Article

Al-Darraji, F, Sadique, MM, Alahmari, TS, Yu, Z, Shubbar, A and Marolt Cebasek, T (2024) Investigation of new confined concrete-filled aluminum tube piles: Experimental and numerical approaches. Results in Engineering, 24. ISSN 2590-1230

Davies, FN, Sadique, MM and Amoako-Attah, J (2023) Investigating effective building fabric as a passive cooling technique to combat overheating in UK residential buildings. Engineering Future Sustainability, 1 (2). ISSN 2753-4693

Nasr, MS, Salman, AJ, Ghayyib, RJ, Shubbar, A, Al-Mamoori, S, Al-khafaji, Z, Hashim, TM, Hasan, ZA and Sadique, MM (2023) Effect of Clay Brick Waste Powder on the Fresh and Hardened Properties of Self-Compacting Concrete: State-of-the-Art and Life Cycle Assessment. Energies, 16 (12).

Al-Darraji, F, Sadique, MM, Marolt Cebasek, T, Ganguli, A, Yu, Z and Hashim, K (2023) A Systematic Review of the Geotechnical and Structural Behaviors of Fiber-Reinforced Polymer Composite Piles. Geosciences, 13 (3). ISSN 2076-3263

Strohle, M, Sadique, MM, Dulaimi, AF and Kadhim, MA (2022) Prospect and barrier of 3D concrete: a systematic review. Innovative Infrastructure Solutions, 8 (1). ISSN 2364-4176

Dulaimi, AF, Al-Busaltan, S, Kadhim, MA, Al-Khafaji, R, Sadique, MM, Al Nageim, H, Ibrahem, RK, Awrejcewicz, J, Pawłowski, W and Mahdi, JM (2022) A Sustainable Cold Mix Asphalt Mixture Comprising Paper Sludge Ash and Cement Kiln Dust. Sustainability, 14 (16).

Islam, GMS, Shubbar, AAF, Sarker, S and Sadique, MM (2022) Ternary combined industrial wastes for non-fired brick. Australian Journal of Structural Engineering. ISSN 1328-7982

Islam, GMS, Sarker, S, Sadique, MM and Shubbar, AAF (2022) Non-Fired Building Blocks Using Industrial Wastes. Journal of Engineering Science, 12 (3). pp. 1-10. ISSN 2075-4914

Mohammed, H, Giuntini, F, Sadique, MM, Shaw, A and Brás, A (2021) Polymer modified concrete impact on the durability of infrastructure exposed to chloride environments. Construction and Building Materials, 317. ISSN 0950-0618

Abduljabbar, N, Al-Busaltan, S, Dulaimi, AF, Al-Yasari, R, Sadique, MM and Nageim, HA (2021) The effect of waste low-density polyethylene on the mechanical properties of thin asphalt overlay. Construction and Building Materials, 315. ISSN 0950-0618

Hawesah, HA, Sadique, MM, Harris, C, Al Nageim, H, Stopp, K and Pearl, H (2021) Polymer modified asphalt binder – an approach for enhancing temperature sensitivity for emergency pavement repair. International Journal of Pavement Engineering. ISSN 1029-8436

Al Hawesah, H, Sadique, MM, Harris, C, Al Nageim, H, Stopp, K, Pearl, H and Shubbar, AAF (2021) Improving the Temperature Sensitivity of Bitumen for Emergency Pavement Repair. Periodica Polytechnica Civil Engineering. ISSN 0553-6626

Dulaimi, AF, Al-Busaltan, S and Sadique, MM (2021) The development of a novel, microwave assisted, half-warm mixed asphalt. Construction and Building Materials, 301. ISSN 0950-0618

Al Hawesah, H, Sadique, MM, Harris, C, Al Nageim, H, Stopp, K, Pearl, H and Shubbar, A (2021) A Review on Improving Asphalt Pavement Service Life Using Gilsonite-Modified Bitumen. Sustainability, 13 (12). ISSN 2071-1050

Al-Khafaji, ZS, Majdi, A, Shubbar, AAF, Nasr, MS, Al-Mamoori, SF, Alkhayyat, A, Al-Rifaie, A, Al-Emadi, N, Al-Mufti, RL, Sadique, MM and Hashim, KS (2021) Influence of High Volume RHA on Properties of Cement Mortar. IOP Conference Series: Materials Science and Engineering, 1090 (1). ISSN 1757-8981

Al-Mamoori, SF, Shubbar, AAF, Al-Khafaji, ZS, Nasr, MS, Alkhayyat, A, Al-Rifaie, A, Latif Al-Mufti, RA, Sadique, MM and Hashim, KS (2021) Production of Ternary Blend Binder as an Alternative to Portland Cement. IOP Conference Series: Materials Science and Engineering, 1090 (1). ISSN 1757-8981

Torres de Sande, V, Sadique, MM, Pineda, P, Brás, A, Atherton, W and Riley, ML (2021) Potential use of sugar cane bagasse ash as sand replacement for durable concrete. Journal of Building Engineering. ISSN 2352-7102

Shubbar, AAF, Sadique, MM, Nasr, MS, Al-Khafaji, ZS and Hashim, KS (2020) The impact of grinding time on properties of cement mortar incorporated high volume waste paper sludge ash. Karbala International Journal of Modern Science, 6 (4). ISSN 2405-609X

Mohammed, H, Sadique, MM, Shaw, A and Brás, A (2020) The Influence of Incorporating Plastic within Concrete and the Potential Use of Microwave Curing; A Review. Journal of Building Engineering, 32. ISSN 2352-7102

Kadhim, A, Sadique, MM, Al-Mufti, R and Hashim, KS (2020) Developing One-Part Alkali-Activated metakaolin/natural pozzolan Binders using Lime Waste as activation Agent. Advances in Cement Research. ISSN 0951-7197

Kadhim, A, Sadique, MM, Al-Mufti, R and Hashim, KS (2020) Long-term performance of novel high-calcium one-part alkali-activated cement developed from thermally activated lime kiln dust. Journal of Building Engineering. ISSN 2352-7102

Majdi, HS, Shubbar, AAF, Nasr, MS, Al-Khafaji, ZS, Jafer, H, Abdulredha, M, Al Masoodi, Z, Sadique, MM and Hashim, KS (2020) Experimental data on compressive strength and ultrasonic pulse velocity properties of sustainable mortar made with high content of GGBFS and CKD combinations. Data in Brief. ISSN 2352-3409

Shubbar, AAF, Jafer, H, Abdulredha, M, Al-Khafaji, ZS, Nasr, MS, Al Masoodi, Z and Sadique, MM (2020) Properties of cement mortar incorporated high volume fraction of GGBFS and CKD from 1 day to 550 days. Journal of Building Engineering, 30. ISSN 2352-7102

Al-Saati, N, Hussein, T, Abbas, M, Hashim, KS, Al-Saati, Z, Kot, P, Sadique, MM, Aljefery, M and Carnacina, I (2019) Statistical modelling of turbidity removal applied to non-toxic natural coagulants in water treatment: a case study. Desalination and Water Treatment, 150. pp. 406-412. ISSN 1944-3986

Sadique, MM, Al-Nageim, H, Atherton, W, Seton, L and Dempster, NM (2019) Analytical investigation of hydration mechanism of a non-Portland binder with waste paper sludge ash. Construction and Building Materials, 211. pp. 80-87. ISSN 0950-0618

Shubbar, AAF, Sadique, MM, Kot, P and Atherton, W (2019) Future of clay-based construction materials – A review. Construction and Building Materials, 210. pp. 172-187. ISSN 0950-0618

Shubbar, AAF, Jafer, H, Dulaimi, A, Hashim, KS, Atherton, W and Sadique, MM (2018) The development of a low carbon binder produced from the ternary blending of cement, ground granulated blast furnace slag and high calcium fly ash: An experimental and statistical approach. Construction and Building Materials, 187. pp. 1051-1060. ISSN 0950-0618

Jafer, HM, Atherton, W, Sadique, MM, Ruddock, F and Loffill, E (2017) Stabilisation of soft soil using binary blending of high calcium fly ash and palm oil fuel ash. Applied Clay Science. ISSN 0169-1317

Jafer, HM, Atherton, W, Sadique, MM, Ruddock, FM and Loffill, E (2017) Development of a New Ternary Blended Cementitious Binder Produced from Waste Materials for use in Soft Soil Stabilisation. Journal of Cleaner Production. ISSN 0959-6526

Sadique, MM, Al-Nageim, H and Stopps, K (2017) The reliability of asset management regime of the SROH using air void content of asphalt mixtures. International Journal of Pavement Engineering. ISSN 1029-8436

Sadique, MM and Coakley, E (2016) The influence of physico-chemical properties of fly ash and CKD on strength generation of high-volume fly ash concrete. Advances in Cement Research, 28 (9). pp. 595-605. ISSN 0951-7197

Sadique, MM, Al-Nageim, H and Stopps, K (2015) To investigate the fundamental causes of utility air voids content failures in asphalt layers to achieve Specification for the Reinstatement of Openings in Highways (SROH) compliant performance. Construction and Building Materials, 93. pp. 595-607. ISSN 0950-0618

Book Section

Sadique, MM, Kadhim, A, Atherton, W and Kot, P (2020) Development of New Precursors for One-Part Alkali-Activated Geopolymer Using IndustrialWastes. In: Sustainable Environmental Geotechnics. Lecture Notes in Civil Engineering, 89 . Springer Nature Switzerland AG 2020, https://dx.doi.org/10.1007/978-3-030-51350-4, pp. 115-123. ISBN 978-3-030-51349-8

Monograph

Sadique, MM, Al Nageim, H and Stopps, K (2017) Investigating the reliability of air void testing regime of Specification of the Reinstatement of Openings in Highways (SROH) for assessing the performance of a hand laid recipe mixed bituminous material in utility reinstatement. Project Report. LJMU, Liverpool.

Conference or Workshop Item

Shubbar, AAF, Al-Jumeily, D, Aljaaf, AJ, Alyafei, M, Sadique, MM and Mustafina, J (2020) Investigating the Mechanical and Durability Performance of Cement Mortar Incorporated Modified Fly Ash and Ground Granulated Blast Furnace Slag as Cement Replacement Materials. In: 2019 12th International Conference on Developments in eSystems Engineering (DeSE) . (2019 Developments in eSystems Engineering (DeSE), 07-10 October 2019, Kazan, Russia).

Shubbar, AAF, Al-Shaer, A, Alkizwini, RS, Hashim, KS, Hawesah, HA and Sadique, MM (2019) Investigating the influence of cement replacement by high volume of GGBS and PFA on the mechanical performance of cement mortar. In: IOP Conference Series: Materials Science and Engineering , 584. 012022. (the International Conference on Civil and Environmental Engineering Technologies (ICCEET), 23 April 2019 - 24 April 2019, University of Kufa, Iraq).