Facial reconstruction

Search LJMU Research Online

Browse Repository | Browse E-Theses

Testing, numerical simulation and design of prestressed high strength steel arched trusses

Afshan, S, Theofanous, M, Wang, J, Gkantou, M and Gardner, L (2019) Testing, numerical simulation and design of prestressed high strength steel arched trusses. Engineering Structures, 183. pp. 510-522. ISSN 0141-0296

[img] Text
2019-Testing, numerical simulation and design of prestressed high strength steel arched trusses.pdf - Accepted Version
Restricted to Repository staff only until 15 January 2020.
Available under License Creative Commons Attribution Non-commercial No Derivatives.

Download (1MB)

Abstract

The structural behaviour of prestressed high strength steel arched trusses is studied in this paper through experimentation and numerical modelling. Four 11 m span prestressed arched trusses fabricated from S460 hot finished square hollow section members were loaded vertically to failure. Three of the tested trusses were prestressed to different levels by means of a 7-wire strand cable housed within the bottom chord, while the fourth truss contained no cable and served as a control specimen. Each truss was loaded at five points coinciding with joint locations along its span, and the recorded load-deformation responses at each loading point are presented. Inclusion and prestressing of the cable was shown to delay yielding of the bottom chord and enhance the load carrying capacity of the trusses, which ultimately failed by either in-plane or out-of-plane buckling of the top chord. For the tested trusses, around 40% increases in structural resistance were achieved through the addition of the cable, though the self-weight was increased by only approximately 3%. In parallel with the experimental programme, a finite element model was developed and validated against the test results. Upon successful replication of the experimentally observed structural response of the trusses, parametric studies were conducted to investigate the effect of key parameters such as prestress level, material grade and the top chord cross-section on the overall structural response. Based on both the experimental and numerical results, design recommendations in the form of simple design checks to be performed for such systems are provided. © 2019

Item Type: Article
Uncontrolled Keywords: 0905 Civil Engineering
Subjects: T Technology > TA Engineering (General). Civil engineering (General)
Divisions: Civil Engineering
Publisher: Elsevier
Date Deposited: 28 Jan 2019 11:00
Last Modified: 28 Jan 2019 11:06
DOI or Identification number: 10.1016/j.engstruct.2019.01.007
URI: http://researchonline.ljmu.ac.uk/id/eprint/10042

Actions (login required)

View Item View Item