Facial reconstruction

Search LJMU Research Online

Browse Repository | Browse E-Theses

Items where Subject is "TS Manufactures"

Up a level
Export as [feed] Atom [feed] RSS
Group by: Creators | Item Type
Number of items at this level: 27.

Article

Batako, A (2023) Experimental Investigation into the Effect of Magnetorheological Fluid Damper on Vibration and Chatter in Straight Turning Process. Journal of Manufacturing Processes, 99. pp. 825-847. ISSN 1526-6125

Du, H, Zhao, Y and Ge, X (2020) Innovative Design of Traffic Equipment Based on Future Trend Prediction. Solid State Technology, 63 (2). pp. 1609-1618. ISSN 0038-111X

Garg, P, Gupta, B, Sar, A, Graham, G and Shore, AP (2024) Development and validation of an instrument to measure the perceived benefits of digitalization in manufacturing. IEEE Transactions on Engineering Management. pp. 1-20. ISSN 0018-9391

Jamal, M and Morgan, MN (2017) Design Process Control for Improved Surface Finish of Metal Additive Manufactured Parts of Complex Build Geometry. Inventions, 2 (4). ISSN 2411-5134

Jamal, M, Morgan, MN and Peavoy, D (2017) A digital process optimization, process design and process informatics system for high-energy abrasive mass finishing. International Journal of Advanced Manufacturing Technology, 92. pp. 303-319. ISSN 0268-3768

Karaghool, HAK, Hashim, KS, Kot, P and Muradov, M (2022) Preliminary Studies of Methylene Blue Remotion from Aqueous Solutions by Ocimum basilicum. Environments, 9 (2). ISSN 2076-3298

Kundrák, J, Mitsyk, AV, Fedorovich, VA, Morgan, MN and Markopoulos, AP (2019) The Use of the Kinetic Theory of Gases to Simulate the Physical Situations on the Surface of Autonomously Moving Parts During Multi-Energy Vibration Processing. Materials, 12 (19). ISSN 1996-1944

Opoz, T, Burgess, A, Ahuir Torres, J, Kotadia, HR and Tammas-Williams, S (2024) The effect of surface finish and post-processing on mechanical properties of 17-4 PH stainless steel produced by the atomic diffusion additive manufacturing process (ADAM). International Journal of Advanced Manufacturing Technology, 130. pp. 4053-4066. ISSN 0268-3768

Smith, CJ, Derguti, F, Nava, EH, Thomas, M, Tammas-Williams, S, Culizia, S, Fraser, D and Todd, I (2015) Dimensional accuracy of Electron Beam Melting (EBM) additive manufacture with regard to weight optimized truss structures. Journal of Materials Processing Technology, 229. pp. 128-138. ISSN 0924-0136

Yang, X, Gibbons, GJ, Tanner, DA, Li, Z, Wilson, P, Williams, MA and Kotadia, HR (2023) Scan strategy induced microstructure and consolidation variation in the laser-powder bed fusion (L-PBF) additive manufacturing of low alloy 20MnCr5 steel. Materials and Design, 232. ISSN 0264-1275

Conference or Workshop Item

Chabuk, A, Hammood, ZA, Abed, SA, Kadhim, MMA, Hashim, KS, Al-Ansari, N and Laue, J (2021) Noise Level in Textile Industries: Case Study Al-Hillah Textile Factory-Company for Textile Industries, Al-Hillah-Babylon-Iraq. In: IOP Conference Series: Earth and Environmental Science , 790 (1). (First International Virtual Conference on Environment & Natural Resources, 24-25 March 2021, University of Al-Qadisiyah, Iraq).

Chen, X and Wharton, J Functional microstructural surface manufacturing and assessment. In: 5th International Conference of Bionic Engineering (ICBE'16), 21st-24th June 2016, Ningbo, China. (Unpublished)

Mahyoub, M, Abdulhussain, SH, Natalia, F, Sudirman, S and Mahmmod, BM (2023) Abstract Pattern Image Generation using Generative Adversarial Networks. In: Proceedings - 2023 15 International Conference on Developments in eSystems Engineering, (DESE) , 2023-J. pp. 172-177. (2023 15 International Conference on Developments in eSystems Engineering, (DESE), 09-12 January 2023, Baghdad & Anbar, Iraq).

Thesis

Abdul-Rahman, H (2007) Three-dimensional Fourier Fringe Analysis and phase unwrapping. Doctoral thesis, Liverpool John Moores University.

Cai, R (2002) Assessment of vitrified CBN wheels for precision grinding. Doctoral thesis, Liverpool John Moores University.

Colquhoun, G J (1996) Developments to graphical modelling methods and their applications in manufacturing systems analysis and design. Doctoral thesis, Liverpool John Moores University.

Dagiloke, IF (1995) Computer aided process parameter selection for high speed machining. Doctoral thesis, Liverpool John Moores University.

Goodall, C (1990) A study of the throughfeed centreless grinding process with particular reference to the size accuracy. Doctoral thesis, Liverpool John Moores University.

Karout, S (2007) Two-dimensional phase unwrapping. Doctoral thesis, Liverpool John Moores University.

Kirwan, J (2021) MECHANICAL PROPERTIES AND CRACK RETARDATION OF GLASS FIBRE MICROASPHALT. Doctoral thesis, Liverpool John Moores University.

Li, B (2009) Development of an inverse FE modelling method for material parameters identification based on indentation tests. Doctoral thesis, Liverpool John Moores University.

Lin, Z (1999) An investigation of temperature in form grinding. Doctoral thesis, Liverpool John Moores University.

Lopez Marrero, A (2020) A New Simulation Tool for the Predictive Assessment of Fluidized and Circulatory Granular Flow Behaviour. Doctoral thesis, Liverpool John Moores University.

Morgan, M N (1995) Modelling for the prediction of thermal damage in grinding. Doctoral thesis, Liverpool John Moores University.

Reyes Moro, A (2000) Scheduling of flexible manufacturing systems integrating petri nets and artificial intelligence methods. Doctoral thesis, Liverpool John Moores University.

Tokucoglu, H (2021) A MANUFACTURING COST ESTIMATION BY UTILIZING A NOVEL SENSOR BASED COST MODEL IN A KNOWLEDGE MANAGEMENT SYSTEM. Doctoral thesis, Liverpool John Moores University.

Wharton, JT (2018) Structural Functional Surface Design and Manufacture. Doctoral thesis, Liverpool John Moores University.

This list was generated on Sat Dec 7 15:41:01 2024 UTC.