Items where Author is "Ahuir-Torres, JI"
Article
Khidasheli, N, Gvazava, S, Zakharov, G, Chikhradze, M, Batako, ADL ORCID: 0000-0002-4613-7067, Ahuir-Torres, JI, Pazhani, A and Xavior, MA
(2025)
Effect of Heat Treatments on the Microstructure, Corrosion Resistance and Wear Behaviour of Bainitic/Martensitic Ductile Iron Under Dry Sliding Friction.
Journal of Manufacturing and Materials Processing, 9 (5).
Kotadia, HR ORCID: 0000-0002-3466-4337, Bareker, N, Khan, MH, Ahuir-Torres, JI and Das, A
(2025)
Aluminium Recycling: A Critical Review of Iron-Bearing Intermetallics in Aluminium Alloys.
Materials Today Sustainability, 30.
ISSN 2589-2347
Mohan, N, Ahuir-Torres, JI, Kotadia, HR and Elger, G (2025) Laser sintering of Cu particle-free inks for high-performance printed electronics. npj Flexible Electron, 9 (1). pp. 1-10. ISSN 2397-4621
Ahuir-Torres, JI, Meredith, A, Batako, AD ORCID: 0000-0002-4613-7067, Kotadia, HR, Opoz, TT
ORCID: 0000-0001-6579-2238, Zhu, G, Khidasheli, N, Sharp, MC
ORCID: 0000-0001-9687-4703 and Bakradze, N
(2025)
Corrosion behaviour of hardened grey cast iron with continuous-wave infrared laser.
Materials Today Communications, 44.
pp. 1-14.
ISSN 2352-4928
Ahuir-Torres, JI ORCID: 0000-0002-3160-0223, Chen, X
ORCID: 0000-0003-2547-9022, Akar, Y, Bingham, PA, Jackson, FF, Li, H, Mason, L, Mishra, R
ORCID: 0000-0001-5992-5348, Walker, DD and Yu, G
(2024)
Influence of the grain chemical composition on the fused silica polishing at atomic scale using molecular dynamic simulations.
Ceramics International, 51 (7).
pp. 9278-9291.
ISSN 0272-8842
Batakliev, T, Ivanov, E, Georgiev, V, Angelov, V, Ahuir-Torres, JI, Harvey, DM ORCID: 0000-0002-1055-3990 and Kotsilkova, R
(2024)
New Insights in the Nanomechanical Study of Carbon-Containing Nanocomposite Materials Based on High-Density Polyethylene.
Applied Sciences, 14 (21).
Ahuir-Torres, JI ORCID: 0000-0002-3160-0223, Jabar, S
ORCID: 0009-0007-2313-2793, Franciosa, P, Ceglarek, D
ORCID: 0000-0003-0788-4673 and Kotadia, HR
ORCID: 0000-0002-3466-4337
(2024)
The microstructure-corrosion relationships in laser-welded dissimilar steel-to-aluminium joints.
npj Materials Degradation, 8 (1).
Ahuir-Torres, JI, Chadwick, J, West, G, Kotadia, HR and Opoz, TT (2024) Effect of electrical discharge machining (EDM) bath composition on long-term corrosion of Ti-6Al-4V in simulated body fluid. Electrochimica Acta, 503. ISSN 0013-4686
Mohan, N, Ahuir-Torres, JI, Bhogaraju, SK, Webler, R, Kotadia, HR ORCID: 0000-0002-3466-4337, Erdogan, H and Elger, G
(2024)
Decomposition mechanism and morphological evolution of in situ realized Cu nanoparticles in Cu complex inks.
New Journal of Chemistry, 48 (15).
pp. 6796-6808.
ISSN 1144-0546
Ahuir-Torres, JI ORCID: 0000-0002-3160-0223, Batako, ADL
ORCID: 0000-0002-4613-7067, Khidasheli, N, Bakradze, N and Zhu, G
ORCID: 0000-0003-2022-6384
(2024)
Improving Commercial Motor Bike Rim Disc Hardness Using a Continuous-Wave Infrared Fibre Laser.
Journal of Manufacturing and Materials Processing, 8 (1).
p. 18.
Chen, X, Xu, S, Ahuir-Torres, JI, Wang, Z, Chen, X ORCID: 0000-0003-2547-9022, Yu, T and Zhao, J
(2023)
Acceleration mechanism of abrasive particle in ultrasonic polishing under synergistic physical vibration and cavitation: Numerical study.
Ultrasonics Sonochemistry, 101.
ISSN 1350-4177
Ahuir-Torres, JI, Gibbons, GJ, West, G, Das, A and Kotadia, HR ORCID: 0000-0002-3466-4337
(2023)
Understanding the corrosion behaviour of Al-Mg alloy fabricated using a Laser Powder Bed Fusion (L-PBF) Additive Manufacturing (AM) process.
Journal of Alloys and Compounds, 969.
ISSN 0925-8388
Walker, DL ORCID: 0000-0002-6687-024X, Ahuir-Torres, JI, Akar, Y, Bingham, PA, Chen, X, Darowski, M, Fähnle, O, Gambron, P, Jackson, FF, Li, H, Mason, L, Mishra, R, Shahjalal, A and Yu, G
(2023)
Bridging the Divide Between Iterative Optical Polishing and Automation.
Nanomanufacturing and Metrology, 6 (1).
Ahuir-Torres, JI ORCID: 0000-0002-3160-0223 and Sharp, MC
(2022)
Influence of Pulse Energy and a Material’s Magnetic Field on the Morphology of the Dimples Produced with Nanosecond Pulsed Laser on a Magnet.
Lasers in Manufacturing and Materials Processing.
ISSN 2196-7229
Simandjuntak, S ORCID: 0000-0003-3167-6882, Bausch, N
ORCID: 0000-0001-9219-6052, Farrar, A, Ahuir-Torres, JI, Thomas, B and Muna, J
(2021)
iWindCr field trial and electrochemical analysis for corrosion detection and monitoring offshore wind turbine's MP-TP steel components.
JOURNAL OF MARINE ENGINEERING AND TECHNOLOGY, 21 (6).
pp. 311-323.
ISSN 2046-4177
Ahuir-Torres, JI, Simandjuntak, S, Bausch, N, Farrar, A, Webb, S, Nash, A, Thomas, B, Muna, J, Jonsson, C and Matthew, D (2019) Corrosion threshold data of metallic materials in various operating environment of offshore wind turbine parts (tower, foundation, and nacelle/gearbox). Data in Brief, 25. ISSN 2352-3409
Conference or Workshop Item
Ahuir-Torres, JI, Chen, X ORCID: 0000-0003-2547-9022, Mason, L, Gambron, P, Walker, DD, Yu, G, Li, H, Mishra, R, Akar, Y, Jackson, FF and Bingham, PA
(2022)
Study of the Normal Force and Velocity Influence on the Fused Silica Scratching Mechanisms with α-Alumina Grit at Atomic Scale via Reaxff Reactive Molecular Dynamic Simulations.
In:
Proceedings of the 24th International Symposium on Advances in Abrasive Technology
.
(The 24th International Symposium on Advances in Abrasive Technology (ISAAT), 9th-12th December 2022, Guangzhou, China).
Ahuir-Torres, JI, Sharp, M ORCID: 0000-0001-9687-4703, Bakradze, N and Batako, ADL
ORCID: 0000-0002-4613-7067
(2022)
Microstructural Design of the Cast Iron via Laser Hardening with Defocused Beam of the Continuous Wave CO2 Laser.
In:
Journal of Physics: Conference Series
, 2198 (1).
012048-012048.
(15th Global Congress on Manufacturing and Management (GCMM 2021), Liverpool, UK).
Ahuir-Torres, JI, Sharp, MC and Seddighi, M (2020) Influence of the surface roughness and pulse energy in the production of dimple features on Cr2O3 surfaces. In: Procedia CIRP , 94. pp. 930-935. (11th CIRP Conference on Photonic Technologies, 7-10th September 2020, Virtual Conference).
Liu, X ORCID: 0000-0002-6987-2451, Opoz, TT, Njie, M, Ahuir-Torres, JI and Chen, X
Atomic Diffusion Additive Manufacturing: Optimizing Surface Finish and Mechanical Properties of 17-4 PH Stainless Steel through Mass Finishing Techniques.
In:
The 26th International Symposium on Advances in Abrasive Technology Conference Proceedings
.
(The 26th International Symposium on Advances in Abrasive Technology, 17th Nov - 20th Nov 2024, Portoroz, Slovenia).
(Accepted)