A

AL-Ansari, NA, Abdellatif, M, Ezeelden, M, Ali, SS and Knutsson, S (2014) Climate Change and Future Long Term Trends of Rainfall at North-eastern Part of Iraq. Journal of Civil Engineering and Architecture, 8 (6). pp. 790-805. ISSN 1934-7367

Abadel, AA, Nasr, MS, Shubbar, A, Hashim, TM and Tuladhar, R (2023) Potential Use of Rendering Mortar Waste Powder as a Cement Replacement Material: Fresh, Mechanical, Durability and Microstructural Properties. Sustainability, 15 (15). ISSN 2071-1050

Abbas, A, Carnacina, I, Ruddock, F, Alkhaddar, R, Rothwell, G and Andoh, R (2020) The hydraulic performance of the storm chamber in a new manhole designed for separate sewer systems. Journal of Hydraulic Research. ISSN 0022-1686

Abbas, A, Carnacina, I, Ruddock, F, Alkhaddar, R, Rothwell, G and Andoh, R (2019) An innovative method for installing a separate sewer system in narrow streets. Journal of Water Management Modeling, 27. ISSN 2292-6062

Abbas, A, Dulaimi, AF, Shanbara, HK and Ruddock, F (2017) Impact of New Method for Laying Separate Sewer System on Pavement Layers. In: The 3rd BUiD Doctoral Research Conference . pp. 223-232. (The 3rd BUiD Doctoral Research Conference, 13 May 2017 - 14 May 2017, Dubai, UAE).

Abbas, A, Ruddock, F, Al Khaddar, RM, Rothwell, G and Andoh, R (2017) An innovative method for the construction of a separate sewer system in narrow streets in UK and EU cities. In: Faculty Research Week LJMU . (Faculty Research Week LJMU, 22 May 2017 - 26 May 2017, Liverpool, UK).

Abbas, A, Ruddock, F, Alkhaddar, R, Rothwell, G and Andoh, R (2018) Improving the geometry of manholes designed for separate sewer systems. Canadian Journal of Civil Engineering, 46 (1). pp. 13-25. ISSN 0315-1468

Abbas, A, Ruddock, F, Alkhaddar, R, Rothwell, G, Carnacina, I and Andoh, R (2019) Experimental data used to validate the FE model of the structural performance of two flexible pipes laid in a single trench. Data in Brief, 27. ISSN 2352-3409

Abbas, A, Ruddock, F, Alkhaddar, R, Rothwell, G, Carnacina, I and Andoh, R (2019) Investigation of the structural performance of two flexible pipes set in one trench with a new placement method for separate sewer systems. Tunnelling and Underground Space Technology, 92. ISSN 0886-7798

Abbas, A, Salloom, G, Ruddock, F, Alkhaddar, R, Hammoudi, S, Andoh, R and Carnacina, I (2019) Modelling data of an urban drainage design using a Geographic Information System (GIS)database. Journal of Hydrology, 574. ISSN 0022-1694

Abbasi, MH (2024) Phasing out fossil fuel heating in UK homes: A multi-dimensional framework for sustainability assessment of alternatives and their lifecycle implications. Doctoral thesis, Liverpool John Moores University.

Abbasi, MH, Abdullah, B, Ahmad, MW, Rostami, A and Cullen, J (2022) Bringing fuel poverty forward from post-intervention evaluations to design and decision-making stages. People, Place and Policy Online. pp. 1-9. ISSN 1753-8041

Abbasi, MH, Abdullah, B, Ahmad, MW, Rostami, A and Cullen, J (2021) Heat transition in the European building sector: Overview of the heat decarbonisation practices through heat pump technology. Sustainable Energy Technologies and Assessments, 48. ISSN 2213-1388

Abbasi, MH, Abdullah, B, Castaño-Rosa, R, Ahmad, MW and Rostami, A (2023) A framework to identify and prioritise the key sustainability indicators: Assessment of heating systems in the built environment. Sustainable Cities and Society, 95. ISSN 2210-6707

Abdel-Raheem, A, Dulaimi, A, Mohamed, AS, Moussa, GS, Özkılıç, YO, Mashaan, N, Jaya, RP and Abdel-Wahed, T (2023) Investigating the Potential of High-Density Polyethylene and Nano Clay Asphalt-Modified Binders to Enhance the Rutting Resistance of Asphalt Mixture. Sustainability, 15 (18). ISSN 2071-1050

Abdel-Wahed, T and Al Nageim, H (2016) Investigating the effects of cement and cement kiln dust as a filler on the mechanical properties of cold bituminous emulsion mixtures. International Journal of Civil Engineering and Technology, 7 (1). pp. 441-453. ISSN 0976-6308

Abdel-Wahed, T, Dulaimi, A, Shanbara, HK and Al Nageim, H (2022) The Impact of Cement Kiln Dust and Cement on Cold Mix Asphalt Characteristics at Different Climate. Sustainability (Switzerland), 14 (7). p. 4173.

Abdeldayem, Z (2019) Automatic Weighted Splines Filter (AWSF): A New Algorithm for Extracting Terrain Measurements From Raw LiDAR Point Clouds. IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing. pp. 1-12. ISSN 1939-1404

Abdellatif, M, Atherton, W and Alkhaddar, R (2013) Application of the stochastic model for temporal rainfall disaggregation for hydrological studies in north western England. JOURNAL OF HYDROINFORMATICS, 15 (2). pp. 555-567. ISSN 1464-7141

Abdellatif, M, Atherton, W, Alkhaddar, R and Osman, Y (2014) Application of the UKCP09 WG Outputs to Assess Performance of Combined Sewers System in a Changing Climate. JOURNAL OF HYDROLOGIC ENGINEERING, 20 (9). ISSN 1084-0699

Abdellatif, M, Baynes, S, Osman, Y, Brady, LJ, Cullen, J and King, D (2020) Experimental investigation of Versa Tyle GRP for solar thermal system. International Journal of Green Energy. ISSN 1543-5075

Abdellatif, M, Osman, Y and Al Khaddar, RM (2020) Towards a Low Carbon Design: A case study of an Industrial Building. In: INTERNATIONAL ARCHITECTURE AND ART CONGRESS, 2020 . (3rd International Congress on Architecture and Design, 18 April 2020 - 19 April 2020, Istanbul Turkey).

Abdou, AA (2014) AN INVESTIGATION OF SHORT RANGE ELECTROMAGNETIC WAVE COMMUNICATION FOR UNDERWATER ENVIRONMENTAL MONITORING UTILISING A SENSOR NETWORK PLATFORM. Doctoral thesis, Liverpool John Moores University.

Abdul Halim, W (2020) Risk Assessment and Decision Making of Security in Container Port Facilities. Doctoral thesis, Liverpool John Moores University.

Abdul-Rahman, H (2007) Three-dimensional Fourier Fringe Analysis and phase unwrapping. Doctoral thesis, Liverpool John Moores University.

Abdulhadi, B (2022) Enhancing the removal of refractory pollutants from water using microwave-electrocoagulation system. Doctoral thesis, Liverpool John Moores University.

Abdulhadi, B, Kot, P, Hashim, KS, Shaw, A, Muradov, M and Al Khaddar, RM (2020) Continuous-flow electrocoagulation (EC) process for iron removal from water: Experimental, statistical and economic study. Science of The Total Environment. ISSN 0048-9697

Abdulhasan, IK, Joni, HH, Saadoon, TD and Dulaimi, A (2024) Optimizing asphalt binder performance with various PET types. Open Engineering, 14 (1).

Abduljabbar, N, Al-Busaltan, S, Dulaimi, AF, Al-Yasari, R, Sadique, MM and Nageim, HA (2021) The effect of waste low-density polyethylene on the mechanical properties of thin asphalt overlay. Construction and Building Materials, 315. ISSN 0950-0618

Abdulqader, DA, Hathal, MS, Mahmmod, BM, Abdulhussain, SH and Al-Jumeily, D (2022) Plain, Edge, and Texture Detection Based on Orthogonal Moment. IEEE Access, 10. pp. 114455-114468. ISSN 2169-3536

Abdulredha, M, Muhsin, AA, Al-Janabi, A, Alajm, BN, Gkantou, M, Amoako-Attah, J, Al-Jumeily, D, Mustafina, J and AlKhayyat, A (2021) Using SF and CKD as cement replacement materials for producing cement mortar. In: IOP Conference Series: Materials Science and Engineering , 1058 (1). 012007-012007. (1st Conference on Science and Technology for Early Career Researchers and Postgraduate Students (STEPS 2020), 20-22 December 2020, Erbil, Iraq).

Abdulredha, MAA, Kot, P, Al Khaddar, RM, Jordan, D and Abdulridha, A (2018) Investigating municipal solid waste management system performance during the Arba’een event in the city of Kerbala, Iraq. Environment, Development and Sustainability. ISSN 1387-585X

Abdulsahib, I, Hilal, MM, Fattah, MY and Dulaimi, A (2024) Performance evaluation of grouted porous asphalt concrete. Open Engineering, 14 (1).

Abed, AM, Mouziraji, HR, Bakhshi, J, Dulaimi, A, Mohammed, HI, Ibrahem, RK, Ben Khedher, N, Yaïci, W and Mahdi, JM (2022) Numerical analysis of the energy-storage performance of a PCM-based triplex-tube containment system equipped with arc-shaped fins. Frontiers in Chemistry, 10.

Abeer, SZ, Abdulridha, SQ, Salah Nasr, M, Ali Hasan, Z and Shubbar, A (2024) Improving the mechanical behavior of pervious concrete using polypropylene and waste rope fibers. Al-Qadisiyah Journal for Engineering Sciences, 17 (1). pp. 38-46. ISSN 1998-4456

AbuShawish, I, Mahmoud, S, Majzoub, S and Hussain, A (2023) Biomedical Amplifiers Design Based on Pseudo-resistors: A Review. IEEE Sensors Journal, 23 (14). pp. 15225-15238. ISSN 1530-437X

Adam, D, Matellini, DB and Kaparaki, A (2023) Benefits for the bunker industry in adopting blockchain technology for dispute resolution. Blockchain: Research and Applications, 4 (2). ISSN 2096-7209

Adeniyi, O (2019) A STUDY OF THE THERMAL CYCLING PERFORMANCE OF SOLDER JOINTS IN AREA ARRAY PACKAGING. Doctoral thesis, Liverpool John Moores University.

Adesi, M, Ewuga, D, Owusu-Manu, D-G, Boateng, F and Kissi, E (2023) COVID-19 pandemic disruptions and environmental turbulence in architectural, engineering and construction project delivery space. International Journal of Building Pathology and Adaptation. ISSN 2398-4708

Afshan, S, Theofanous, M, Wang, J, Gkantou, M and Gardner, L (2019) Testing, numerical simulation and design of prestressed high strength steel arched trusses. Engineering Structures, 183. pp. 510-522. ISSN 0141-0296

Ahmad, MW, Mouraud, A, Rezgui, Y and Mourshed, M (2018) Deep highway networks and tree-based ensemble for predicting short-term building energy consumption. Energies, 11 (12). ISSN 1996-1073

Ahmed, U, Malkeson, SP, Pillai, AL, Chakraborty, N and Kurose, R (2023) Flame self-interaction during turbulent boundary layer flashback of hydrogen-rich premixed combustion. Physical Review Fluids, 8 (2).

Ahuir Torres, J (2023) Microscopy Techniques to Analyse the Characteristics of the Metallic Materials. Journal of Materials and Electronic Devices, 1 (1). pp. 33-53.

Ahuir Torres, J, Kotadia, H, Opoz, T and Sharp, MC (2023) A Study on the Corrosion Behaviour of Laser Textured Pure Aluminium in Saltwater. Processes, 11 (3). ISSN 2227-9717

Ahuir Torres, JI, Burgess, A, Sharp, MC, Opoz, T, Malkeson, SP, Falkingham, PL, Darlington, RI and Tammas-Williams, S (2024) A Study of the Corrosion Resistance of 316L Stainless Steel Manufactured by Powder Bed Laser Additive Manufacturing. Applied Sciences, 14 (17).

Ahuir Torres, JI, Chen, X, Mason, L, Gambron, P, Walker, DD, Yu, G, Li, H, Mishra, R, Akar, Y, Jackson, FF and Bingham, PA (2024) Study of the normal force and velocity influence on the fused silica scratching mechanisms with α-alumina grit at atomic scale via Reaxff reactive molecular dynamic simulations. International Journal of Abrasive Technology, 12 (1). pp. 37-62. ISSN 1752-2641

Ahuir Torres, JI, Kotadia, HR and Opoz, TT (2023) Effect of the electrical discharge machining on Ti6Al4V corrosion behaviour in simulated body fluid. Surface and Coatings Technology, 470. ISSN 0257-8972

Ahuir-Torres, JI, Batako, ADL, Khidasheli, N, Bakradze, N and Zhu, G (2024) Improving Commercial Motor Bike Rim Disc Hardness Using a Continuous-Wave Infrared Fibre Laser. Journal of Manufacturing and Materials Processing, 8 (1). p. 18.

Ahuir-Torres, JI, Chadwick, J, West, G, Kotadia, HR and Opoz, TT (2024) Effect of electrical discharge machining (EDM) bath composition on long-term corrosion of Ti-6Al-4V in simulated body fluid. Electrochimica Acta, 503. ISSN 0013-4686

Ahuir-Torres, JI, Chen, X, Mason, L, Gambron, P, Walker, DD, Yu, G, Li, H, Mishra, R, Akar, Y, Jackson, FF and Bingham, PA (2022) Study of the Normal Force and Velocity Influence on the Fused Silica Scratching Mechanisms with α-Alumina Grit at Atomic Scale via Reaxff Reactive Molecular Dynamic Simulations. In: Proceedings of the 24th International Symposium on Advances in Abrasive Technology . (The 24th International Symposium on Advances in Abrasive Technology (ISAAT), 9th-12th December 2022, Guangzhou, China).

Ahuir-Torres, JI, Sharp, M, Bakradze, N and Batako, ADL (2022) Microstructural Design of the Cast Iron via Laser Hardening with Defocused Beam of the Continuous Wave CO2 Laser. In: Journal of Physics: Conference Series , 2198 (1). 012048-012048. (15th Global Congress on Manufacturing and Management (GCMM 2021), Liverpool, UK).

Ahuir-Torres, JI and Sharp, MC (2022) Influence of Pulse Energy and a Material’s Magnetic Field on the Morphology of the Dimples Produced with Nanosecond Pulsed Laser on a Magnet. Lasers in Manufacturing and Materials Processing. ISSN 2196-7229

Ahuir-Torres, JI, Sharp, MC and Seddighi, M (2020) Influence of the surface roughness and pulse energy in the production of dimple features on Cr2O3 surfaces. In: Procedia CIRP , 94. pp. 930-935. (11th CIRP Conference on Photonic Technologies, 7-10th September 2020, Virtual Conference).

Ahuir-Torres, JI, Simandjuntak, S, Bausch, N, Farrar, A, Webb, S, Nash, A, Thomas, B, Muna, J, Jonsson, C and Matthew, D (2019) Corrosion threshold data of metallic materials in various operating environment of offshore wind turbine parts (tower, foundation, and nacelle/gearbox). Data in Brief, 25. ISSN 2352-3409

Ahuja, R, Sawhney, A and Arif, M (2017) Prioritizing BIM Capabilities of an Organization: An Interpretive Structural Modeling Analysis. In: Procedia Engineering , 196. pp. 2-10. (Creative Construction Conference 2017, 19 June 2017 - 22 June 2017, Primosten, Croatia).

Akashah, FW, Baaki, TK, Anuar, MF, Azmi, NF and Yahya, Z (2020) Factors Affecting Adoption of Emergency Evacuation Strategies in High-Rise Office Buildings. Journal of Design and Built Environment, 20 (3). pp. 1-21. ISSN 1823-4208

Akashah, FW, Baaki, TK and Lee, SP (2017) Fire risk assessment of low cost high rise residential buildings in Kuala Lumpur: A case study. Journal of Design and Built Environment, 17. ISSN 1823-4208

Akbar, M, Pan, H, Ou, G, Nikitas, G and Ahmad, B (2023) Seismic Response Compression of Various MSE Walls Based on 3D Modeling. Buildings, 13 (11).

Al Biajawi, MI, Embong, R and Shubbar, A (2023) Engineering properties of self-compacting concrete incorporating coal bottom ash (CBA) as sustainable materials for green concrete: a review. Journal of Building Pathology and Rehabilitation, 8 (2). ISSN 2365-3159

Al Hawesah, H (2022) Development of Polymer Modified Pelletised Bitumin for Utility Reinstatements and Emergency Pothole Repair. Doctoral thesis, Liverpool John Moores University.

Al Hawesah, H, Sadique, MM, Harris, C, Al Nageim, H, Stopp, K, Pearl, H and Shubbar, A (2021) A Review on Improving Asphalt Pavement Service Life Using Gilsonite-Modified Bitumen. Sustainability, 13 (12). ISSN 2071-1050

Al Hawesah, H, Sadique, MM, Harris, C, Al Nageim, H, Stopp, K, Pearl, H and Shubbar, AAF (2021) Improving the Temperature Sensitivity of Bitumen for Emergency Pavement Repair. Periodica Polytechnica Civil Engineering. ISSN 0553-6626

Al Khafaji, ZS and Ruddock, F (2018) Study the retardant effect of using different sugar's types on setting time and temperature of cement paste. International Journal of Civil Engineering and Technology, 9 (1). ISSN 0976-6308

Al Mohammad, A, ÇEVİK, A, Jwaida, Z and Shubbar, A (2024) Effect of Expanded Glass Lightweight Aggregate on the Performance of Geopolymer Mortar at Elevated Temperatures. Iranian Journal of Science and Technology, Transactions of Civil Engineering. ISSN 2228-6160

Al Nageim, H, Al-Khuzaie, A, Seton, L, Croft, J and Drake, J (2024) Wastewater sludge ash in the production of a novel cold mix asphalt (CMA): durability, aging and toxicity characteristics. Kufa Journal of Engineering, 15 (1). pp. 147-162. ISSN 2071-5528

Al Sa'd, M S (2011) A real-time multi-sensor 3D surface shape measurement system using fringe analysis. Doctoral thesis, Liverpool John Moores University.

Al-Attabi, AW, Harris, C, Alkhaddar, R, Alzeyadi, A, Jebur, AAJ and Hashim, KS (2017) Ammonia Removal using Sequencing Batch Reactor: The Effects of Organic Loading Rate. In: International Conference for Doctoral Research . (3rd BUiD Annual Doctoral Research Conference 2017, 13 May 2017 - 13 May 2017, Dubai, UAE).

Al-Baghdadi, HM, Mahan, HM, Shubbar, AAF and Al-Khafaji, ZS (2022) Studying the Impact of Imposed Actual Loads on the Non-Destructive Test Results for Evaluating the Compressive Strength and Other Properties of Concrete. International Review of Civil Engineering (IRECE), 13 (3). ISSN 2036-9913

Al-Baghdadi, HM, Shubbar, AAF and Al-Khafaji, ZS (2021) The Impact of Rice Husks Ash on Some Mechanical Features of Reactive Powder Concrete with High Sulfate Content in Fine Aggregate. International Review of Civil Engineering (IRECE), 12 (4). pp. 248-254. ISSN 2036-9913

Al-Bdairi, N, Zubaidi, S, Al-Bugharbee, H, Hashim, KS, Farhan, S and Al Defae, A (2021) Forecasting of Air Maximum Temperature on Monthly Basis Using Singular Spectrum Analysis and Linear Autoregressive Model. In: IOP Conference Series : Earth and Environmental Science . (IOP Conference Series: Earth and Environmental Science,, 1st-2nd September 2021, Erbil, Iraq).

Al-Busaltan, S, Dulaimi, A, Al-Nageim, H, Mahmood, S, Kadhim, MA, Al-Kafaji, M and Özkılıç, YO (2023) Improving the Mechanical Properties and Durability of Cold Bitumen Emulsion Mixtures Using Waste Products and Microwave Heating Energy. Buildings, 13 (2).

Al-Darraji, F, Sadique, MM, Alahmari, TS, Yu, Z, Shubbar, A and Marolt Cebasek, T (2024) Investigation of new confined concrete-filled aluminum tube piles: Experimental and numerical approaches. Results in Engineering, 24. ISSN 2590-1230

Al-Darraji, F, Sadique, MM, Marolt Cebasek, T, Ganguli, A, Yu, Z and Hashim, K (2023) A Systematic Review of the Geotechnical and Structural Behaviors of Fiber-Reinforced Polymer Composite Piles. Geosciences, 13 (3). ISSN 2076-3263

Al-Faluji, D, Al-Rubaye, MM, Nasr, MS, Shubbar, AAF, Al-Khafaji, ZS, Alkhayyat, A and Abdulraheem, MS (2021) Impact of Substitute Portland Cement with CKD on the Mechanical and Durability Characteristics of Cement Mortar. IOP Conference Series: Materials Science and Engineering, 1090 (1). ISSN 1757-8981

Al-Hashimi, O (2024) Tetracycline remediation in simulated groundwater using wastepaper sludge ash based permeable reactive barrier. Doctoral thesis, Liverpool John Moores University.

Al-Hashimi, O, Hashim, K, Loffill, E, Nakouti, I, Faisal, A and Marolt Cebasek, T (2023) Eco‑friendly remediation of tetracycline antibiotic from polluted water using waste‑derived surface re‑engineered silica sand. Scientific Reports, 13. pp. 1-17. ISSN 2045-2322

Al-Hashimi, O, Hashim, K, Loffill, E, Nakouti, I, Faisal, AAH and Cebasek, T (2022) Kinetic and Equilibrium Isotherm Studies for The Removal of Tetracycline from Aqueous Solution Using Engineered Sand Modified with Calcium Ferric Oxides. Environments, 10 (1). ISSN 2076-3298

Al-Hashimi, O, Hashim, KS, Loffill, E, Marolt Cebasek, T, Nakouti, I, Faisal, AAH and Al-Ansari, N (2021) A comprehensive review for groundwater contamination and remediation: occurrence, migration and adsorption modeling. Molecules, 26 (19). ISSN 1420-3049

Al-Hdabi, A and Al Nageim, H (2016) Improving asphalt emulsion mixtures properties containing cementitious filler by adding GGBS. Journal of Materials in Civil Engineering, 29 (5). ISSN 0899-1561

Al-Husseinawi, FN, Atherton, W, Al-Khafaji, Z, Sadique, M and Yaseen, ZM (2022) The Impact of Molar Proportion of Sodium Hydroxide and Water Amount on the Compressive Strength of Slag/Metakaolin (Waste Materials) Geopolymer Mortar. Advances in Civil Engineering, 2022. pp. 1-14. ISSN 1687-8086

Al-Khafaji, R, Dulaimi, A, Jafer, H, Mashaan, NS, Qaidi, S, Obaid, ZS and Jwaida, Z (2023) Stabilization of Soft Soil by a Sustainable Binder Comprises Ground Granulated Blast Slag (GGBS) and Cement Kiln Dust (CKD). Recycling, 8 (1).

Al-Khafaji, ZS, Falah, MW, Shubbar, AAF, Nasr, MS, Al-Mamoori, SF, Alkhayyat, A, Al-Rifaie, A, Eissa, A, Latif Al-Mufti, RA and Hashim, KS (2021) The Impact of Using Different Ratios of Latex Rubber on the Characteristics of Mortars Made with GGBS and Portland Cement. IOP Conference Series: Materials Science and Engineering, 1090 (1). ISSN 1757-8981

Al-Khafaji, ZS, Majdi, A, Shubbar, AAF, Nasr, MS, Al-Mamoori, SF, Alkhayyat, A, Al-Rifaie, A, Al-Emadi, N, Al-Mufti, RL, Sadique, MM and Hashim, KS (2021) Influence of High Volume RHA on Properties of Cement Mortar. IOP Conference Series: Materials Science and Engineering, 1090 (1). ISSN 1757-8981

Al-Khafaji, ZS, Majdi, A, Shubbar, AAF, Nasr, MS, Al-Mamoori, SF, Alkhulaifi, A, Al-Mufti, RL, Al-Rifaie, A, Alkhayyat, A and Hashim, KS (2021) Impact of high volume GGBS replacement and steel bar length on flexural behaviour of reinforced concrete beams. IOP Conference Series: Materials Science and Engineering, 1090 (1). ISSN 1757-8981

Al-Mahdy, A, Ahuir Torres, JI, Opoz, T, Kotadia, HR, Mullett, J and Sharp, MC (2024) An investigation into the use of incoherent UV light to augment IR nanosecond pulsed laser texturing of CFRP composites for improved adhesion. Optics and Laser Technology, 181. ISSN 0030-3992

Al-Mahdy, A, Kotadia, H, Sharp, MC, Opoz, T, Mullett, J and Ahuir Torres, JI (2022) Effect of Surface Roughness on the Surface Texturing of 316l Stainless Steel by Nanosecond Pulsed Laser. Lasers in Manufacturing and Materials Processing. ISSN 2196-7237

Al-Mamoori, SF, Shubbar, AAF, Al-Khafaji, ZS, Nasr, MS, Alkhayyat, A, Al-Rifaie, A, Latif Al-Mufti, RA, Sadique, MM and Hashim, KS (2021) Production of Ternary Blend Binder as an Alternative to Portland Cement. IOP Conference Series: Materials Science and Engineering, 1090 (1). ISSN 1757-8981

Al-Mansori, NJH, Alfatlawi, TJM, Hashim, KS and Al-Zubaidi, LS (2020) The Effects of Different Shaped Baffle Blocks on the Energy Dissipation. Civil Engineering Journal, 6 (5). pp. 961-973. ISSN 2676-6957

Al-Masoodi, Z, Dulaimi, AF, Jafer, H, Al-Khafaji, Z, Atherton, W and Hussien, SA (2022) Soft Soil Treated with Waste Fluid Catalytic Cracking as a Sustainable Stabilizer Material. Iraqi Geological Journal, 55 (1C). pp. 39-50. ISSN 2414-6064

Al-Merzah, S, Al-Busaltan, S and Al Nageim, H (2019) Characterizing Cold Bituminous Emulsion Mixtures Comprised of Palm Leaf Ash. Journal of Materials in Civil Engineering, 31 (6). ISSN 0899-1561

Al-Nawasir, R, Al-Humeidawi, B and Shubbar, A (2024) Influence of Sustainable Grout Material on the Moisture Damage of Semi-flexible Pavement. Periodica Polytechnica Civil Engineering. ISSN 0553-6626

Al-Rifaie, A, Al-Hassani, H and Shubbar, AAF (2021) Flexural behaviour of reinforced concrete beams with horizontal construction joints. IOP Conference Series: Materials Science and Engineering, 1090 (1). ISSN 1757-8981

Al-Rifaie, A, Al-Husainy, A, Dulaimi, AF and Shanbara, HK (2020) Shear performance of beam-column joints subjected to high loading rates. Journal of Engineering Science and Technology, 15 (6). pp. 3649-3660. ISSN 1823-4690

Al-Rifaie, A, Al-Husainy, AS, Al-Mansoori, T and Shubbar, AAF (2021) Flexural impact resistance of steel beams with rectangular web openings. Case Studies in Construction Materials, 14. ISSN 2214-5095

Al-Saati, N, Hussein, T, Abbas, M, Hashim, KS, Al-Saati, Z, Kot, P, Sadique, MM, Aljefery, M and Carnacina, I (2019) Statistical modelling of turbidity removal applied to non-toxic natural coagulants in water treatment: a case study. Desalination and Water Treatment, 150. pp. 406-412. ISSN 1944-3986

Al-Saati, NH, Omran, II, Salman, AA, Al-Saati, Z and Hashim, KS (2021) Statistical modeling of monthly streamflow using time series and artificial neural network models: Hindiya Barrage as a case study. Water Practice and Technology. ISSN 1751-231X

Al-Sareji, OJ, Grmasha, RALI, Salman, JM and Hashim, KS (2021) Street dust contamination by heavy metals in babylon governorate, Iraq. Journal of Engineering Science and Technology, 16 (1). pp. 455-469. ISSN 1823-4690

Al-Zahra, BIA, Alwash, M, Baiee, A and Shubbar, AA (2021) Limitations on aci code minimum thickness requirements for flat slab. Civil Engineering Journal, 7 (11). pp. 1918-1932. ISSN 2676-6957

Al-Zahra, BIA, Kadhim, MJ, Shadhan, KK and Shubbar, AA (2021) Limitations of Flexural Crack Width in Simply Supported One-Way Ribbed Slab. International Review of Civil Engineering, 12 (6). pp. 351-357. ISSN 2036-9913

Al-sareji, OJ, Grmasha, RA, Hashim, KS, Salman, JM and Al-Juboori, RA (2022) Personal exposure and inhalation doses to PM1 and PM2.5 pollution in Iraq: An examination of four transport modes. Building and Environment. ISSN 0360-1323

Alawadhi, A, Eliopoulos, C and Bezombes, F (2024) Temporal Monitoring of Simulated Burials in an Arid Environment Using RGB/Multispectral Sensor Unmanned Aerial Vehicles. Drones, 8 (9).

Alawadhi, A, Eliopoulos, C and Bezombes, F (2023) The detection of clandestine graves in an arid environment using thermal imaging deployed from an unmanned aerial vehicle. Journal of Forensic Sciences, 68 (4). pp. 1286-1291. ISSN 0022-1198

Alblooshi, M (2021) Exploring the Influence of Management Style on Job Satisfaction: The Case of Construction Companies in Abu Dhabi, the United Arab Emirates (UAE). Doctoral thesis, Liverpool John Moores University.

Aldeka, AB, Tziavos, NI, Gkantou, M, Dirar, S and Chan, AHC (2021) Seismic design of non-structural components mounted on irregular reinforced concrete buildings. Journal of Building Engineering, 46. ISSN 2352-7102

Alelwani, R, Ahmad, MW and Rezgui, Y (2020) Public Perception of Vernacular Architecture in the Arabian Peninsula: The Case of Rawshan. Buildings, 10 (9). ISSN 2075-5309

Alenezi, A, Hasan, H, Hashim, KS, Amoako-Attah, J, Gkantou, M, Muradov, M, Kot, P and Abdulhadi, B (2020) Zeolite-assisted electrocoagulation for remediation of phosphate from calcium-phosphate solution. In: IOP Conference Series: Materials Science and Engineering (888). (2nd International Conference on Civil and Environmental Engineering Technologies (ICCEET 2020), 10 June 2020 - 11 June 2020, Najaf, Iraq).

Alfalah, A, Stevenson, S, Heinig, S and D'Arcy, E (2022) Housing Affordability in a Resource Rich Economy: The Case of Kuwait. International Journal of Housing Markets and Analysis. ISSN 1753-8270

Alghanmi, A, Yang, Z and Blanco Davis, E (2017) A Fuzzy Rule-Based Bayesian Reasoning Approach for Risk Assessment of Petroleum Transportation Systems. In: IEEE’s 7th International Conference on Logistics, Informatics and Service Science (LISS 2017), 24 July 2017 - 27 July 2017, Kyoto, Japan and Beijing, China..

Alhajeri, S H H (2010) Online Electromagnetic Wave Monitoring System for Petroleum Industry Applications. Doctoral thesis, Liverpool John Moores University.

Alharbi, M, Edwards, G and Stocker, R (2022) Design and Simulation of Reversible Time Synchronized Quantum-Dot Cellular Automata Combinational Logic Circuits with Ultralow Energy. International Transaction Journal of Engineering, Management, & Applied Sciences & Technologies, 13 (12). pp. 1-22. ISSN 2228-9860

Alharbi, M, Edwards, G and Stocker, R (2024) Hybrid Quantum-Dot Cellular Automata Nanocomputing Circuits. Electronics, 13 (14).

Alharbi, M, Edwards, G and Stocker, R (2023) Novel ultra-energy-efficient reversible designs of sequential logic quantum-dot cellular automata flip-flop circuits. Journal of Supercomputing. ISSN 0920-8542

Alharbi, M, Edwards, G and Stocker, R (2024) An Ultra-Energy-Efficient Reversible Quantum-Dot Cellular Automata 8:1 Multiplexer Circuit. Quantum Reports, 6 (1). pp. 41-57. ISSN 2624-960X

Alhasan, M, Lakmes, A, Alobaidy, MG, Alhaeek, S, ASSAF, M, Dawson, L, Pirrie, D, Abdeldayem, Z and Bridge, JW (2023) A baseline survey of potentially toxic elements in the soil of north-west Syria following a decade of conflict. Environmental Science: Advances.

Ali, AS, Chua, SJL, Riley, ML and Gan, SW (2022) The Impact of Life Cycle Cost Analysis (LCC) Towards Maintenance Performance for High-Rise Residential Lift System. Journal of Design and Built Environment, 22 (1). pp. 1-12. ISSN 1823-4208

Ali, SB (2023) STRUCTURAL BEHAVIOUR AND DESIGN OF ALUMINIUM ALLOY-CONCRETE COMPOSITE STRUCTURAL MEMBERS. Doctoral thesis, Liverpool John Moores University.

Ali, SB, Kamaris, GS, Gkantou, M and Huang, Y (2024) Comparative Study of Life-Cycle Environmental and Cost Performance of Aluminium Alloy–Concrete Composite Columns. Sustainability, 16 (21).

Ali, SB, Kamaris, GS, Gkantou, M and Kansara, KD (2022) Concrete-filled and bare 6082-T6 aluminium alloy tubes under in-plane bending: Experiments, finite element analysis and design recommendations. Thin-Walled Structures, 172. ISSN 0263-8231

Ali, YA, Falah, MW, Ali, AH, Al-Mulali, MZ, Al-Khafaji, ZS, Hashim, TM, Al Sa'adi, AHM and Al-Hashimi, O (2022) Studying the effect of shear stud distribution on the behavior of steel-reactive powder concrete composite beams using ABAQUS software. Journal of the Mechanical Behavior of Materials, 31 (1). pp. 416-425. ISSN 0334-8938

Ali Grmasha, R, Al-sareji, OJ, M.Salman, J and Hashim, KS (2020) Polycyclic Aromatic Hydrocarbons (PAHs) in Urban Street Dust Within Three Land-Uses of Babylon Governorate, Iraq: Distribution, Sources, and Health Risk Assessment. Journal of King Saud University - Engineering Sciences. ISSN 1018-3639

Aljaaf, AJ, Mohsin, TM, Al-Jumeily, D and Alloghani, M (2021) A fusion of data science and feed-forward neural network-based modelling of COVID-19 outbreak forecasting in IRAQ. Journal of Biomedical Informatics, 118. ISSN 1532-0464

Alkhafaji, D and Wylie, SR (2018) Application of microwave analysis to monitoring slug flow in pipeline networks. Instrumentation Mesure Metrologie, 17 (3). ISSN 1631-4670

Alli, YA, Bamisaye, A, Bamidele, MO, Etafo, NO, Chkirida, S, Lawal, A, Hammed, VO, Akinfenwa, AS, Hanson, E, Nwakile, C, Kazeem, KO, Ayanwunmi, RJ, Ige, AS, Parga Torres, JR and Al Nageim, H (2024) Transforming waste to wealth: Harnessing carbon dioxide for sustainable solutions. Results in Surfaces and Interfaces, 17. ISSN 2666-8459

Almasi, S, Ahmadi, H, Asadi, F, Shahmoradi, L, Arji, G, Alizadeh, M and Kolivand, H (2022) Kinect-Based Rehabilitation Systems for Stroke Patients: A Scoping Review. BioMed Research International, 2022. p. 4339054. ISSN 2314-6133

Almatrafi, M, Theofanous, M, Dirar, S and Gkantou, M (2021) Structural response of cold-formed lipped Z purlins – Part 1: Experimental investigation. Thin-Walled Structures, 161. ISSN 0263-8231

Almuradi, S, Abdul Rasool, AA, Alkafaji, D, Ateeq, M and Al-Shamma'a, A (2015) Temperature Impact in Electromagnetic Non-Invasive Water/Oil/Gas Multiphase Real Time Monitoring. ASIAN JOURNAL OF ENGINEERING AND TECHNOLOGY, 3 (5). pp. 512-527. ISSN 2321 2462

Alremeihi, M, Norman, R, Pazouki, K, Dev, A and Bashir, M (2021) Advanced Intelligent Control Strategy in Dynamic Positioning (DP) System Applied to a Semi-Submersible Drilling Platform in The North Sea. In: Proceedings of the ASME 2021 40th International Conference on Ocean, Offshore and Arctic Engineering OMAE2021 , OMAE20. (40th International Conference on Ocean, Offshore & Arctic Engineering, 21-30 June 2021, Online).

Alremeihi, M, Norman, R, Pazouki, K, Dev, A and Bashir, M (2021) Performance of an Advanced Intelligent Control Strategy in a Dynamic Positioning (DP) System Applied to a Semisubmersible Drilling Platform. Journal of Marine Science and Engineering, 9 (4). ISSN 2077-1312

Alsaffar, AKK, Alquzweeni, SS, Al-Ameer, LR, Ali, AH, Mohamed, A, Aldaihani, HM, Reham, A, Al-Ansari, N, Al-Hashimi, O, Shubbar, A, Khan, MA and Hashim, KS (2023) Development of eco-friendly wall insulation layer utilising the wastes of the packing industry. Heliyon, 9 (11). pp. 1-9.

Alves, R, Faria, P and Brás, A (2019) Brita Lavada – An eco-efficient decorative mortar from Madeira Island. Journal of Building Engineering, 24. ISSN 2352-7102

Amalu, EH, Ekere, NN, Oduoza, CF and Zarmai, MT (2015) Evaluation of garofalo creep model for lead-free solder joints in surface mount components. In: NSTI: Advanced Materials - TechConnect Briefs 2015 , 4. pp. 282-285. (TechConnect Briefs 2015).

Amalu, EH, Short, M, Chong, PL, Hughes, DJ, Adebayo, DS, Tchuenbou-Magaia, F, Lähde, P, Kukka, M, Polyzou, O, Oikonomou, TI, Karytsas, C, Gebremedhin, A, Ossian, C and Ekere, NN (2023) Critical skills needs and challenges for STEM/STEAM graduates increased employability and entrepreneurship in the solar energy sector. Renewable and Sustainable Energy Reviews, 187. ISSN 1364-0321

Amin, M (2023) The Development of a MWCNT-DAO Biosensor for the Detection of Cadaverine in the Assessment of Periodontal Disease. Doctoral thesis, Liverpool John Moores University.

Amin, M, Abdullah, BM, Rowley-Neale, SJ, Wylie, S, Slate, AJ, Banks, CE and Whitehead, KA (2022) Diamine Oxidase-Conjugated Multiwalled Carbon Nanotubes to Facilitate Electrode Surface Homogeneity. Sensors, 22 (2). ISSN 1424-8220

Amin, M, Abdullah, BM, Wylie, SR, Rowley-Neale, SJ, Banks, CE and Whitehead, KA (2022) The Voltammetric Detection of Cadaverine Using a Diamine Oxidase and Multi-Walled Carbon Nanotube Functionalised Electrochemical Biosensor. Nanomaterials, 13 (1).

Amin, M, Preuss, A, Deisenroth, T, Liauw, CM, Verran, J and Whitehead, KA (2021) Use of spherical particles to understand conidial attachment to surfaces using atomic force microscopy. iScience, 24 (1). ISSN 2589-0042

Amoori Kadhim, M, Al-Busaltan, S, Dulaimi, AF, Sadique, M, Al Nageim, H, Al-Kafaji, M and Al-Yasari, R (2022) Developing a sustainable, post treated, half warm mix asphalt for structural surface layer. Construction and Building Materials, 342 (PartA). p. 127926. ISSN 0950-0618

Ancele, Y, Ha, MH, Lersteau, C, Matellini, DB and Nguyen, TT (2021) Toward a more flexible VRP with pickup and delivery allowing consolidations. Transportation Research Part C: Emerging Technologies, 128. ISSN 0968-090X

Andredaki, M, Georgoulas, A and Marengo, M (2020) Numerical investigation of quasi-sessile droplet absorption into wound dressing capillaries. Physics of Fluids, 32 (9). ISSN 1070-6631

Andredaki, M, Georgoulas, A, Miche, N and Marengo, M (2021) Numerical investigation of liquid film instabilities and evaporation in confined oscillating slug-plug flows. Wit Transactions on Engineering Sciences, 123 (12). pp. 127-138. ISSN 1746-4471

Angel, O (2023) Quasi-Static Fracture Behaviour of AISI 304L and CA6NM. Doctoral thesis, Liverpool John Moores University.

Angel, O, Rothwell, G, English, R, Ren, J and Cummings, A (2022) Effect of post processing of digital image correlation on obtaining accurate true stress-strain data for AISI 304L. Nuclear Engineering and Technology, 54 (9). pp. 3205-3214. ISSN 1738-5733

Anthony Xavior, M, Ashwath, P, Batako, A, Jeyapandiarajan, P, Joel, J and Anbalagan, A (2023) Processing and characterization of aluminium alloy 6061 graphene composite printed by direct metal laser sintering. Materials Today: Proceedings. ISSN 2214-7853

Antunes, A, Faria, P, Silva, V and Brás, A (2019) Rice husk-earth based composites: A novel bio-based panel for buildings refurbishment. Construction and Building Materials, 221. pp. 99-108. ISSN 0950-0618

Arab, M, Faramarz, MG and Hashim, KS (2022) Applications of Computational and Statistical Models for Optimizing the Electrochemical Removal of Cephalexin Antibiotic from Water. Water, 14 (3). ISSN 2073-4441

Armin, M, Day, S, Karimirad, M and Khorasanchi, M (2021) On the development of a nonlinear time-domain numerical method for describing vortex-induced vibration and wake interference of two cylinders using experimental results. Nonlinear Dynamics, 104. pp. 3517-3531. ISSN 0924-090X

Arokiasamy, P, Abdullah, MMAB, Abd Rahim, SZ, Sadique, M, Ming, LY, Mohd Salleh, MAA, Mohd Arif Zainol, MRR and Ghazali, CMR (2022) Diverse material based geopolymer towards heavy metals removal: A review. Journal of Materials Research and Technology, 22. pp. 126-156. ISSN 2238-7854

Ashkanfar, A, English, R and Rothwell, G (2015) A computational approach to fretting wear prediction at the head-stem taper junction of total hip replacements. Wear, 338/39. pp. 210-220. ISSN 1873-2577

Ashkanfar, A, Toh, SMS, English, R, Langton, DJ and Joyce, TJ (2024) The impact of femoral head size on the wear evolution at contacting surfaces of total hip prostheses: A finite element analysis. Journal of the Mechanical Behavior of Biomedical Materials, 153. pp. 1-8. ISSN 1751-6161

Ashwath, P, Venkatraman, M, Patel, A, Xavior, MA and Batako, A (2024) Innovation in Sustainable composite research: Investigating Graphene-Reinforced MMCs for Liquid Hydrogen Storage Tanks in Aerospace and space exploration. Journal of Materials Research and Technology, 33. pp. 4313-4331. ISSN 2238-7854

Ashwath, P, Xavior, MA and Batako, ADL (2021) Processing, Characterization, and Properties of alpha-Al2O3-AA2900 Composites for Aerospace Brake Pad Applications. JOM Journal of the Minerals, Metals and Materials Society, 73 (12). pp. 4365-4375. ISSN 1047-4838

Ashwath, P, Xavior, MA, Batako, ADL, Jeyapandiarajan, P and Joel, J (2022) Selective laser melting of Al–Si–10Mg alloy: microstructural studies and mechanical properties assessment. Journal of Materials Research and Technology, 17. pp. 2249-2258. ISSN 2238-7854

Ashwath, P, Xavior, MA, Rajendran, R, Batako, ADL, Jeyapandiarajan, P and Joel, J (2022) Microwave-assisted T6 heat treating of aluminium alloy-Al2O3 nanocomposites. MRS Communications, 12 (2). pp. 245-249. ISSN 2159-6859

Ashworth, S (2021) The evolution of facility management (FM) in the building information modelling (BIM) process: An opportunity to use critical success factors (CSF) for optimising built assets. Doctoral thesis, Liverpool John Moores University.

Asteris, PG, Rizal, FIM, Koopialipoor, M, Roussis, PC, Ferentinou, M, Armaghani, DJ and Gordan, B (2022) Slope Stability Classification under Seismic Conditions Using Several Tree-Based Intelligent Techniques. Applied Sciences, 12 (3). ISSN 2076-3417

Asuelimen, G, Blanco-Davis, E, Wang, J, Yang, Z and Matellini, DB (2020) Formal Safety Assessment of a Marine Seismic Survey Vessel Operation, Incorporating Risk Matrix and Fault Tree Analysis. Journal of Marine Science and Application. ISSN 1671-9433

Asuquo, MP, Wang, J, Phylip-Jones, G and Riahi, R (2019) Condition monitoring of marine and offshore machinery using evidential reasoning techniques. Journal of Marine Engineering and Technology. ISSN 2046-4177

Ateeq, M and Al-Shamma'a, A (2017) Experimental study on the Microwave processing of waste tyre rubber aggregates to enhance their surface properties for their use in rubberised bituminous mixtures. Microwave and Optical Technology Letters, 59 (12). pp. 2951-2960. ISSN 0895-2477

Atherton, W (2008) An empirical investigation of catastrophic and partial failures of bulk storage vessels and subsequent bund wall overtopping and dynamic pressures. Doctoral thesis, Liverpool John Moores University.

Aufa, A.N., Hassan, MZ, Ismail, Z, Harun, N, Ren, J and Sadali, MF (2022) Surface Enhancement in Ti-6al-4v Fabricated by Selective Laser Melting on Bone-Like Apatite Formation. Journal of Materials Research and Technology, 19. pp. 4108-4030. ISSN 2238-7854

Aw, J, Zhao, H, Norbury, A, Li, L, Rothwell, G and Ren, XJ (2015) Effects of Poisson's ratio on the deformation of thin membrane structures under indentation. PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS, 252 (7). pp. 1526-1532. ISSN 0370-1972

Azree Othuman Mydin, M, Hamah Sor, N, Bahrami, A, Dulaimi, A, Onuralp Özkılıç, Y, Althoey, F, Jagadesh, P, Isleem, HF and Tawfik, TA (2024) Residual durability, mechanical, and microstructural properties of foamed concrete subjected to various elevated temperatures. Engineering Science and Technology, an International Journal, 55.

B

Baaki, TK, Baharum, MR, Pitt, M and Davies, S (2022) Associated factors of medical waste management practices in developing countries: a review. International Journal of Environment and Waste Management. ISSN 1478-9868

Bahlekeh, A, Mohammed, HI, Al-Azzawi, WK, Dulaimi, A, Majdi, HS, Talebizadehsardari, P and Mahdi, JM (2022) CFD analysis on optimizing the annular fin parameters toward an improved storage response in a triple-tube containment system. Energy Science and Engineering. ISSN 2050-0505

Baines-Jones, V A (2010) Nozzle Design for Improved Useful Fluid Flow in Grinding. Doctoral thesis, Liverpool John Moores University.

Baishya, K (2019) Through-Life Monitoring of the impact of vibration on the reliability of area array packages using Non- Destructive Testing. Doctoral thesis, Liverpool John Moores University.

Baishya, K, Harvey, DM, Zhang, G and Braden, DR (2020) Investigation into how the floor plan layout of a manufactured PCB influences flip-chip susceptibility to vibration. IEEE Transactions on Components, Packaging and Manufacturing Technology, 10 (5). pp. 741-748. ISSN 2156-3950

Baker, JL, Barker, T and Gray, JMNT (2015) A two-dimensional depth-averaged μ(I)-rheology for dense granular avalanches. Journal of Fluid Mechanics, 787. pp. 367-395. ISSN 0022-1120

Baker, JL and Einav, I (2021) Deep velocimetry: Extracting full velocity distributions from projected images of flowing media. Experiments in Fluids, 62 (5). ISSN 0723-4864

Baker, JL, Johnson, CG and Gray, JMNT (2016) Segregation-induced finger formation in granular free-surface flows. Journal of Fluid Mechanics, 809. pp. 168-212. ISSN 0022-1120

Banyte, J (2020) A Framework Development to Facilitate the Effective Management of a Sustainable Commercial Property Market. Doctoral thesis, Liverpool John Moores University.

Barrlett, Z, Han, L, Nguyen, TT and Johnson, P (2019) A Novel Online Dynamic Temporal Context Neural Network Framework for the Prediction of Road Traffic Flow. IEEE Access, 7. ISSN 2169-3536

Bashir, M (2018) Seismic Analysis of a 10 MW Offshore Wind Turbine With a Monopile. In: Proceedings of The 7th Asia Conference on Earthquake Engineering . (7th Asia Conference on Earthquake Engineering, 22-25th November 2018, Bangkok, Thailand).

Bashir, M, Xu, Z, Wang, J and Soares, C (2022) Data-Driven Damage Quantification of Floating Offshore Wind Turbine Platforms Based on Multi-Scale Encoder–Decoder with Self-Attention Mechanism. Journal of Marine Science and Engineering, 10 (12). ISSN 2077-1312

Baskar, A, Xavior, MA, Jeyapandiarajan, P, Batako, A and Burduk, A (2024) A novel two-phase trigonometric algorithm for solving global optimization problems. Annals of Operations Research. ISSN 0254-5330

Batakliev, T, Ivanov, E, Georgiev, V, Angelov, V, Ahuir-Torres, JI, Harvey, DM and Kotsilkova, R (2024) New Insights in the Nanomechanical Study of Carbon-Containing Nanocomposite Materials Based on High-Density Polyethylene. Applied Sciences, 14 (21).

Batako, A Dynamic FEA analysis of the Super Lightweight External cryogenic fuel tank (SLWT) made of Aluminium alloy 2195 - graphene nano composite for launch vehicle aerospace application. Journal of Composites Science. ISSN 2504-477X (Accepted)

Batako, A (2023) Experimental Investigation into the Effect of Magnetorheological Fluid Damper on Vibration and Chatter in Straight Turning Process. Journal of Manufacturing Processes, 99. pp. 825-847. ISSN 1526-6125

Batako, A (2024) An experimental investigation into the enhancement of surface quality of Inconel 718 through axial ultrasonic vibration assisted grinding in Dry and MQL environments. Journal of Manufacturing and Materials Processing, 8 (6). ISSN 2504-4494

Batako, ADL and Tsiakoumis, V (2015) An experimental investigation into resonance dry grinding of hardened steel and nickel alloys with element of MQL. International Journal of Advanced Manufacturing Technology, 77 (1). pp. 27-41. ISSN 0268-3768

Bayraktar, M and Yüksel, O (2023) Investigation of the effect of anti-fouling systems on meeting energy efficiency regulations. Marine Science and Technology Bulletin, 12 (2). pp. 172-181.

Bayraktar, M, Yüksel, O and Göksu, B (2023) Classification of Ship Propeller Types and Energy-Saving Devices Under Technology Developments. Turkish Journal of Maritime and Marine Sciences, 9 (2). pp. 82-96.

Beckett, CTS, Addo, IA, O-N, F, Yakubu, I, Gulen, Y, Ukwizagira, O, Huang, Y, Gagnon, AS and Armada Bras, AM (2024) Strength and durability of biostabilised Ghanaian mud bricks. In: Proceedings of the Second RILEM International Conference on Earthen Construction , 52. pp. 132-141. (ICEC2024: The Second RILEM International Conference on Earthen Construction, 8-10th July 2024, Edinburgh).

Benabbou, R, Hui, Y, Roberts, EE and Shao, JJ (2022) Reinventing the Image of Cities Using the Element of Water International Case Studies of Waterfront Urban Developments. In: WIT Transactions on Ecology and the Environment , 13 (260). pp. 365-377. (SUSTAINABLE CITY 2022, Rome, Italy).

Bezombes, F (2004) Fibre Bragg grating temperature sensors for high-speed machining applications. Doctoral thesis, Liverpool John Moores University.

Bin Ali, S, Kamaris, GS and Gkantou, M (2022) Flexural behaviour of concrete-filled double skin aluminium alloy tubes. Engineering Structures, 272. ISSN 0141-0296

Bin Ali, S, Kamaris, GS and Gkantou, M (2022) Flexural buckling behaviour of concrete-filled double skin aluminium alloy columns. Engineering Structures, 275 (Part B). ISSN 0141-0296

Bochenska, A, Kot, P, Muradov, M, Markiewicz, J, Zawieska, D, Hess, M and Antoniou, A (2023) Critical evaluation of cultural heritage architectural standard documentation methods across different European countries. In: International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives , XLVIII. pp. 251-258. (29th International CIPA Symposium: Documenting, Understanding, Preserving Cultural Heritage: Humanities and Digital technologies for Shaping the Future, Florence).

Bock, M, Gkantou, M, Theofanous, M, Afshan, S and Yuan, H (2023) Ultimate behaviour of hybrid stainless steel cross-sections. Journal of Constructional Steel Research, 210. ISSN 0143-974X

Bolbot, V, Gkerekos, C, Theotokatos, G and Boulougouris, E (2022) Automatic traffic scenarios generation for autonomous ships collision avoidance system testing. Ocean Engineering, 254. ISSN 0029-8018

Bolbot, V, Theotokatos, G, Hamann, R, Psarros, G and Boulougouris, E (2021) Dynamic Blackout Probability Monitoring System for Cruise Ship Power Plants. Energies, 14 (20). ISSN 1996-1073

Bolbot, V, Theotokatos, G and Wennersberg, LA (2022) A method to identify and rank objects and hazardous interactions affecting autonomous ships navigation. Journal of Navigation, 75 (3). pp. 572-593. ISSN 0373-4633

Bonnin, N (2021) Emerging remote sensing technologies and population genetic analyses for chimpanzee conservation in Tanzania. Doctoral thesis, Liverpool John Moores University.

Bouchard, DJ, Andredaki, M, Georgoulas, A, Marengo, M and Chandra, S (2022) Penetration characteristics of a liquid droplet impacting on a narrow gap: Experimental and numerical analysis. Physics of Fluids, 34 (5). ISSN 1070-6631

Braden, D R (2012) Non-destructive evaluation of solder joint reliability. Doctoral thesis, Liverpool John Moores University.

Brady, L (2023) Challenges in decarbonising space heating in the UK. In: ASC Proceedings 2023 . pp. 52-59. (Associated Schools of Construction 59th ASC Conference, Liverpool John Moores University).

Brady, LJ and Lowe, J (2014) Engineering Defects – Costs and Sustainability. In: CIBSE website . (CIBSE ASHRAE Technical Symposium, 2014, 3rd - 4th April 2014, Dublin, Ireland).

Brooks, M, Abdellatif, M and Alkhaddar, R (2021) Application of life cycle carbon assessment for a sustainable building design: a case study in the UK. International Journal of Green Energy. ISSN 1543-5075

Brown, J (2021) Designing, Implementing, and Testing Hardware for Cybersecurity. Doctoral thesis, Liverpool John Moores University.

Brown, J, Tok, KH, Gao, R, Ji, Z, Zhang, W, Marsland, JS, Chiarella, T, Franco, J, Kaczer, B, Linten, D and Zhang, JF (2023) A Pragmatic Model to Predict Future Device Aging. IEEE Access, 11. pp. 127725-127736. ISSN 2169-3536

Brun, M, Colquitt, DJ, Jones, IS, Movchan, AB and Movchan, NV (2014) Transformation cloaking and radial approximations for flexural waves in elastic plates. NEW JOURNAL OF PHYSICS, 16. pp. 1-22. ISSN 1367-2630

Brás, A, Goncalves, F and Faustino, P (2013) Cork-based mortars for thermal bridges correction in a dwelling: Thermal performance and cost evaluation. Energy and Buildings, 72. pp. 296-308. ISSN 0378-7788

Brás, A, Leal, M and Faria, P (2013) Cement-cork mortars for thermal bridges correction. Comparison with cement-EPS mortars performance. Construction and Building Materials, 49. pp. 315-327. ISSN 0950-0618

Brás, A, Rocha, A and Faustino, P (2015) Integrated approach for school buildings rehabilitation in a Portuguese city and analysis of suitable third party financing solutions in EU. Journal of Building Engineering, 3. pp. 79-93. ISSN 2352-7102

Brás, A, Valença, A and Faria, P (2016) Performance-based methods for masonry building rehabilitation using innovative leaching and hygrothermal risk analyses. Sustainable Cities and Society, 28. pp. 321-331. ISSN 2210-6707

Brás, A, Van Der Bergh, JM, Mohammed, H and Nakouti, I (2021) Design Service Life of RC Structures with Self-Healing Behaviour to Increase Infrastructure Carbon Savings. Materials, 14 (12). ISSN 1996-1944

Brás, A, Yakubu, I, Mohammed, H, Idowu, IA, Jones, R, Gagnon, A, Owusu-Nimo, F, Huang, Y, Beckett, CTS and Addo, IA (2024) Bio-stabilising earthen houses with tannins from locally available resources. Case Studies in Construction Materials, 20. ISSN 2214-5095

Burduk, A, Musiał, K, Balashov, A, Batako, A and Safonyk, A (2022) Solving scheduling problems with integrated online sustainability observation using heuristic optimization. Bulletin of the Polish Academy of Sciences: Technical Sciences, 70 (6). pp. 1-9. ISSN 0239-7528

Burgess, A, Dodd, R, Radwani, M, Opoz, TT and Tammas-Williams, S (2022) The properties of stainless steel 17-4PH produced by a low cost additive manufacturing technique, the Marforged MetalX. Journal of Physics : Conference Series, 2198 (1). 012065-012065. ISSN 1742-6588

Burke, C, McWhirter, PR, Veitch-Michaelis, J, McAree, O, Pointon, HAG, Wich, SA and Longmore, SN (2019) Requirements and Limitations of Thermal Drones for Effective Search and Rescue in Marine and Coastal Areas. Drones, 3/4. ISSN 2504-446X

Bury, A (2022) A teaching tool for regulating students' thinking when troubleshooting under pressure. In: Liverpool John Moores University’s Students at the Heart Conference. . (Liverpool John Moores University’s Students at the Heart Conference., Liverpool, UK).

Butdee, S, Srikhumsuk, P, Phuangsalee, P, Burduk, A, Xavior, MA and Batako, ADL (2024) Multilevel modelling of sustainable consumption for achieving carbon neutral production – case study of the urban in Thailand. Journal of Achievements in Materials and Manufacturing Engineering, 124 (2). pp. 65-77. ISSN 1734-8412

C

Cai, L, Li, W, Li, H, Zhou, B, He, L, Guo, W and Yang, Z (2024) Incorporation of energy-consumption optimization into multi-objective and robust port multi-equipment integrated scheduling. Transportation Research Part C: Emerging Technologies, 166. p. 1. ISSN 0968-090X

Cao, H, Chen, X, Li, H and Shen, C (2022) Frictional behaviour of the microstructural surfaces created by cylindrical grinding processes. Applied Sciences. ISSN 2076-3417

Cao, W, Wang, X, Li, J, Zhang, Z, Cao, Y and Feng, Y (2024) A novel integrated method for heterogeneity analysis of marine accidents involving different ship types. Ocean Engineering, 312. ISSN 0029-8018

Cao, Y, Iulia, M, Majumdar, A, Feng, Y, Xin, X, Wang, X, Wang, H and Yang, Z (2024) Investigation of the risk influential factors of maritime accidents: A novel topology and robustness analytical framework. Reliability Engineering and System Safety, 254. ISSN 0951-8320

Cao, Y, Wang, T, Zhang, X, Kaiwartya, O, Hashem Eiza, M and Putrus, G (2018) Toward Anycasting-Driven Reservation System for Electric Vehicle Battery Switch Service. IEEE Systems Journal, 13 (1). pp. 906-917. ISSN 1932-8184

Cao, Y, Wang, X, Wang, Y, Fan, S, Wang, H, Yang, Z, Liu, Z, Wang, J and Shi, R (2023) Analysis of factors affecting the severity of marine accidents using a data-driven Bayesian network. Ocean Engineering, 269. ISSN 0029-8018

Carnacina, I, Leonardi, N and Pagliara, S (2019) Characteristics of Flow Structure around Cylindrical Bridge Piers in Pressure-Flow Conditions. Water, 11 (11). ISSN 2073-4441

Carta, G, Brun, M, Movchan, AB, Movchan, NV and Jones, IS (2014) Dispersion properties of vortex-type monatomic lattices. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 51 (11-12). pp. 2213-2225. ISSN 0020-7683

Carta, G, Colquitt, DJ, Movchan, AB, Movchan, NV and Jones, IS (2020) Chiral flexural waves in structured plates: Directional localisation and control. Journal of the Mechanics and Physics of Solids, 137. ISSN 0022-5096

Carta, G, Jones, IS, Movchan, NV and Movchan, AB (2019) Wave polarization and dynamic degeneracy in a chiral elastic lattice. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 475 (2232). ISSN 1364-5021

Carta, G, Jones, IS, Movchan, NV, Movchan, AB and Nieves, MJ (2017) “Deflecting elastic prism” and unidirectional localisation for waves in chiral elastic systems. Scientific Reports, 7. ISSN 2045-2322

Carta, G, Jones, IS, Movchan, NV, Movchan, AB and Nieves, MJ (2017) Gyro-elastic beams for the vibration reduction of long flexural systems. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 473 (2203). ISSN 1364-5021

Carta, G, Nieves, MJ, Jones, IS, Movchan, NV and Movchan, AB (2019) Flexural vibration systems with gyroscopic spinners. Philosophical Transactions A: Mathematical, Physical and Engineering Sciences, 377 (2156). ISSN 1364-503X

Cebasek, TM, Esen, AF, Woodward, PK, Laghrouche, O and Connolly, DP (2018) Full scale laboratory testing of ballast and concrete slab tracks under phased cyclic loading. Transportation Geotechnics, 17 (A). pp. 33-40. ISSN 2214-3912

Cervone, A and Dordevic, O (2021) Maximum torque per ampere algorithm for five-phase synchronous reluctance machines. IEEE Transactions on Industrial Electronics. ISSN 0278-0046

Chabuk, A, Hammood, ZA, Abed, SA, Kadhim, MMA, Hashim, KS, Al-Ansari, N and Laue, J (2021) Noise Level in Textile Industries: Case Study Al-Hillah Textile Factory-Company for Textile Industries, Al-Hillah-Babylon-Iraq. In: IOP Conference Series: Earth and Environmental Science , 790 (1). (First International Virtual Conference on Environment & Natural Resources, 24-25 March 2021, University of Al-Qadisiyah, Iraq).

Chadee, A, Hernandez, SR and Martin, H (2021) The influence of optimism bias on time and cost on construction projects. Emerging Science Journal, 5 (4). pp. 429-442. ISSN 2610-9182

Chadee, AA, Chadee, XT, Mwasha, A and Martin, HH (2021) Implications of 'Lock-in' on Public Sector Project Management in a Small Island Development State. Buildings, 11 (5).

Chai, Z, Freitas, P, Zhang, WD, Hatem, F, Degraeve, R, Clima, S, Zhang, J, Marsland, J, Fantini, A, Garbin, D, Goux, L and Kar, G (2020) Stochastic computing based on volatile GeSe ovonic threshold switching selectors. IEEE Electron Device Letters. ISSN 0741-3106

Chai, Z, Freitas, P, Zhang, WD, Zhang, JF and Marsland, J (2021) True Random Number Generator Based on Switching Probability of Volatile Gexse1-X Ovonic Threshold Switching Selectors. In: IEEE Explore . (2021 IEEE 14th International Conference on ASIC, 26 October 2021 - 29 October 2021, Kunming, China).

Chai, Z, Zhang, W and Zhang, JF (2024) Stochastic Computing Based on Volatile Ovonic Threshold Switching Devices. In: Proceedings of IEEE 15th International Conference on ASIC (ASICON) , 15 (2023). pp. 1-4. (IEEE 15th International Conference on ASIC, 24-27 October 2023, Nanjing, China).

Chai, Z, Zhang, WD, Clima, S, Hatem, F, Degraeve, R, Diao, Q, Zhang, JF, Freitas, P, Marsland, J, Fantini, A, Garbin, D, Goux, L and Kar, G (2021) Cycling induced metastable degradation in GeSe Ovonic threshold switching selector. IEEE Electron Device Letters, 42 (10). pp. 1148-1451. ISSN 0741-3106

Chandler Crnigoj, S (2020) Proposing Factors Towards a Standardised Testing Environment for Binaural and 3D Sound Systems. Doctoral thesis, Liverpool John Moores University.

Chandrasekar, R, Gkantou, M, Nikitas, G, Hashim, KS, Pradeep, HR and Ahuja, A (2022) Integration of 3D Concrete Printing in the Construction Industry: A Short Review. In: Current Trends in Geotechnical Engineering and Construction . pp. 445-452. (International Conference on Geotechnical Engineering, Baghdad, Iraq).

Chang, C-H, Kontovas, CA, Yu, Q and Yang, Z (2020) Risk assessment of the operations of maritime autonomous surface ships. Reliability Engineering and System Safety, 207. ISSN 0951-8320

Chang, C-H, Lin, C-C, Yang, Z and Kontovas, C (2024) Evaluating the social acceptance of autonomous ferries: An observation from passengers’ boarding willingness. Transport Policy, 159. pp. 83-94. ISSN 0967-070X

Charkoutsis, S and Kara-Mohamed, M (2023) A Particle Swarm Optimization tuned nonlinear PID controller with improved performance and robustness for First Order Plus Time Delay systems. Results in Control and Optimization, 12. ISSN 2666-7207

Chen, C, Ma, F, Xu, X, Chen, Y and Wang, J (2021) A novel ship collision avoidance awareness approach for cooperating ships using multi-agent deep reinforcement learning. Journal of Marine Science and Engineering, 9 (10). ISSN 2077-1312

Chen, H, Gao, X, Li, H and Yang, Z (2023) A framework for the optimal deployment of police drones based on street-level crime risk. Applied Geography, 162. ISSN 0143-6228

Chen, H, Huang, S, Niu, D, Gao, Y and Zhang, Z (2024) Fatigue characterization and assessment methods for the terminal blend crumb rubber/SBS composite modified asphalt binders. Construction and Building Materials, 430. ISSN 0950-0618

Chen, J, Dan, H, Ding, Y, Gao, Y, Guo, M, Guo, S, Han, B, Hong, B, Hou, Y, Hu, C, Hu, J, Huyan, J, Jiang, J, Jiang, W, Li, C, Liu, P, Liu, Y, Liu, Z, Lu, G, Ouyang, J et al, Qu, X, Ren, D, Wang, C, Wang, C, Wang, D, Wang, D, Wang, H, Wang, H, Xiao, Y, Xing, C, Xu, H, Yan, Y, Yang, X, You, L, You, Z, Yu, B, Yu, H, Yu, H, Zhang, H, Zhang, J, Zhou, C, Zhou, C and Zhu, X (2021) New innovations in pavement materials and engineering: A review on pavement engineering research 2021. Journal of Traffic and Transportation Engineering (English Edition), 8 (6). pp. 815-999. ISSN 2095-7564

Chen, J, Xing, X, Wang, Y, Zhou, Y, Ren, X, Yang, Y and Yang, Q (2015) Effects of Vanadium Addition on Microstructure and Tribological Performance of Bainite Hardfacing Coatings. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 24 (3). pp. 1157-1164. ISSN 1059-9495

Chen, PS-L, Fan, H, Enshaei, H, Zhang, W, Shi, W, Abdussamie, N, Miwa, T, Qu, Z and Yang, Z (2024) Opportunities and Challenges of Hydrogen Ports: An Empirical Study in Australia and Japan. Hydrogen, 5 (3). pp. 436-458.

Chen, PSL, Fan, H, Enshaei, H, Zhang, W, Shi, W, Abdussamie, N, Miwa, T, Qu, Z and Yang, Z (2023) A review on ports’ readiness to facilitate international hydrogen trade. International Journal of Hydrogen Energy, 48 (46). pp. 17351-17369. ISSN 0360-3199 (Accepted)

Chen, Q, Zhang, J, Gao, J, Lau, YY, Liu, J, Poo, MCP and Zhang, P (2024) Risk Analysis of Pirate Attacks on Southeast Asian Ships Based on Bayesian Networks. Journal of Marine Science and Engineering, 12 (7).

Chen, X, Cao, H and Li, H (2018) Dressing Strategy and Grinding Control for Cylindrical Microstructural Surface. International Journal of Advanced Manufacturing Technology, 99. pp. 707-727. ISSN 0268-3768

Chen, X, Chi, Y and Li, H (2016) In-process monitoring and analysis of bearing outer race way grinding based on the power signal. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231 (14). pp. 2622-2634. ISSN 2041-2975

Chen, X and Opoz, TT (2016) Effect of different parameters on grinding efficiency and its monitoring by acoustic emission. Production & Manufacturing Research, 4 (1). ISSN 2169-3277

Chen, X, Opoz, TT and Oluwajobi, A (2017) Analysis of grinding surface creation by single grit approach. Journal of Manufacturing Science and Engineering, 139 (12). ISSN 1528-8935

Chen, X and Wharton, J Functional microstructural surface manufacturing and assessment. In: 5th International Conference of Bionic Engineering (ICBE'16), 21st-24th June 2016, Ningbo, China. (Unpublished)

Chen, X, Xu, S, Ahuir-Torres, JI, Wang, Z, Chen, X, Yu, T and Zhao, J (2023) Acceleration mechanism of abrasive particle in ultrasonic polishing under synergistic physical vibration and cavitation: Numerical study. Ultrasonics Sonochemistry, 101. ISSN 1350-4177

Chen, Y, Chen, X, AIOuarab, L, Opoz, TT, Xu, XP and Yu, G (2019) Morphology Analysis and Characteristics Evaluation of Typical Super Abrasive Grits in Micron Scale. Journal of Superhard Materials, 41 (3). pp. 189-200. ISSN 1063-4576

Chen, Y, Chen, X, Xu, X and Yu, G (2018) Quantitative impacts of regenerative vibration and abrasive wheel eccentricity on surface grinding dynamic performance. International Journal of Advanced Manufacturing Technology, 96. pp. 2271-2283. ISSN 0268-3768

Chen, Y, Fan, Y, Zhang, G, Wang, Q, Li, S, Wang, Z and Dong, M (2024) Speckle noise suppression of reconstructed image in digital holography based on BM3D improved convolutional neural network. Applied Optics, 63 (22). pp. 6000-6011. ISSN 1559-128X

Chen, Y, Gai, J, He, S, Li, H, Cheng, C and Zou, W (2024) MPC-TD3 Trajectory Tracking Control for Electrically Driven Unmanned Tracked Vehicles. ELECTRONICS, 13 (18).

Chen, Y, Quan, M, Wang, D, Du, H, Hu, L, Zhao, Y, Guo, M and Liu, Y (2022) Optimization and comparison of multiple solar energy systems for public sanitation service buildings in Tibet. Energy Conversion and Management, 267. ISSN 0196-8904

Chen, Y, Shen, H, Zhang, G, Dong, M and Wan, X (2024) Identification of weld defects from ultrasonic signals using GASF and an improved DCGAN-ResNet network. Nondestructive Testing and Evaluation. pp. 1-27. ISSN 1058-9759

Chen, Y, Wang, Q, Zhang, G, Li, P, Fan, Y, Wang, Z and Dong, M (2024) Phase unwrapping in digital holography based on SRDU-net. Optics Communications, 573. ISSN 0030-4018

Chidlow, SJ, Chong, WWF and Teodorescu, M (2013) On the two-dimensional solution of both adhesive and non-adhesive contact problems involving functionally graded materials. European Journal of Mechanics A - Solids, 39. pp. 86-103. ISSN 0997-7538

Chidlow, SJ and Teodorescu, M (2014) Sliding contact problems involving inhomogeneous materials comprising a coating-transition layer-substrate and a rigid punch. International journal of Solids and Structures, 51 (10). pp. 1931-1945. ISSN 0020-7683

Chidlow, SJ and Teodorescu, M (2013) Two-dimensional contact mechanics problems involving inhomogeneously elastic solids split into three distinct layers. International Journal of Engineering Science, 70. pp. 102-123. ISSN 0020-7225

Chidlow, SJ, Teodorescu, M and Vaughan, ND (2011) Predicting the deflection and sub-surface stress field within two-dimensional inhomogeneously elastic bonded layered solids under pressure. International journal of Solids and Structures, 48 (22-23). pp. 3243-3256. ISSN 0020-7683

Chidlow, SJ, Teodorescu, M and Vaughan, ND (2012) A solution method for the sub-surface stresses and local deflection of a semi-infinite inhomogeneous elastic medium. Applied Mathmatical Modelling, 36 (8). pp. 3486-3501. ISSN 0307-904X

Ching-Pong Poo, M, Yang, Z and Lau, YY (2023) Vulnerability analysis of cruise shipping in ASEAN countries facing COVID-19 pandemic. Ocean & Coastal Management, 248. ISSN 0964-5691

Chippagiri, R, Biswal, D, Mandavgane, S, Brás, A and Ralegaonkar, RV (2023) Life Cycle Assessment of a Sustainable Prefabricated Housing System: A Cradle-to-Site Approach Based on a Small-Scale Experimental Model. Buildings, 13 (4).

Chippagiri, R, Bras, A and Ralegaonkar, RV (2022) Development of sustainable prefabricated housing system by small-scale experimental model. Proceedings of the Institution of Civil Engineers: Engineering Sustainability. pp. 1-14. ISSN 1478-4629

Chippagiri, R, Brás, A, Sharma, D and Ralegaonkar, RV (2022) Technological and Sustainable Perception on the Advancements of Prefabrication in Construction Industry. Energies, 15 (20). ISSN 1996-1073

Chippagiri, R, Gavali, H, Ralegaonkar, R, Riley, ML, Shaw, A and Armada Bras, AM (2021) Application of Sustainable Prefabricated Wall Technology for Energy Efficient Social Housing. Sustainability, 13 (3). ISSN 2071-1050

Chippagiri, R, Gavali, HR, Ralegaonkar, RV and Armada Bras, A (2022) Performance Evaluation of a Sustainable Prefabricated System Using Small-Scale Experimental Model Technique. Buildings, 12 (11).

Choi, J, Jeong, B, Theotokatos, G and Tezdogan, T (2022) Approach an autonomous vessel as a single robot with Robot Operating System in virtual environment. Journal of International Maritime Safety, Environmental Affairs, and Shipping, 6 (1). pp. 50-66. ISSN 2572-5084

Chukwuka, O (2023) Risk Analysis of Emergency Supply Chains. Doctoral thesis, Liverpool John Moores University.

Chukwuka, OJ, Ren, J, Wang, J and Paraskevadakis, D (2024) Managing risk in emergency supply chains–An empirical study. International Journal of Logistics Research and Applications. pp. 1-37. ISSN 1367-5567

Chung, R Y M (1992) Non-contact surface inspection. Doctoral thesis, Liverpool John Moores University (formerly Liverpool Polytechnic).

Colquitt, DJ, Brun, M, Gei, M, Movchan, AB, Movchan, NV and Jones, IS (2014) Transformation elastodynamics and cloaking for flexural waves. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 72. pp. 131-143. ISSN 0022-5096

Colquitt, DJ, Jones, IS, Movchan, NV, Movchan, AB, Brun, M and McPhedran, RC (2013) Making waves round a structured cloak: lattices, negative refraction and fringes. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 469 (2157). ISSN 1364-5021

Cotgrave, A and Wilson, HK (2020) Learning Space Design: The presentation of a framework for the Built Environment Discipline. International Journal of Construction Education and Research, 16 (2). pp. 132-148. ISSN 1522-8150

Cotterill, J, Ethaib, S, Hashim, KS, Alqashou, F, Al-Hayawi, AY, Abdellatif, M, Gkantou, M and Shubbar, AAF (2021) Evaluation of the Use of Lignocellusic Biomass in Thermal Insulation for Green Building. IOP Conference Series: Materials Science and Engineering, 1058 (1). ISSN 1757-8981

Couch, C and Fowles, S (2018) Metropolitan Planning and the Phenomenon of Reurbanisation: The Example of Liverpool. Planning Practice & Research, 34 (2). pp. 184-205. ISSN 0269-7459

Cui, R, Liu, Z, Wang, X, Yang, Z, Fan, S and Shu, Y (2022) The impact of marine engine noise exposure on seafarer fatigue: A China case. Ocean Engineering, 266 (3). ISSN 0029-8018

Cutler, J (2024) Performance Evaluation of a Combined Floating Offshore Energy System (CFOES) in Operational and Extreme Conditions. Doctoral thesis, Liverpool John Moores University (LJMU).

Cutler, J, Bashir, M, Yang, Y, Wang, J and Loughney, S (2021) Assessment of Dynamic Responses of 5 Mw Floating Offshore Wind Turbine Platforms in Intermediate Water Depth. In: CORE 2021 Conference Proceedings . (5th International Conference on Offshore Renewable Energy, 26th-27th August 2021, Virtual Event).

Cutler, J, Bashir, M, Yang, Y, Wang, J and Loughney, S (2022) Preliminary development of a novel catamaran floating offshore wind turbine platform and assessment of dynamic behaviours for intermediate water depth application. Ocean Engineering, 258. ISSN 0029-8018

Cárdenas Miranda, A, Dahlhaus, J, Dordevic, O, Eckhardt, J, Faessler, V, Le-Peuvedic, J-M, Riley, PH and Wasner, J (2023) LiBAT: A High-Performance AC Battery System for Transport Applications. Designs, 7 (3). p. 74.

D

Davies, FN, Sadique, MM and Amoako-Attah, J (2023) Investigating effective building fabric as a passive cooling technique to combat overheating in UK residential buildings. Engineering Future Sustainability, 1 (2). ISSN 2753-4693

Deb, P, Debnath, B, Hasan, M, Alqarni, AS, Alaskar, A, Alsabhan, AH, Khan, MA, Alam, S and Hashim, KS (2022) Development of Eco-Friendly Concrete Mix Using Recycled Aggregates: Structural Performance and Pore Feature Study Using Image Analysis. Materials (Basel, Switzerland), 15 (8). ISSN 1996-1944

Demir, T, Bryde, DJ, Fearon, DJ and Ochieng, EG (2015) Three dimensional stakeholder analysis - 3dSA: adding the risk dimension for stakeholder analysis. International Journal of Project Organisation and Management, 1 (7). pp. 15-30. ISSN 1740-2905

Demokri Dizji, P, Joudaki, S and Kolivand, H (2022) A New Traffic Sign Recognition Technique Taking Shuffled Frog-Leaping Algorithm into Account. Wireless Personal Communications. pp. 1-17. ISSN 0929-6212

Deng, W (2015) Cantilever Dynamic Analysis in Tapping Mode Atomic Force Microscopy. Doctoral thesis, Liverpool John Moores University.

Diaz De Rienzo, MA, Aguirre, M, Martin, P and Galicia, M (2018) Influence of microbial adherence on corrosion of UNS 1008 carbon steel and hybrid nano-structured coatings. Anti-Corrosion Methods and Materials, 65 (2). pp. 152-157. ISSN 0003-5599

Dithmer, P, Reinhardt, L and Kontovas, CA (2017) The Liner Shipping Routing and Scheduling Problem Under Environmental Considerations: The Case of Emission Control Areas. In: Computational Logistics, ICCL 2017 , 10572. pp. 336-350. (8th International Conference on Computational Logistics (ICCL), 18th - 20th September 2017, Southampton, ENGLAND).

Dixit, S, Mandal, SN, Sawhney, A and Singh, S (2017) Area of linkage between lean construction and sustainability in indian construction industry. International Journal of Civil Engineering and Technology, 8 (8). ISSN 0976-6308

Dixit, S, Mandal, SN, Sawhney, A and Singh, S (2017) Relationship between skill development and productivity in construction sector: A literature review. International Journal of Civil Engineering and Technology, 8 (8). pp. 649-665. ISSN 0976-6308

Dowson, J, Unterhitzenberger, C and Bryde, DJ (2024) Facilitating and improving learning in projects: Evidence from a lean approach. International Journal of Project Management, 42 (1). ISSN 0263-7863

Du, H, Zhao, Y and Ge, X (2020) Innovative Design of Traffic Equipment Based on Future Trend Prediction. Solid State Technology, 63 (2). pp. 1609-1618. ISSN 0038-111X

Du, Y, Shao, W, Chai, Z, Zhao, H, Diao, Q, Gao, Y, Yuan, X, Wang, Q, Li, T, Zhang, WD, Zhang, JF and Min, T (2022) Synaptic 1/f noise injection for overfitting suppression in hardware neural networks. Neuromorphic Computing and Engineering, 2.

Dudek, M, Rosowski, A, Koperkiewicz, A, Grobelny, J, Wach, R, Sharp, MC, French, PW, Janasz, L and Kozanecki, M (2017) Carbon nanoparticles fabricated by infrared laser ablation of graphite and polycrystalline diamond targets. Physica Status Solidi (A) Applications and Materials Science, 214 (2). ISSN 1862-6300

Dudek, M, Rosowski, A, Kozanecki, M, Jaszczak, M, Szymański, W, Sharp, MC and Karczemska, A (2020) Microstructures Manufactured in Diamond by Use of Laser Micromachining. Materials, 13 (5). ISSN 1996-1944

Dulaimi, A, Al Busaltan, S, Mydin, MAO, Lu, D, Özkılıç, YO, Jaya, RP and Ameen, A (2023) Innovative geopolymer-based cold asphalt emulsion mixture as eco-friendly material. Scientific Reports, 13 (1). pp. 1-14. ISSN 2045-2322

Dulaimi, A, Qaidi, S, Al-Busaltan, S, Milad, A, Sadique, M, Kadhim, MA, Al-Khafaji, R and Sabri Sabri, MM (2023) Application of paper sludge ash and incinerated sewage ash in emulsified asphalt cold mixtures. Frontiers in Materials, 9.

Dulaimi, AF, Al-Busaltan, S, Kadhim, MA, Al-Khafaji, R, Sadique, MM, Al Nageim, H, Ibrahem, RK, Awrejcewicz, J, Pawłowski, W and Mahdi, JM (2022) A Sustainable Cold Mix Asphalt Mixture Comprising Paper Sludge Ash and Cement Kiln Dust. Sustainability, 14 (16).

Dulaimi, AF, Al-Busaltan, S and Sadique, MM (2021) The development of a novel, microwave assisted, half-warm mixed asphalt. Construction and Building Materials, 301. ISSN 0950-0618

Dulanjalee, E, Guillard, F, Baker, J, Einav, I and Marks, B (2020) Measuring grain size fractions of bidisperse granular materials using X-ray radiography. Optics Express, 28 (20). pp. 29202-29211. ISSN 1094-4087

Durrans, D, Lee, D and Sadique, M (2022) Application of concrete encased ecobrick blocks in the UK’s construction industry. Kufa Journal of Engineering, 13 (4). pp. 70-89. ISSN 2071-5528

Dursun, O, Durmuslar, F and Olmez, D The Influence of Immediate Urban Surroundings on Energy Performance of Historical Buildings. In: 56th Annual Associated Schools of Construction International Conference, 01 October 2020 - 03 October 2020, Liverpool John Moores University (Postponed). (Accepted)

Díaz, H, Loughney, S, Wang, J and Guedes Soares, C (2022) Comparison of multicriteria analysis techniques for decision making on floating offshore wind farms site selection. Ocean Engineering, 248. ISSN 0029-8018

de Kooker, LC, Ferentinou, M, Musonda, I and Esmaeili, K (2024) Investigation of the stability of a fly ash pond facility using 2D and 3D slope stability analysis. Mining, Metallurgy & Exploration, 41 (2). pp. 659-668. ISSN 2524-3462

E

EDIRISINGHE, VRD (2023) Framework for improved alternatives dispute resolution practice in the Sri Lankan constructions industry. Doctoral thesis, Liverpool John Moores University.

Ebrahimnataj Tiji, M, Mohammed, HI, Ibrahem, RK, Dulaimi, A, Mahdi, JM, Sh. Majdi, H, Keshtkar, MM and Talebizadehsardari, P (2022) Evaluation of T-Shaped Fins With a Novel Layout for Improved Melting in a Triple-Tube Heat Storage System. Frontiers in Energy Research, 10.

Ehiagwina, A (2021) Application of Mixed Simulation Method to Modelling Port Traffic. Doctoral thesis, Liverpool John Moores University.

El-Hajaji, AHS (2018) DESALINATION TECHNOLOGIES AND ENVIRONMENTAL ASPECTS: CASE STUDY IN LIBYA. Doctoral thesis, Liverpool John Moores University.

Emad, W, Mohammed, As, Brás, A, Asteris, Pg, Kurda, R, Muhammed, Z, Hassan, AMT, Qaidi, SMA and Sihag, P (2022) Metamodel techniques to estimate the compressive strength of UHPFRC using various mix proportions and a high range of curing temperatures. Construction and Building Materials, 349. ISSN 0950-0618

Emami, M, Rezaei, S, Valaei, N and Gardener, J (2022) Creativity mindset as the organizational capability: the role of creativity-relevant processes, domain-relevant skills and intrinsic task motivation. Asia-Pacific Journal of Business Administration. ISSN 1757-4323

Emamjomeh, M, Kakavand, S, Jamali, H, Alizadeh, SM, Safdari, M, Mousavi, SES, Hashim, KS and Mousazadeh, M (2020) The treatment of printing and packaging wastewater by electrocoagulation– flotation: the simultaneous efficacy of critical parameters and economics. Desalination and Water Treatment, 205. ISSN 1944-3986

Emamjomeh, MM, Torabi, H, Mousazadeh, M, Alijani, MH and Gohari, F (2019) Impact of independent and non-independent parameters on various elements’ rejection by nanofiltration employed in groundwater treatment. Applied Water Science, 9. ISSN 2190-5487

Ender, J (2021) Design of Industrial Workplaces to relieve Workers when Interacting with Joint-Arm-Robots. Doctoral thesis, Liverpool John Moores University.

Esen, AF, Woodward, PK, Laghrouche, O, Cebasek, TM, Brennan, AJ, Robinson, S and Connolly, DP (2021) Full-Scale Laboratory Testing Of A Geosynthetically Reinforced Soil Railway Structure. Transportation Geotechnics, 28. ISSN 2214-3912

Eslami Majd, A, Adebayo, DS, Tchuenbou-Magaia, F, Willetts, J, Nwosu, D, Matthews, Z and Ekere, NN (2024) Wind Flow and Its Interaction with a Mobile Solar PV System Mounted on a Trailer. Sustainability, 16 (5).

Eslami Majd, A and Ekere, NN (2020) Crack initiation and growth in PV module interconnection. Solar Energy, 206. pp. 499-507. ISSN 0038-092X

Eslami Majd, A, Ekere, NN, Rahmati Darvazi, A and Amini Sedehi, A (2022) Creep-fatigue lifetime estimation of efficient photovoltaic module ribbon interconnections. Microelectronics Reliability, 139. ISSN 0026-2714

Eslami Majd, A, Jeong, IH, Jung, JP and Ekere, NN (2021) Cu Protrusion of Different through-Silicon via Shapes under Annealing Process. Journal of Materials Engineering and Performance, 30 (6). pp. 4712-4720. ISSN 1059-9495

Eslami Majd, A, Tchuenbou-Magaia, F, Meless, AM, Adebayo, DS and Ekere, NN (2023) A Review on Cooling Systems for Portable Energy Storage Units. Energies, 16 (18).

Eslami Mjad, A and Ekere, NN (2019) Numerical analysis on thermal crack initiation due to non-homogeneous solder coating on the round strip interconnection of photo-voltaic modules. Solar Energy, 194. pp. 649-655. ISSN 0038-092X

Esper, IDM, Smolkin, O, Manko, M, Popov, A, From, PJ and Mason, A (2022) Evaluation of RGB-D Multi-Camera Pose Estimation for 3D Reconstruction. Applied Sciences, 12 (9). ISSN 2076-3417

Ewad, HM (2016) Development of A closed Loop Control System for Vibration Assisted Grinding. Doctoral thesis, Liverpool John Moores University.

Ewuga, D and Adesi, M (2022) Integrating sustainability practices into the Irish construction supply chain: main contractors' perspective. Built Environment Project and Asset Management. ISSN 2044-124X

Ezcan, V and Goulding, JS (2022) Offsite Sustainability—Disentangling the Rhetoric through Informed Mindset Change. Sustainability, 14 (8). ISSN 2071-1050

F

Faisal, AAH, Al-Ridah, ZA, Al-Ansari, N, Hassan, WH, Al-Hashimi, O, Ghfar, AA and Hashim, K (2023) Controlling metal ion migration in contaminated groundwater with Iraqi clay barriers for water resource protection. RSC Advances, 13 (24). pp. 16196-16205. ISSN 2046-2069

Faisal, AAH, Alkhateeb, RW, Al-Hashimi, OA, Shubbar, AAF and Saleh, B (2021) Removal of zinc, lead and nickel from contaminated soil by electro-kinetic technology under the influence of washing and buoyance forces with different purging solutions. Separation Science and Technology. ISSN 0149-6395

Faisal, AAH, Bedah, BJ and Al-Hashimi, O (2022) Constructed Wetland Units Filled with Waterworks Sludge for Remediating of Wastewater Contaminated with Congo Red Dye. Iraqi Journal of Chemical and Petroleum Engineering, 23 (2). pp. 9-17. ISSN 1997-4884

Faisal, AAH, Mokif, LA, Hassan, WH, AlZubaidi, R, Al Marri, S, Hashim, K, Khan, MA and Al-sareji, OJ (2024) Continuous and funnel-gate configurations of a permeable reactive barrier for reclamation of groundwater laden with tetracycline: experimental and simulation approaches. Scientific Reports, 14 (1).

Faisal, AAH, Nassir, ZS, Rashid, HM, Al-Hashimi, OA, Shubbar, AAF and Saleh, B (2022) Neural network for modeling the capture of lead and cadmium ions from wastewater using date palm stones. International Journal of Environmental Science and Technology. ISSN 1735-1472

Fan, S, Blanco-Davis, E, Fairclough, S, Zhang, J, Yan, X, Wang, J and Yang, Z (2023) Incorporation of seafarer psychological factors into maritime safety assessment. Ocean and Coastal Management, 237. ISSN 0964-5691

Fan, S and Yang, Z (2023) Accident data-driven human fatigue analysis in maritime transport using machine learning. Reliability Engineering & System Safety, 241. ISSN 0951-8320

Fan, S and Yang, Z (2023) Analysing seafarer competencies in a dynamic human-machine system. Ocean and Coastal Management, 240. ISSN 0964-5691

Fan, S and Yang, Z (2022) Safety and security co-analysis in transport systems: Current state and regulatory development. Transportation Research Part A: Policy and Practice, 166. pp. 369-388. ISSN 0965-8564

Fan, S and Yang, Z (2023) Towards objective human performance measurement for maritime safety: A new psychophysiological data-driven machine learning method. Reliability Engineering and System Safety, 233. ISSN 0951-8320

Fan, S, Yang, Z, Blanco-Davis, E, Zhang, J and Yan, X (2020) Analysis of maritime transport accidents using Bayesian networks. Proceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability. ISSN 1748-006X

Fan, S, Yang, Z, Wang, J and Marsland, J (2022) Shipping accident analysis in restricted waters: Lesson from the Suez Canal blockage in 2021. Ocean Engineering, 266 (5). ISSN 0029-8018

Fang, S, Liu, Z, Jiang, Y, Cao, Y, Wang, X and Wang, H (2023) Analysis of Human Competitive Behavior on an Inclined Ship. Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, 10 (1).

Fang, S, Liu, Z, Wang, X, Cao, Y and Yang, Z (2024) Dynamic analysis of emergency evacuation in a rolling passenger ship using a two-layer social force model. Expert Systems with Applications, 247. ISSN 0957-4174

Fang, S, Liu, Z, Wang, X, Matellini, B, Wang, J, Yang, Z, Zhang, X, Wan, B and Ni, S (2024) Experimental study on human evacuation onboard passenger ships considering heeling angle and opposite directions. Ocean Engineering, 308. ISSN 0029-8018

Fang, S, Liu, Z, Wang, X, Wang, J and Yang, Z (2022) Simulation of evacuation in an inclined passenger vessel based on an improved social force model. Safety Science, 148. p. 105675. ISSN 0925-7535

Farhan, S, Akef, V, Antón, D, Hashim, KS and Zubaidi, S (2021) Factors influencing the transformation of Iraqi holy cities: the case of Al-Najaf. Przegląd Naukowy Inżynieria i Kształtowanie Środowiska, 30 (2). pp. 365-375. ISSN 1732-9353

Faustino, P, Brás, A, Gonçalves, F and Nunes, Â (2017) Probabilistic service life of RC structures under carbonation. Magazine of Concrete Research, 69 (6). pp. 280-291. ISSN 0024-9831

Faustino, P, Brás, A and Ripper, T (2013) Corrosion inhibitors' effect on design service life of RC structures. Construction and Building Materials, 53. pp. 360-369. ISSN 0950-0618

Faustino, P, Chastre, C, Nunes, Â and Brás, A (2016) Lifetime modelling of chloride-induced corrosion in concrete structures with Portland and blended cements. Structure and Infrastructure Engineering, 12 (9). pp. 1013-1023. ISSN 1573-2479

Faustino, P, Gonçalves, F, Brás, A and Nunes, Â (2017) Lifetime Prediction of Reinforced Concrete Structures in Carbonation Environments Carbonation Modelling Vs Air Permeability Modelling. Journal of Civil Engineering and Management, 23 (2). pp. 283-291. ISSN 1392-3730

Feau, C, Politopoulos, I, Kamaris, GS, Mathey, C, Chaudat, T and Nahas, G (2014) Experimental and numerical investigation of the earthquake response of crane bridges. Engineering Structures, 84. pp. 89-101. ISSN 0141-0296

Feng, J, Matthews, C, Zheng, S, Yu, F and Gao, D (2015) Hierarchical Control Strategy for Active Hydropneumatic Suspension Vehicles Based on Genetic Algorithms. ADVANCES IN MECHANICAL ENGINEERING, 7 (2). pp. 1-10. ISSN 1687-8132

Feng, Y, Liu, Z, Jiang, Z, Xia, G, Cao, Y, Wang, X and Wang, H (2023) Analysis of factors affecting ship collisions based on association rule mining and complex network theory. Dalian Haishi Daxue Xuebao/Journal of Dalian Maritime University, 49 (3). pp. 31-44. ISSN 1006-7736

Feng, Y, Wang, X, Chen, Q, Yang, Z, Wang, J, Li, H, Xia, G and Liu, Z (2024) Prediction of the severity of marine accidents using improved machine learning. Transportation Research Part E: Logistics and Transportation Review, 188. ISSN 1366-5545

Feng, Y, Wang, X, Luan, J, Wang, H, Li, H, Li, H, Liu, Z and Yang, Z (2024) A novel method for ship carbon emissions prediction under the influence of emergency events. Transportation Research Part C: Emerging Technologies, 165. ISSN 0968-090X

Fergus, P, Hussain, A, Al-Jumeily, D, Huang, D and Bouguila, N (2017) Classification of Caesarean Section and Normal Vaginal Deliveries Using Foetal Heart Rate Signals and Advanced Machine Learning Algorithms. BioMedical Engineering OnLine, 16 (89). ISSN 1475-925X

Finlay, J P (2004) Numerical methods for the stress analysis of pipe-work junctions. Doctoral thesis, Liverpool John Moores University.

Ford, JL, Loughney, S, Blanco-Davis, E, Shahrokhi, A, Calder, J, Ogilvie, D and MacEachern, E (2021) Benchmarking and Compliance in the UK Offshore Decommissioning Hazardous Waste Stream. In: Proceedings of the 31st European Safety and Reliability Conference (ESREL 2021) . pp. 2555-2561. (Proceedings of the 31st European Safety and Reliability Conference, 19 September 2021 - 23 September 2021, Angers, France).

Frau, I (2020) Microwave and functional materials: a novel strategy for detecting toxic metals in polluted freshwater. Doctoral thesis, Liverpool John Moores University.

Frau, I, Wylie, S, Byrne, P, Onnis, P, Cullen, J, Mason, A and Korostynska, O (2021) Microwave sensors for in situ monitoring of trace metals in polluted water. Sensors, 21 (9). p. 3147. ISSN 1424-8220

Frau, I, Wylie, S, Byrne, PA, Cullen, J, Korostynska, O and Mason, A (2019) Detection of Zn in water using novel functionalised planar microwave sensors. Materials Science and Engineering: B, 247. ISSN 0921-5107

Freitas, P, Zhang, WD, Chai, Z, Zhang, JF and Marsland, J (2020) Impact of RTN and Variability on RRAM-Based Neural Network. In: 2020 IEEE 15th International Conference on Solid-State & Integrated Circuit Technology (ICSICT) . (IEEE 15th International Conference on Solid-State and Integrated-Circuit Technology, 03 November 2020 - 06 November 2020, Kunming, China).

French, PW, Rosowski, A, Murphy, MF, Irving, M and Sharp, MC (2015) Laser Induced Micro Plasma Processing of Polymer Substrates for Biomedical Implant Applications. In: Proceedings of the SPIE, Industrial Laser Applications Symposium (ILAS 2015) , 9657. (4th Industrial Laser Applications Symposium (ILAS), 17th - 18th March 2015, Kenilworth, ENGLAND).

G

Gand, AK, Sharif, S, Saidani, M, Lumor, R, Fom, PB, Yeboah, D and Ogbologugo, U (2019) Performance of lightweight granulated glass concrete beams reinforced with basalt FRP bars. Engineering Solid Mechanics, 7 (3). pp. 247-262. ISSN 2291-8744

Gand, AK, Yeboah, D, Khorami, M, Olubanwo, AO and Lumor, R (2018) Behaviour of strengthened timber beams using near surface mounted Basalt Fibre Reinforced Polymer (BFRP) rebars. Engineering Solid Mechanics, 6 (4). pp. 341-352. ISSN 2291-8744

Gao, R, Ma, J, Lin, X, Zhang, X, En, Y, Lu, G, Huang, Y, Ji, Z, Yang, H, Zhang, WD and Zhang, JF (2021) A Comparative Study of AC Positive Bias Temperature Instability of Germanium nMOSFETs with GeO2/Ge and Si-cap/Ge Gate Stack. IEEE Journal of the Electron Devices Society, 9. pp. 539-544. ISSN 2168-6734

Gao, R, Manut, AB, Ji, Z, Ma, J, Duan, M, Zhang, JF, Franco, J, Hatta, SFWM, Zhang, WD, Kaczer, B, Vigar, D, Linten, D and Groeseneken, G (2017) Reliable time exponents for long term prediction of negative bias temperature instability by extrapolation. IEEE Transactions on Industrial Electronics, 64 (4). pp. 1467-1473. ISSN 0278-0046

Gao, Y, Liu, X, Ren, S, Assaf, EI, Liu, P and Zhang, Y (2024) Nanostructure and damage characterisation of bitumen under a low cycle strain-controlled fatigue load based on molecular simulations and rheological measurements. Composites Part B: Engineering, 275. ISSN 1359-8368

Gao, Y, Liu, X, Ren, S, Li, Y and Zhang, Y (2023) Role of Surface Roughness in Surface Energy Calculation of Aggregate Minerals. Transportation Research Record, 2678 (1). pp. 190-201. ISSN 0361-1981

Gao, Y, Zhang, Y, Zhang, C, Liu, X and Jing, R (2022) Quantifying oxygen diffusion in bitumen films using molecular dynamics simulations. Construction and Building Materials, 331. ISSN 0950-0618

Garcia, MD and Amoako-Attah, J (2023) Energy performance analysis and assessment of retrofit renewable energy technology for a university building. Engineering Future Sustainability, 1 (2). ISSN 2753-4693

García Plaza, E, Chen, X and Ait Ouarab, L (2019) Abrasive Feature Related Acoustic Emission in Grinding. 2019 25th International Conference on Automation and Computing (ICAC).

García Plaza, E, Chen, X and Ait Ouarab, L (2020) Grinding Acoustic Emission Features in Relation to Abrasive Scratch Characteristics. International Journal of Abrasive Technology, 10 (2). pp. 134-154. ISSN 1752-2641

Gayretli, B, Shanthar, R, Opoz, TT and Abeykoon, C (2024) Mechanical Properties of LDPE and PS Polymer Matrix Composites Reinforced with GNP and CF — A Critical Review. International Journal of Lightweight Materials and Manufacture, 7 (4). pp. 572-596. ISSN 2588-8404

Gbako, S (2024) River-Sea Freight Transport in Major Logistic Gateways: A Performance Evaluation of The United Kingdom And Continental Europe’s Inland Waterways. Doctoral thesis, Liverpool John Moores University.

Gbako, S, Paraskevadakis, D, Ren, J, Wang, J and Radmilovic, Z (2024) A systematic literature review of technological developments and challenges for inland waterways freight transport in intermodal supply chain management. Benchmarking: An International Journal. ISSN 1463-5771

Gdeisat, M, Burton, DR, Lilley, F and Arevalillo-Herraez, M (2016) Fast fringe pattern phase demodulation using FIR Hilbert transformers. OPTICS COMMUNICATIONS, 359. pp. 200-206. ISSN 0030-4018

Gdeisat, MA, Burton, DR, Lilley, F, Arevalillo-Herraez, M, Abushakra, A and Qaddoura, M (2016) Shifting of wrapped phase maps in the frequency domain using a rational number. Measurement Science and Technology, 27 (10). ISSN 0957-0233

Gdeisat, MA, Burton, DR, Lilley, F, Arevalillo-Herraez, M and Ammous, MMM (2015) Aiding phase unwrapping by increasing the number of residues in two-dimensional wrapped-phase distributions. APPLIED OPTICS, 54 (34). pp. 10073-10078. ISSN 1559-128X

Ge, X, Jiao, L, Qu, J and Guo, FB (2020) Sustainable Urban Regeneration Based on Industrial Heritage Conservation in Dalian, China. Test Engineering and Management, 83. pp. 19353-19359. ISSN 0193-4120

Ge, X, Qu, J and Guo, FB (2020) On Major Issues and Countermeasures of the Regeneration of Former Industrial Sites in China. In: Advances in Economics, Business and Management Research , 133. (3rd International Conference on Advances in Management Science and Engineering (IC-AMSE 2020), 12-13 January 2020, Wuhan, China).

Ge, X, Qu, J and Zhan, X (2020) A Review of the Indicators for Assessing the Sustainability of Urban Regeneration. In: 2020 Annual Conference on Big Data, IoT, Engineering Management (BDIEM) . (2020 Annual Conference on Big Data, IoT, Engineering Management (BDIEM), 27 July 2020 - 29 July 2020, Shenyang, China).

Georgantzia, E (2022) Structural Response and Design of Aluminium Alloy Members. Doctoral thesis, Liverpool John Moores University.

Georgantzia, E, Ali, SB, Gkantou, M, Kamaris, GS, Kot, P and Hashim, K (2022) Numerical modelling of concrete-filled aluminium alloy 6082-T6 columns under axial compression. Journal of Physics: Conference Series, 2198 (1). 012045-012045. ISSN 1742-6588

Georgantzia, E, Bin Ali, S, Gkantou, M, Kamaris, GS, Kansara, KD and Atherton, W (2021) Flexural buckling performance of concrete-filled aluminium alloy tubular columns. Engineering Structures, 242 (1). ISSN 0141-0296

Georgantzia, E and Gkantou, M (2021) Flexural Buckling of Concrete-Filled Aluminium Alloy CHS Columns: Numerical Modelling and Design. In: Lecture Notes in Civil Engineering , 143. pp. 697-707. (3rd International Conference on Trends and Recent Advances in Civil Engineering, Noida, India).

Georgantzia, E, Gkantou, M and Kamaris, GS (2022) Aluminium alloy channel columns: Testing, numerical modelling and design. Thin-Walled Structures, 182 (A). ISSN 0263-8231

Georgantzia, E, Gkantou, M and Kamaris, GS (2021) Aluminium alloys as structural material: A review of research. Engineering Structures, 227. ISSN 0141-0296

Georgantzia, E, Gkantou, M and Kamaris, GS (2021) Numerical Modelling and Design of Aluminium Alloy Angles under Uniform Compression. CivilEng, 2 (3). pp. 632-651. ISSN 2673-4109

Georgantzia, E, Gkantou, M, Kamaris, GS and Kansara, KD (2022) Design of aluminium alloy channel sections under minor axis bending. Thin-Walled Structures, 174. ISSN 0263-8231

Georgantzia, E, Gkantou, M, Kamaris, GS and Kansara, KD (2022) Ultimate response and plastic design of aluminium alloy continuous beams. Structures, 39. pp. 175-193. ISSN 2352-0124

Georgantzia, E, Nikolaidis, T, Katakalos, K, Tsikaloudaki, K and Iliadis, T (2022) Dynamic Performance Analysis by Laboratory Tests of a Sustainable Prefabricated Composite Structural Wall System. Energies, 15 (9).

Georgoulas, A, Andredaki, M and Marengo, M (2017) An Enhanced VOF Method Coupled with Heat Transfer and Phase Change to Characterise Bubble Detachment in Saturated Pool Boiling. Energies, 10 (3).

Gkantou, M, Bock, M and Theofanous, M (2021) Design of stainless steel cross-sections with outstand elements under stress gradients. Journal of Constructional Steel Research, 179. ISSN 0143-974X

Gkantou, M, Georgantzia, E, Kadhim, A, Kamaris, GS and Sadique, M (2023) Geopolymer concrete-filled aluminium alloy tubular cross-sections. Structures, 51. pp. 528-543. ISSN 2352-0124

Gkantou, M, Kokosis, G, Theofanous, M and Dirar, S (2018) Plastic design of stainless steel continuous beams. Journal of Constructional Steel Research. ISSN 0143-974X

Gkantou, M, Martinez-Vazquez, P and Baniotopoulos, C (2017) On the structural response of a tall hybrid onshore wind turbine tower. In: Procedia Engineering , 199. pp. 3200-3205. (10th International Conference on Structural Dynamics (EURODYN), 10 September 2017 - 13 September 2017, Sapienza Univ Rome, Fac Civil & Ind Engn, Rome, ITALY).

Gkantou, M, Theofanous, M, Antoniou, N and Baniotopoulos, C (2017) Compressive behaviour of high-strength steel cross-sections. Proceedings of the Institution of Civil Engineers - Structures and Buildings, 170 (11). pp. 813-824. ISSN 0965-0911

Gkantou, M, Theofanous, M and Baniotopoulos, C (2019) A NUMERICAL STUDY OF PRESTRESSED HIGH STRENGTH STEEL TUBULAR MEMBERS. Frontiers of Structural and Civil Engineering. ISSN 2095-2430

Gkantou, M, Theofanous, M and Baniotopoulos, P (2018) Plastic design of hot-finished high strength steel continuous beams. Thin-Walled Structures, 133. pp. 85-95. ISSN 0263-8231

Gkantou, M, Theofanous, M, Wang, J, Baniotopoulos, C and Gardner, L (2017) Behaviour and design of high-strength steel cross-sections under combined loading. Proceedings of the Institution of Civil Engineers - Structures and Buildings, 170 (11). pp. 841-854. ISSN 0965-0911

Gkantou, M, Tziavos, NI, Dirar, S, Theofanous, M, Ukpedor, OP and Foster, A (2024) Assessment of design models for aluminium alloy CHS beam-columns with stocky cross-sections. Structures, 65.

Goh, CT (2014) DEVELOPMENT OF LASER MICRO-FABRICATED SURFACES TO ACCELERATE & ENHANCE ENDOTHELIAL CELL ADHESION AND PROLIFERATION. Doctoral thesis, Liverpool John Moores University.

Gong, Y, Chang, CH, Lee, PTW, Yin, J and Shi, W (2024) Unveiling the mystery of the responsiveness of inbound tourism to economic policy uncertainty: New evidence from Australia. Tourism Economics. pp. 1-22. ISSN 1354-8166

González, VG, Ruiz, GR, Du, H, Sánchez-Ostiz, A and Bandera, CF (2022) Weather Files for the Calibration of Building Energy Models. Applied Sciences, 12 (15). p. 7361.

González-Kunz, RN, Pineda, P, Brás, A and Morillas, L (2017) Plant biomass ashes in cement-based building materials. Feasibility as eco-efficient structural mortars and grouts. Sustainable Cities and Society, 31. pp. 151-172. ISSN 2210-6707

Grindley, J (2024) An optical communication system to assist docking of autonomous underwater vehicles. Doctoral thesis, Liverpool John Moores University.

Grindley, J, McAree, O, Ateeq, M, Abdullah, B and Bezombes, F (2020) Towards Software Based Optical Communication Methods for the Assistance of Docking Autonomous Underwater Vehicles. Electronics, 9 (4). ISSN 2079-9292

Grinnell, S (2018) The Social Health and Well-being Impacts Associated With Hydraulic Fracturing. Doctoral thesis, Liverpool John Moores University.

Grmasha, RA, Al-sareji, OJ, Meiczinger, M, Stenger-Kovács, C, Al-Juboori, RA, Jakab, M, Lengyel, E, Somogyi, V, Khan, MA and Hashim, KS (2024) A sustainable nano-hybrid system of laccase@M-MWCNTs for multifunctional PAHs and PhACs removal from water, wastewater, and lake water. Environmental Research, 246. ISSN 0013-9351

Grmasha, RA, Stenger-Kovács, C, Al-sareji, OJ, Al-Juboori, RA, Meiczinger, M, Andredaki, M, Idowu, IA, Majdi, HS, Hashim, K and Al-Ansari, N (2024) Temporal and spatial distribution of polycyclic aromatic hydrocarbons (PAHs) in the Danube River in Hungary. Scientific Reports, 14 (1). p. 8318. ISSN 2045-2322

Grmasha, RA, Stenger-Kovács, C, Bedewy, BAH, Al-sareji, OJ, Al-Juboori, RA, Meiczinger, M and Hashim, KS (2023) Ecological and human health risk assessment of polycyclic aromatic hydrocarbons (PAH) in Tigris river near the oil refineries in Iraq. Environmental Research, 227. ISSN 0013-9351

Gu, M, Wang, Z and Dordevic, O (2022) Analysis and Reduction of Current and Voltage Ripple in DC-Link for Three-Level NPC Inverter-Fed Dual Three-Phase Motor Drives. IEEE Transactions on Power Electronics, 38 (4). pp. 5128-5140. ISSN 0885-8993

Gu, Y, Li, Y and Shaw, A (2021) Development and performance of flexible temperature-sensing fabric. Journal of the Textile Institute. ISSN 0040-5000

Guo, FB Capturing Imagination: A Shift from Teaching to Learning. In: ICERI2017 . (10th International Coference of Education and Research and Innovation, 16 November 2017 - 18 November 2017, Seville, Spain). (Accepted)

Guo, FB (2021) Design Principle. LJMU.

Guo, FB (2021) Product Design and Presentation. LJMU.

Guo, FB, Roberts, EE, Zhan, X and Johnston, K (2021) Consideration of Human-Centered Emotional Design and Cultural Strategy in Urban Regeneration in China. Journal of Urban Design. ISSN 1357-4809

Guo, FB, Roberts, EE, Zhan, X and Johnston, K (2023) Driving renovation: A comparative research project in urban regeneration across cities in China. Journal of Urban Regeneration and Renewal, 17 (2). pp. 172-189. ISSN 1752-9638

Guo, FB, Yang, Z, Blanco Davis, E, Khalique, A and Bury, A Does being Human cause human Errors? Consideration of Human-Centred Design in Ship bridge design. In: 12th International Conference on Applied Human Factors and Ergonomics (AHFE 2021), 25 July 2021 - 29 July 2021, New York, USA. (Accepted)

Guo, J, Feng, Y, Liu, L, Xing, X, Ren, X and Yang, Q (2016) Investigation of microstructural damage to eutectic carbides from scratch tests of a heat-treated Fe–Cr–W–Mo–V–C alloy. Wear, 358-35. pp. 137-147. ISSN 0043-1648

Guo, J, Feng, Y, Tang, C and Ren, X (2020) Intrinsic defects, Mo-related defects, and complexes in transition-metal carbide VC: A first-principles study. Journal of the American Ceramic Society, 103 (12). pp. 7226-7239. ISSN 0002-7820

Guo, J, Feng, Y, Tang, C, Wang, L, Qing, X, Yang, Q and Ren, X (2022) Insight into Point Defects and Complex Defects in β-Mo2C and Carbide Evolution from First Principles. Materials, 15 (13). p. 4719. ISSN 1996-1944

Guo, J, Liao, B, Liu, L, Gao, Y, Ren, X and Yang, Q (2015) Composition Optimization and Experimental Characterization of a Novel Steel Based on CALPHAD. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 24 (5). pp. 2099-2107. ISSN 1059-9495

Guo, J, Liu, S, Zhou, Y, Wang, J, Xing, X, Ren, X and Yang, Q (2016) Stability of eutectic carbide in Fe-Cr-Mo-W-V-C alloy. Materials Letters, 171. pp. 216-219. ISSN 0167-577X

Guo, Y, Jin, Y, Hu, S, Yang, Z, Xi, Y and Han, B (2022) Risk evolution analysis of ship pilotage operation by an integrated model of FRAM and DBN. Reliability Engineering & System Safety, 229. p. 108850. ISSN 0951-8320

Gurevin, B, Gulturk, F, Yildiz, M, Pehlivan, I, Nguyen, TT, Caliskan, F, Boru, B and Yildiz, MZ (2023) A Novel GUI Design for Comparison of ROS-Based Mobile Robot Local Planners. IEEE Access, 11. pp. 125738-125748. ISSN 2169-3536

Guruge, K, Waidyasekara, KGAS, Jayasena, HS and Manewa, RMAS (2024) Unveiling the potential of design for deconstruction in the circular economy. In: Proceedings of the 12th World Construction Symposium . pp. 1101-1111. (World Construction Symposium - 2024, 9th Aug - 10th Aug 2024, Taj Samudra, Colombo, Sri Lanka).

Guzowski, B, Rosowski, A, Lisik, Z, Jakubowska, M and Sharp, MC (2016) The integration of optical interconnections on ceramic substrates. Microelectronic Engineering, 157. pp. 19-23. ISSN 0167-9317

Göksu, B and Yüksel, O (2023) Impacts of the Form Design and Operational Factors on the Energy Consumption of a Solar-Powered Boat: A System Dynamics Approach. Turkish Journal of Maritime and Marine Sciences, 9 (2). pp. 66-81.

Göksu, B, Şakar, C and Yüksel, O (2024) A probabilistic assessment of ship blackout incident with Fault Tree Analysis into (FTA) Bayesian Network (BN). Journal of Marine Engineering & Technology. pp. 1-16. ISSN 2046-4177

H

Habib, AM, Ren, J, Matellini, B, Jenkinson, I and Paraskevadakis, D (2024) Critical factors to adopt sustainable agrifood supply chain management in developing countries: The case of Ethiopian coffee industry. Business Strategy and Development, 7 (4).

Hagendorf, O (2009) Simulation based parameter and structure optimisation of discrete event systems. Doctoral thesis, Liverpool John Moores University.

Hajalifard, Z, Mousazadeh, M, Khademi, S, Khademi, N, Jamadi, MH and Sillanpää, M (2023) The efficacious of AOP-based processes in concert with electrocoagulation in abatement of CECs from water/wastewater. npj Clean Water, 6 (1).

Hajivandi, J, Kaya, E, Edwards, G and Kurt, H (2021) Simulating topological robustness of Fano resonance in rotated Honeycomb photonic crystals. Photonics and Nanostructures - Fundamentals and Applications, 46. ISSN 1569-4410

Hamad, MA, Nasr, M, Shubbar, AAF, Al-Khafaji, Z, Al Masoodi, Z, Al-Hashimi, O, Kot, P, Al Khaddar, R and Hashim, KS (2021) Production of Ultra-High-Performance Concrete with Low Energy Consumption and Carbon Footprint Using Supplementary Cementitious Materials Instead of Silica Fume: A Review. Energies, 14 (24). ISSN 1996-1073

Hamidifar, H, Mohammad Ali Nezhadian, D and Carnacina, I (2022) Experimental study of debris-induced scour around a slotted bridge pier. Acta Geophysica. ISSN 1895-6572

Hamidifar, H, Zanganeh-Inaloo, F and Carnacina, I (2021) Hybrid scour depth prediction equations for reliable design of bridge piers. Water, 13 (15). ISSN 2073-4441

Han, S, Song, D, Shi, F, Du, H, Zhang, Y and Yang, M (2024) Assessing Neighbourhood Preference: An Evaluation of Environmental Features within Small-Scale Open Spaces. Land, 13 (4). pp. 1-24. ISSN 2073-445X

Han, S, Song, D, Xu, L, Ye, Y, Yan, S, Shi, F, Zhang, Y, Liu, X and Du, H (2022) Behaviour in public open spaces: A systematic review of studies with quantitative research methods. Building and Environment, 223. p. 109444. ISSN 0360-1323

Han, S, Ye, Y, Song, Y, Yan, S, Shi, F, Zhang, Y, Liu, X, Du, H and Song, D (2022) A Systematic Review of Objective Factors Influencing Behavior in Public Open Spaces. Frontiers in Public Health, 10. ISSN 2296-2565

Hanneghan, M (1998) An architecture to support virtual Concurrent Engineering. Doctoral thesis, Liverpool John Moores University.

Hanoon, DS, Sallal, AK, Shubbar, AAF, Al-Khafaji, ZS, Nasr, MS, Al-Mamoori, SF, Al-Fehaida, A, Abdulraheem, MS, Abdulzahra, FR, Alkhayyat, A, Al-Rifaie, A and Hashim, KS (2021) Early age assessment of cement mortar incorporated high volume fly ash. IOP Conference Series: Materials Science and Engineering, 1090 (1). ISSN 1757-8981

Hao, W, Bashir, M, Li, C and Sun, C (2021) Flow control for high-solidity vertical axis wind turbine based on adaptive flap. Energy Conversion and Management, 249. ISSN 0196-8904

Harrison, O, Reed-Jones, J, Morrison, K, Robinson, C and Jones, K (2023) The Effect of Noise Reduction Upon Voiceprint Integrity. In: ICISNA 23 Proceedings Book . pp. 211-213. (International Conference on Intelligent Systems and New Applications (ICISNA'23), Liverpool, UK).

Hart, P (2019) Design of an Original Methodology for the Efficient and Economic Appraisal of Existing and New Technologies in Form Grinding Processes including Helical. Masters thesis, Liverpool John Moores University.

Hartwell, J, Tucker, MP and Siriwardena, M (2018) Green buildings and well-being of employees in commercial spaces. In: Proceedings of The 7th World Construction Symposium 2018 . pp. 257-265. (7th World Construction Symposium: Built Asset Sustainability: Rethinking Design, Construction and Operations, 29 June 2018 - 01 July 2018, Colombo, Sri Lanka).

Hasan, MK, Ahsan, MS, Mamun, AA, Shah Newaz, SH and Lee, GM (2021) Human face detection techniques: A comprehensive review and future research directions. Electonics, 10 (19). ISSN 2079-9292

Hasan, MSU, Akhtar, N, Rai, AK, Khan, MA, Alfaisal, FM, Alharbi, RS and Hashim, KS (2024) Climatic teleconnection of the future trend of meteorological, GRACE-DSI, and vegetation-conditioned-based drought analysis in the Ganga Basin. Water Supply, 24 (8). pp. 2641-2669. ISSN 1606-9749

Hashim, KS, Al-Bugharbee, H, Zubaidi, S, AlBdairi, N, Farhan, S and Ethaib, S (2021) Updated Moving Forecasting Model of Air Maximum Temperature. In: IOP Conference Series : Earth and Environmental Science . (IOP Conference Series: Earth and Environmental Science,, 1st-2nd September 2021, Erbil, Iraq).

Hashim, KS, Al-Saati, NH, Alquzweeni, SS, Zubaidi, SL, Kot, P, Kraidi, L, Hussein, AH, Al Khaddar, RM, Shaw, A and Alwash, R (2019) Decolourization of dye solutions by electrocoagulation: an investigation of the effect of operational parameters. In: IOP Conference Series: Materials Science and Engineering (584). 012024. (The International Conference on Civil and Environmental Engineering Technologies (ICCEET), 23 April 2019 - 24 April 2019, University of Kufa, Iraq).

Hashim, KS, Alsaffar, AKK, Alkizwini, RS, Ali, AH, López-Maldonado, EA, Salman, JM, Alenezi, SM, Salmon, P, Abu Hasan, H and Al-Ansari, N (2023) Adsorption of fluoride on a green adsorbent derived from wastepaper: Kinetic, isotherm and characterisation study. Case Studies in Chemical and Environmental Engineering, 8. ISSN 2666-0164

Hashim, KS, Ewadh, HM, Muhsin, AA, Zubaidi, SL, Kot, P, Muradov, M, Aljefery, M and Al Khaddar, RM (2020) Phosphate removal from water using bottom ash: Adsorption performance, coexisting anions and modelling studies. Water Science and Technology. ISSN 0273-1223

Hashim, KS, Idowu, IO, Mustafina, J, Amoako-Attah, J, Nikitas, G and Al-Jumeily, D (2022) RSM (Response Surface Methodology) Modelling of Inter-Electrodes Spacing Effects on Phosphate Removal. In: 2021 14th International Conference on Developments in eSystems Engineering (DeSE) . pp. 586-589. (2021 14th International Conference on Developments in eSystems Engineering (DeSE), 07 December 2021 - 10 December 2021, Sharjah, UAE).

Hashim, KS, Kot, P, Zubaid, S, Alwash, R, Al Khaddar, RM, Shaw, A, Al-Jumeily, D and Aljefery, M (2019) Energy efficient electrocoagulation using baffle-plates electrodes for efficient Escherichia Coli removal from Wastewater. Journal of Water Process Engineering, 33. ISSN 2214-7144

Hashim, KS, Shaw, A, Al Khaddar, RM, Kot, P and Al-Shamma'a, A (2020) Water purification from metal ions in the presence of organic matter using electromagnetic radiation-assisted treatment. Journal of Cleaner Production, 280 (P2). ISSN 0959-6526

Haslinger, SG, Jones, IS, Movchan, NV and Movchan, AB (2018) Localization in semi-infinite herringbone waveguides. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 474 (2211). ISSN 1364-5021

Hassan, S, Kontovas, CA, Bashir, M and Wang, J (2022) A Decision-Support System for Assessing Cross-Country Pipeline Systems: Approach Based on Evidential Reasoning and Cost–Benefit Analysis. Journal of Pipeline Systems Engineering and Practice, 14 (1). ISSN 1949-1190

Hassan, S, Wang, J, Kontovas, CA and Bashir, M (2021) Modified FMEA hazard identification for cross-country petroleum pipeline using Fuzzy Rule Base and approximate reasoning. Journal of Loss Prevention in the Process Industries. ISSN 0950-4230

Hassan, S, Wang, J, Kontovas, CA and Bashir, M (2021) An assessment of causes and failure likelihood of cross-country pipelines under uncertainty using bayesian networks. Reliability Engineering and System Safety, 218. ISSN 0951-8320

Hatem, WA, Rashid, FL, Al-Obaidi, MA, Dulaimi, A and Mydin, MAO (2024) A bibliometric analysis and comprehensive review of magnetized water effects on concrete properties. Asian Journal of Civil Engineering. ISSN 1563-0854

Hawesah, HA, Sadique, MM, Harris, C, Al Nageim, H, Stopp, K and Pearl, H (2021) Polymer modified asphalt binder – an approach for enhancing temperature sensitivity for emergency pavement repair. International Journal of Pavement Engineering. ISSN 1029-8436

He, Y, Liu, J, Shao, W, Rao, L, Zhang, S, Ren, X and Yang, Q (2023) First-principles investigation on interface bonding properties between Fe3Cr3YC3 and γ-Fe. Materials Letters, 336. ISSN 0167-577X

He, Y, Wang, J, Zhu, T, Ren, X, Guo, J and Yang, Q (2024) Insights into refinement mechanism of primary M7C3 carbide by La2O3 via experiments and first-principles calculations. Journal of Materials Research and Technology, 29. pp. 4505-4513. ISSN 2238-7854

Heaton, R, Martin, H, Chadee, A, Milling, A, Dunne, S and Borthwick, F (2022) The Construction Materials Conundrum: Practical Solutions to Address Integrated Supply Chain Complexities. Journal of Construction Engineering and Management, 148 (8). ISSN 0733-9364

Hepple, R, Du, H, Feng, H, Shan, S and Yang, S (2023) Sustainability and carbon neutrality in UK's district heating: A review and analysis. e-Prime - Advances in Electrical Engineering, Electronics and Energy, 4. ISSN 2772-6711

Herez, M (2019) Development of a New High Performance Cold Mix Asphalt. Doctoral thesis, Liverpool John Moores University.

Herez, MH, Al Nageim, H, Richardson, J and Wright, S (2023) Development of a premium cold mix asphalt. Kufa Journal of Engineering, 14 (3). pp. 30-47. ISSN 2071-5528

Hernández-Nava, E, Mahoney, P, Smith, CJ, Donoghue, J, Todd, I and Tammas-Williams, S (2019) Additive manufacturing titanium components with isotropic or graded properties by hybrid electron beam melting/hot isostatic pressing powder processing. Scientific Reports, 9 (1). ISSN 2045-2322

Higgins, E, Taylor, MJ, Francis, H, Jones, M and Appleton, D (2014) The evolution of geographical information systems for fire prevention support. Fire Safety Journal, 69. pp. 117-125. ISSN 0379-7112

Holesovsky, MN, Pan, B, Morgan, MN and Czan, A (2018) Evaluation of Diamond Dressing Effect on Workpiece Surface Roughness by Way of Analysis of Variance. Tehnicki Vjesnik, 25 (1). pp. 165-169. ISSN 1330-3651

Horner, R (2020) Laser Surface Texturing To Create Biomimetic Surface Topographies For Marine Antifouling Efficacy Testing. Doctoral thesis, Liverpool John Moores University.

Horton, M, Connolly, DP and Yu, Z (2017) Rail trackbed and performance testing of stabilised sub-ballast in normal and high-speed environments. Procedia Engineering, 189. ISSN 1877-7058

Hu, J, Wang, Y, Wang, D, Du, H, Fan, J, Liu, Y and Sun, X (2023) Indices for dynamic evaluation of indoor humidity and thermal environment. Communications Engineering, 2 (1).

Hu, Z, Chai, Z, Zhang, W and Zhang, JF Switch-off mechanisms in GeAsTe Ovonic Threshold Switching Selector Device. In: 2024 IEEE 17th International Conference on Solid-State & Integrated Circuit Proceedings . (2024 IEEE 17th International Conference on Solid-State & Integrated Circuit, 22nd Oct - 25th Oct 2024, Zhuhai, China). (Accepted)

Hu, Z, Wang, G, Chai, Z, Zhang, W, Garbin, D, Degraeve, R, Clima, S, Ravsher, T, Fantini, A, Zhang, JF, Belmonte, A and Kar, G Understanding the Variability in GeAsTe Ovonic Threshold Switching Devices. In: 2024 International Electron Devices Meeting (IEDM) . (International Electron Device Meeting, 7th Dec - 11th Dec 2024, San Francisco, California, USA). (Accepted)

Huang, D, Hua, Y, Loughney, S, Blanco-Davis, E and Wang, J (2020) Lifespan cost analysis of alternatives to global sulphur emission limit with uncertainties. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment. ISSN 1475-0902

Huang, D, Loughney, S and Wang, J (2021) Identification of China's strategic transport passages in the context of the belt and road initiative. Maritime Policy and Management. ISSN 0308-8839

Huang, H, Liu, Q, Iglesias, G, Yue, M, Miao, W, Ye, Q, Li, C and Yang, T (2024) A fully-coupled analysis of the spar-type floating offshore wind turbine with bionic fractal heave plate under wind-wave excitation conditions. Renewable Energy, 232. ISSN 0960-1481

Huang, S, Chen, J, Li, W, Song, S, Li, X, Yu, H, Long, F, Chen, R, Bao, X, Chan, K and Lu, G (2023) Comparison of Volatile Compositions among Four Related Ligusticum chuanxiong Herbs by HS-SPME-GC-MS. Processes, 11 (1).

Hussein, AO, Ghayyib, RJ, Radi, FM, Jawad, ZF, Nasr, MS and Shubbar, A (2024) Recycling of Eggshell Powder and Wheat Straw Ash as Cement Replacement Materials in Mortar. Civil Engineering Journal, 10 (1). pp. 83-99. ISSN 2676-6957

Hussien, A, Abdeen Saleem, A, Mushtaha, E, Jannat, N, Al-Shammaa, A, Bin Ali, S, Assi, S and Al-Jumeily, D (2023) A statistical analysis of life cycle assessment for buildings and buildings’ refurbishment research. Ain Shams Engineering Journal, 14 (10). ISSN 2090-4479

Hussien, A, Khan, W, Hussain, A, Liatsis, P, Al-Shamma'a, A and Al-Jumeily, D (2023) Predicting energy performances of buildings' envelope wall materials via the random forest algorithm. Journal of Building Engineering, 69. ISSN 2352-7102

I

Idowu, IA, Hashim, KS, Shaw, A and Nunes, LJR (2021) Enhancing the fuel properties of beverage wastes as non-edible feedstock for biofuel production. Biofuels. ISSN 1759-7269

Idowu, IA, Ortoneda Pedrola, M, Wylie, S, Teng, KH, Kot, P, Phipps, D and Shaw, A (2019) Improving biodiesel yield of animal waste fats by combination of a pre-treatment technique and microwave technology Renewable Energy. Renewable Energy, 142. pp. 535-542. ISSN 1879-0682

Idowu, IO, Atherton, W, Hashim, KS, Kot, P, Al Khaddar, RM, Alo, B and Shaw, A (2019) An analyses of the status of landfill classification systems in developing countries: Sub Saharan Africa landfill experiences. Waste Management, 87. pp. 761-771. ISSN 0956-053X

Idowu, OK, Alabi, AO, Idowu, IA, Olusunmade, OI, Igbinoba, BA, Ajani, A, Habeebu, MYM, Igwilo, JU, Aramide, KO, Alabi, EO, Abdulkareem, FB, Eyesan, SU and Giwa, SO (2024) The impact of a communal multidisciplinary tumour board on medical education. ecancermedicalscience, 18.

Imjai, T, Kefyalew, F, Garcia, R, Kim, B, Brás, A and Sukontasukkul, P (2024) Performance of a novel structural insulated panel in tropical climates: Experimental and numerical studies. Construction and Building Materials, 421. ISSN 0950-0618

Irving, MD (2017) Evaluating the use of laser processing and polishing techniques to generate micro-patterned surfaces for controlling fibroblast cell behaviour. Doctoral thesis, Liverpool John Moores University.

Iseri, OK and Dursun, O (2022) The Impacts of Early Architectural Design Decisions on Building Performance. International Journal of Digital Innovation in the Built Environment, 11 (2). pp. 1-21. ISSN 2642-2263

Ishaya, B, Paraskevadakis, D, Bury, A and Bryde, D (2024) Problematizing socially sustainable global supply chains: Theoretical insights, contextual challenges, and the issue of modern slavery. International Studies of Management and Organization. pp. 1-28. ISSN 0020-8825

Ishola, A (2018) Advanced Safety Methodology for Risk Management of Petroleum Refinery Operations. Doctoral thesis, Liverpool John Moores University.

Ishola, A and Kontovas, CA (2022) Managing Ship’s Ballast Water: A Feasibility Assessment of Mobile Port-Based Treatment. Sustainability, 14 (22).

Islam, GMS, Sarker, S, Sadique, MM and Shubbar, AAF (2022) Non-Fired Building Blocks Using Industrial Wastes. Journal of Engineering Science, 12 (3). pp. 1-10. ISSN 2075-4914

Islam, GMS, Shubbar, AAF, Sarker, S and Sadique, MM (2022) Ternary combined industrial wastes for non-fired brick. Australian Journal of Structural Engineering. ISSN 1328-7982

J

Jabar, S, Baghbani Barenji, A, Franciosa, P, Kotadia, HR and Ceglarek, D (2023) Effects of the adjustable ring-mode laser on intermetallic formation and mechanical properties of steel to aluminium laser welded lap joints. Materials and Design, 227. ISSN 0264-1275

Jabar, S, Sun, T, Franciosa, P, Kotadia, HR, Ceglarek, D, Paolini, B and Faulhaber, R (2023) Effect of a ring-shaped laser beam on the weldability of aluminum-to-hilumin for battery tab connectors. In: Journal of Laser Applications , 35 (4). 042038-042038-11. (42nd Annual International Congress of Applications of Lasers & Electro-Optics (ICALEO) 2023, 16-19 October 2023, Chicago, Illinois. America).

Jabbar, DN, Al-Rifaie, A, Hussein, AM, Shubbar, AAF, Nasr, MS and Al-Khafaji, ZS (2021) Shear behaviour of reinforced concrete beams with small web openings. Materials Today: Proceedings. ISSN 2214-7853

Jackson, V and Boswell, F (2023) Perceptions of Men's Mental Health in the Workplace: A Case Study of Construction Workers in North-West England. UK Construction Blog.

Jafer, H, Jawad, I, Majeed, Z and Shubbar, A (2021) The development of an ecofriendly binder containing high volume of cement replacement by incorporating two by-product materials for the use in soil stabilization. Scientific Review Engineering and Environmental Sciences, 30 (1). pp. 62-74. ISSN 1732-9353

Jafer, HM and Atherton, W (2016) Characterisation of Soft Soil Microstructure Stabilised With Binary Blending Using Two Waste Fly Ashes. In: 2nd BUiD Doctoral Research Conference, 14 May 2016 - 14 May 2016, The British University in Dubai. (Unpublished)

Jafer, HM, Atherton, W and Ruddock, F (2015) Soft Soil Stabilisation Using High Calcium Waste Material Ash. In: 12th International Post-Graduate Research Conference 2015, 10 June 2015 - 12 June 2015, Salford, Manchester UK. (Unpublished)

Jafer, HM, Atherton, W, Ruddock, F and Loffill, E (2015) Assessing the Potential of a Waste Material for Cement Replacement and the Effect of Its Finennes in Soft Soil Stabilisation. International Journal of Environmental, Chemical, Ecological, Geological and Geophysical Engineering, 9 (8). pp. 877-883.

Jafer, HM, Atherton, W, Ruddock, F and Loffill, E (2016) Mechanical Activation of a Waste Material Used AS Cement Replacement in Soft Soil Stabilisation. In: 15th Asphalt, Pavement Engineering and Infrastructure Conference, 24 February 2016 - 25 February 2016, LJMU. (Unpublished)

Jafer, HM, Atherton, W, Ruddock, F and Loffill, E (2016) The Utilisation of Two Types of Fly Ashes Used as Cement Replacement in Soft Soil Stabilisation. International Journal of Civil, Environmental, Structural, Construction and Architectural Engineering, 10 (7). pp. 881-884. ISSN 1307-6892

Jafer, HM, Atherton, W, Sadique, MM, Ruddock, F and Loffill, E (2017) Stabilisation of soft soil using binary blending of high calcium fly ash and palm oil fuel ash. Applied Clay Science. ISSN 0169-1317

Jafer, HM, Atherton, W, Sadique, MM, Ruddock, FM and Loffill, E (2017) Development of a New Ternary Blended Cementitious Binder Produced from Waste Materials for use in Soft Soil Stabilisation. Journal of Cleaner Production. ISSN 0959-6526

Jafer, HM, Hashim, KS, Atherton, W and Al-attabi, A (2016) A Statistical Model for the Geotechnical Parameters of Cement-Stabilised Hightown's Soft Soil: A Case Study of Liverpool, UK. International Journal of Civil, Environmental, Structural, Construction and Architectural Engineering, 10 (7). pp. 885-890. ISSN 1307-6892

Jamal, M (2015) Characterisation and Evaluation of Thermally Treated Recycled Glass for Mass Finishing and Superfinishing Processes. Doctoral thesis, Liverpool John Moores University.

Jamal, M and Morgan, MN (2017) Materials characterisation part II: tip geometry of the Vickers indenter for microindentation tests. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

Jamal, M and Morgan, MN (2017) Materials characterization part I: contact area of the Berkovich indenter for nanoindentation tests. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768

Jamaludin, L, Razak, RA, Abdullah, MMAB, Vizureanu, P, Brás, A, Imjai, T, Sandu, AV, Abd Rahim, SZ and Yong, HC (2022) The Suitability of Photocatalyst Precursor Materials in Geopolymer Coating Applications: A Review. Coatings, 12 (9). p. 1348. ISSN 2079-6412

Jannat, N (2023) Development of agro-wastes based unfired earth blocks to improve indoor thermal comfort in tropics. Doctoral thesis, Liverpool John Moores University.

Jannat, N, Cullen, J, Abdullah, B, Latif Al-Mufti, RA and Karyono, K (2022) Thermophysical Properties of Sawdust and Coconut Coir Dust Incorporated Unfired Clay Blocks. Construction Materials, 2 (4). pp. 234-257.

Jannat, N, Latif Al-Mufti, RA, Hussein, A, Abdullah, B and Cotgrave, A (2021) Influences of Agro-wastes on the Physico-mechanical and Durability Properties of Unfired Clay Blocks. Construction and Building Materials, 318. ISSN 0950-0618

Jannat, N, Latif Al-Mufti, RA and Hussien, A (2022) Eggshell and Walnut Shell in Unburnt Clay Blocks. CivilEng, 3 (2). pp. 263-276.

Jannat, N, Latif Al-Mufti, RA, Hussien, A, Abdullah, B and Cotgrave, A (2021) Influence of Sawdust Particle Sizes on the Physico-Mechanical Properties of Unfired Clay Blocks. Design, 5 (3). ISSN 2411-9660

Jannat, N, Latif Al-Mufti, RA, Hussien, A, Abdullah, B and Cotgrave, A (2021) Utilisation of nut shell wastes in Brick, Mortar and Concrete: A review. Construction and Building Materials, 293. ISSN 0950-0618

Jara Ten Kathen, M, Peralta, F, Johnson, P, Jurado Flores, I and Gutierrez Reina, D (2023) Performance Evaluation of AquaFeL-PSO Informative Path Planner under Different Contamination Profiles. In: Data Analytics and Computational Intelligence: Novel Models, Algorithms and Applications. Studies in Big Data, 132 . Springer, pp. 405-431. ISBN 978-3-031-38324-3

Jara Ten Kathen, M, Peralta, F, Johnson, P, Jurado Flores, I and Gutiérrez Reina, D (2024) AquaFeL-PSO: An informative path planning for water resources monitoring using autonomous surface vehicles based on multi-modal PSO and federated learning. Ocean Engineering, 311 (1). ISSN 0029-8018

Javed, F, Saif-ul-Allah, MW, Ahmed, F, Rashid, N, Hussain, A, Zimmerman, WB and Rehman, F (2022) Kinetics of Biodiesel Production from Microalgae Using Microbubble Interfacial Technology. Bioengineering, 9 (12).

Jayanetti, JKDDT, Perera, BAKS, Waidyasekara, KGAS and Siriwardena, M (2023) Critical Analysis of Lean Construction Maturity Models: A Systematic Literature Review. Buildings, 13 (6). ISSN 2075-5309

Jayaseelan, J, Pazhani, A, Michael, AX, Paulchamy, J, Batako, A and Hosamane Guruswamy, PK (2022) Characterization Studies on Graphene-Aluminium Nano Composites for Aerospace Launch Vehicle External Fuel Tank Structural Application. Materials, 15 (17). ISSN 1996-1944

Jayasena, HS, Thurairajah, N, Perera, BAKS and Siriwardena, M (2023) Affordance-led framework of understanding of BIM adoption. Archnet-IJAR - International Journal of Architectural Research. ISSN 2631-6862

Jebur, AAJ (2018) An Experimental and Theoretical Study of Pile Foundations Embedded in Sand Soil. Doctoral thesis, Liverpool John Moores University.

Jebur, AAJ, Atherton, W, Al Khaddar, RM and Aljanabi, KR (2019) Performance analysis of an evolutionary LM algorithm to model the load-settlement response of steel piles embedded in sandy soil. Measurement, 140. pp. 622-635. ISSN 0263-2241

Jebur, AAJ, Atherton, W, Al Khaddar, RM and Loffill, E (2018) Artificial neural network (ANN) approach for modelling of pile settlement of open-ended steel piles subjected to compression load. European Journal of Environmental and Civil Engineering. ISSN 1964-8189

Jebur, AAJ, Atherton, W, Al Khaddar, RM and Loffill, E (2017) Nonlinear analysis of single model piles subjected to lateral load in sloping ground. Procedia Engineering, 196. pp. 52-59. ISSN 1877-7058

Jebur, AAJ, Atherton, W, Al Khaddar, RM and Loffill, E (2017) Piles in sandy soil: A numerical study and experimental validation. Procedia Engineering, 196. pp. 60-67. ISSN 1877-7058

Jebur, AAJ, Atherton, W, Al Khaddar, RM and Loffill, E (2018) Settlement Prediction of Model Piles Embedded in Sandy Soil Using the Levenberg–Marquardt (LM) Training Algorithm. Geotechnical and Geological Engineering, 36 (5). pp. 2893-2906. ISSN 0960-3182

Jebur, AAJ, Atherton, W, Loffill, E and Alkhaddar, R (2016) “Analysis of The Lateral Response of A Reinforced Concrete Pile Penetrated In Sand Soil Using Finite Element”. In: International Conference for Doctoral Research, 14 May 2016 - 15 May 2016, British University in Dubai. (Unpublished)

Jemaa, Y, Yeboah, D and Gkantou, M (2024) Flexural performance of glulam timber beams with glued-in BFRP rods connections. Construction and Building Materials, 443. ISSN 0950-0618

Jenkins, M, Loughney, S, Matellini, DB and Wang, J (2024) Advancing the Sustainability of Risk Assessments within the Renewable Energy Sector—Review of Published Risk Assessments. Sustainability, 16 (6).

Jeong, IH, Majd, AE, Jung, JP and Ekere, NN (2020) Electrical and mechanical analysis of different TSV geometries. Metals, 10 (4). ISSN 2075-4701

Ji, Z, Xue, Y, Ren, P, Ye, J, Li, Y, Wu, Y, Wang, D, Wang, S, Wu, J, Wang, Z, Wen, Y, Xia, S, Zhang, L, Zhang, J, Liu, J, Luo, J, Deng, H, Wang, R, Yang, L and Huang, R (2023) Towards Reliability- & Variability-aware Design-Technology Co-optimization in Advanced Nodes: Defect Characterization, Industry-friendly Modelling and ML-assisted Prediction. IEEE Transactions on Electron Devices, 71 (1). pp. 138-150. ISSN 0018-9383

Jian, J, Sun, Z and Sun, K (2024) An Intelligent Automatic Sea Forecasting System Targeting Specific Areas on Sailing Routes. Sustainability (Switzerland), 16 (3). pp. 1-20.

Jiang, M, Liu, Y, Lu, J, Qu, Z and Yang, Z (2022) Risk assessment of maritime supply chains within the context of the Maritime Silk Road. Ocean and Coastal Management, 231. p. 106380. ISSN 0964-5691

Jiang, M, Wang, B, Hao, Y, Chen, S, Wen, Y and Yang, Z (2023) Quantification of CO2 emissions in transportation: An empirical analysis by modal shift from road to waterway transport in Zhejiang, China. Transport Policy, 145. pp. 177-186. ISSN 0967-070X

Jiang, Z, Jiang, C, Liu, J, Chen, X, Shen, L and Gao, R (2024) Application of a novel cylindrical bonnet tool polishing approach to finishing of bearing ring internal surface. Journal of Manufacturing Processes, 117. pp. 14-23. ISSN 1526-6125

Jiang, Z, Xiao, Z, Feng, Y, Cao, Y, Zhou, D and Wang, X (2024) Analysis of risk influential factors of marine pilots during the embarkation and disembarkation. Journal of Marine Engineering & Technology. pp. 1-14. ISSN 2046-4177

Jiao, L, Qu, J and Ge, X (2020) Research on Art Intervention in Rural Cultural Construction. In: Web of Proceedings . (2020 8th International Education, Economics, Social Science, Arts, Sports and Management Engineering Conference, 30 October 2020 - 31 October 2020, Chengdu, China).

Jin, Z, Yang, Z and Ge, H (2018) Energy consumption investigation for a new car-following model considering driver's memory and average speed of the vehicles. Physica A: Statistical Mechanics and its Applications, 506. pp. 1038-1049. ISSN 0378-4371

Johnson, P and Jablokow, K (2019) How do engineering students perceive the importance of creativity within their own leadership development? In: 126th American Society for Engineering Education Annual Conference and Exposition 2019 . (2019 ASEE Annual Conference & Exposition, 16 June 2019 - 19 June 2019, Tampa, Florida).

Johnson, P, Nguyen, QH and Latham, D (2022) Performance evaluation of ROS-based SLAM algorithms for handheld indoor mapping and tracking systems. IEEE Sensors Journal, 23 (1). pp. 706-714. ISSN 1530-437X

Joksimovic, G, Levi, E, Kajevic, A, Mezzarobba, M and Tessarolo, M (2020) Optimal Selection of Rotor Bar Number for Minimizing Torque and Current Pulsations due to Rotor Slot Harmonics in Three-Phase Cage Induction Motors. IEEE Access, 8. pp. 135558-135568. ISSN 2169-3536

Joksimovic, M, Levi, E and Vukosavic, S (2022) Near-complete suppression of harmonic currents in SPMSMs caused by back emf and dead time. IEEE Transactions on Industrial Electronics, 70 (5). pp. 4472-4484. ISSN 0278-0046

Jones, B J (2009) A risk-based maintenance methodology of industrial systems. Doctoral thesis, Liverpool John Moores University.

Jones, ID, Lane, DA, Lotto, RR, Oxborough, D, Neubeck, L, Penson, PE, Czanner, G, Shaw, A, Johnston-Smith, E, Santos, A, McGinn, EE, Ajiboye, A, Town, N and Lip, GYH (2022) Supermarket/Hypermarket Opportunistic Screening for Atrial Fibrillation (SHOPS-AF): A Mixed Methods Feasibility Study Protocol. Journal of Personalized Medicine, 12 (4). ISSN 2075-4426

Jones, IS, Movchan, NV and Movchan, AB (2016) Blockage and guiding of flexural waves in a semi-infinite double grating. Mathematical Methods in the Applied Sciences, 40 (9). pp. 3265-3282. ISSN 1099-1476

Josso, B (2000) New wavelet based space-frequency analysis methods applied to the characterisation of 3-dimensional engineering surface textures. Doctoral thesis, Liverpool John Moores University.

Jwaida, Z, Dulaimi, A, Alyhya, W, Algretawee, H and Al-Busaltan, S (2024) Recycling and utilization of paper sludge ash -current status review and future perspectives. Sustainable Materials and Technologies, 40. ISSN 2214-9929

Jwaida, Z, Dulaimi, A and Bernardo, LFA (2024) The Use of Waste Ceramic in Concrete: A Review. CivilEng, 5 (2). pp. 482-500.

Jwaida, Z, Dulaimi, A, Jafer, H, Mydin, MAO, Al-Khafaji, R and Bernardo, LFA (2024) Improving Soft Subgrade Stability Using a Novel Sustainable Activated Binder Derived from By-Products. Geotechnical and Geological Engineering, 42 (6). pp. 5065-5084. ISSN 0960-3182

Jwaida, Z, Dulaimi, A, Mydin, MAO, Kadhim, YN and Al-Busaltan, S (2024) The self-healing performance of asphalt binder and mixtures: a state-of-the-art review. Innovative Infrastructure Solutions, 9. ISSN 2364-4176

K

Kadhim, A (2021) Synthesis of One-Part Alkali-Activated Cement and Albite-Diopside Glass-Ceramic from Calcium-Alumina-Silicate Precursors. Doctoral thesis, Liverpool John Moores University.

Kadhim, S, Shubbar, A, Al-Khafaji, Z, Nasr, M, Al-Mamoori, S and Falah, MW (2024) Development of ternary blend cement-free binder material for construction. European Journal of Environmental and Civil Engineering. pp. 1-14. ISSN 1964-8189

Kadhum, M, Mahdi, Z, Funfakh, Y, Mohammed, Z, Abdulraheem, M and Gkantou, M (2021) Experimental investigation on the post-fire performance of reactive powder concrete columns. Przegląd Naukowy Inżynieria i Kształtowanie Środowiska, 30 (2). pp. 315-326. ISSN 1732-9353

Kadoury, AH (1986) Turbulent velocity distribution in free vortices above a vertical draw-off. Doctoral thesis, Liverpool John Moores University.

Kaewmuang, P, Pudkon, W, Prasatkhetragarn, A, Nimmanpipug, P, Kittiwachana, S and Kaowphong, S (2018) Comparison of sizes, morphologies and optical properties of nio nanostructures synthesized using acetate and nitrate anions from nickel salts via hydrothermal method. Chiang Mai Journal of Science, 45 (2). pp. 1122-1128. ISSN 0125-2526

Kakaie, A, Guedes Soares, C, Ariffin, AK and Punurai, W (2023) Fatigue Reliability Analysis of Submarine Pipelines Using the Bayesian Approach. Journal of Marine Science and Engineering, 11 (3). p. 580.

Kalaman, S, Yasar, H, Ekmekci, N, Opoz, TT and Ekmekci, B (2018) Powder Mixed Electrical Discharge Machining and Biocompatibility: A State of the Art Review. In: The 18th International Conference on Machine Design and Production , 2. (The 18th International Conference on Machine Design and Production, 03 July 2018 - 06 July 2018, Eskisehir, Turkey).

Kamaris, GS, Hatzigeorgiou, GD and Beskos, DE (2014) Direct damage controlled seismic design of plane steel degrading frames. Bulletin of Earthquake Engineering, 13 (2). pp. 587-612. ISSN 1570-761X

Kamaris, GS, Hatzigeorgiou, GD and Beskos, DE (2009) Direct damage-controlled design of plane steel moment-resisting frames using static inelastic analysis. Journal of Mechanics of Materials and Structures, 4 (7-8). pp. 1375-1393. ISSN 1559-3959

Kamaris, GS, Hatzigeorgiou, GD and Beskos, DE (2013) A new damage index for plane steel frames exhibiting strength and stiffness degradation under seismic motion. Engineering Structures, 46. pp. 727-736. ISSN 0141-0296

Kamaris, GS, Papavasileiou, GS, Kamperidis, VC and Vasdravellis, G (2022) Residual drift risk of self-centering steel MRFs with novel steel column bases in near-fault regions. Soil Dynamics and Earthquake Engineering, 162. p. 107391. ISSN 0267-7261

Kamaris, GS, Skalomenos, KA, Hatzigeorgiou, GD and Beskos, DE (2016) Seismic damage estimation of in-plane regular steel/concrete composite moment resisting frames. Engineering Structures, 115. pp. 67-77. ISSN 0141-0296

Kamaris, GS, Skalomenos, KA, Hatzigeorgiou, GD and Beskos, DE (2015) Simple formulae for damage estimation of composite steel/concrete moment resisting frames. In: COMPDYN 2015 - 5th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering , 2. pp. 3610-3620. (5th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 25th-27th May 2015, Crete Island, Greece).

Kamaris, GS, Tzimas, AS, Karavasilis, TL and Galasso, C (2015) Collapse risk evaluation of self-centering steel MRFS with viscous dampers in near-fault regions. In: COMPDYN 2015 - 5th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering , 1. pp. 299-317. (5th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 25th-27th May 2015, Crete Island, Greece).

Kamaris, GS, Tzimas, AS, Karavasilis, TL and Galasso, C (2015) Collapse risk of self-centering moment resisting frames with viscous dampers in near-fault regions. In: Proceedings of the Fifteenth International Conference on Civil, Structural and Environmental Engineering Computing , 108. (Fifteenth International Conference on Civil, Structural and Environmental Engineering Computing, 1st-4th September 2015, Prague).

Kamaris, GS, Vallianatou, YM and Beskos, DE (2012) Seismic damage estimation of in-plane regular steel moment resisting and x-braced frames. Bulletin of Earthquake Engineering, 10 (6). pp. 1745-1766. ISSN 1570-761X

Kamperidis, VC, Papavasileiou, GS, Kamaris, GS and Vasdravellis, G (2020) Seismic collapse of self-centering steel MRFs with different column base structural properties. Journal of Constructional Steel Research, 175. ISSN 0143-974X

Kapogiannis, G, Palaios, P and Sawhney, A (2024) Digital Construction led Growth Asymmetries in Europe: The need for Collaborative Culture. Construction Economics and Building, 24 (1/2).

Kaptan, M, Ugurlu, O and Wang, J (2021) The effect of nonconformities encountered in the use of technology on the occurrence of collision, contact and grounding accidents. Reliability Engineering and System Safety, 215. ISSN 0951-8320

Kara-Mohamed, M (2024) Teaching Without PowerPoint Slides in Engineering: A pilot Study. International Journal of Mechanical Engineering Education. ISSN 0306-4190

Kara-Mohamed, M, Zhang, Q and Yan, X (2023) Design and Control of an Innovative Overactuated Thrust Vectoring Six-DoF Quadrotor for Extreme and Challenging Environments. Unmanned Systems. pp. 1-17. ISSN 2301-3850

Karaghool, HAK, Hashim, KS, Kot, P and Muradov, M (2022) Preliminary Studies of Methylene Blue Remotion from Aqueous Solutions by Ocimum basilicum. Environments, 9 (2). ISSN 2076-3298

Karout, S (2007) Two-dimensional phase unwrapping. Doctoral thesis, Liverpool John Moores University.

Karyono, K (2023) A Novel Indoor Adaptive Thermal Comfort System to Reduce the Energy Consumption for the Residential Dwellings. Doctoral thesis, LJMU.

Karyono, K, Abdullah, B, Cotgrave, A and Brás, A Experience and Memory Principle for Adaptive Indoor Thermal Comfort. In: 11th International Conference on Intelligent Energy Management, Electronics, Electric & Thermal Power, Robotics and Automation (IEMERA 2020), 01 October 2020 - 03 October 2020, London, Virtual. (Accepted)

Karyono, K, Abdullah, BM, Cotgrave, A, Brás, A and Cullen, J (2024) Field studies of the Artificial Intelligence model for defining indoor thermal comfort to acknowledge the adaptive aspect. Engineering Applications of Artificial Intelligence, 133. ISSN 0952-1976

Karyono, K, Abdullah, BM, Cotgrave, AJ and Armada Bras, AM (2020) A smart adaptive lighting system for a multifunctional room. In: Proceedings - International Conference on Developments in eSystems Engineering, DeSE , Octobe. (12th International Conference on Developments in eSystems Engineering (DeSE), 7-10 October 2019, Kazan, Russia).

Karyono, K, Abdullah, BM, Cotgrave, AJ and Brás, A (2020) The Adaptive Thermal Comfort Review from the 1920s, the Present, and the Future. Developments in the Built Environment, 4. ISSN 2666-1659

Karyono, K, Abdullah, BM, Cotgrave, AJ, Brás, A and Cullen, J (2024) Developing a Reliable Shallow Supervised Learning for Thermal Comfort using Multiple ASHRAE Databases. IEEE Transactions on Artificial Intelligence. pp. 1-13.

Karyono, K, Pal, M, Abdullah, B and Cotgrave, A (2019) EnvironMoores: Efficient NoVel Intelligent Reliable OccupatioN Monitoring for IndOor human-comfORt adaptivE System. In: Doctoral Academy Conference 2019: Community, 08 May 2019 - 09 May 2019, The Maritime Museum, Albert Dock, Liverpool.

Karyono, K, Pal, M and Gulati, T EnvironMoores: Efficient NoVel Intelligent Reliable OccupatioN Monitoring for IndOor light-comfORt adaptivE System. In: (Unpublished)

Karyono, K, Romano, A, Abdullah, BM, Cullen, J and Bras, A (2021) The role of hygrothermal modelling for different housing typologies by estimating indoor relative humidity, energy usage and anticipation of fuel poverty. Building and Environment, 207 (B). ISSN 0007-3628

Kayleigh, E, Abdellatif, M, Amoako-Attah, J, AlQuzweeni, S and Hashim, KS (2021) Mitigating the impact of climate change on UK buildings through zero energy strategies. In: IOP Conference Series : Earth and Environmental Science , 877. (The 7th International Conference on Renewable Energy and Materials Technology (ICOREMT 2021), 1st-2nd September 2021, Erbil, Iraq).

Kelly, CL (2021) DEVELOPMENT OF A SITE SELECTION TOOL BASED IN LIFE CYCLE ASSESSMENT (LCA), FOR TIDAL POWER SCHEMES. Doctoral thesis, Liverpool John Moores University.

Kelly, S K (1994) Intelligent control for the centreless grinding of compliant, thin walled cylinders. Doctoral thesis, Liverpool John Moores University.

Khairan, HE, Zubaidi, SL, Al-Mukhtar, M, Dulaimi, A, Al-Bugharbee, H, Al-Faraj, FA and Ridha, HM (2023) Assessing the Potential of Hybrid-Based Metaheuristic Algorithms Integrated with ANNs for Accurate Reference Evapotranspiration Forecasting. Sustainability, 15 (19). ISSN 2071-1050

Khalique, A (2024) Human factors: eliminating instrumental distractions on a ship’s bridge to improve watch officer’s situational awareness focus. Doctoral thesis, Liverpool John Moores University.

Khalique, A, Bury, A and Loughney, S (2024) Analysis and Optimisation of Best Practice for Proper Lookout at Night. TransNav, 18 (2). pp. 357-367. ISSN 2083-6473

Khan, SU, Khalid, M, Hashim, K, Jamadi, MH, Mousazadeh, M, Basheer, F and Farooqi, IH (2023) Efficacy of Electrocoagulation Treatment for the abatement of Heavy Metals: An Overview of Critical Processing Factors, Kinetic Models and Cost Analysis. Sustainability, 15 (2). ISSN 2071-1050

Khansaheb, H (2024) Solutions to the sedimentation and maintenance of semi-enclosed channels "How to deal with sedimentations in Dubai Canal?". Doctoral thesis, Liverpool John Moores University.

King, DC (2017) The Engineering Council’s influence on Building Services Engineering education and qualifications: towards an internationalist education and training model. Doctoral thesis, Liverpool John Moores University.

Kirecci, A (1993) Motion design for high speed machines. Doctoral thesis, Liverpool John Moores University.

Kirwan, J (2021) MECHANICAL PROPERTIES AND CRACK RETARDATION OF GLASS FIBRE MICROASPHALT. Doctoral thesis, Liverpool John Moores University.

Kokkarinen, N I A (2012) Development of a measurement tool to assess sustainability in the built environment curriculum using psychological constructs. Doctoral thesis, Liverpool John Moores University.

Kontovas, CA and Sooprayen, K (2020) Maritime Cargo Prioritisation during a Prolonged Pandemic Lockdown Using an Integrated TOPSIS-Knapsack Technique: A Case Study on Small Island Developing States—The Rodrigues Island. Sustainability, 12 (19). ISSN 2071-1050

Kostenevych, OS and Ren, J (2021) Prediction of residual stresses after welding of duplex steel taking into account phase transformations. Avtomatičeskaâ svarka (Kiev) The Paton Welding Journal, 2021 (1). pp. 14-19. ISSN 0005-111X

Kot, P, Markiewicz, J, Muradov, M, Lapinski, S, Shaw, A, Zawieska, D, Tobiasz, A and Al-Shamma'a, A (2020) Combination of the Photogrammetric and Microwave Remote Sensing for Cultural Heritage Documentation and Preservation– Preliminary Results. In: The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences , XLIII. pp. 1409-1413. (The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences (ISPRS), 04 July 2020 - 10 July 2020).

Kot, P, Muradov, M, Gkantou, M, Kamaris, GS, Hashim, KS and Yeboah, D (2021) Recent Advancements in Non-Destructive Testing Techniques for Structural Health Monitoring. Applied Sciences, 11 (6). ISSN 2076-3417

Kot, P, Muradov, M, Ryecroft, S, Ortoneda Pedrola, M, Shaw, A, Hemingway, J, Deb, R and Coleman, M (2018) Identification of Optimal Frequencies to Determine Alpha-Cypermethrin using Machine Learning Feature Selection Techniques. In: 2018 IEEE Congress on Evolutionary Computation (CEC) . (IEEE Congress on Evolutionary Computation (IEEE CEC 2018), 08 July 2018 - 13 July 2018, Rio de Janeiro, Brazil).

Kot, P, Shaw, A, Ali, A, Alias, A and Riley, ML (2016) The Application of Electromagnetic Waves in Monitoring Water Infiltration on Concrete Flat Roof: The Case of Malaysia. CONSTRUCTION AND BUILDING MATERIALS, 122. pp. 435-445. ISSN 0950-0618

Kot, P, Shaw, A, Jones, KO, Cullen, J, Mason, A and Al-Shamma'a, A (2020) The feasibility of using electromagnetic waves in determining the moisture content of building fabrics and the cause of the water ingress. International Journal on Smart Sensing and Intelligent Systems, 7 (5). ISSN 1178-5608

Kotadia, H (2021) HOW ALUMINIUM IS HELPING TO DECARBONISE THE TRANSPORT SECTOR AND PROMOTE A SUSTAINABLE FUTURE. Aluminium Federation, UK.

Kotadia, H (2021) Toward Sustainable Transportation through Aluminium. Aluminium Federation Ltd..

Kotadia, HR, Franciosa, P, Jabar, S and Ceglarek, D (2022) Remote laser welding of Zn coated IF steel and 1050 aluminium alloy: processing, microstructure and mechanical properties. Journal of Materials Research and Technology, 19. pp. 449-465. ISSN 2238-7854

Kraidi, L (2020) DEVELOPMENT OF AN INTEGRATED RISK MANAGEMENT FRAMEWORK FOR OIL AND GAS PIPELINE PROJECTS. Doctoral thesis, Liverpool John Moores University.

Kraidi, L, Shah, RK, Matipa, W, Borthwick, F and Hashim, KS (2019) Development of Risk Optimisation Model for Oil and Gas Transportation Pipeline Routes. In: IOP Conference Series: Materials Science and Engineering (584). (The International Conference on Civil and Environmental Engineering Technologies (ICCEET), 23 April 2019 - 24 April 2019, University of Kufa, Iraq).

Kraidi, L, Shah, RK, Matipa, WM and Borthwick, F (2018) Analysing the Critical Risk Factors associated with Oil and Gas Pipeline Projects in Iraq. International Journal of Critical Infrastructure Protection, 24. pp. 14-22. ISSN 1874-5482

Kraidi, L, Shah, RK, Matipa, WM and Borthwick, F (2018) Analysing the Critical Risk Factors of Oil and Gas Pipeline Projects in Iraq. In: The 3rd BUiD Doctoral Research Conference 2017 Proceedings . pp. 133-148. (The3rd BUiD Doctoral Research Conference, 13 May 2017 - 13 May 2017, The British University in Dubai).

Kraidi, L, Shah, RK, Matipa, WM and Borthwick, F (2018) An Analysis of the Critical Risk Factors in Oil and Gas Pipeline Projects using a Comprehensive Risk Management Framework. In: ARCOM Conference Proceedings . pp. 360-369. (Association of Researchers in Construction Management 34th (ARCOM 4th), 03 September 2018 - 05 September 2018, Belfast).

Kraidi, L, Shah, RK, Matipa, WM and Borthwick, F (2018) Analyzing the Critical Risk Factors in Oil and Gas Pipelines Projects Regarding the Perceptions of the Stakeholders. In: CCC 2018 - Proceedings . (Creative Construction Conference 2018, 30 June 2018 - 03 July 2018, Ljubljana, Slovenia).

Kraidi, L, Shah, RK, Matipa, WM and Borthwick, F (2018) Application of Fuzzy Based Model to Manage the Critical Risk Factors in Oil and Gas Pipeline Projects. In: CIDM 2018 – 5th International Conference on Interactive Digital Media . (ICIDM 2018 – 5th International Conference on Interactive Digital Media, 11 December 2018 - 12 December 2018, Liverpool, UK).

Kraidi, L, Shah, RK, Matipa, WM and Borthwick, F Application of Fuzzy Logic Theory on Risk Assessment in Oil and Gas Pipeline Projects. In: ASC 2019 International Conference . (ASC 2019 International Conference, 10-13 April 2019, Denver, Colorado, USA). (Accepted)

Kraidi, L, Shah, RK, Matipa, WM and Borthwick, F (2018) The Development of a Questionnaire Survey to Investigate the Critical Risk Factors in Oil and Gas Pipelines Projects. In: CCC 2018 - Proceedings . (Creative Construction Conference 2018, 30 June 2018 - 03 July 2018, Ljubljana, Slovenia).

Kraidi, L, Shah, RK, Matipa, WM and Borthwick, F (2021) An Investigation of mitigating the Safety and Security Risks allied with Oil and Gas Pipeline Project: a case study in Iraq. Journal of Pipeline Science and Engineering, 1 (3). pp. 349-359. ISSN 2667-1433

Kraidi, L, Shah, RK, Matipa, WM and Borthwick, F Investigation of the Risk Factors Causing Safety and Delay Issues in Oil and Gas Pipeline Construction Projects. In: Procedia Manufacturing . (15th Global Congress on Manufacturing and Management (GCMM-2020), 7th - 9th June 2021, Liverpool, UK).

Kraidi, L, Shah, RK, Matipa, WM and Borthwick, F (2020) Using stakeholders’ judgement and fuzzy logic theory to analyze the risk influencing factors in oil and gas pipeline projects: Case study in Iraq, Stage II. International Journal of Critical Infrastructure Protection, 28. ISSN 1874-5482

Krywonos, J (2011) Numerical modelling of bladder filling and prostate positioning in modern radiotherapy. Doctoral thesis, Liverpool John Moores University.

L

Lace, R, Duffy, GL, Gallagher, AG, Doherty, KG, Maklad, O, Wellings, DA and Williams, RL (2021) Characterization of Tunable Poly-ε-Lysine-Based Hydrogels for Corneal Tissue Engineering. Macromolecular Bioscience. ISSN 1616-5187

Lam, S, Wang, F, Yeap, SP, Teng, KH, Shaw, A, Karunamoothei, V, Khosravi, V and Liu, C (2024) On the Rapid Synthesis of Reduced Graphene Oxide via Ultrasound-Promoted Eco-Friendly Reduction Approach and Its Effects on Physicochemical Properties. ChemSusChem. ISSN 1864-5631

Latham, K (2023) REAL-TIME VISUALISATION AND ANALYSIS OF TACTILE INFORMATION USING FORCE SENSORS DURING ARTERIAL THREADING. Doctoral thesis, Liverpool John Moores University.

Latif Al-Mufti, RAWM and Fried, AN (2016) Pulse velocity assessment of early age creep of concrete. Construction and Building Materials, 121. pp. 622-628. ISSN 0950-0618

Le, HT, Punurai, W, Yubonmhat, K, Yuliati, E, Leow, JS, Kang, HS, Amelia, S, Yaakob, OB, Zawawi, NAW, Wang, J and Van Le, S (2023) Naturally Occurring Radioactive Material Waste Management in the ASEAN Oil and Gas Industry: A Review. Journal of Hazardous, Toxic, and Radioactive Waste, 28 (1). ISSN 2153-5493

Lei, M, Zhang, X, Yang, W, Wan, J, Dong, Z, Zhang, C and Zhang, G (2024) High-Precision Drilling by Anchor-Drilling Robot Based on Hybrid Visual Servo Control in Coal Mine. MDPI Mathematics, 12 (13).

Leiblein, T, Tucker, MP, Ashall, M, Al Khaddar, RM, Lee, S, Gollnisch, C, Gollnisch, LP and Hofer, S (2018) National legislation, standards and recommendations with respect to water risk management and Legionella prevention. Journal for Facility Management (16). pp. 35-51. ISSN 2520-5404

Leonardi, N, Matsoukis, C and Carnacina, I (2020) Numerical investigation of the spatial distribution of Escherichia coli in river deltas for different values of river discharge, temperature and irradiation of the water surface. H2Open Journal, 3 (1). ISSN 2616-6518

Lersteau, C, Nguyen, TT, Le, TT, Nguyen, HN and Shen, W (2021) Solving the problem of stacking goods: mathematical model, heuristics and a case study in container stacking in ports. IEEE Access, 9. pp. 25330-25343. ISSN 2169-3536

Levi, E, Brkovic, B, Jecmenica, M and Lazarevic, Z (2020) Saturated VSD model of a six-phase induction machine. IET Electric Power Applications, 14 (14). pp. 2762-2771. ISSN 1350-2352

Li, B (2009) Development of an inverse FE modelling method for material parameters identification based on indentation tests. Doctoral thesis, Liverpool John Moores University.

Li, G, Liu, M, Zhang, X, Wang, C, Lai, KH and Qian, W (2022) Semantic Recognition of Ship Motion Patterns Entering and Leaving Port Based on Topic Model. Journal of Marine Science and Engineering, 10 (12).

Li, G, Zhang, X, Jiang, L, Wang, C, Huang, R and Liu, Z (2024) An approach for traffic pattern recognition integration of ship AIS data and port geospatial features. Geo-Spatial Information Science. pp. 1-28. ISSN 1009-5020

Li, G, Zhang, X, Shu, Y, Wang, C, Guo, W and Wang, J (2024) Ship Anomalous Behavior Detection in Port Waterways Based on Text Similarity and Kernel Density Estimation. Journal of Marine Science and Engineering, 12 (6).

Li, H (2024) Reliable Hybridization Approach for Estimation of The Heating Load of Residential Buildings. International Journal of Advanced Computer Science and Applications, 15 (3). pp. 809-818. ISSN 2158-107X

Li, H, Chen, Y, Dai, Y, Yang, L and Zhang, S (2024) Genome-wide identification and expression analysis of histone deacetylase and histone acetyltransferase genes in response to drought in poplars. BMC Genomics, 25.

Li, H, Ding, M, Luo, X and Xiang, S (2024) Convergence analysis of finite element approximations for a nonlinear second order hyperbolic optimal control problems. Networks and Heterogeneous Media (NHM), 19 (2). pp. 842-866. ISSN 1556-1801

Li, H, Jia, P, Wang, X, Yang, Z, Wang, J and Kuang, H (2022) Ship carbon dioxide emission estimation in coastal domestic emission control areas using high spatial-temporal resolution data: A China case. Ocean and Coastal Management, 232. ISSN 0964-5691

Li, H, Jiao, H and Yang, Z (2023) AIS data-driven ship trajectory prediction modelling and analysis based on machine learning and deep learning methods. Transportation Research Part E: Logistics and Transportation Review, 175. p. 103152. ISSN 1366-5545

Li, H, Jiao, H and Yang, Z (2023) Ship trajectory prediction based on machine learning and deep learning: A systematic review and methods analysis. Engineering Applications of Artificial Intelligence, 126. ISSN 0952-1976

Li, H, Kang, L, Li, M, Luo, X and Xiang, S (2024) Hamiltonian conserved Crank-Nicolson schemes for a semi-linear wave equation based on the exponential scalar auxiliary variables approach. Electronic Research Archive (ERA), 32 (7). pp. 4433-4453.

Li, H, Lam, JSL, Yang, Z, Liu, J, Liu, RW, Liang, M and Li, Y (2022) Unsupervised hierarchical methodology of maritime traffic pattern extraction for knowledge discovery. Transportation Research Part C: Emerging Technologies, 143. p. 103856. ISSN 0968-090X

Li, H, Liu, J, Yang, Z, Liu, RW, Wu, K and Wan, Y (2020) Adaptively constrained dynamic time warping for time series classification and clustering. Information Sciences, 534. pp. 97-116. ISSN 0020-0255

Li, H, Ren, X and Yang, Z (2022) Data-driven Bayesian network for risk analysis of global maritime accidents. Reliability Engineering & System Safety, 230. ISSN 0951-8320

Li, H, Xing, W, Jiao, H, Yang, Z and Li, Y (2023) Deep bi-directional information-empowered ship trajectory prediction for maritime autonomous surface ships. Transportation Research Part E: Logistics and Transportation Review, 181. ISSN 1366-5545

Li, H, Zhou, K, Zhang, C, Bashir, M and Yang, Z (2024) Dynamic evolution of maritime accidents: Comparative analysis through data-driven Bayesian Networks. Ocean Engineering, 303. ISSN 0029-8018

Li, N, Sheng, H, Wang, P, Jia, Y, Yang, Z and Jin, Z (2022) Modeling Categorized Truck Arrivals at Ports: Big Data for Traffic Prediction. IEEE Transactions on Intelligent Transportation Systems, 24 (3). pp. 2772-2788. ISSN 1524-9050

Li, P, Wang, Y and Yang, Z (2024) Risk assessment of maritime autonomous surface ships collisions using an FTA-FBN model. Ocean Engineering, 309. ISSN 0029-8018

Li, Q, Yuan, S, Batako, A, Chen, B, Gao, X, Li, Z and Amin, M (2024) Modeling for ultrasonic vibration-assisted helical grinding of SiC particle-reinforced Al-MMCs. International Journal of Advanced Manufacturing Technology, 131 (9-10). pp. 5223-5242. ISSN 0268-3768

Li, Q, Yuan, S, Gao, X, Zhang, Z, Chen, B, Li, Z and Batako, ADL (2022) Surface and subsurface formation mechanism of SiCp/Al composites under ultrasonic scratching. Ceramics International, 49 (1). pp. 817-833. ISSN 0272-8842

Li, R, Zhang, X, Jiang, L, Yang, Z and Guo, W (2022) An adaptive heuristic algorithm based on reinforcement learning for ship scheduling optimization problem. Ocean and Coastal Management, 230. pp. 1-15. ISSN 0964-5691

Li, S, Qu, R, Zhang, Y and Yu, D (2023) Research on Freezing of Gait Recognition Method Based on Variational Mode Decomposition. Intelligent Automation & Soft Computing, 37 (3). pp. 2809-2823. ISSN 1079-8587

Li, Y (2009) Digital Holography and Optical Contouring. Doctoral thesis, Liverpool John Moores University.

Li, Y, Bai, T, Zhang, J and Gao, Y (2023) Advances in Regenerated Asphalt Mixtures. Materials, 16 (7). ISSN 1996-1944

Li, Y, Du, H and Kumaraswamy, SB (2023) Case-based reasoning approach for decision-making in building retrofit: A review. Building and Environment, 248. p. 111030. ISSN 0360-1323

Li, Y, Feng, J, Wu, S, Chen, A, Kuang, D, Bai, T, Gao, Y, Zhang, J, Li, L, Wan, L, Liu, Q, Chen, Z and Gu, D (2022) Review of ultraviolet ageing mechanisms and anti-ageing methods for asphalt binders. Journal of Road Engineering, 2 (2). pp. 137-155. ISSN 2097-0498

Li, Y, Hu, B, Gao, Y, Feng, J and Kot, P (2024) Electrical characteristics and conductivity mechanism of self-sensing asphalt concrete. Construction and Building Materials, 416. ISSN 0950-0618

Li, Y, Li, H, Zhang, C, Zhao, Y and Yang, Z (2024) Incorporation of adaptive compression into a GPU parallel computing framework for analyzing large-scale vessel trajectories. Transportation Research Part C: Emerging Technologies, 163. ISSN 0968-090X

Li, Y, Liang, M, Li, H, Yang, Z, Du, L and Chen, Z (2023) Deep learning-powered vessel traffic flow prediction with spatial-temporal attributes and similarity grouping. Engineering Applications of Artificial Intelligence, 126. ISSN 0952-1976

Li, Z, Wang, J, Shi, Z, Zhou, Y, Guo, J, Ren, X and Yang, Q (2021) Refinement mechanism of (Ti, Nb)(C, N) carbonitride in hypereutectic Fe-Cr-C-Ti-Nb-N coating by CeO2: A first principles study. Materials Today Communications, 27. ISSN 2352-4928

Li, Z, Yuan, S, Ma, J, Shen, J and Batako, ADL (2021) Cutting force and specific energy for rotary ultrasonic drilling based on kinematics analysis of vibration effectiveness. Chinese Journal of Aeronautics. ISSN 1000-9361

Liang, M, Li, H, Liu, RW, Lam, JSL and Yang, Z (2023) PiracyAnalyzer: Spatial temporal patterns analysis of global piracy incidents. Reliability Engineering & System Safety, 243. ISSN 0951-8320

Liang, X, Fan, S, Lucy, J and Yang, Z (2022) Risk analysis of cargo theft from freight supply chains using a data-driven Bayesian network. Reliability Engineering and System Safety, 226. p. 1. ISSN 0951-8320

Lim, CS, Lee, SS and Levi, E (2022) Continuous-control-set Model Predictive Current Control of Asymmetrical Six-phase Drives Considering System Non-idealities. IEEE Transactions on Industrial Electronics. ISSN 0278-0046

Lin, C-C, Yang, Z and Chang, C-H (2022) Facilitating adoption of virtual communities through emotional connection in the global logistics industry. International Journal of Logistics: Research and Applications. ISSN 1367-5567

Lin, CW, Lee, MK, Yang, Z and Tae-Woo Lee, P (2022) Performance evaluation of Asian major cruise terminals. Ocean and Coastal Management, 221. ISSN 0964-5691

Liu, B, Wang, X, Torres, JA, He, T, Zhou, H, Zhao, H, Zeng, C, Ma, L, Chen, X and Zhu, G (2023) In situ thermal characterisation and filamentary modification in Polymethylpentene. Infrared Physics & Technology, 130. ISSN 1350-4495

Liu, J, Li, H, Yang, Z, Wu, K, Liu, Y and Liu, RW (2019) Adaptive Douglas-Peucker Algorithm With Automatic Thresholding for AIS-Based Vessel Trajectory Compression. IEEE Access, 7. 150677 -150692. ISSN 2169-3536

Liu, J, Zhang, Q and Liu, X (2020) Understanding handling performance of rugby balls under wet conditions: analysis of finger-ball friction. International Journal of Performance Analysis in Sport. ISSN 1474-8185

Liu, K, Yu, Q, Yang, Z, Wan, C and Yang, Z (2022) BN-based port state control inspection for Paris MoU: New risk factors and probability training using big data. Reliability Engineering and System Safety, 224. p. 108530. ISSN 0951-8320

Liu, Q, Bashir, M, Iglesias, G, Miao, W, Yue, M, Xu, Z, Yang, Y and Li, C (2024) Investigation of aero-hydro-elastic-mooring behavior of a H-type floating vertical axis wind turbine using coupled CFD-FEM method. Applied Energy, 372. ISSN 0306-2619

Liu, Q, Miao, W, Bashir, M, Xu, Z, Yu, N, Luo, S and Li, C (2022) Aerodynamic and aeroacoustic performance assessment of a vertical axis wind turbine by synergistic effect of blowing and suction. Energy Conversion and Management, 271. ISSN 0196-8904

Liu, W, Wang, S, Jiang, Q, Morgan, M and Liu, X (2022) Study on the Motion Characteristics of Abrasive Media in Vibratory Finishing. In: Journal of Physics: Conference Series , 2198 (1). (15th Global Congress on Manufacturing and Management (GCMM 2021), 25th -27th November 2020, Liverpool, UK).

Liu, X Novel Approaches to Determine Element Trajectory in the Centrifugal Disk Finishing Process. In: The 6th International Conference on Nanomanufacturing (nanoMan2018), 4th-6th July 2018, Brunel University London, UK. (Unpublished)

Liu, X, Maiti, R, Lu, ZH, Carré, MJ, Matcher, SJ and Lewis, R (2017) New Non-invasive Techniques to Quantify Skin Surface Strain and Sub-surface Layer Deformation of Finger-pad during Sliding. Biotribology, 12. pp. 52-58. ISSN 2352-5738

Liu, X, Ren, P, Chen, H, Ji, Z, Liu, J, Wang, R, Zhang, JF and Huang, R (2022) Equiprobability-based Local Response Surface Method for High-Sigma Yield Estimation with Both High Accuracy and Efficiency. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 42 (4). pp. 1346-1350. ISSN 0278-0070

Liu, Y (2018) FAULT DETECTION AND ISOLATION FOR WIND TURBINE DYNAMIC SYSTEMS. Doctoral thesis, Liverpool John Moores University.

Liu, Y, Liu, B, Ur-Rehman, M, Imran, M, Akinsolu, MO, Excell, P and Hua, Q (2022) An Efficient Method for Antenna Design Based on a Self-Adaptive Bayesian Neural Network Assisted Global Optimization Technique. IEEE Transactions on Antennas and Propagation, 70 (12). pp. 11375-11388. ISSN 0018-926X

Liu, Y, Liu, J, Liu, Y, Zhang, Q, Shu, J and Zhang, Y (2024) Simulation modelling and analysis of linkage-controlled traffic scheme in Waterway Transport Key Nodes. Simulation Modelling Practice and Theory, 134. ISSN 1569-190X

Liu, Y, Liu, J, Zhang, Q, Liu, Y and Wang, Y (2024) Effect of dynamic safety distance of heterogeneous traffic flows on ship traffic efficiency: A prediction and simulation approach. Ocean Engineering, 294. ISSN 0029-8018

Liu, Z, Liu, J, Li, H, Li, Z, Tan, Z, Liu, RW and Liu, Yi (2017) Hierarchical and coupling model of factors influencing vessel traffic flow. PLoS One, 12 (4). ISSN 1932-6203

Lorenzo, TM and Vanrenterghem, J (2014) Effects of increased anterior-posterior voluntary sway frequency on mechanical and perceived postural stability. HUMAN MOVEMENT SCIENCE, 39. pp. 189-199. ISSN 0167-9457

Lotfivand, A (2023) State of charge estimation for lithium-ion batteries with model-based algorithms. Other thesis, Liverpool John Moores University.

Lotfivand, A, Yu, D and Gomm, B (2022) State Of Charge estimation using Extended Kalman Filter in Electric Vehicles. In: 2022 27th International Conference on Automation and Computing (ICAC) . (2022 27th International Conference on Automation and Computing (ICAC), 1st - 3rd September 2022, Bristol, United Kingdom).

Loughney, S and Wang, J (2020) Development of an Algorithm to Convert Linear Belief Function inputs to Exponential Conditional Probability Functions for Multiple Method Applications. In: Proceedings of the 30th European Safety and Reliability Conference and 15th Probabilistic Safety Assessment and Management Conference . pp. 4524-4531. (Proceedings of the 30th European Safety and Reliability Conference (ESREL), 01 November 2020 - 05 November 2020, Venice, Italy).

Loughney, S, Wang, J, Bashir, M, Armin, M and Yang, Y (2021) Development and application of a multiple-attribute decision-analysis methodology for site selection of floating offshore wind farms on the UK Continental Shelf. Sustainable Energy Technologies and Assessments, 47. ISSN 2213-1388

Loughney, S, Wang, J and Matellini, DB (2019) Applying a Bayesian Network methodology to an offshore gas turbine driven power generator to demonstrate the cause and effect relationship of the turbine running over-speed and the associated switchboard failures. In: Proceedings of the 29th EUROPEAN SAFETY AND RELIABILITY CONFERENCE (ESREL 2019) . (29th EUROPEAN SAFETY AND RELIABILITY CONFERENCE (ESREL 2019)?, 22 September 2019 - 26 September 2019, Hanover, Germany).

Loughney, S, Wang, J, Matellini, DB and Nguyen, TT (2021) Utilizing the Evidential Reasoning approach to determine a suitable wireless sensor network orientation for asset integrity monitoring of an offshore gas turbine driven generator. Expert Systems with Applications. ISSN 0957-4174

Loughney, S, Wang, J, Matellini, DB and Pemberton, K (2024) Investigation and analysis of ship to platform collision incidents on the UK continental shelf: highlighting trends between the enforcement of offshore regulations and the occurrence of vessel to platform collision incidents. Journal of Marine Engineering and Technology. pp. 1-16. ISSN 2046-4177

Loughney, S, Wang, J and Wall, A (2020) Ship/Platform Collision Incident Database (2015) for offshore oil and gas installations. Technical Report. Health and Safety Executive.

Lu, D, Theotokatos, G, Zhang, J, Zeng, H and Cui, K (2022) Comparative Assessment and Parametric Optimisation of Large Marine Two-Stroke Engines with Exhaust Gas Recirculation and Alternative Turbocharging Systems. Journal of Marine Science and Engineering, 10 (3). ISSN 2077-1312

Lu, J, Guo, J, Shi, C, Ren, X, Han, F, Wang, J and Yang, Q (2023) Hardness prediction of the carbides in Fe-based multi-elements alloy by first-principles. MRS Communications, 13 (6). pp. 1315-1319. ISSN 2159-6859

Lu, J, Zhang, M, Feng, J, Gao, Y, Yang, Y, Li, Y and Li, L (2023) Investigation on the technical performance and workability of hot-melting road marking materials using for the high-altitude area. Case Studies in Construction Materials, 18. ISSN 2214-5095

Lu, K, Chen, X, Pang, X and Liu, F (2024) Time-varying vibration characteristics and surface topography of thin-walled cylinders during machining operations. Measurement, 232. ISSN 0263-2241

Lu, K, Wang, X, Chen, X, Pang, X and Gu, F (2023) Experimental Study on Entropy Features in Machining Vibrations of A Thin-walled Tubular Workpiece. Journal of Dynamics, Monitoring and Diagnostics. ISSN 2833-650X

Lu, L, Sharf, A, Zhao, H, Wei, Y, Fan, Q, Chen, X, Savoye, Y, Tu, C, Cohen-Or, D and Chen, B (2014) Build-to-Last: Strength to Weight 3D Printed Objects. ACM Transactions On Graphics, 33 (4). ISSN 0730-0301

M

Ma, F, Kang, Z, Chen, C, Sun, J, Xu, XB and Wang, J (2024) Identifying Ships From Radar Blips Like Humans Using a Customized Neural Network. IEEE Transactions on Intelligent Transportation Systems, 25 (7). pp. 7187-7205. ISSN 1524-9050

Ma, J, Zhang, WD, Zhang, JF, Ji, Z, Benbakhti, B, Franco, J, Mitard, J, Witters, L, Collaert, N and Groeseneken, G (2015) AC NBTI of Ge pMOSFETs: Impact of Energy Alternating Defects on Lifetime Prediction. In: 2015 Symposium on VLSI Technology Digest of Technical Papers . T34-T35. (2015 SYMPOSIUM ON VLSI TECHNOLOGY, 15th - 19th June 2015, Kyoto, Japan).

Ma, X, Fan, S, Blanco-Davis, E, Shi, G and Yang, Z (2024) Bulk carrier accident severity analysis in Australian waters using a data-driven Bayesian network. Ocean Engineering, 310. ISSN 0029-8018

Maaroof, BF, Al-Musawi, MA, Kareem, HH, Al-Abdan, RH, Obaid, HS, AL- Hasani, B, Abdellatif, M and Carnacina, I (2023) Geographical Assessment of the Natural Environment at Al-Huwaizah Marsh, Eastern Of Misan Governorate (Iraq). Misan Journal for Academic Studies, 22 (46). p. 188. ISSN 1994-697X

Madubuike, K (2022) Fault diagnosis and fault tolerant control for wind turbine dynamic systems. Doctoral thesis, Liverpool John Moores University.

Mahmmod, BM, Abdulhussain, SH, Suk, T and Hussain, A (2022) Fast Computation of Hahn Polynomials for High Order Moments. IEEE Access.

Mahmmod, LMR, Dulaimi, A, Bernardo, LFA and Andrade, JMDA (2024) Characteristics of Lightweight Concrete Fabricated with Different Types of Strengthened Lightweight Aggregates. Journal of Composites Science, 8 (4).

Mahmood, OA, Sulaiman, SO and Al-Jumeily, D (2024) Forecasting for Haditha reservoir inflow in the West of Iraq using Support Vector Machine (SVM). PLoS ONE, 19 (9).

Mahyoub, M, Natalia, F, Sudirman, S, Al-Jumaily, AHJ and Liatsis, P (2023) Semantic Segmentation and Depth Estimation of Urban Road Scene Images Using Multi-Task Networks. In: Proceedings - 2023 15th International Conference on Developments in eSystems Engineering (DESE) , 2023-J. pp. 469-474. (2023 15th International Conference on Developments in eSystems Engineering (DESE), 9-12 Jan. 2023, Baghdad & Anbar, Iraq).

Mahyoub, M, Natalia, F, Sudirman, S, Liatsis, P and Jasim Al-Jumaily, AH (2023) Data Augmentation Using Generative Adversarial Networks to Reduce Data Imbalance with Application in Car Damage Detection. In: Proceedings - 2023 15th International Conference on Developments in eSystems Engineering (DESE) , 2023-J. pp. 480-485. (2023 15th International Conference on Developments in eSystems Engineering (DESE), 09-12 January 2023, Baghdad & Anbar, Iraq).

Mahyoub, M, Natalia, F, Sudirman, S and Mustafina, J (2023) Sign Language Recognition using Deep Learning. In: Proceedings - 2023 International Conference on Developments in eSystems Engineering(DeSE) , 2023-J. pp. 184-189. (2023 15th International Conference on Developments in eSystems Engineering (DeSE), 9th Jan to 12th Jan 2023, Baghdad and Anbar, Iraq).

Mahyuddin, N, Jamaludin, NM, Hussien, A, Akashah, FW, Azmi, NFB, Cotgrave, A and Riley, M (2022) Assessing the impact of indoor plants towards physical indoor office building environment in hot and humid climates. Journal of Design and Built Environment, 22 (1). pp. 34-54. ISSN 1823-4208

Majdi, HS, Shubbar, AAF, Nasr, MS, Al-Khafaji, ZS, Jafer, H, Abdulredha, M, Al Masoodi, Z, Sadique, MM and Hashim, KS (2020) Experimental data on compressive strength and ultrasonic pulse velocity properties of sustainable mortar made with high content of GGBFS and CKD combinations. Data in Brief. ISSN 2352-3409

Majeed, SS, Othuman Mydin, MA, Bahrami, A, Dulaimi, A, Özkılıç, YO, Omar, R and Jagadesh, P (2024) Development of ultra-lightweight foamed concrete modified with silicon dioxide (SiO2) nanoparticles: Appraisal of transport, mechanical, thermal, and microstructural properties. Journal of Materials Research and Technology, 30. pp. 3308-3327. ISSN 2238-7854

Maklad, O, Theofilis, V and Elsheikh, A (2018) Role of impinging jets in the biomechanical correction of the intraocular pressure ( IOP ) measurement. In: Proceedings of International Conference of Fluid Dynamics (13). (Thirteenth International Conference of Fluid Dynamics, 21 December 2018 - 22 December 2018, Cairo, Egypt).

Maliene, V, Fowles, S, Atkinson, I and Malys, N (2022) A sustainability assessment framework for the high street. Cities, 124. ISSN 0264-2751

Maliene, V, Halleux, JM, Hendricks, A and Nadahl, B (2023) Public Value Capture of Increasing Property Values across Europe. vdf Hochschulverlag AG an der ETH Zürich. ISBN 9783728141477

Maliene, V, Mansberger, R, Paulsson, J, Köhler, T and Seher, W (2024) Sustainable and Equitable Land Management Legal Framework, Planning Tools, Assessment. vdf Hochschulverlag AG. ISBN 9783728141729

Malkeson, S, Alshaaili, S and Chakraborty, N (2023) Numerical investigation of steady state, laminar, natural convection of Bingham fluids in a trapezoidal enclosure heated from the bottom and cooled from the sides. International Journal of Thermofluids, 20. ISSN 2666-2027

Malkeson, SP, Ahmed, U, Turquand d'Auzay, C, Pillai, AL, Chakraborty, N and Kurose, R (2020) Displacement speed statistics in an open turbulent jet spray flame. Fuel, 286 (1). ISSN 0016-2361

Malkeson, SP, Alshaaili, S and Chakraborty, N (2023) Numerical investigation of steady state laminar natural convection of power-law fluids in side-cooled trapezoidal enclosures heated from the bottom. Numerical Heat Transfer; Part A: Applications, 83 (7). pp. 770-789. ISSN 1040-7782

Malkeson, SP and Chakraborty, N (2023) Laminar Natural Convection of Water-Based Alumina Nanofluids in a Square Enclosure. Heat Transfer Engineering, 45 (14). pp. 1173-1189. ISSN 0145-7632

Manewa, R, Anagal, V and Siriwardena, ML (2023) Industry Academia Co-operation for Sustainable Built Environment Ecosystem. In: Going Global Partnerships programmes in Higher Education conference’, 18 September 23, New Delhi, India.

Manewa, R, Satins, M and Siriwardena, M (2023) Causes of Cost Overruns due to Outsourced Labour – Subcontractor’s Perspectives. In: ASC Proceedings 2023 . pp. 707-715. (59th Annual Associated Schools of Construction International Conference, Liverpool, UK).

Manewa, RMAS, Siriwardena, M and Wijekoon, KA (2021) Life Cycle Costing in Construction: Current Trends and Emerging Directions. In: 9th World Construction Symposium . pp. 403-412. (The 9th World Construction Symposium, 9-10th July 2021, Sri Lanka - Online).

Manut, A (2020) Experimental Characterization of Random Telegraph Noise and Hot Carrier Aging of Nano-scale MOSFETs. Doctoral thesis, Liverpool John Moores University.

Mao, Q, Ma, H, Zhang, X and Zhang, G (2018) An Improved Skewness Decision Tree SVM Algorithm for the Classification of Steel Cord Conveyor Belt Defects. Applied Sciences, 8 (12). ISSN 2076-3417

Mao, Q, Zhang, Y, Zhang, X, Zhang, G, Fan, H and Mushayi, K (2020) Accurate Fault Location Method of The Mechanical Transmission System of Shearer Ranging Arm. IEEE Access, 8. pp. 202260-202273. ISSN 2169-3536

Markiewicz, J, Bochenska, A, Kot, P, Lapinski, S and Muradov, M (2022) The Integration of The Multi-Source Data for Multi-Temporal Investigation of Cultural Heritage Objects. In: 2021 14th International Conference on Developments in eSystems Engineering (DeSE) . (The 14th International Conference on the Developments on eSystems Engineering (DeSE2021), 07 December 2021 - 10 December 2021, Sharjah, UAE).

Markiewicz, J, Gorecka, K, Zawieska, D, Zielinski, M, Lapinski, S and Kot, P (2022) The Integration of the Multi-Temporal Conservation Works and Non-Invasive Measurements. In: The International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences . pp. 343-349. (9th Intl. Workshop 3D-ARCH “3D Virtual Reconstruction and Visualization of Complex Architectures, 02 March 2022 - 04 March 2022, Mantova, Italy).

Markiewicz, J, Kowalczyk, M, Karwel, K, Kot, P and Markiewicz, L (2023) The Evaluation of Structure-From-Motion Workflow With the Tls Synthetic Images Simulator – The Cultural Heritage Approach. In: International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives . (29th International CIPA Symposium: Documenting, Understanding, Preserving Cultural Heritage: Humanities and Digital technologies for Shaping the Future, Florence).

Markiewicz, J, Lapinski, S, Bochenska, A and Kot, P (2021) The Reliability Assessment of the TLS Registration Methods - The Case Study of the Royal Castle in Warsaw. In: International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives . ("Imaging today – foreseeing tomorrow", XXIVth ISPRS Congress, 05 July 2021 - 09 July 2021, Nice).

Markiewicz, J, Lapinski, S, Kot, P, Tobiasz, A, Muradov, M, Nikel, J, Shaw, A and Al-Shamma'a, A (2020) The quality assessment of different geolocalisation methods for a sensor system to monitor structural health of monumental objects. Sensors, 2010. ISSN 1424-8220

Markiewicz, J, Tobiasz, A, Kot, P, Muradov, M, Shaw, A and Al-Shamma'a, A (2019) Review of Surveying Devices for Structural Health Monitoring of Cultural Heritage Buildings. In: 2019 12th International Conference on Developments in eSystems Engineering (DeSE) . (12th International Conference on the Developments in eSystems Engineering (DESE2019), 07 October 2019 - 10 October 2019, Kazan, Russia).

Marolt Cebasek, T and Frühwirt, T (2017) Investigation of creep behaviours of gypsum specimens with flaws under different uniaxial loads. Journal of Rock Mechanics and Geotechnical Engineering, 10 (1). pp. 151-163. ISSN 1674-7755

Marolt Cebasek, T and Tom, C (2021) FULL FACE TUNNEL EXCAVATION IN SOILS. Proceedings of the 3rd Annual International Research Symposium –2020. pp. 100-168. ISSN 2659-2061

Marshdi, QSR, Hussien, SA, Mareai, BM, Al-Khafaji, ZS and Shubbar, AAF (2021) Applying of No-fines concretes as a porous concrete in different construction application. Periodicals of Engineering and Natural Sciences (PEN), 9 (4). pp. 999-1012. ISSN 2303-4521

Martin, H, Craigwell, R and Ramjarrie, K (2021) Grit, motivational belief, self-regulated learning (SRL), and academic achievement of civil engineering students. European Journal of Engineering Education. ISSN 0304-3797

Martin, H, Garner, M, Manewa, RMAS and Chadee, A (2024) Validating the relative importance of technology diffusion barriers- Exploring modular construction design-build practices in the UK. International Journal of Construction Education and Research. ISSN 1557-8771

Martinez-Vazquez, P, Gkantou, M and Baniotopoulos, C (2018) Strength and ductility demands on wind turbine towers due to earthquake and wind load. Proceedings of the Institution of Civil Engineers - Structures and Buildings. pp. 1-8. ISSN 0965-0911

Martinez-Vazquez, P, Gkantou, M and Baniotopoulos, C (2017) Strength demands of tall wind turbines subject to earthquakes and wind load. In: Procedia Engineering , 199. pp. 3212-3217. (10th International Conference on Structural Dynamics (EURODYN), 10 September 2017 - 13 September 2017, Sapienza Univ Rome, Fac Civil & Ind Engn, Rome, ITALY).

Matellini, D B (2012) A risk-based fire and rescue management system. Doctoral thesis, Liverpool John Moores University.

Mathew Thevarkattil, A, Yousaf, S, Houacine, C, Khan, W, Bnyan, R, Elhissi, A and Khan, I (2024) Anticancer drug delivery: Investigating the impacts of viscosity on lipid-based formulations for pulmonary targeting. International Journal of Pharmaceutics. ISSN 0378-5173

Matrood, MS, Al-Rifaie, A, Zinkaah, OH and Shubbar, AAF (2021) Behaviour of moment resisting reinforced concrete frames subjected to column removal scenario. IOP Conference Series: Materials Science and Engineering, 1090 (1). ISSN 1757-8981

Mayakuntla, PK, Ganguli, A and Smyl, D (2023) Gaussian Mixture Model-Based Classification of Corrosion Severity in Concrete Structures Using Ultrasonic Imaging. Journal of Nondestructive Evaluation, 42 (2). ISSN 0195-9298

Mayakuntla, PK, Ghosh, D and Ganguli, A (2022) Classification of Corrosion Severity in Concrete Structures Using Ultrasonic Imaging and Linear Discriminant Analysis. Sustainability, 14 (23).

McCabe, P (2022) Diagnostic and Predictive Modelling in Osteoarthritis using Statistical and Machine Learning Tools. Doctoral thesis, Liverpool John Moores University.

McKenzie, LMCS, Lee, D and Amoako-Attah, J (2023) Analysis of Hydrogen Production Methods Using the Analytic Hierarchy Process. Engineering Future Sustainability, 1 (1). ISSN 2753-4693

McLachlan, S, Schafer, B, Dube, K, Kyrimi, E and Fenton, N (2022) Tempting the Fate of the Furious: Cybersecurity and autonomous cars. International Review of Law, Computers & Technology. ISSN 1360-0869

McLoughlin, B (2020) Quantitative Analysis of Non-Linear Probabilistic State Estimation Filters for Deployment on Dynamic Unmanned Systems. Doctoral thesis, Liverpool John Moores University.

Megdiche, I (2019) Evaluation of the Mechanical Strength of Bund Walls under the Catastrophic Failure of Storage Tanks via Fluid Structure Interaction. Doctoral thesis, Liverpool John Moores University.

Megdiche, I, Atherton, W, Allanson, D and Harris, C (2022) Effect of mitigation on the catastrophic failure of storage tanks. Journal of Loss Prevention in the Process Industries, 80. pp. 1-14. ISSN 0950-4230

Mehedi, M (2022) Characterisation and modelling of Random Telegraph Noise in nanometre devices. Doctoral thesis, Liverpool John Moores University.

Mehedi, M, Tok, KH, Ye, Z, Zhang, JF, Ji, Z, Zhang, WD and Marsland, J (2021) On the accuracy in modelling the statistical distribution of Random Telegraph Noise Amplitude. IEEE Access. ISSN 2169-3536

Mehedi, M, Tok, KH, Zhang, JF, Ji, Z, Ye, Z, Zhang, WD and Marsland, J (2021) An integrated method for extracting the statistical distribution of RTN time constants. In: 2021 IEEE 14th International Conference on ASIC (ASICON) . (IEEE 14th International Conference on ASIC (ASICON), 26 October 2021 - 29 October 2021, Kunming, China (Online)).

Mehedi, M, Tok, KH, Zhang, JF, Ji, Z, Ye, Z, Zhang, WD and Marsland, JS (2020) An assessment of the statistical distribution of Random Telegraph Noise Time Constants. IEEE Access, 8. pp. 182273-182282. ISSN 2169-3536

Meraghni, L (1997) An integrated information model for construction materials management. Doctoral thesis, Liverpool John Moores University.

Mesquita, GP, Rodríguez-Teijeiro, JD, De Oliveira, RR and Mulero-Pázmány, M (2021) Steps to build a DIY low-cost fixed-wing drone for biodiversity conservation. PLoS One, 16 (8). ISSN 1932-6203

Messina, M (2022) An Intelligent Hydrocephalus shunt: a New Concept. In: 2021 14th International Conference on Developments in eSystems Engineering (DeSE) . (2021 14th International Conference on Developments in eSystems Engineering (DeSE), Sharjah, United Arab Emirates).

Miao, W, Liu, Q, Zhang, Q, Xu, Z, Li, C, Yue, M, Zhang, W and Ye, Z (2022) Recommendation for strut designs of vertical axis wind turbines: Effects of strut profiles and connecting configurations on the aerodynamic performance. Energy Conversion and Management, 276. ISSN 0196-8904

Mior Sani, WNH, Jaya, RP, Masri, KA, Saptaji, K and Dulaimi, A (2024) Exploring the chemical properties and microstructural characterisations of hybrid asphalt binders for enhanced performance. Discover Applied Sciences, 6 (4).

Mirza, WIIWI, Rani, MNA, Yunus, MA, Stancioiu, D and Shripathi, V (2021) Estimating Rotational Frequency Response Function Using Mode Expansion and Frequency Response Function Synthesis Method. International Journal of Automotive and Mechanical Engineering, 18 (2). pp. 8738-8750. ISSN 2229-8649

Mitchell, I (2019) TYPuzzle web application. I.Mitchell.

Mohamad Zaimi, NS, Mohd Salleh, MAA, Abdullah, MMAB, Ahmad, R, Mostapha, M, Yoriya, S, Chaiprapa, J, Zhang, G and Harvey, DM (2020) Effect of kaolin geopolymer ceramic addition on the properties of Sn-3.0Ag-0.5Cu solder joint. Materials Today Communications, 25. ISSN 2352-4928

Mohammad, FA (1998) Analysis and design of the LR55 track system. Doctoral thesis, Liverpool John Moores University.

Mohammed, H (2023) Development of chloride resistant self-healing concrete with bio-agent immobilised polymer. Doctoral thesis, Liverpool John Moores University.

Mohammed, H, Giuntini, F, Simm, A, Sadique, M, Shaw, A, Nakouti, I and Bras, A (2023) Biomineralisation to improve properties of polymer modified concrete for chloride environments. Construction and Building Materials, 379. ISSN 0950-0618

Mohammed, H, Sadique, MM, Shaw, A and Brás, A (2020) The Influence of Incorporating Plastic within Concrete and the Potential Use of Microwave Curing; A Review. Journal of Building Engineering, 32. ISSN 2352-7102

Mohammed, SJ, Zubaidi, SL, Al-Ansari, N, Mohammed Ridha, H, Dulaimi, A and Al-Khafaji, R (2023) Application of Metaheuristic Algorithms and ANN Model for Univariate Water Level Forecasting. Advances in Civil Engineering, 2023. pp. 1-15. ISSN 1687-8086

Mohammed, SJ, Zubaidi, SL, Ortega-Martorell, S, Al-Ansari, N, Ethaib, S and Hashim, K (2022) Application of hybrid machine learning models and data pre-processing to predict water level of watersheds: Recent trends and future perspective. Cogent Engineering, 9 (1).

Mohammed, T, Murphy, MF, Lilley, F, Burton, DR and Bezombes, F (2016) The effects of acoustic vibration on fibroblast cell migration. Materials Science and Engineering C, 69. pp. 1256-1262. ISSN 1873-0191

Mohan, N, Ahuir-Torres, JI, Bhogaraju, SK, Webler, R, Kotadia, HR, Erdogan, H and Elger, G (2024) Decomposition mechanism and morphological evolution of in situ realized Cu nanoparticles in Cu complex inks. New Journal of Chemistry, 48 (15). pp. 6796-6808. ISSN 1144-0546

Mohd Mansor, MS, Raja, S, Yusof, F, Muhamad, MR, Manurung, YHP, Adenan, MS, Hussein, NIS and Ren, J (2024) Integrated approach to Wire Arc Additive Manufacturing (WAAM) optimization: Harnessing the synergy of process parameters and deposition strategies. Journal of Materials Research and Technology, 30. pp. 2478-2499. ISSN 2238-7854

Mohsendokht, M, Li, H, Kontovas, C, Chang, C-H, Qu, Z and Yang, Z (2024) Decoding dependencies among the risk factors influencing maritime cybersecurity: Lessons learned from historical incidents in the past two decades. Ocean Engineering, 312 (1). ISSN 0029-8018

Mohsendokht, M, Li, H, Kontovas, C, Chang, CH, Qu, Z and Yang, Z (2024) Enhancing maritime transportation security: A data-driven Bayesian network analysis of terrorist attack risks. Risk Analysis. ISSN 0272-4332

Moore, AM, Holt, R and Beckett, A (2014) The Emergent Role of the Social Designer. In: Proceedings of the 19th DMI: Academic Design Management Conference (Design). pp. 1971-1987. (The 19th DMI: Academic Design Management Conference, 02 September 2014 - 04 September 2014, London College of Fashion).

Morgan, M N (1995) Modelling for the prediction of thermal damage in grinding. Doctoral thesis, Liverpool John Moores University.

Moruzzi, JJ (2016) Design of a Modern, Low Cost, Expandable, Open Architecture Grinding Machine Control System. Masters thesis, Liverpool John Moores University.

Mousazadeh, M, Ashoori, R, Paital, B, Kabdaslı, I, Frontistis, Z, Hashemi, M, Sandoval, MA, Sherchan, S, Das, K and Emamjomeh, MM (2021) Wastewater based epidemiology perspective as a faster protocol for detecting coronavirus rna in human populations: A review with specific reference to sars-cov-2 virus. Pathogens, 10 (8).

Mousazadeh, M, Paital, B, Naghdali, Z, Mortezania, Z, Hashemi, M, Karamati Niaragh, E, Aghababaei, M, Ghorbankhani, M, Lichtfouse, E, Sillanpää, M, Hashim, KS and Emamjomeh, MM (2021) Positive environmental effects of the coronavirus 2020 episode: a review. Environment, Development and Sustainability. ISSN 1387-585X

Mousazadehgavan, M, Khademi, S, Naeini, AM, Yoosefdoost, I, Vashisht, V, Hashemi, M, Manouchehri, M and Hashim, K (2024) Fate of micro- and nanoplastics in water bodies: A critical review of current challenges, the next generation of advanced treatment techniques and removal mechanisms with a special focus on stormwater. Journal of Water Process Engineering, 67.

Mońka, D, Pyne, R, Paraskevadakis, D and Bury, A (2021) The development of intermodal freight transport in Poland from 2007 to 2016: Barriers and opportunities to its further development. International Journal for Traffic and Transport Engineering, 11 (1). pp. 161-183. ISSN 2217-544X

Mu, B, Bin Guo, F, Yang, Z and Jenkinson, I (2023) Interface And Interaction: The Symbolic Design for Bridge Conning System. In: Cognitive Computing and Internet of Things , 73. pp. 202-211. (14th International Conference on Applied Human Factors and Ergonomics (AHFE 2023), 20-24 July 2023, Hybrid Event, San Francisco, California, USA).

Mualam, N, Hendricks, A, Maliene, V and Salinger, E (2021) Value Capture and Vertical Allocations of Public Amenities. Sustainability, 13 (7). ISSN 2071-1050

Mulliner, E, Khumpaisal, S and Chen, Z (2012) Applying the Analytical Risk Assessment Method for an Urban Regeneration Project. In: Proceedings of Built Environment Research Associates Conference . (Built Environment Research Associates Conference, BERAC 3, 25 May 2012 - 25 May 2012, Thailand).

Muradov, M, Kot, P, Markiewicz, J, Łapiński, S, Tobiasz, A, Onisk, K, Shaw, A, Hashim, KS, Zawieska, D and Mohi-Ud-din, G (2022) Non-Destructive System for In-Wall Moisture Assessment of Cultural Heritage Buildings. Measurement, 203. ISSN 0263-2241

Murphy, MF, Irving, M, Morgan, M, Lilley, F, French, PW, Burton, DR and Moran, P (2016) Machine grinding as an alternative method for creating functional surfaces for controlling cell behaviour. The International Journal of Advanced Manufacturing Technology. ISSN 1433-3015

Murtiyoso, A, Markiewicz, J, Karwel, AK, Grussenmeyer, P and Kot, P (2024) Comparison of state-of-the-art Multi-view stereo solutions for close range heritage documentation. In: ISPRS International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences , XLVIII. pp. 317-323. (10th International Workshop 3D-ARCH "3D Virtual Reconstruction and Visualization of Complex Architectures" workshop, 21-23 February 2024, Siena, Italy).

Murtiyoso, A, Markiewicz, J, Karwel, AK and Kot, P (2023) INVESTIGATION ON THE USE OF NeRF FOR HERITAGE 3D DENSE RECONSTRUCTION FOR INTERIOR SPACES. In: International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives , XLVIII. pp. 115-121. (2nd International Workshop on Evaluation and Benchmarking of Sensors, Systems and Geospatial Data in Photogrammetry and Remote Sensing, 23rd October - 24th October 2023, Krakow, Poland).

Mustafa, S, Hameed, MA and Dulaimi, AF (2022) Evaluation of the properties of modified local asphalt binder by using styrene butadiene rubber (SBR) or low-density polyethylene (LDPE). Scientific Review Engineering and Environmental Studies (SREES), 31 (3). pp. 190-202.

Muzamhindo, H and Ferentinou, M (2023) Generic compressional strength prediction model applicable to multiple lithologies based on a broad global database. Probabilistic Engineering Mechanics, 71. ISSN 0266-8920

Mycroft, W, Katzman, M, Tammas-Williams, S, Hernandez-Nava, E, Panoutsos, G, Todd, I and Kadirkamanathan, V (2020) A data-driven approach for predicting printability in metal additive manufacturing processes. Journal of Intelligent Manufacturing. ISSN 0956-5515

Mydin, MAO, Abdullah, MMAB, Hamah Sor, N, Omar, R, Dulaimi, A, Awoyera, PO, Althoey, F and Deifalla, AF (2023) Thermal conductivity, microstructure and hardened characteristics of foamed concrete composite reinforced with raffia fiber. Journal of Materials Research and Technology, 26. pp. 850-864. ISSN 2238-7854

Mydin, MAO, Al Bakri Abdullah, MM, Omar, R, Dulaimi, A, Ibrahim, WMW, Jeż, B and Nabiałek, M (2024) Optimization of mechanical properties of raw agave fibre-reinforced lightweight foamed concrete. Archives of Metallurgy and Materials, 69 (2). pp. 753-759. ISSN 1733-3490

Mydin, MAO, Jagadesh, P, Bahrami, A, Dulaimi, A, Özkılıç, YO, Abdullah, MMAB and Jaya, RP (2023) Use of calcium carbonate nanoparticles in production of nano-engineered foamed concrete. Journal of Materials Research and Technology, 26. pp. 4405-4422. ISSN 2238-7854

Mydin, MAO, Majeed, SS, Bahrami, A, Dulaimi, A, Özkılıç, YO, Omar, R, Abdullah, MMAB, Palanisamy, J and Awoyera, PO (2024) Study on freshness, morphology, strength, and durability properties of foamed concrete reinforced with agave fiber. Journal of Engineered Fibers and Fabrics, 19.

Mydin, MAO, Sor, NH, Bahrami, A, Dulaimi, A, Palanisamy, J, Omar, R and Abdullah, MMAB (2024) Application of treated sugarcane bagasse fiber in lightweight foamed concrete composites and its influence on strength properties and thermal conductivity. Journal of Engineered Fibers and Fabrics, 19. pp. 1-14.

N

Nabulsi, Y A (1987) Control of the irrigation water resources of the Al-Hasa oasis. Doctoral thesis, Liverpool John Moores University.

Naghipour, D, Taghavi, K, Jaafari, J, Hashim, KS, Javan Mahjoub Doust, F and Mahjoub Doust, MJ (2022) Evaluation of the efficacy of Fe2O3 magnetised kaolin: Simultaneous removal of ceftriaxone and cefixime from aqueous media. International Journal of Environmental Analytical Chemistry. pp. 1-18. ISSN 0306-7319

Najim, FT, Bahlekeh, A, Mohammed, HI, Dulaimi, A, Abed, AM, Ibrahem, RK, Al-Qrimli, FA, Mahmoud, MZ, Awrejcewicz, J and Pawłowski, W (2022) Evaluation of Melting Mechanism and Natural Convection Effect in a Triplex Tube Heat Storage System with a Novel Fin Arrangement. Sustainability, 14 (17). ISSN 2071-1050

Nanyam, VPSN, Basu, R, Sawhney, A, Vikram, H and Lodha, G (2017) Implementation of Precast Technology in India–Opportunities and Challenges. In: Procedia Engineering , 196. pp. 144-151. (Creative Construction Conference 2017, 19 June 2017 - 22 June 2017, Primosten, Croatia).

Nanyam, VPSN, Sawhney, A and Gupta, PA (2017) Evaluating Offsite Technologies for Affordable Housing. In: Procedia Engineering , 196. pp. 135-143. (Creative Construction Conference 2017, 19 June 2017 - 22 June 2017, Primosten, Croatia).

Naser, MH, Falah, MW, Naser, FH, Nasr, MS, Hashim, TM and Shubbar, A (2024) The effect of industrial and waste fibres on concrete strength and structural behaviour of rc short columns. IIUM Engineering Journal, 25 (1). pp. 87-101. ISSN 1511-788X

Nasir, MJ, Abdulhasan, MJ, Ridha, SZA, Hashim, KS and Jasim, HM (2022) Statistical assessment for performance of Al-Mussaib drinking water treatment plant at the year 2020. Water Practice and Technology. ISSN 1751-231X

Nasr, MS, Ali, IM, Hussein, AM, Shubbar, AAF, Kareem, QT and AbdulAmeer, AT (2020) Utilization of locally produced waste in the production of sustainable mortar. Case Studies in Construction Materials, 13. ISSN 2214-5095

Nasr, MS, Hasan, ZA, Abed, MK, Dhahir, MK, Najim, WN, Shubbar, AAF and Habeeb, ZD (2020) Utilization of High Volume Fraction of Binary Combinations of Supplementary Cementitious Materials in the Production of Reactive Powder Concrete. Periodica Polytechnica Civil Engineering. ISSN 0553-6626

Nasr, MS, Hussain, T, Kubba, H and Shubbar, AAF (2020) Influence of Using High Volume Fraction of Silica Fume on Mechanical and Durability Properties of Cement Mortar. Journal of Engineering Science and Technology, 15 (4). pp. 2494-2506. ISSN 1823-4690

Nasr, MS, Salih, MA, Shubbar, A, Falah, MW and Abadel, AA (2024) Influence of mechanical activation on the behavior of green high-strength mortar including ceramic waste. Materials Science-Poland, 41 (4). pp. 41-56.

Nasr, MS, Salman, AJ, Ghayyib, RJ, Shubbar, A, Al-Mamoori, S, Al-khafaji, Z, Hashim, TM, Hasan, ZA and Sadique, MM (2023) Effect of Clay Brick Waste Powder on the Fresh and Hardened Properties of Self-Compacting Concrete: State-of-the-Art and Life Cycle Assessment. Energies, 16 (12).

Nasr, MS, Shubbar, A, Hashim, TM and Abadel, AA (2023) Properties of a Low-Carbon Binder-Based Mortar Made with Waste LCD Glass and Waste Rope (Nylon) Fibers. Processes, 11 (5).

Naylor, A (2014) Evaluating the Cutting Mechanics of Woodworking Hand-Saw Teeth. International Journal of Materials, Mechanics and Manufacturing, 2 (2). pp. 113-116. ISSN 1793-8198

Naylor, A and Hackney, P (2013) A Review of Wood Machining Literature with a Special Focus on Sawing. BioResources, 8 (2). pp. 3122-3125.

Naylor, A, Hackney, P, Perera, N and Clahr, E (2012) A predictive model for the cutting force in wood machining developed using mechanical properties. BioResources, 7 (3). pp. 2883-2894. ISSN 1930-2126

Naylor, A, Talwalkar, S, Trail, I and Joyce, T (2016) Evaluating the Surface Topography of Pyrolytic Carbon Finger Prostheses through Measurement of Various Roughness Parameters. Journal of Functional Biomaterials, 7 (2). ISSN 2079-4983

Naylor, A, Talwalkar, S, Trail, I and Joyce, T (2015) In Vitro Wear Testing of a CoCr-UHMWPE Finger Prosthesis with Hydroxyapatite Coated CoCr Stems. Lubricants, 3 (2). ISSN 2075-4442

Nazari, A, Nejat, A and Shahrokhi, A (2021) Investigation of the Floating Offshore Wind Turbine Blade Deformation in a Two-way Fluid Structure Interaction. In: Electric City 2021 . (Electric City 2021, 23 November 2021 - 25 November 2021, Copenhagen).

Nesensohn, C, Bryde, DJ, Fearon, DJ and Ochieng, EG (2014) Maturity and maturity models in lean construction. Australasian Journal of Construction Economics and Building, 1 (14). pp. 45-59. ISSN 1835-6354

Ng, AKY, Zhang, H, Afenyo, M, Becker, A, Cahoon, S, Chen, S-L, Esteban, M, Ferrari, C, Lau, Y-Y, Lee, PT-W, Monios, J, Tei, A, Yang, Z and Acciaro, M (2018) Port Decision Maker Perceptions on the Effectiveness of Climate Adaptation Actions. Coastal Management, 46 (3). pp. 148-175. ISSN 0892-0753

Nguyen, Q (2020) INTELLIGENT ALGORITHMS FOR HIGH ACCURACY INDOOR POSITIONING AND TRACKING. Doctoral thesis, Liverpool John Moores University.

Nguyen, TT, Le, AD, Hoang, HT and Nguyen, T (2021) NEU-chatbot: Chatbot for admission of National Economics University. Computers and Education: Artificial Intelligence, 2. ISSN 2666-920X

Nieves, MJ, Carta, G, Jones, IS, Movchan, AB and Movchan, N (2018) Vibrations and elastic waves in chiral multi-structures. Journal of the Mechanics and Physics of Solids, 121. pp. 387-408. ISSN 0022-5096

Nieves, MJ, Maz'ya, V and Movchan, A (2016) Mesoscale models and approximate solutions for solids containing clouds of voids. SIAM: Multiscale Modeling and Simulation, 14 (1). pp. 138-172. ISSN 1540-3467

Nieves, MJ, Mishuris, GS and Slepyan, LI (2016) Analysis of dynamic damage propagation in discrete beam structures. International journal of Solids and Structures. ISSN 0020-7683

Nikitas, G and Bhattacharya, S (2023) Experimental study on sand-tire chip mixture foundations acting as a soil liquefaction countermeasure. Bulletin of Earthquake Engineering. ISSN 1570-761X

Niu, D, Zhang, Z, Gao, Y, Li, Y, Yang, Z and Niu, Y (2023) Effect of pretreated cow dung fiber on rheological and fatigue properties of asphalt binder. Cellulose, 30. pp. 3773-3791. ISSN 0969-0239

Novoth, S, Zhang, Q, Ji, K and Yu, DL (2020) Distributed Formation Control for Multi-Vehicle Systems With Splitting and Merging Capability. IEEE Control Systems Letters, 5 (1). pp. 355-360. ISSN 2475-1456

Nuseeb, M, Koussa, M, Matshidze, L, Umeokafor, N and Windapo, A (2021) Client Characteristics related Critical Success Factors for Public-Private Partnerships in South Africa. International Journal of Construction Supply Chain Management, 11 (1). pp. 49-68. ISSN 1179-0776

O

Obaid, HA, Hashim, TM, Al-Abody, AAM, Nasr, MS, Abbas, GH, Kadhim, AM and Sadique, M (2022) Properties of Modified Warm-Mix Asphalt Mixtures Containing Different Percentages of Reclaimed Asphalt Pavement. Energies, 15 (20). ISSN 1996-1073

Obaid, MK, Nasr, MS, Ali, IM, Shubbar, AAF and Hashim, KS (2021) Performance of Green Mortar Made From Locally Available Waste Tiles and Silica Fume. Journal of Engineering Science and Technology, 16 (1). pp. 136-151. ISSN 1823-4690

Ogbomo, OO, Amalu, EH, Ekere, NN and Olagbegi, PO (2017) Effect of Coefficient of Thermal Expansion (CTE) Mismatch of Solder Joint Materials in Photovoltaic (PV) Modules Operating in Elevated Temperature Climate on the Joint's Damage. Procedia Manufacturing, 11. pp. 1145-1152. ISSN 2351-9789

Ogbomo, OO, Amalu, EH, Ekere, NN and Olagbegi, PO (2018) Effect of operating temperature on degradation of solder joints in crystalline silicon photovoltaic modules for improved reliability in hot climates. Solar Energy, 170. pp. 682-693. ISSN 0038-092X

Ojuri, O, Mills, G and Seidu, RD (2021) How can value co-creation create social value as management practice for sustainable water supply projects? In: Proceedings of IDoBE . (Proceedings of Centre for the Integrated Delivery of the Built Environment (IDoBE) on Uncertainties in the Built Environment: How can we build a resilient future in the new normal? LSBU, London. UK 21 - 23 Nov 2021, 21 November 2021 - 23 November 2021, LSBU, London. UK 21 - 23 Nov 2021).

Ojuri, O, Mills, GRW and Opoku, A (2023) Exploring social value and their enablers as business models for sustainable water supply projects. Built Environment Project and Asset Management. ISSN 2044-124X

Ojuri, O and Morgan, O (2019) The Effects of Transaction Costs on Investor Sentiment: Evidence from the Nigerian Electricity Service Industry. Civil Engineering Research Journal, 8 (4). ISSN 2575-8950

Ojuri, OO, Olowoselu, AS, Akinrele, J, Ayodele, FO and Jayejeje, OO (2024) Sustainable integrated solid waste management for a university campus − A case study of the Federal University of Technology Akure (FUTA), Nigeria. Waste Management Bulletin, 2 (2). pp. 161-170. ISSN 2949-7507

Ojuri, OO, Osagie, PO, Oluyemi-Ayibiowu, BD, Fadugba, OG, Tanimola, MO, Chauhan, VB and Jayejeje, OO (2022) Eco-friendly stabilization of highway lateritic soil with cow bone powder admixed lime and plastic granules reinforcement. Cleaner Waste Systems, 2. ISSN 2772-9125

Ojuri, OO, Ramdas, V, Aderibigbe, EA, Williams, CG, Ramchuran, S and Al-Nageim, H (2022) Improving strength and hydraulic characteristics of regional clayey soils using biopolymers. Case Studies in Construction Materials, 17. ISSN 2214-5095

Oluwajobi, AO and Chen, X (2017) On Time Step in the Molecular Dynamics (MD) Simulation of Nanomachining. Solid State Phenomena, 261. pp. 108-114. ISSN 1012-0394

Omer, G, Kot, P, Atherton, W, Muradov, M, Gkantou, M, Shaw, A, Riley, ML, Hashim, KS and Al-Shamma'a, A (2021) A Non-Destructive Electromagnetic Sensing Technique to Determine Chloride Level in Maritime Concrete. Karbala International Journal of Modern Science, 7 (1). pp. 61-71. ISSN 2405-609X

Omoregie, AI, Alhassan, M, Basri, HF, Muda, K, Campos, LC, Ojuri, P and Ouahbi, T (2024) Bibliometric analysis of research trends in biogranulation technology for wastewater treatment. Environmental Science and Pollution Research. ISSN 0944-1344

Omoregie, AI, Muda, K, Ojuri, OO, Hong, C, Pauzi, F and Ali, N (2022) The global research trend on microbially induced carbonate precipitation during 2001–2021: a bibliometric review. Environmental Science and Pollution Research. ISSN 0944-1344

Omoregie, AI, Muda, K, Ong, DEL, Ojuri, OO, Bin Bakri, MK, Rahman, MR, Basri, HF and Ling, YE (2023) Soil bio-cementation treatment strategies: state-of-the-art review. Geotechnical Research. pp. 1-25.

Omoregie, AI, Ong, DEL, Alhassan, M, Basri, HF, Muda, K, Ojuri, OO and Ouahbi, T (2024) Two decades of research trends in microbial-induced carbonate precipitation for heavy metal removal: a bibliometric review and literature review. Environmental Science and Pollution Research. ISSN 0944-1344

Omran, II, Al-Saati, N, Hashim, K, Al-Saati, Z, Kot, P, Al Khaddar, RM, Al-Jumeily, D, Shaw, A, Ruddock, F and Aljefery, M (2019) Assessment of heavy metal pollution in the Great Al-Mussaib irrigation channel. Desalination and Water Treatment, 168. pp. 165-174. ISSN 1944-3986

Omran, II, Al-Saati, NH, Al-Saati, HH, Hashim, KS and Al-Saati, ZN (2021) Sustainability assessment of wastewater treatment techniques in urban areas of Iraq using multi-criteria decision analysis (MCDA). Water Practice and Technology. ISSN 1751-231X

Oo, P, Ren, J, Halog, A and Prapaspongsa, T (2021) Framework for the Development of Thai Normalisation Factors for Life Cycle Assessment in Thailand. Thai Environmental Engineering Journal, 35 (3). pp. 69-79. ISSN 1686-2961

Oon, CS (2017) Non-invasive electromagnetic wave sensor for flow measurement and biphase application. Doctoral thesis, Liverpool John Moores University.

Oon, CS, Amiri, A, Chew, BT, Kazi, SN, Shaw, A and Al-Shamma'a, A (2018) Increase in Convective Heat Transfer over A Backward-Facing Step Immersed in A Water-Based Tio2 Nanofluid. Heat Transfer Research, 49 (15). pp. 1419-1429. ISSN 1064-2285

Oon, CS, Ateeq, M, Shaw, A, Wylie, S, Al-Shamma'a, A and Kazi, SN (2016) Detection of the gas–liquid two-phase flow regimes using non-intrusive microwave cylindrical cavity sensor. Journal of Electromagnetic Waves and Applications, 30 (17). pp. 2241-2255. ISSN 0920-5071

Opoz, T, Burgess, A, Ahuir Torres, J, Kotadia, HR and Tammas-Williams, S (2024) The effect of surface finish and post-processing on mechanical properties of 17-4 PH stainless steel produced by the atomic diffusion additive manufacturing process (ADAM). International Journal of Advanced Manufacturing Technology, 130. pp. 4053-4066. ISSN 0268-3768

Opoz, TT and Chen, X (2014) Experimental study on single grit grinding of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ISSN 2041-2975

Opoz, TT, Yasar, H, Ekmekci, N and Ekmekci, B (2018) Particle Migration and Surface Modification on Ti6Al4V in SiC Powder Mixed Electrical Discharge Machining. Journal of Manufacturing Processes, 31. pp. 744-758. ISSN 1526-6125

Opoz, TT, Yasar, H, Murphy, MF, Ekmekci, N and Ekmekci, B (2019) Ti6Al4V Surface Modification by Hydroxyapatite Powder Mixed Electrical Discharge Machining for Medical Application. International Journal of Advances in Engineering and Pure Sciences, 31. pp. 1-10. ISSN 2146-5150

Oraith, H, Blanco Davis, E, Yang, Z and Matellini, DB (2021) An Evaluation of the Effects of Human Factors on Pilotage Operations Safety. Journal of Marine Science and Application, 20. pp. 393-409. ISSN 1671-9433

Orr, J, Brás, A and Ibell, T (2017) Effectiveness of design codes for life cycle energy optimisation. Energy and Buildings, 140. pp. 61-67. ISSN 0378-7788

Othuman Mydin, MA, Jagadesh, P, Bahrami, A, Dulaimi, A, Onuralp Özkılıç, Y and Omar, R (2024) Enhanced fresh and hardened properties of foamed concrete modified with nano-silica. Heliyon, 10 (4). ISSN 2405-8440

Othuman Mydin, MA, Mohd Nawi, MN, Omar, R, Dulaimi, A, Najm, HM, Mahmood, S and Sabri Sabri, MM (2023) Mechanical, durability and thermal properties of foamed concrete reinforced with synthetic twisted bundle macro-fibers. Frontiers in Materials, 10.

Oyegoke, AS, Fisher, BW, Ajayi, S, Omotayo, TS and Ewuga, D (2023) The disruptive factors and longevity effects of Covid-19 and Brexit on the SMEs construction supply chain in the UK. Journal of Financial Management of Property and Construction. ISSN 1366-4387

P

Paital, B, Das, K, Malekdar, F, Sandoval, MA, Niaragh, EK, Frontistis, Z, Behera, TR, Balacco, G, Sangkham, S, Hati, AK and Mousazadeh, M (2022) A State-of-the-Art Review on SARS-CoV-2 Virus Removal Using Different Wastewater Treatment Strategies. Environments, 9 (9).

Pannozzo, N, Leonardi, N, Carnacina, I and Smedley, R (2021) Dataset of results from numerical simulations of increased storm intensity in an estuarine salt marsh system. Data in Brief, 38. ISSN 2352-3409

Pannozzo, N, Smedley, RK, Chiverrell, RC, Carnacina, I and Leonardi, N (2022) An Integration of Numerical Modeling and Paleoenvironmental Analysis Reveals the Effects of Embankment Construction on Long‐Term Salt Marsh Accretion. Journal of Geophysical Research: Earth Surface, 127 (5). ISSN 2169-9003

Papageorgiou, P (2022) A Novel Framework for Maritime Security Assessments and its Applications on the Shipping Industry. Cyber security examples. Other thesis, Liverpool John Moores University.

Park, C (2024) CYBERSECURITY RISK ASSESSMENT IN THE MARITIME INDUSTRY. Doctoral thesis, Liverpool John Moores University.

Park, C, Kontovas, C, Yang, Z and Chang, C-H (2023) A BN driven FMEA approach to assess maritime cybersecurity risks. Ocean and Coastal Management, 235. ISSN 0964-5691

Partida-Manzanera, T, Zaidi, ZH, Roberts, JW, Dolmanan, SB, Lee, KB, Houston, PA, Chalker, PR, Tripathy, S and Potter, RJ (2019) Comparison of atomic layer deposited Al2O3 and (Ta2O5)0.12(Al2O3)0.88 gate dielectrics on the characteristics of GaN-capped AlGaN/GaN metal-oxide-semiconductor high electron mobility transistors. Journal of Applied Physics, 126 (3). ISSN 0021-8979

Peng, G, Sun, Y, Zhang, Q, Yang, Q and Shen, W (2021) A collaborative design platform for new alloy material development. Advanced Engineering Informatics, 51. ISSN 1474-0346

Pereira, M, Deuermeier, J, Zhang, WD, Freitas, P, Barquinha, P, Martins, R, Fortunato, E and Kiazadeh, A (2022) Tailoring the synaptic properties of a-IGZO memristors for artificial deep neural networks. APL Materials, 10. ISSN 2166-532X

Pillay, A (2001) Formal safety assessment of fishing vessels. Doctoral thesis, Liverpool John Moores University.

Pointon, HAG, McLoughlin, BJ, Matthews, C and Bezombes, F (2019) Towards a Model Based Sensor Measurement Variance Input for Extended Kalman Filter State Estimation. Drones, 3 (1). ISSN 2504-446X

Pontes, P, Gonçalves, I, Andredaki, M, Georgoulas, A, Moreira, ALN and Moita, AS (2022) Fluid flow and heat transfer in microchannel devices for cooling applications: Experimental and numerical approaches. Applied Thermal Engineering, 218. ISSN 1359-4311

Pontes, P, Martins, L, Gonçalves, I, Manetti, L, Andredaki, M, Georgoulas, A, Moreira, ALN and Moita, AS (2021) Fluid flow and heat transfer in microchannel devices for cooling applications: experimental and numerical approaches. In: PROCEEDINGS 15th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics . (ATE-HEFAT 2021, 15th international conference on heat transfer, fluid mechanics and thermodynamics, 25-28 July 2021, Virtual Conference).

Poo, C, Yang, Z, Dimitriu, D and Qu, Z (2019) Climate adaptation for airports by climate change risk indicators (CCRI). In: Proceedings of the International Forum on Shipping, Ports and Airports (IFSPA) 2019 . pp. 268-280. (IFSPA 2019 conference, 20 May 2019 - 24 May 2019, HongKong).

Poo, MC-P, Lau, Y-Y, Qi, B and Pun, CF-K (2024) Sustainable Ground Transportation and the E-Commerce Revolution: Innovations and Challenges at the Intersection. Encyclopedia, 4 (1). pp. 201-214.

Poo, MC-P, Yang, Z, Dimitriu, D and Qu, Z (2021) An advanced climate resilience indicator framework for airports: A UK case study. Transportation Research Part D: Transport and Environment, 101. ISSN 1361-9209

Poo, MCP, Lau, YY and Chen, Q (2023) Are Virtual Laboratories and Remote Laboratories Enhancing the Quality of Sustainability Education? Education Sciences, 13 (11).

Poo, MCP and Yang, Z (2022) Optimising the resilience of shipping networks to climate vulnerability. Maritime Policy and Management. pp. 1-20. ISSN 0308-8839

Poo, MCP, Yang, Z, Lau, YY and Jarumaneeroj, P (2024) Assessing the impact of Arctic shipping routes on the global container shipping network’s connectivity. Polar Geography, 47 (3). pp. 219-239. ISSN 1088-937X

Pristrom, S, Yang, Z, Wang, J and Yan, X (2016) A novel flexible model for piracy and robbery assessment of merchant ship operations. RELIABILITY ENGINEERING & SYSTEM SAFETY, 155. pp. 196-211. ISSN 0951-8320

Psaraftis, HN and Kontovas, CA (2020) Decarbonization of Maritime Transport: Is There Light at the End of the Tunnel? Sustainability, 13 (1). ISSN 2071-1050

Purumal, K, Ali, AS, Zakaria, N and Baaki, TK (2021) Systematic literature review on green maintenance principles and maintenance performance indicators for green buildings design. Journal of Design and Built Environment, 21 (2). pp. 59-75. ISSN 1823-4208

Q

Qaidi, S, Al-Kamaki, Y, Hakeem, I, Dulaimi, AF, Özkılıç, Y, Sabri, M and Sergeev, V (2023) Investigation of the physical-mechanical properties and durability of high-strength concrete with recycled PET as a partial replacement for fine aggregates. Frontiers in Materials, 10.

Qapo, M, Dirar, S and Jemaa, Y (2016) Finite element parametric study of reinforced concrete beams shear-strengthened with embedded FRP bars. Composite Structures, 149. pp. 93-105. ISSN 0263-8223

Qi, A, Zhang, G, Dong, M, Ma, H-W and Harvey, D (2018) An artificial bee colony optimization based matching pursuit approach for ultrasonic echo estimation. Ultrasonics, 88. ISSN 0041-624X

Qiang, M, Yu, B, Feng, J and Edwards, G (2019) Compare PID and PDF Control in 2 Degree of Freedom Robotic Manipulator. In: Proceedings of the 2019 International Conference on Precision Machining, Non-Traditional Machining and Intelligent Manufacturing (PNTIM 2019) . (Proceedings of the 2019 International Conference on Precision Machining, Non-Traditional Machining and Intelligent Manufacturing (PNTIM 2019), China).

Qing, X, Kaid, T, Yildizand, C, Ates, F, Herencia, VZ, Wang, L, Mehmet, G and Ren, J (2023) Integrated Data-Led Studies of Electrical Resistance Spot Welded Joints. In: Intelligent Systems in Production Engineering and Maintenance III Conference Proceedings . pp. 120-130. (International Conference on Intelligent Systems in Production Engineering and Maintenance, 13-15 September 2023, Wrocław, Poland).

Qiu, Z, Lu, Y and Qiu, Z (2022) Review of Ultrasonic Ranging Methods and Their Current Challenges. Micromachines, 13 (4). ISSN 2072-666X

Qu, J, Ge, X and Chang, J (2020) Digital Forms of Post-Industrial Landscape in the Context of All-for-One Tourism. In: Proceedings of the 3rd International Conference on Advances in Management Science and Engineering (IC-AMSE 2020) , 133. (3rd International Conference on Advances in Management Science and Engineering (IC-AMSE 2020), 12 January 2020 - 13 January 2020, Wuhan, China).

Qu, J, Ge, X and Liu, Y (2021) Research on the Innovative Regeneration of Post-industrial Space in China. In: Web of Proceedings . (2021 International Conference on Electronic Commerce, Engineering Management and Information Systems (ECEMIS 2021), 25 February 2021 - 27 February 2021, Toronto, Canada).

Quraya, AB, Al-Ameeri, A, Hashim, R, Yeboah, D, Shubbar, AAF, AL-Hayawi, AY, Al-Jumeily, D and Mustafina, J (2020) Experimental Investigations of Partial Replacement of OPC with PFA and GGBS in cement mortar. IOP Conference Series: Materials Science and Engineering, 1058 (1). ISSN 1757-8981

R

Rachmanto, T, Allanson, D, Matthews, C and Jenkinson, I (2014) Monitoring of Biodiesel Transesterification Process Using Impedance Measurement. International Journal of Materials, Mechanics and Manufacturing, 2 (4). pp. 265-271. ISSN 1793-8198

Rahman, R, Dirar, S, Jemaa, Y, Theofanous, M and Elshafie, M (2018) Experimental Behavior and Design of Exterior Reinforced Concrete Beam-Column Joints Strengthened with Embedded Bars. Journal of Composites for Construction, 22 (6). ISSN 1090-0268

Raja, S, Yusof, F, Muhamad, MR, Mohd Mansor, MS, Juri, A, Wu, B, Jamaludin, MF, Ansari, N and Ren, J (2024) Formation and influencing mechanism of the intermetallic compound in the friction stir welding of immiscible AZ31 and SPHC steel using aluminium powder as an additive. Journal of Materials Research and Technology, 30. pp. 9102-9114. ISSN 2238-7854

Rajarathinam, K, Gomm, JB, Jones, KO and Abdelhadi, AS (2014) Decentralised Control Optimisation for a Glass Furnace by SGA’s. In: ACM International Conference Proceeding Series , 883. pp. 248-255. (Computer Systems and Technologies, CompSysTech 2014, 27 June 2014 - 28 June 2014, University of Ruse, Bulgaria).

Rajarathinam, K, Gomm, JB, Yu, DL and Abdelhadi, AS (2016) PID controller tuning for a multivariable glass furnace process by genetic algorithm. International Journal of Automation and Computing, 13 (1). pp. 64-72. ISSN 1476-8186

Ram, M, Baltzopoulos, V, Shaw, A, Maganaris, CN, Cullen, J and O'Brien, TD (2024) Stair-Fall Risk Parameters in a Controlled Gait Laboratory Environment and Real (Domestic) Houses: A Prospective Study in Faller and Non-Faller Groups. Sensors, 24 (526). ISSN 1424-8220

Ramasamy, S, Abdullah, MMAB, Huang, Y, Hussin, K, Wang, J and Shahedan, NF (2017) Correlation between Hardness and Water Absorption Properties of Saudi Kaolin and White Clay Geopolymer Coating. In: AIP Conference Proceedings , 1885. (3rd Electronic and Green Materials International Conference (EGM), 29 April 2017 - 30 April 2017, Aonang Krabi, THAILAND).

Ran, H, Ma, J, Chen, X, Sun, Y, Gkantou, M and McCrum, D (2024) Local Stability of Laser-Welded Stainless-Steel T-Section Stub Columns. Journal of Structural Engineering, 150 (7). ISSN 0733-9445

Ranadewa, KATO, Y.G. Sandanayake, YGS and Siriwardena, M (2021) Enabling lean through human capacity building: an investigation of small and medium contractors. Built Environment Project and Asset Management. ISSN 2044-124X

Rao, L, Liu, H, Liu, S, Shi, Z, Ren, X, Zhou, Y and Yang, Q (2018) Interface relationship between TiN and Ti substrate by first-principles calculation. Computational Materials Science, 155. pp. 36-47. ISSN 0927-0256

Rasheed, A (2018) Development of a New Environmentally Friendly Glass Fibre Reinforced Cold Mix Microasphalt with High Resistance to Cracking and Deformation. Doctoral thesis, Liverpool John Moores University.

Rashid, FL, Al-Obaidi, MA, Dulaimi, A, Bahlol, HY and Hasan, A (2023) Recent Advances, Development, and Impact of Using Phase Change Materials as Thermal Energy Storage in Different Solar Energy Systems: A Review. Designs, 7 (3). p. 66.

Rashid, FL, Al-Obaidi, MA, Dulaimi, A, Bernardo, LFA, Eleiwi, MA, Mahood, HB and Hashim, A (2023) A Review of Recent Improvements, Developments, Effects, and Challenges on Using Phase-Change Materials in Concrete for Thermal Energy Storage and Release. Journal of Composites Science, 7 (9).

Rashid, FL, Al-Obaidi, MA, Dulaimi, A, Bernardo, LFA, Redha, ZAA, Hoshi, HA, Mahood, HB and Hashim, A (2023) Recent Advances on The Applications of Phase Change Materials in Cold Thermal Energy Storage: A Critical Review. Journal of Composites Science, 7 (8).

Rashid, FL, Al-Obaidi, MA, Dulaimi, A, Mahmood, DMN and Sopian, K (2023) A Review of Recent Improvements, Developments, and Effects of Using Phase-Change Materials in Buildings to Store Thermal Energy. Design, 7 (4). pp. 1-38.

Rashid, FL, Dulaimi, A, Hatem, WA, Al-Obaidi, MA, Ameen, A, Eleiwi, MA, Jawad, SA, Bernardo, LFA and Hu, JW (2024) Recent Advances and Developments in Phase Change Materials in High-Temperature Building Envelopes: A Review of Solutions and Challenges. Buildings, 14 (6).

Rashid, FL, Hashim, A, Dulaimi, A, Hadi, A, Ibrahim, H, Al-Obaidi, MA and Ameen, A (2024) Enhancement of Polyacrylic Acid/Silicon Carbide Nanocomposites’ Optical Properties for Potential Application in Renewable Energy. Journal of Composites Science, 8 (4).

Rashid, FL, Khalaf, AF, Al-Obaidi, MA, Dulaimi, A and Ameen, A (2024) Investigating the Impact of Cell Inclination on Phase Change Material Melting in Square Cells: A Numerical Study. Materials, 17 (3). ISSN 1996-1944