023) Analysis of heat transfer in various cavity geometries with and without nano-enhanced phase change material: A review. Energy Reports, 10. pp. 3757-3779.

Rhodes, O, Rostami, A, Khodadadyan, A and Dunne, S (2022) Response Strategies of UK Construction Contractors to COVID-19 in the Consideration of New Projects. Buildings, 12 (7). p. 946.

Ridwan, R, Jemaa, Y and Yuniarto, E (2023) Various Methods of Strengthening Reinforced Concrete Beam-Column Joint Subjected Earthquake-Type Loading Using Fibre-Reinforced Polymers: A Critical Review. Journal of Applied Materials and Technology, 4 (2). pp. 42-55. ISSN 2721-446X

Riley, ML, Cotgrave, A and Kokkarinen, N (2015) Prevalence of POE in UK Higher Education Institutions. Structural Survey, 33 (1). pp. 4-14. ISSN 0263-080X

Riley, ML, Kamaruzzaman, S, Razali, A and Marinie Ahmad Zawawi, E (2018) Determining Significant Parameters on Health and Well-Being of Building Occupants Towards Re-Engineered Inclusive Environment. Journal of Building Performance, 9 (1).

Romano, A, Brás, A, Grammatikos, S, Shaw, A and Riley, ML (2019) Dynamic behaviour of bio-based and recycled materials for indoor environmental comfort. Construction and Building Materials, 211. pp. 730-743. ISSN 0950-0618

Sadique, MM, Al-Nageim, H, Atherton, W, Seton, L and Dempster, NM (2019) Analytical investigation of hydration mechanism of a non-Portland binder with waste paper sludge ash. Construction and Building Materials, 211. pp. 80-87. ISSN 0950-0618

Sadique, PM and de Sande, VT (2023) Environmental Benefits of Using Activated Sugarcane Bagasse Ash in Cementitious Materials. Proceedings of 59th Annual Associated Schools of Construction International Conference, 4. pp. 723-731.

Salleh, NM, Kamaruzzaman, SN, Riley, ML, Ahmad Zawawi, EM and Sulaiman, R (2015) A quantitative evaluation of indoor environmental quality in refurbished kindergarten buildings: A Malaysian case study. Building and Environment, 94 (2). pp. 723-733. ISSN 0360-1323

Sawhney, A and Maheswari, JU (2013) Design Coordination Using Cloud-based Smart Building Element Models. International Journal of Computer Information Systems and Industrial Management Applications, 5 (2013). pp. 445-453. ISSN 2150-7988

Sawhney, A, Mukherjee, KK, Rahimian, FP and Goulding, JS (2014) Scenario thinking approach for leveraging ICT to support SMEs in the Indian construction industry. Procedia Engineering, 85. pp. 446-453. ISSN 1877-7058

Sawhney, A and Singhal, P (2013) Drivers and Barriers to the Use of Building Information Modelling in India. International Journal of 3-D Information Modeling, 2 (3). pp. 46-63. ISSN 2156-1710

Shah, MN, Mulliner, E, Singh, TP and K. Ahuja, A (2022) CRITICAL SUCCESS FACTORS FOR AFFORDABLE HOUSING: EVIDENCE FROM LOWER-MIDDLE INCOME AND HIGH INCOME ECONOMIES. Journal of Surveying, Construction and Property (JSCP), 13 (1). pp. 1-19. ISSN 1985-7527

Shah, RK (2016) An Exploration Of Causes For Delay And Cost Overrun In Construction Projects: A Case Study Of Australia, Malaysia & Ghana. Journal of Advanced College of Engineering and Management, 2 (1). pp. 41-55. ISSN 2392-4853

Shah, RK, Al Shereiqi, K and Borthwick, F (2021) A Study of Challenges and Benefits of Lean Construction (LC) Principles in Omani Construction Industry. Journal of Construction Research, 2 (2). pp. 16-29. ISSN 2630-5089

Shah, RK and Alotaibi, M (2018) A study of unethical practices in the construction industry and potential preventive measures. Journal of Advanced College of Engineering and Management, 3. pp. 55-77. ISSN 2392-4853

Shah, RK, Dawood, N and Castro, S (2008) Automatic generation of progress profiles for eathwork operations using 4D visualisation model. Electronic Journal of Information Technology in Construction, 13. pp. 491-456. ISSN 1874-4753

Shah, RK and Edwards, J (2016) Investigation of health and safety impact from the ‘Site BIM’ tools in the live construction sites. Journal of Construction Engineering and Project Management, 6 (2). pp. 1-7. ISSN 2233-9582

Shah, RK, Shebob, A and Mhalas, A (2013) A Review of Customer Satisfaction Factors in Libyan Housing Projects. Journal of Construction Engineering and Project Management, 3 (4). pp. 26-34.

Shahrokhi, A, Berthaut-Gerentes, J, Ma, L, Ingham, D and Pourkashanian, M (2023) Large Eddy Simulation Inflow Generation Using Reduced Length Scales for Flows Past Low-Rise Buildings. Sustainability, 15 (17). p. 12786. ISSN 2071-1050

Shanbara, HK, Ruddock, F and Atherton, W (2018) Predicting the rutting behaviour of natural fibre-reinforced cold mix asphalt using the finite element method. Construction and Building Materials, 167. pp. 907-917. ISSN 0950-0618

Shanbara, HK, Ruddock, F and Atherton, W (2018) A viscoplastic model for permanent deformation prediction of reinforced cold mix asphalt. Construction and Building Materials, 186. pp. 287-302. ISSN 0950-0618

Shelote, KM, Gavali, HR, Brás, A and Ralegaonkar, RV (2021) Utilization of Co-Fired Blended Ash and Chopped Basalt Fiber in the Development of Sustainable Mortar. Sustainability, 13 (3). ISSN 2071-1050

Shubbar, AAF, Jafer, H, Abdulredha, M, Al-Khafaji, ZS, Nasr, MS, Al Masoodi, Z and Sadique, MM (2020) Properties of cement mortar incorporated high volume fraction of GGBFS and CKD from 1 day to 550 days. Journal of Building Engineering, 30. ISSN 2352-7102

Singh, MM, Sawhney, A and Borrmann, A (2017) Integrating rules of modular coordination to improve model authoring in BIM. International Journal of Construction Management. pp. 1-17. ISSN 1562-3599

Singh, MM, Sawhney, A and Borrmann, A (2015) Modular Coordination and BIM: Development of Rule Based Smart Building Components. Procedia Engineering, 123. pp. 519-527. ISSN 1877-7058

Singh, MM, Sawhney, A and Sharma, V (2017) Utilising Building Component Data from BIM for Formwork Planning. Construction Economics and Building, 17 (4). ISSN 2204-9029

Strohle, M, Sadique, MM, Dulaimi, AF and Kadhim, MA (2022) Prospect and barrier of 3D concrete: a systematic review. Innovative Infrastructure Solutions, 8 (1). ISSN 2364-4176

Suziedelyte-Visockiene, J, Bagdziunaite, R, Malys, N and Maliene, V (2015) CLOSE-RANGE PHOTOGRAMMETRY ENABLES DOCUMENTATION OF ENVIRONMENT-INDUCED DEFORMATION OF ARCHITECTURAL HERITAGE. ENVIRONMENTAL ENGINEERING AND MANAGEMENT JOURNAL, 14 (6). pp. 1371-1381. ISSN 1582-9596

Teng, KH, Kot, P, Muradov, M, Shaw, A, Hashim, KS, Gkantou, M and Al-Shamma'a, A (2019) Embedded Smart Antenna for Nondestructive Testing and Evaluation (NDT&E) of Moisture Content and Deterioration in Concrete. Sensors, 19 (3). ISSN 1424-8220

Thomas, N, Skervin, T, Foster, RJ, O'Brien, TD, Carpenter, M, Maganaris, CN, Baltzopoulos, V, Lees, C and Hollands, MA (2020) Optimal lighting levels for stair safety: influence of lightbulb type and brightness on confidence, dynamic balance and stepping characteristics. Experimental Gerontology. ISSN 0531-5565

Torres de Sande, V, Sadique, M, Brás, A and Pineda, P (2022) Activated sugarcane bagasse ash as efficient admixture in cement-based mortars: Mechanical and durability improvements. Journal of Building Engineering, 59. ISSN 2352-7102

Torres de Sande, V, Sadique, MM, Pineda, P, Brás, A, Atherton, W and Riley, ML (2021) Potential use of sugar cane bagasse ash as sand replacement for durable concrete. Journal of Building Engineering. ISSN 2352-7102

Tucker, MP and Ashworth, S (2017) Introduction of employer information requirements (EIR ) template and guidance for Facility Management. eFMinsight (40). pp. 51-53.

Tucker, MP and Masuri, MR (2016) The Rationale to Integrate Facilities Management Into the Development Process. Property Management, 34 (4). pp. 332-344. ISSN 1758-731X

Tucker, SS and Bleil De Souza, C (2015) Thermal simulation outputs: exploring the concept of patterns in design decision-making. Journal of Building Performance Simulation. ISSN 1940-1507

Tumelienė, E, Visockienė, JS and Maliene, V (2021) The Influence of Seasonality on the Multi-Spectral Image Segmentation for Identification of Abandoned Land. Sustainability, 13 (12). ISSN 2071-1050

Tziavos, NI, Gkantou, M, Theofanous, M, Dirar, S and Baniotopoulos, C (2020) Behaviour of grout-filled double-skin tubular steel stub-columns: Numerical modelling and design considerations. Structures, 27. pp. 1623-1636. ISSN 2352-0124

Tzimas, AS, Kamaris, GS, Karavasilis, TL and Galasso, C (2016) Collapse risk and residual drift performance of steel buildings using post-tensioned MRFs and viscous dampers in near-fault regions. Bulletin of Earthquake Engineering, 14 (6). pp. 1643-1662. ISSN 1570-761X

Umar, T and Umeokafor, N (2022) Developing a Safety Climate Assessment Tool for Omani Construction Industry. International Journal of Service Science, Management, Engineering, and Technology, 13 (1). pp. 1-24. ISSN 1947-959X

Umeokafor, N, Umar, T and Evangelinos, K (2022) Bibliometric and scientometric analysis-based review of construction safety and health research in developing countries from 1990 to 2021. Safety Science, 156. ISSN 0925-7535

Umeokafor, N and Windapo, A (2019) The influence of religious consciousness on construction health and safety practices and performance. Journal of Construction in Developing Countries, 24 (1). pp. 23-47. ISSN 1823-6499

Umeokafor, N, Windapo, A, Manu, P, Diugwu, I and Haroglu, H (2022) Critical Barriers to Prevention through Design in Construction in Nigeria: A Qualitative Inquiry. Engineering, Construction and Architectural Management. ISSN 0969-9988

Van Der Bergh, JM, Miljević, B, Vučetić, S, Šovljanski, O, Markov, S, Riley, ML, Ranogajec, J and Brás, A (2021) Comparison of Microbially Induced Healing Solutions for Crack Repairs of Cement-Based Infrastructure. SUSTAINABILITY, 13 (8).

Van Der Bergh, JM, Miljević, B, Šovljanski, O, Vučetić, S, Markov, S, Ranogajec, J and Armada Bras, AM (2020) Preliminary approach to bio-based surface healing of structural repair cement mortars. Construction and Building Materials, 248. ISSN 0950-0618

Vejchodská, E, Barreira, AP, Auziņš, A, Jürgenson, E, Fowles, S and Maliene, V (2022) Bridging land value capture with land rent narratives. Land Use Policy, 114. ISSN 0264-8377

Wang, J, Afshan, S, Gkantou, M, Theofanous, M, Baniotopoulos, C and Gardner, L (2016) Flexural behaviour of hot-finished high strength steel square and rectangular hollow sections. Journal of Constructional Steel Research, 121. pp. 97-109. ISSN 0143-974X

Wang, Y, Kuckelkorn, J, Li, D and Du, J (2018) Evaluation on distributed renewable energy system integrated with a Passive House building using a new energy performance index. Energy, 161. pp. 81-89. ISSN 0360-5442

Wang, Y, Kuckelkorn, JM, Li, D and Du, J (2018) A novel coupling control with decision-maker and PID controller for minimizing heating energy consumption and ensuring indoor environmental quality. Journal of Building Physics. ISSN 1744-2591

Wang, YC, Lai, HW and Ren, XJ (2019) Enhanced Auxetic and Viscoelastic Properties of Filled Reentrant Honeycomb. Physica Status Solidi (B) Basic Research. ISSN 0370-1972

Wijekoon, KA, Manewa, RMAS and Ross, AD (2018) Enhancing the value of Facilities Information Management (FIM) through BIM integration. Engineering, Construction and Architectural Management. ISSN 0969-9988

Wilson, HK and Cotgrave, AJ (2016) Factors that influence students' satisfaction with their physical learning environments. Structural Survey, 34 (3). pp. 256-275. ISSN 0263-080X

Xu, S, Li, G, Zhang, H, Xie, M, Mendis, T and Du, H (2023) Effect of Block Morphology on Building Energy Consumption of Office Blocks: A Case of Wuhan, China. Buildings, 13 (3). ISSN 2075-5309

Yeboah, D and Gkantou, M (2021) Investigation of flexural behaviour of structural timber beams strengthened with NSM basalt and glass FRP bars. Structures, 33. pp. 390-409. ISSN 2352-0124

Yumba, J, Ferentinou, M and Grobler, M (2024) Experimental Study of Sinkhole Propagation Induced by a Leaking Pipe Using Fibre Bragg Grating Sensors. Sensors, 24 (19).

Zhao, Y, Du, HB and Guo, FB (2019) Consideration of Human Factors in a Design of Fire-rescue Window. Art Work (No.19,). ISSN 2096-076X

Zhour, F, Abdellatif, M, Osman, Y and Lee, D (2023) Comparison between the life cycle carbon footprint of refurbished and new buildings: A case study of Community centre. Journal of Building Design and Environment, 2 (1). ISSN 2811-0730

Zhour, F, Lee, D, Abdellatif, M, Waseem Ahmad, M and Blackburn, C (2024) Improving the Energy Efficiency of the Modular Buildings Drying Room: A Case Study of Construction Site Cabins. Applied Sciences, 14 (21).

Book Section

Umeokafor, N and Umar, T (2023) Barriers to Big Data Techniques Application in Construction Safety, Health and Wellbeing. In: Handbook of Construction Safety, Health and Well-being in the Industry 4.0 Era. Taylor & Francis. ISBN 9781032079929

Conference or Workshop Item

Abdellatif, M, Osman, Y and Al Khaddar, RM (2020) Towards a Low Carbon Design: A case study of an Industrial Building. In: INTERNATIONAL ARCHITECTURE AND ART CONGRESS, 2020 . (3rd International Congress on Architecture and Design, 18 April 2020 - 19 April 2020, Istanbul Turkey).

Abdulredha, M, Muhsin, AA, Al-Janabi, A, Alajm, BN, Gkantou, M, Amoako-Attah, J, Al-Jumeily, D, Mustafina, J and AlKhayyat, A (2021) Using SF and CKD as cement replacement materials for producing cement mortar. In: IOP Conference Series: Materials Science and Engineering , 1058 (1). 012007-012007. (1st Conference on Science and Technology for Early Career Researchers and Postgraduate Students (STEPS 2020), 20-22 December 2020, Erbil, Iraq).

Ahuja, R, Sawhney, A and Arif, M (2017) Prioritizing BIM Capabilities of an Organization: An Interpretive Structural Modeling Analysis. In: Procedia Engineering , 196. pp. 2-10. (Creative Construction Conference 2017, 19 June 2017 - 22 June 2017, Primosten, Croatia).

Alenezi, A, Hasan, H, Hashim, KS, Amoako-Attah, J, Gkantou, M, Muradov, M, Kot, P and Abdulhadi, B (2020) Zeolite-assisted electrocoagulation for remediation of phosphate from calcium-phosphate solution. In: IOP Conference Series: Materials Science and Engineering (888). (2nd International Conference on Civil and Environmental Engineering Technologies (ICCEET 2020), 10 June 2020 - 11 June 2020, Najaf, Iraq).

Basu, R, Nanyam, VPSN and Sawhney, A (2017) A Multi-dimensional Subcontractor Evaluation Framework for Nonconventional Housing Systems. In: Procedia Engineering , 196. pp. 253-261. (Creative Construction Conference 2017, CCC 2017, 19 June 2017 - 22 June 2017, Primosten, Croatia).

Benabbou, R, Hui, Y, Roberts, EE and Shao, JJ (2022) Reinventing the Image of Cities Using the Element of Water International Case Studies of Waterfront Urban Developments. In: WIT Transactions on Ecology and the Environment , 13 (260). pp. 365-377. (SUSTAINABLE CITY 2022, Rome, Italy).

Bleil De Souza, C and Tucker, SS (2013) Thermal simulation software outputs: what do building designers propose? In: Proceedings of BS 2013: 13th Conference of the International Building Performance Simulation Association . pp. 468-475. (Building Simulation 2013 (BS2013): 13th International Conference of the International Building Performance Simulation Association, 26th-28th August 2013, Chambery, France).

Brady, LJ, King, D, Eaton, K and Shaw, T (2013) Is Steam a Modern Heating Medium or a Victorian Hangover? In: CIBSE Web Site . (CIBSE Technical Symposium 2013, 11th - 12th April 2013, Liverpool John Moores University, Liverpool).

Brady, LJ and Lowe, J (2014) Engineering Defects – Costs and Sustainability. In: CIBSE website . (CIBSE ASHRAE Technical Symposium, 2014, 3rd - 4th April 2014, Dublin, Ireland).

Chandrasekar, R, Gkantou, M, Nikitas, G, Hashim, KS, Pradeep, HR and Ahuja, A (2022) Integration of 3D Concrete Printing in the Construction Industry: A Short Review. In: Current Trends in Geotechnical Engineering and Construction . pp. 445-452. (International Conference on Geotechnical Engineering, Baghdad, Iraq).

Du, J, Zhang, X and Sharples, S (2017) Air Pollution and Daylight Availability in Urban Areas: Dynamic Simulation in an Office. In: Proceeding of the 15th International Conference of IBPSA (International Building Performance Simulation Association) . pp. 437-444. (The 15th International Conference of IBPSA (International Building Performance Simulation Association), 07 August 2017 - 09 August 2017, San Francisco).

Dursun, O, Durmuslar, F and Olmez, D The Influence of Immediate Urban Surroundings on Energy Performance of Historical Buildings. In: 56th Annual Associated Schools of Construction International Conference, 01 October 2020 - 03 October 2020, Liverpool John Moores University (Postponed). (Accepted)

Finnegan, S (2013) Life Cycle Assessment (LCA) and its role in improving decision making for sustainable development. In: Engineering Education for Sustainable Development, 22 September 2014 - 25 September 2014, University of Cambridge.

Gkantou, M, Martinez-Vazquez, P and Baniotopoulos, C (2017) On the structural response of a tall hybrid onshore wind turbine tower. In: Procedia Engineering , 199. pp. 3200-3205. (10th International Conference on Structural Dynamics (EURODYN), 10 September 2017 - 13 September 2017, Sapienza Univ Rome, Fac Civil & Ind Engn, Rome, ITALY).

Guruge, K, Waidyasekara, KGAS, Jayasena, HS and Manewa, RMAS (2024) Unveiling the potential of design for deconstruction in the circular economy. In: Proceedings of the 12th World Construction Symposium . pp. 1101-1111. (World Construction Symposium - 2024, 9th Aug - 10th Aug 2024, Taj Samudra, Colombo, Sri Lanka).

Hartwell, J, Tucker, MP and Siriwardena, M (2018) Green buildings and well-being of employees in commercial spaces. In: Proceedings of The 7th World Construction Symposium 2018 . pp. 257-265. (7th World Construction Symposium: Built Asset Sustainability: Rethinking Design, Construction and Operations, 29 June 2018 - 01 July 2018, Colombo, Sri Lanka).

Jebur, AAJ, Atherton, W, Loffill, E and Alkhaddar, R (2016) “Analysis of The Lateral Response of A Reinforced Concrete Pile Penetrated In Sand Soil Using Finite Element”. In: International Conference for Doctoral Research, 14 May 2016 - 15 May 2016, British University in Dubai. (Unpublished)

Jebur, AAJ, Atherton, W, Loffill, E and Alkhaddar, R (2016) DEEP FOUNDATIONS: ANALYSIS OF THE LATERAL RESPONSE OF CLOSED ENDED STEEL TUBULAR PILES EMBEDDED IN SANDY SOIL USING p-y CURVES. In: 15th Asphalt, Pavement Engineering and Infrastructure Conference, 24 February 2016 - 25 February 2016, LJMU. (Unpublished)

Jiao, L, Qu, J and Ge, X (2020) Research on Art Intervention in Rural Cultural Construction. In: Web of Proceedings . (2020 8th International Education, Economics, Social Science, Arts, Sports and Management Engineering Conference, 30 October 2020 - 31 October 2020, Chengdu, China).

Kayleigh, E, Abdellatif, M, Amoako-Attah, J, AlQuzweeni, S and Hashim, KS (2021) Mitigating the impact of climate change on UK buildings through zero energy strategies. In: IOP Conference Series : Earth and Environmental Science , 877. (The 7th International Conference on Renewable Energy and Materials Technology (ICOREMT 2021), 1st-2nd September 2021, Erbil, Iraq).

Manewa, R, Anagal, V and Siriwardena, ML (2023) Industry Academia Co-operation for Sustainable Built Environment Ecosystem. In: Going Global Partnerships programmes in Higher Education conference’, 18 September 23, New Delhi, India.

Manewa, R, Satins, M and Siriwardena, M (2023) Causes of Cost Overruns due to Outsourced Labour – Subcontractor’s Perspectives. In: ASC Proceedings 2023 . pp. 707-715. (59th Annual Associated Schools of Construction International Conference, Liverpool, UK).

Manewa, RMAS, Pasquire, CL, Gibb, AG and Schmidt-III, R (2009) Paradigm shift towards whole life analysis in adaptable buildings. In: Changing Roles: New Roles; New Challenges, 5-9 October 2009, Noordwijk aan Zee.

Manewa, RMAS, Rameezdeen, R, Amaratunga, RDG and Ginige, KN (2007) Towards the sustainable construction through minimizing site waste in Sri Lanka. In: Proceedings of 7th International Postgraduate Conference in the Built and Human Environment . (7th International Postgraduate Conference in the Built and Human Environment, 28th - 29th March 2007, Salford, UK).

Manewa, RMAS, Siriwardena, M and Wijekoon, KA (2021) Life Cycle Costing in Construction: Current Trends and Emerging Directions. In: 9th World Construction Symposium . pp. 403-412. (The 9th World Construction Symposium, 9-10th July 2021, Sri Lanka - Online).

Markiewicz, J, Gorecka, K, Zawieska, D, Zielinski, M, Lapinski, S and Kot, P (2022) The Integration of the Multi-Temporal Conservation Works and Non-Invasive Measurements. In: The International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences . pp. 343-349. (9th Intl. Workshop 3D-ARCH “3D Virtual Reconstruction and Visualization of Complex Architectures, 02 March 2022 - 04 March 2022, Mantova, Italy).

Markiewicz, J, Lapinski, S, Bochenska, A and Kot, P (2021) The Reliability Assessment of the TLS Registration Methods - The Case Study of the Royal Castle in Warsaw. In: International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives . ("Imaging today – foreseeing tomorrow", XXIVth ISPRS Congress, 05 July 2021 - 09 July 2021, Nice).

Markiewicz, J, Tobiasz, A, Kot, P, Muradov, M, Shaw, A and Al-Shamma'a, A (2019) Review of Surveying Devices for Structural Health Monitoring of Cultural Heritage Buildings. In: 2019 12th International Conference on Developments in eSystems Engineering (DeSE) . (12th International Conference on the Developments in eSystems Engineering (DESE2019), 07 October 2019 - 10 October 2019, Kazan, Russia).

Martinez-Vazquez, P, Gkantou, M and Baniotopoulos, C (2017) Strength demands of tall wind turbines subject to earthquakes and wind load. In: Procedia Engineering , 199. pp. 3212-3217. (10th International Conference on Structural Dynamics (EURODYN), 10 September 2017 - 13 September 2017, Sapienza Univ Rome, Fac Civil & Ind Engn, Rome, ITALY).

Matipa, WM, Cunnigham, P and Naik, B (2010) Assessing the impact of new rules of cost planning on BIM schema pertinent to quantity surveying practice. In: Proceedings 26th Annual ARCOM Conference , 1. pp. 625-632. (26th Annual Conference, September 6th – 8th, 2010, Association of Researchers in Construction Management, (ARCOM), 06 September 2010 - 08 September 2010, Leeds, UK).

Matipa, WM, Mutale, K, Hanjewele, C and Lungu, A (2011) Examining the “True Cost” of Public Private Partnership Projects to the Public: A Challenge for the African Surveying Profession. In: Proceedings of the Association of African Quantity Surveyors Annual Conference . (Association of African Quantity Surveyors Annual Conference, 14 April 2011 - 15 April 2011, Livingstone, Zambia).

Mulliner, E, Khumpaisal, S and Chen, Z (2012) Applying the Analytical Risk Assessment Method for an Urban Regeneration Project. In: Proceedings of Built Environment Research Associates Conference . (Built Environment Research Associates Conference, BERAC 3, 25 May 2012 - 25 May 2012, Thailand).

Mulliner, E and Maliene, V (2011) CRITERIA FOR SUSTAINABLE HOUSING AFFORDABILITY. In: 8th International Conference on Environmental Engineering, 19th-20th May 2011, Lithuania.

Nanyam, VPSN, Basu, R, Sawhney, A, Vikram, H and Lodha, G (2017) Implementation of Precast Technology in India–Opportunities and Challenges. In: Procedia Engineering , 196. pp. 144-151. (Creative Construction Conference 2017, 19 June 2017 - 22 June 2017, Primosten, Croatia).

Nanyam, VPSN, Sawhney, A and Gupta, PA (2017) Evaluating Offsite Technologies for Affordable Housing. In: Procedia Engineering , 196. pp. 135-143. (Creative Construction Conference 2017, 19 June 2017 - 22 June 2017, Primosten, Croatia).

Ojuri, O, Mills, G and Seidu, RD (2021) How can value co-creation create social value as management practice for sustainable water supply projects? In: Proceedings of IDoBE . (Proceedings of Centre for the Integrated Delivery of the Built Environment (IDoBE) on Uncertainties in the Built Environment: How can we build a resilient future in the new normal? LSBU, London. UK 21 - 23 Nov 2021, 21 November 2021 - 23 November 2021, LSBU, London. UK 21 - 23 Nov 2021).

Seidu, RD, Ayinla, K, Ojuri, O, Young, B and Momoh, J (2021) Cost Effectiveness of Implementing External Facades System. In: Proceedings of IDoBE . (Proceedings of Centre for the Integrated Delivery of the Built Environment (IDoBE) on Uncertainties in the Built Environment: How can we build a resilient future in the new normal?, 21 November 2021 - 23 November 2021, LSBU, London. UK 21 - 23 Nov 2021).

Shah, RK and Dawood, N (2013) Automatic generation and visualisation of location-based scheduling. In: Proceedings of the 13th International Conference on Construction Applications of Virtual Reality . (Proceedings of the 13th International Conference on Construction Applications of Virtual Reality, 30th -31st October 2013, London, UK).

Shah, RK and Dawood, N (2008) Improving Communication of Scheduling Information of Earthworks using 4D Visualisation Model in Road Projects. In: Proceedings of CIB 25th W78 . (CIB W78 2008 International Conference on Information Technology in Construction, 15th - 17th Jul 2008, Santiago, Chile).

Shah, RK, Dawood, N, Dean, J and Castro, S (2009) A Virtual Construction Model of 4D planning in Road Project. In: Proceedings 25th Annual ARCOM Conference , 2. pp. 1091-100. (Annual ARCOM Conference, 7th - 9th Sep 2009, Nottingham, UK).

Shah, RK and Edwards, J (2016) A study of ‘Site BIM’ impact on health and safety in construction sites. In: Proceedings of the 16th International Conference on Construction Applications of Virtual Reality . pp. 306-317. (16th International Conference on Construction Application of Virtual Reality (CONVR),, 12 December 2016 - 13 November 2016, Hong Kong).

Sharma, S, Sawhney, A and Arif, M (2017) Parametric Modelling for Designing Offsite Construction. In: Procedia Engineering , 196. pp. 1114-1121. (Creative Construction Conference 2017, 19 June 2017 - 22 June 2017, Primosten, Croatia).

Shubbar, AAF, Atherton, W, Jafer, HM, Dulaimi, AF and AL-Faluji, D (2017) The Development of a New Cementitious Material Produced from Cement and GGBS. In: The 3rd BUiD Doctoral Research Conference - Faculty of engineering and IT . pp. 51-63. (The 3rd BUiD Doctoral Research Conference, the British University in Dubai, 13 May 2017 - 13 May 2017, Dubai, UAE).

Sindhu, AJ and Gidado, K (2014) Facilities Management: Physical Built Environmental Factors that Influence User Performance in an Office Building. In: EPPM 2014 Conference Papers , 1 (1). (2014 (5th) International Conference on Engineering, Project and Production Management, 26th-28th November 2014, Port Elizabeth, South Africa).

Smith, CR (2017) ‘“Yet Another Apartment Block…?!” A Critique of Housing Provision in Cities, and Qualities That Make Urban Houses Desirable.’. In: AMPS Conference Publication Series 8. Government and Housing in a Time of Crisis: Policy, Planning, Design and Delivery. , 8. (Government and Housing in a Time of Crisis: Policy, Planning, Design and Delivery, 08 September 2016 - 09 September 2016, Liverpool John Moores University).

Smith, H, Amoako-Attah, J, Hashim, R and Hashim, KS (2021) The Success of the Construction Industry's Adoption of the Carbon Assessment Strategy PAS2050. In: IOP Conference Series : Earth and Environmental Science , 877. (The 7th International Conference on Renewable Energy and Materials Technology (ICOREMT 2021), 1st-2nd September 2021, Erbil, Iraq).

Tucker, MP and Roper, K (2015) Synergy of FM competences. In: EuroFM Research Papers 2015 (1.3). (14th EuroFM Research Symposium, 01 June 2015 - 03 June 2015, Glasgow, UK).

Tucker, SS (2007) Integrating energy efficiency into building design using a simplified thermal assessment method. In: 2nd Proceedings of the Advances in Computing and Technology . pp. 233-237. (AC&T - Advances in Computing and Technology, 2nd Annual Conference, 23rd January 2007, University of East London, London, UK).

Tucker, SS and Bleil De Souza, C (2013) Thermal simulation software outputs: patterns for decision making. In: Proceedings of BS2013 . pp. 394-401. (Building Simulation 2013 (BS2013): 13th International Conference of the International Building Performance Simulation Association, 26th-28th August 2013, Chambery, France).

Tucker, SS and Bleil de Souza, C (2021) Design Patterns for Low-Carbon Buildings: A Proposal. In: Smart Innovation, Systems and Technologies , 263. (Sustainability in Energy and Buildings 2021, 16 September 2021 - 17 September 2021, Split, Croatia & Virtual).

Tucker, SS and Spittle, B (2013) Exploring the Whole Life Carbon Benefits of Insulation Materials in Housing Refurbishment. In: Integrated Approaches to Sustainable Building: developing theory and practice through international collaboration and learning . (SB13@Coventry: Sustainable Building & Construction Conference, 03 July 2013 - 05 July 2013, Coventry University, Coventry, UK).

Umar, T and Umeokafor, N (2021) A review of the costs of accidents in GCC construction. In: Proceedings of the Joint CIB W099 & W123 Annual International Conference 2021: Good health, Changes & innovations for improved wellbeing in construction . pp. 274-282. (Joint CIB WO99 & W123 Annual International Conference 2021, 09 September 2021 - 10 September 2021, Glasgow).

Umar, T, Umeokafor, N, Vali, MSH and Zia, A (2022) A Comparative Study of Occupational Safety and Health (OS&H) Regulations in United States, United Kingdom, Australia, South Africa, and Oman. In: IOP Conference Series: Earth and Environmental Science , 1101. (22nd CIB World Building Congress, 27th June to 30th June 2022, Australia).

Unterhitzenberger, C (2016) Organisational Justice and Construction Project Performance. In: British University in Dubai Doctoral Research Conference, 14 May 2016 - 14 May 2016, Dubai. (Unpublished)

Unterhitzenberger, C, Bryde, DJ and Fearon, DJ Organisational Justice and Construction Project Performance. In: Annual Conference of the European Operations Management Association (EurOMA), 17th - 22nd June 2016, Trondheim, Norway. (Unpublished)

WIJEKOON, C, Manewa, RMAS, Ross, A and DAVIES, C (2016) EVALUATING THE ABILITY OF BIM TO ENHANCE VALUE IN FACILITIES INFORMATION MANAGEMENT. In: Proceedings 32nd Annual ARCOM Conference . pp. 1225-1234. (ARCOM 32nd Annual Conference, 05-07th September 2016, Manchester, UK).

Wijekoon, KA, Manewa, A, Ross, A and Marsh, D (2016) Towards facilities information management through BIM. In: Symposium Proceedings - 2016 . (5th World Construction Symposium 2016, 29 July 2016 - 31 July 2016, Colombo, Sri Lanka).

Zhang, X, Du, J and Sharples, S (2017) Ground Factors and Lighting Design in an Urban Area: Daylighting and Light Pollution. In: Proceeding of the 15th International Conference of IBPSA (International Building Performance Simulation Association) . pp. 793-801. (The 15th International Conference of IBPSA (International Building Performance Simulation Association), 07 August 2017 - 09 August 2017, San Francisco).

Thesis

Abbas, A M (2010) Stiffness and deformation properties of asphalt open graded friction course containing cement coated natural aggregates. Doctoral thesis, Liverpool John Moores University.

Al Hakim, B (1997) An improved backcalculation method to predict flexible pavement layers moduli and bonding condition between wearing course and base course. Doctoral thesis, Liverpool John Moores University.

Alblooshi, M (2021) Exploring the Influence of Management Style on Job Satisfaction: The Case of Construction Companies in Abu Dhabi, the United Arab Emirates (UAE). Doctoral thesis, Liverpool John Moores University.

Ali, SB (2023) STRUCTURAL BEHAVIOUR AND DESIGN OF ALUMINIUM ALLOY-CONCRETE COMPOSITE STRUCTURAL MEMBERS. Doctoral thesis, Liverpool John Moores University.

Ashworth, S (2021) The evolution of facility management (FM) in the building information modelling (BIM) process: An opportunity to use critical success factors (CSF) for optimising built assets. Doctoral thesis, Liverpool John Moores University.

Banyte, J (2020) A Framework Development to Facilitate the Effective Management of a Sustainable Commercial Property Market. Doctoral thesis, Liverpool John Moores University.

Barrett, J R (2000) Sustainability and the ecological footprint : comparing human demand with nature's supply. Doctoral thesis, Liverpool John Moores University.

Blay-Armah, Augustine (2014) A CONCEPTUAL FRAMEWORK FOR PROJECT’S TEMPORARY RELATIONSHIPS BETWEEN CONSTRUCTION ORGANISATIONS. Masters thesis, Liverpool John Moores University.

Brady, L (2019) An Investigation into the Management of Energy Performance for Building Services Systems: Design to Operation. Doctoral thesis, Liverpool John Moores University.

Brennan, MCE (2015) Sustainable Construction in the 21st Century: An Educational Perspective to Shifting the Paradigm. Doctoral thesis, Liverpool John Moores University.

Byrne, R (2019) An evaluative framework for the appraisal of the planning role in smart cities. Masters thesis, Liverpool John Moores University.

Connolly, J (2019) Coping with Carbon Monoxide (CO) exposure: An Interpretative Phenomenological Analysis. Doctoral thesis, Liverpool John Moores University.

Dakhil, A (2013) The contribution of the construction industry to economic development in Libya. Doctoral thesis, Liverpool John Moores University.

Demir, Selim Tugra (2013) “AgiLean PM” – A UNIFIYING STRATEGIC FRAMEWORK TO MANAGE CONSTRUCTION PROJECTS. Doctoral thesis, Liverpool John Moores University.

Dmochowski, AA (2016) Examining the Impacts of a New Regional Inner-City Retail Development on Liverpool’s Existing Inner-City Shopping Centres and Other Retail Areas. Doctoral thesis, Liverpool John Moores University.

EDIRISINGHE, VRD (2023) Framework for improved alternatives dispute resolution practice in the Sri Lankan constructions industry. Doctoral thesis, Liverpool John Moores University.

Hall, M A (1999) International construction management : the cultural dimension. Doctoral thesis, Liverpool John Moores University.

Hughes, W (1989) Organizational analysis of building projects. Doctoral thesis, Liverpool John Moores University.

Hussien, A (2017) ARGILE: A Conceptual Framework Combining Augmented Reality with Agile Philosophy for the UK Construction Industry. Doctoral thesis, Liverpool John Moores University.

Ibrahim, I (2015) Corporate Environmental Disclosure:A Case from the Libyan Construction Industry. Doctoral thesis, Liverpool John Moores University.

Jannat, N (2023) Development of agro-wastes based unfired earth blocks to improve indoor thermal comfort in tropics. Doctoral thesis, Liverpool John Moores University.

King, DC (2017) The Engineering Council’s influence on Building Services Engineering education and qualifications: towards an internationalist education and training model. Doctoral thesis, Liverpool John Moores University.

Kokkarinen, N I A (2012) Development of a measurement tool to assess sustainability in the built environment curriculum using psychological constructs. Doctoral thesis, Liverpool John Moores University.

Kot, P (2017) The feasibility of using EM waves in determining the moisture content and factors effecting measurements in building fabrics. Doctoral thesis, Liverpool John Moores University.

Labib, W A (2008) An experimental study and finite analysis of punching shear failure in steel fibre-reinforced concrete ground -suspended floor slabs. Doctoral thesis, Liverpool John Moores University.

Leiblein, T (2020) WATER SAFETY MANAGEMENT, LEGIONELLA PREVENTION AND RISK MANAGEMENT IN HOSPITALS: A FRAMEWORK FOR ESTATES AND FACILITIES MANAGEMENT IN ENGLAND. Doctoral thesis, Liverpool John Moores University.

Marsh, D (2017) Building Information Modelling (BIM) and the UK Quantity Surveying Organisation: A Framework for Value Creation. Doctoral thesis, Liverpool John Moores University.

Masuri, MRAM (2015) Optimising The Role Of Facilities Management (FM) In The Property Development Process (DP):The Development Of An FM-DP Integration Framework. Doctoral thesis, Liverpool John Moores University.

Menoka, B (2014) Stakeholder Engagement and Sustainability-Related Project Performance in Construction. Doctoral thesis, Liverpool John Moores University.

Meraghni, L (1997) An integrated information model for construction materials management. Doctoral thesis, Liverpool John Moores University.

Mulliner, E K (2012) A model for the complex assessment of sustainable housing affordability. Doctoral thesis, Liverpool John Moores University.

Nesensohn, C (2014) AN INNOVATIVE FRAMEWORK FOR ASSESSING LEAN CONSTRUCTION MATURITY. Doctoral thesis, Liverpool John Moores University.

Prochorskaite, A (2016) An investigation of the ‘soft’ features of sustainable and healthy housing design: Exploring stakeholder preferences and their provision in new housing developments. Doctoral thesis, Liverpool John Moores University.

Raftery, JJ (1984) An investigation of the suitability of cost models for use in building design. Doctoral thesis, Liverpool John Moores University.

Shubbar, A (2021) Development of Unfired Brick Through Alkali Activation Using Waste from Aggregate Recycling Facility as an Alternative to Conventional Fired Clay Brick. Doctoral thesis, Liverpool John Moores University.

Sindhu, A (2019) DEVELOPMENT OF AFFORDABLE HOUSING FRAMEWORK FOR LOW-INCOME HOUSEHOLDS IN PAKISTAN. Doctoral thesis, Liverpool John Moores University.

Smith, CR (2001) Procuring the urban house in paradise. Doctoral thesis, Liverpool John Moores University.

Tibke, SW (1982) Air entrainment in vertical dropshafts. Doctoral thesis, Liverpool John Moores University.

Unterhitzenberger, C (2017) Organizational Justice and its Impact on Project Performance: An Explanatory Framework in the Context of the Construction Industry. Doctoral thesis, Liverpool John Moores University.

Van Der Bergh, JM (2023) Bio-inspired Bacteria-based Concrete for Durability Increase of Structures. Doctoral thesis, Liverpool John Moores University.

Walker, A (1980) A model for the design of project management structures for building clients. Doctoral thesis, Liverpool John Moores University.

Wilson, HK (2017) Perceptions of Quality in Higher Education Learning Environments and the Impact of Personality Types on Satisfaction: The Development of a Practical Framework. Doctoral thesis, Liverpool John Moores University.

Wormald, R (1998) Solar energy in construction : an assessment of solar wall thermal performance in Europe. Doctoral thesis, Liverpool John Moores University.