Article

Abbasi, MH, Abdullah, B, Ahmad, MW, Rostami, A and Cullen, J (2021) Heat transition in the European building sector: Overview of the heat decarbonisation practices through heat pump technology. Sustainable Energy Technologies and Assessments, 48. ISSN 2213-1388

Abduljabbar, N, Al-Busaltan, S, Dulaimi, AF, Al-Yasari, R, Sadique, MM and Nageim, HA (2021) The effect of waste low-density polyethylene on the mechanical properties of thin asphalt overlay. Construction and Building Materials, 315. ISSN 0950-0618

Al Hawesah, H, Sadique, MM, Harris, C, Al Nageim, H, Stopp, K, Pearl, H and Shubbar, A (2021) A Review on Improving Asphalt Pavement Service Life Using Gilsonite-Modified Bitumen. Sustainability, 13 (12). ISSN 2071-1050

Al Hawesah, H, Sadique, MM, Harris, C, Al Nageim, H, Stopp, K, Pearl, H and Shubbar, AAF (2021) Improving the Temperature Sensitivity of Bitumen for Emergency Pavement Repair. Periodica Polytechnica Civil Engineering. ISSN 0553-6626

Al-Baghdadi, HM, Shubbar, AAF and Al-Khafaji, ZS (2021) The Impact of Rice Husks Ash on Some Mechanical Features of Reactive Powder Concrete with High Sulfate Content in Fine Aggregate. International Review of Civil Engineering (IRECE), 12 (4). pp. 248-254. ISSN 2036-9913

Al-Faluji, D, Al-Rubaye, MM, Nasr, MS, Shubbar, AAF, Al-Khafaji, ZS, Alkhayyat, A and Abdulraheem, MS (2021) Impact of Substitute Portland Cement with CKD on the Mechanical and Durability Characteristics of Cement Mortar. IOP Conference Series: Materials Science and Engineering, 1090 (1). ISSN 1757-8981

Al-Hashimi, O, Hashim, KS, Loffill, E, Marolt Cebasek, T, Nakouti, I, Faisal, AAH and Al-Ansari, N (2021) A comprehensive review for groundwater contamination and remediation: occurrence, migration and adsorption modeling. Molecules, 26 (19). ISSN 1420-3049

Al-Khafaji, ZS, Falah, MW, Shubbar, AAF, Nasr, MS, Al-Mamoori, SF, Alkhayyat, A, Al-Rifaie, A, Eissa, A, Latif Al-Mufti, RA and Hashim, KS (2021) The Impact of Using Different Ratios of Latex Rubber on the Characteristics of Mortars Made with GGBS and Portland Cement. IOP Conference Series: Materials Science and Engineering, 1090 (1). ISSN 1757-8981

Al-Khafaji, ZS, Majdi, A, Shubbar, AAF, Nasr, MS, Al-Mamoori, SF, Alkhayyat, A, Al-Rifaie, A, Al-Emadi, N, Al-Mufti, RL, Sadique, MM and Hashim, KS (2021) Influence of High Volume RHA on Properties of Cement Mortar. IOP Conference Series: Materials Science and Engineering, 1090 (1). ISSN 1757-8981

Al-Khafaji, ZS, Majdi, A, Shubbar, AAF, Nasr, MS, Al-Mamoori, SF, Alkhulaifi, A, Al-Mufti, RL, Al-Rifaie, A, Alkhayyat, A and Hashim, KS (2021) Impact of high volume GGBS replacement and steel bar length on flexural behaviour of reinforced concrete beams. IOP Conference Series: Materials Science and Engineering, 1090 (1). ISSN 1757-8981

Al-Mamoori, SF, Shubbar, AAF, Al-Khafaji, ZS, Nasr, MS, Alkhayyat, A, Al-Rifaie, A, Latif Al-Mufti, RA, Sadique, MM and Hashim, KS (2021) Production of Ternary Blend Binder as an Alternative to Portland Cement. IOP Conference Series: Materials Science and Engineering, 1090 (1). ISSN 1757-8981

Al-Rifaie, A, Al-Hassani, H and Shubbar, AAF (2021) Flexural behaviour of reinforced concrete beams with horizontal construction joints. IOP Conference Series: Materials Science and Engineering, 1090 (1). ISSN 1757-8981

Al-Rifaie, A, Al-Husainy, AS, Al-Mansoori, T and Shubbar, AAF (2021) Flexural impact resistance of steel beams with rectangular web openings. Case Studies in Construction Materials, 14. ISSN 2214-5095

Al-Saati, NH, Omran, II, Salman, AA, Al-Saati, Z and Hashim, KS (2021) Statistical modeling of monthly streamflow using time series and artificial neural network models: Hindiya Barrage as a case study. Water Practice and Technology. ISSN 1751-231X

Al-Sareji, OJ, Grmasha, RALI, Salman, JM and Hashim, KS (2021) Street dust contamination by heavy metals in babylon governorate, Iraq. Journal of Engineering Science and Technology, 16 (1). pp. 455-469. ISSN 1823-4690

Al-Zahra, BIA, Alwash, M, Baiee, A and Shubbar, AA (2021) Limitations on aci code minimum thickness requirements for flat slab. Civil Engineering Journal, 7 (11). pp. 1918-1932. ISSN 2676-6957

Al-Zahra, BIA, Kadhim, MJ, Shadhan, KK and Shubbar, AA (2021) Limitations of Flexural Crack Width in Simply Supported One-Way Ribbed Slab. International Review of Civil Engineering, 12 (6). pp. 351-357. ISSN 2036-9913

Aldeka, AB, Tziavos, NI, Gkantou, M, Dirar, S and Chan, AHC (2021) Seismic design of non-structural components mounted on irregular reinforced concrete buildings. Journal of Building Engineering, 46. ISSN 2352-7102

Aldhaibani, OA, AL-Jumaili, MH, Raschella, A, Kolivand, H and Preethi, AP (2021) A centralized architecture for autonomic quality of experience oriented handover in dense networks. Computers and Electrical Engineering, 94. ISSN 0045-7906

Aldhaibani, OA, Raschella, A, Mohi-Ud-din, G and MacKay, M (2021) A User Prioritisation Algorithm for Horizontal Handover in Dense WLANs. International Journal of Wireless Information Networks. ISSN 1068-9605

Alfalah, AA, D’Arcy, E, Stevenson, S and Heinig, S (2021) Modelling Housing Market Fundamentals and the Response to Economic and Political Events: Empirical Evidence from Kuwait. International Journal of Housing Markets and Analysis. ISSN 1753-8270

Aljaaf, AJ, Mohsin, TM, Al-Jumeily, D and Alloghani, M (2021) A fusion of data science and feed-forward neural network-based modelling of COVID-19 outbreak forecasting in IRAQ. Journal of Biomedical Informatics, 118. ISSN 1532-0464

Almatrafi, M, Theofanous, M, Dirar, S and Gkantou, M (2021) Structural response of cold-formed lipped Z purlins – Part 1: Experimental investigation. Thin-Walled Structures, 161. ISSN 0263-8231

Alsalman, A, Assi, LN, Ghotbi, S, Ghahari, S and Shubbar, AAF (2021) Users, Planners, and Governments Perspectives: A Public Survey on Autonomous Vehicles Future Advancements. Transportation Engineering. ISSN 2666-691X

Amin, M, Preuss, A, Deisenroth, T, Liauw, CM, Verran, J and Whitehead, KA (2021) Use of spherical particles to understand conidial attachment to surfaces using atomic force microscopy. iScience, 24 (1). ISSN 2589-0042

Andredaki, M, Georgoulas, A, Miche, N and Marengo, M (2021) Numerical investigation of liquid film instabilities and evaporation in confined oscillating slug-plug flows. Wit Transactions on Engineering Sciences, 123 (12). pp. 127-138. ISSN 1746-4471

Andredaki, M, Vontas, K, Georgoulas, A, Miché, N and Marengo, M (2021) The effect of channel aspect ratio on flow boiling characteristics within rectangular micro-passages. International Journal of Heat and Mass Transfer, 183 (C). ISSN 0017-9310

Brooks, M, Abdellatif, M and Alkhaddar, R (2021) Application of life cycle carbon assessment for a sustainable building design: a case study in the UK. International Journal of Green Energy. ISSN 1543-5075

Brás, A, Van Der Bergh, JM, Mohammed, H and Nakouti, I (2021) Design Service Life of RC Structures with Self-Healing Behaviour to Increase Infrastructure Carbon Savings. Materials, 14 (12). ISSN 1996-1944

Chadee, AA, Chadee, XT, Mwasha, A and Martin, HH (2021) Implications of 'Lock-in' on Public Sector Project Management in a Small Island Development State. Buildings, 11 (5).

Chen, J, Dan, H, Ding, Y, Gao, Y, Guo, M, Guo, S, Han, B, Hong, B, Hou, Y, Hu, C, Hu, J, Huyan, J, Jiang, J, Jiang, W, Li, C, Liu, P, Liu, Y, Liu, Z, Lu, G, Ouyang, J et al, Qu, X, Ren, D, Wang, C, Wang, C, Wang, D, Wang, D, Wang, H, Wang, H, Xiao, Y, Xing, C, Xu, H, Yan, Y, Yang, X, You, L, You, Z, Yu, B, Yu, H, Yu, H, Zhang, H, Zhang, J, Zhou, C, Zhou, C and Zhu, X (2021) New innovations in pavement materials and engineering: A review on pavement engineering research 2021. Journal of Traffic and Transportation Engineering (English Edition), 8 (6). pp. 815-999. ISSN 2095-7564

Chippagiri, R, Gavali, H, Ralegaonkar, R, Riley, ML, Shaw, A and Armada Bras, AM (2021) Application of Sustainable Prefabricated Wall Technology for Energy Efficient Social Housing. Sustainability, 13 (3). ISSN 2071-1050

Cotterill, J, Ethaib, S, Hashim, KS, Alqashou, F, Al-Hayawi, AY, Abdellatif, M, Gkantou, M and Shubbar, AAF (2021) Evaluation of the Use of Lignocellusic Biomass in Thermal Insulation for Green Building. IOP Conference Series: Materials Science and Engineering, 1058 (1). ISSN 1757-8981

Dulaimi, AF, Al-Busaltan, S and Sadique, MM (2021) The development of a novel, microwave assisted, half-warm mixed asphalt. Construction and Building Materials, 301. ISSN 0950-0618

Esen, AF, Woodward, PK, Laghrouche, O, Cebasek, TM, Brennan, AJ, Robinson, S and Connolly, DP (2021) Full-Scale Laboratory Testing Of A Geosynthetically Reinforced Soil Railway Structure. Transportation Geotechnics, 28. ISSN 2214-3912

Faisal, AAH, Alkhateeb, RW, Al-Hashimi, OA, Shubbar, AAF and Saleh, B (2021) Removal of zinc, lead and nickel from contaminated soil by electro-kinetic technology under the influence of washing and buoyance forces with different purging solutions. Separation Science and Technology. ISSN 0149-6395

Farhan, S, Akef, V, Antón, D, Hashim, KS and Zubaidi, S (2021) Factors influencing the transformation of Iraqi holy cities: the case of Al-Najaf. Przegląd Naukowy Inżynieria i Kształtowanie Środowiska, 30 (2). pp. 365-375. ISSN 1732-9353

Frau, I, Wylie, S, Byrne, P, Onnis, P, Cullen, J, Mason, A and Korostynska, O (2021) Microwave sensors for in situ monitoring of trace metals in polluted water. Sensors, 21 (9). p. 3147. ISSN 1424-8220

Georgantzia, E, Bin Ali, S, Gkantou, M, Kamaris, GS, Kansara, KD and Atherton, W (2021) Flexural buckling performance of concrete-filled aluminium alloy tubular columns. Engineering Structures, 242 (1). ISSN 0141-0296

Georgantzia, E, Gkantou, M and Kamaris, GS (2021) Aluminium alloys as structural material: A review of research. Engineering Structures, 227. ISSN 0141-0296

Georgantzia, E, Gkantou, M and Kamaris, GS (2021) Numerical Modelling and Design of Aluminium Alloy Angles under Uniform Compression. CivilEng, 2 (3). pp. 632-651. ISSN 2673-4109

Gkantou, M, Bock, M and Theofanous, M (2021) Design of stainless steel cross-sections with outstand elements under stress gradients. Journal of Constructional Steel Research, 179. ISSN 0143-974X

Gu, Y, Li, Y and Shaw, A (2021) Development and performance of flexible temperature-sensing fabric. Journal of the Textile Institute. ISSN 0040-5000

Hamad, MA, Nasr, M, Shubbar, AAF, Al-Khafaji, Z, Al Masoodi, Z, Al-Hashimi, O, Kot, P, Al Khaddar, R and Hashim, KS (2021) Production of Ultra-High-Performance Concrete with Low Energy Consumption and Carbon Footprint Using Supplementary Cementitious Materials Instead of Silica Fume: A Review. Energies, 14 (24). ISSN 1996-1073

Hamidifar, H, Zanganeh-Inaloo, F and Carnacina, I (2021) Hybrid scour depth prediction equations for reliable design of bridge piers. Water, 13 (15). ISSN 2073-4441

Hanoon, DS, Sallal, AK, Shubbar, AAF, Al-Khafaji, ZS, Nasr, MS, Al-Mamoori, SF, Al-Fehaida, A, Abdulraheem, MS, Abdulzahra, FR, Alkhayyat, A, Al-Rifaie, A and Hashim, KS (2021) Early age assessment of cement mortar incorporated high volume fly ash. IOP Conference Series: Materials Science and Engineering, 1090 (1). ISSN 1757-8981

Hawesah, HA, Sadique, MM, Harris, C, Al Nageim, H, Stopp, K and Pearl, H (2021) Polymer modified asphalt binder – an approach for enhancing temperature sensitivity for emergency pavement repair. International Journal of Pavement Engineering. ISSN 1029-8436

Heinig, S and Nanda, A (2021) Supervised Learning Algorithms to Extract Market Sentiment: An Application in the UK Commercial Real Estate Market. Real Estate Finance, 38 (2). pp. 147-160. ISSN 0748318X

Idowu, IA, Hashim, KS, Shaw, A and Nunes, LJR (2021) Enhancing the fuel properties of beverage wastes as non-edible feedstock for biofuel production. Biofuels. ISSN 1759-7269

Jabbar, DN, Al-Rifaie, A, Hussein, AM, Shubbar, AAF, Nasr, MS and Al-Khafaji, ZS (2021) Shear behaviour of reinforced concrete beams with small web openings. Materials Today: Proceedings. ISSN 2214-7853

Jafer, H, Jawad, I, Majeed, Z and Shubbar, A (2021) The development of an ecofriendly binder containing high volume of cement replacement by incorporating two by-product materials for the use in soil stabilization. Scientific Review Engineering and Environmental Sciences, 30 (1). pp. 62-74. ISSN 1732-9353

Jannat, N, Latif Al-Mufti, RA, Hussein, A, Abdullah, B and Cotgrave, A (2021) Influences of Agro-wastes on the Physico-mechanical and Durability Properties of Unfired Clay Blocks. Construction and Building Materials, 318. ISSN 0950-0618

Jannat, N, Latif Al-Mufti, RA, Hussien, A, Abdullah, B and Cotgrave, A (2021) Influence of Sawdust Particle Sizes on the Physico-Mechanical Properties of Unfired Clay Blocks. Design, 5 (3). ISSN 2411-9660

Jannat, N, Latif Al-Mufti, RA, Hussien, A, Abdullah, B and Cotgrave, A (2021) Utilisation of nut shell wastes in Brick, Mortar and Concrete: A review. Construction and Building Materials, 293. ISSN 0950-0618

Ji, K, Zhang, Q, Yuan, Z, Cheng, H and Yu, DL (2021) A virtual force interaction scheme for multi-robot environment monitoring. Robotics and Autonomous Systems. ISSN 0921-8890

Kadhum, M, Mahdi, Z, Funfakh, Y, Mohammed, Z, Abdulraheem, M and Gkantou, M (2021) Experimental investigation on the post-fire performance of reactive powder concrete columns. Przegląd Naukowy Inżynieria i Kształtowanie Środowiska, 30 (2). pp. 315-326. ISSN 1732-9353

Khodadadyan, A, Researcher, P, Mythen, G, Bishop, B and Assa, H (2021) Grasping the nettle? Considering the contemporary challenges of risk assessment. Journal of Risk Research, 24 (12). pp. 1605-1618. ISSN 1366-9877

Kot, P, Muradov, M, Gkantou, M, Kamaris, GS, Hashim, KS and Yeboah, D (2021) Recent Advancements in Non-Destructive Testing Techniques for Structural Health Monitoring. Applied Sciences, 11 (6). ISSN 2076-3417

Kraidi, L, Shah, RK, Matipa, WM and Borthwick, F (2021) An Investigation of mitigating the Safety and Security Risks allied with Oil and Gas Pipeline Project: a case study in Iraq. Journal of Pipeline Science and Engineering, 1 (3). pp. 349-359. ISSN 2667-1433

Marolt Cebasek, T and Tom, C (2021) FULL FACE TUNNEL EXCAVATION IN SOILS. Proceedings of the 3rd Annual International Research Symposium –2020. pp. 100-168. ISSN 2659-2061

Martin, H, Craigwell, R and Ramjarrie, K (2021) Grit, motivational belief, self-regulated learning (SRL), and academic achievement of civil engineering students. European Journal of Engineering Education. ISSN 0304-3797

Matrood, MS, Al-Rifaie, A, Zinkaah, OH and Shubbar, AAF (2021) Behaviour of moment resisting reinforced concrete frames subjected to column removal scenario. IOP Conference Series: Materials Science and Engineering, 1090 (1). ISSN 1757-8981

Mohammed, H, Giuntini, F, Sadique, MM, Shaw, A and Brás, A (2021) Polymer modified concrete impact on the durability of infrastructure exposed to chloride environments. Construction and Building Materials, 317. ISSN 0950-0618

Mousazadeh, M, Ashoori, R, Paital, B, Kabdaslı, I, Frontistis, Z, Hashemi, M, Sandoval, MA, Sherchan, S, Das, K and Emamjomeh, MM (2021) Wastewater based epidemiology perspective as a faster protocol for detecting coronavirus rna in human populations: A review with specific reference to sars-cov-2 virus. Pathogens, 10 (8).

Mousazadeh, M, Paital, B, Naghdali, Z, Mortezania, Z, Hashemi, M, Karamati Niaragh, E, Aghababaei, M, Ghorbankhani, M, Lichtfouse, E, Sillanpää, M, Hashim, KS and Emamjomeh, MM (2021) Positive environmental effects of the coronavirus 2020 episode: a review. Environment, Development and Sustainability. ISSN 1387-585X

Mualam, N, Hendricks, A, Maliene, V and Salinger, E (2021) Value Capture and Vertical Allocations of Public Amenities. Sustainability, 13 (7). ISSN 2071-1050

Obaid, MK, Nasr, MS, Ali, IM, Shubbar, AAF and Hashim, KS (2021) Performance of Green Mortar Made From Locally Available Waste Tiles and Silica Fume. Journal of Engineering Science and Technology, 16 (1). pp. 136-151. ISSN 1823-4690

Ojuri, O and Hyunwook, Y (2021) How does the biophilic design of building projects impact consumers’ responses? – Case of retail stores. Journal of Retailing and Consumer Services, 62, (102637). ISSN 0969-6989

Omer, G, Kot, P, Atherton, W, Muradov, M, Gkantou, M, Shaw, A, Riley, ML, Hashim, KS and Al-Shamma'a, A (2021) A Non-Destructive Electromagnetic Sensing Technique to Determine Chloride Level in Maritime Concrete. Karbala International Journal of Modern Science, 7 (1). pp. 61-71. ISSN 2405-609X

Omran, II, Al-Saati, NH, Al-Saati, HH, Hashim, KS and Al-Saati, ZN (2021) Sustainability assessment of wastewater treatment techniques in urban areas of Iraq using multi-criteria decision analysis (MCDA). Water Practice and Technology. ISSN 1751-231X

Pannozzo, N, Leonardi, N, Carnacina, I and Smedley, R (2021) Dataset of results from numerical simulations of increased storm intensity in an estuarine salt marsh system. Data in Brief, 38. ISSN 2352-3409

Peng, G, Sun, Y, Zhang, Q, Yang, Q and Shen, W (2021) A collaborative design platform for new alloy material development. Advanced Engineering Informatics, 51. ISSN 1474-0346

Purumal, K, Ali, AS, Zakaria, N and Baaki, TK (2021) Systematic literature review on green maintenance principles and maintenance performance indicators for green buildings design. Journal of Design and Built Environment, 21 (2). pp. 59-75. ISSN 1823-4208

Ranadewa, KATO, Y.G. Sandanayake, YGS and Siriwardena, M (2021) Enabling lean through human capacity building: an investigation of small and medium contractors. Built Environment Project and Asset Management. ISSN 2044-124X

Rawat, VS, Roshni, T and Carnacina, I (2021) Experimental study of flows over Block Ramps on stability of non-cohesive beds. Arabian Journal for Science and Engineering. ISSN 2193-567X

Ryecroft, S, Shaw, A, Fergus, P, Kot, P, Hashim, KS, Tang, A, Moody, A and Conway, L (2021) An Implementation of a Multi-Hop Underwater Wireless Sensor Network using Bowtie Antenna. Karbala International Journal of Modern Science, 7 (2). ISSN 2405-609X

Saul, E (2021) The Emerging Need for Civil Engineering Design to Embrace a New Systems Approach to the Solution of Complex Problems in Rapidly Changing Technical and Political Landscapes. Current Trends in Civil & Structural Engineering, 7 (2). ISSN 2643-6876

Shah, RK, Al Shereiqi, K and Borthwick, F (2021) A Study of Challenges and Benefits of Lean Construction (LC) Principles in Omani Construction Industry. Journal of Construction Research, 2 (2). pp. 16-29. ISSN 2630-5089

Shah, RK, Layth, K, Matipa, WM and Borthwick, F (2021) Analysing Delay Impact from Potential Risk Factors on Project Delivery of Oil and Gas Pipeline: A Case Study in Iraq. Journal of Construction Research, 2 (2). pp. 42-55. ISSN 2630-5089

Shanbara, HK, Dulaimi, AF, Al-Mansoori, T, Al-Busaltan, S, Herez, M, Sadique, M and Abdel-Wahed, T (2021) The future of eco-friendly cold mix asphalt. Renewable and Sustainable Energy Reviews, 149. ISSN 1364-0321

Shaziayani, WN, Ul-Saufie, AZ, Ahmat, H and Al-Jumeily, D (2021) Coupling of quantile regression into boosted regression trees (BRT) technique in forecasting emission model of PM10 concentration. Air Quality, Atmosphere & Health. ISSN 1873-9318

Shelote, KM, Gavali, HR, Brás, A and Ralegaonkar, RV (2021) Utilization of Co-Fired Blended Ash and Chopped Basalt Fiber in the Development of Sustainable Mortar. Sustainability, 13 (3). ISSN 2071-1050

Shubbar, AAF, Nasr, M, Falah, M and Al-Khafaji, Z (2021) Towards Net Zero Carbon Economy: Improving the Sustainability of Existing Industrial Infrastructures in the UK. Energies, 14 (18). ISSN 1996-1073

Sievert, L, Stancioiu, D and Matthews, C (2021) Active Vibration Control of a Small-Scale Flexible Structure Subject to Moving-Loads and Experimental Validation. Journal of Vibration and Acoustics, 143 (6). ISSN 1048-9002

Torres de Sande, V, Sadique, MM, Pineda, P, Brás, A, Atherton, W and Riley, ML (2021) Potential use of sugar cane bagasse ash as sand replacement for durable concrete. Journal of Building Engineering. ISSN 2352-7102

Trong, DK, Pham, BT, Jalal, FE, Iqbal, M, Roussis, PC, Mamou, A, Ferentinou, M, Vu, DQ, Duc Dam, N, Tran, QA and Asteris, PG (2021) On Random Subspace Optimization-Based Hybrid Computing Models Predicting the California Bearing Ratio of Soils. Materials, 14 (21). ISSN 1996-1944

Tu, Z, Xue, Y, Ren, P, Hao, F, Wang, R, Li, M, Zhang, JF, Ji, Z and Huang, R (2021) A Probability-based Strong Physical Unclonable Function with Strong Machine Learning Immunity. IEEE Electron Device Letters. ISSN 0741-3106

Tumelienė, E, Visockienė, JS and Maliene, V (2021) The Influence of Seasonality on the Multi-Spectral Image Segmentation for Identification of Abandoned Land. Sustainability, 13 (12). ISSN 2071-1050

Van Der Bergh, JM, Miljević, B, Vučetić, S, Šovljanski, O, Markov, S, Riley, ML, Ranogajec, J and Brás, A (2021) Comparison of Microbially Induced Healing Solutions for Crack Repairs of Cement-Based Infrastructure. SUSTAINABILITY, 13 (8).

Vontas, K, Andredaki, M, Georgoulas, A, Miché, N and Marengo, M (2021) The Effect of Hydraulic Diameter on Flow Boiling within Single Rectangular Microchannels and Comparison of Heat Sink Configuration of a Single and Multiple Microchannels. Energies, 14 (20).

Williams, CG and Ojuri, OO (2021) Predictive modelling of soils’ hydraulic conductivity using artificial neural network and multiple linear regression. SN Applied Sciences, 3 (2). ISSN 2523-3963

Yeboah, D and Gkantou, M (2021) Investigation of flexural behaviour of structural timber beams strengthened with NSM basalt and glass FRP bars. Structures, 33. pp. 390-409. ISSN 2352-0124

Conference or Workshop Item

Chabuk, A, Hammood, ZA, Abed, SA, Kadhim, MMA, Hashim, KS, Al-Ansari, N and Laue, J (2021) Noise Level in Textile Industries: Case Study Al-Hillah Textile Factory-Company for Textile Industries, Al-Hillah-Babylon-Iraq. In: IOP Conference Series: Earth and Environmental Science , 790 (1). (First International Virtual Conference on Environment & Natural Resources, 24-25 March 2021, University of Al-Qadisiyah, Iraq).

Georgantzia, E and Gkantou, M (2021) Flexural Buckling of Concrete-Filled Aluminium Alloy CHS Columns: Numerical Modelling and Design. In: Lecture Notes in Civil Engineering , 143. pp. 697-707. (3rd International Conference on Trends and Recent Advances in Civil Engineering, Noida, India).

Kayleigh, E, Abdellatif, M, Amoako-Attah, J, AlQuzweeni, S and Hashim, KS (2021) Mitigating the impact of climate change on UK buildings through zero energy strategies. In: IOP Conference Series : Earth and Environmental Science , 877. (The 7th International Conference on Renewable Energy and Materials Technology (ICOREMT 2021), 1st-2nd September 2021, Erbil, Iraq).

Manewa, RMAS, Siriwardena, M and Wijekoon, KA (2021) Life Cycle Costing in Construction: Current Trends and Emerging Directions. In: 9th World Construction Symposium . pp. 403-412. (The 9th World Construction Symposium, 9-10th July 2021, Sri Lanka - Online).

Markiewicz, J, Lapinski, S, Bochenska, A and Kot, P (2021) The Reliability Assessment of the TLS Registration Methods - The Case Study of the Royal Castle in Warsaw. In: International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives . ("Imaging today – foreseeing tomorrow", XXIVth ISPRS Congress, 05 July 2021 - 09 July 2021, Nice).

Ojuri, O, Mills, G and Seidu, RD (2021) How can value co-creation create social value as management practice for sustainable water supply projects? In: Proceedings of IDoBE . (Proceedings of Centre for the Integrated Delivery of the Built Environment (IDoBE) on Uncertainties in the Built Environment: How can we build a resilient future in the new normal? LSBU, London. UK 21 - 23 Nov 2021, 21 November 2021 - 23 November 2021, LSBU, London. UK 21 - 23 Nov 2021).

Pontes, P, Martins, L, Gonçalves, I, Manetti, L, Andredaki, M, Georgoulas, A, Moreira, ALN and Moita, AS (2021) Fluid flow and heat transfer in microchannel devices for cooling applications: experimental and numerical approaches. In: PROCEEDINGS 15th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics . (ATE-HEFAT 2021, 15th international conference on heat transfer, fluid mechanics and thermodynamics, 25-28 July 2021, Virtual Conference).

Seidu, RD, Ayinla, K, Ojuri, O, Young, B and Momoh, J (2021) Cost Effectiveness of Implementing External Facades System. In: Proceedings of IDoBE . (Proceedings of Centre for the Integrated Delivery of the Built Environment (IDoBE) on Uncertainties in the Built Environment: How can we build a resilient future in the new normal?, 21 November 2021 - 23 November 2021, LSBU, London. UK 21 - 23 Nov 2021).

Smith, H, Amoako-Attah, J, Hashim, R and Hashim, KS (2021) The Success of the Construction Industry's Adoption of the Carbon Assessment Strategy PAS2050. In: IOP Conference Series : Earth and Environmental Science , 877. (The 7th International Conference on Renewable Energy and Materials Technology (ICOREMT 2021), 1st-2nd September 2021, Erbil, Iraq).

Umar, T and Umeokafor, N (2021) A review of the costs of accidents in GCC construction. In: Proceedings of the Joint CIB W099 & W123 Annual International Conference 2021: Good health, Changes & innovations for improved wellbeing in construction . pp. 274-282. (Joint CIB WO99 & W123 Annual International Conference 2021, 09 September 2021 - 10 September 2021, Glasgow).

Zhao, L, Wang, Y and Ge, X (2021) Online Teaching Course Design and Practice of College Physics. In: 2020 International Symposium on Advances in Informatics, Electronics and Education (ISAIEE) . (2020 International Symposium on Advances in Informatics, Electronics and Education (ISAIEE), 17 December 2020 - 19 December 2020, Frankfurt, Germany).

Thesis

Ashworth, S (2021) The evolution of facility management (FM) in the building information modelling (BIM) process: An opportunity to use critical success factors (CSF) for optimising built assets. Doctoral thesis, Liverpool John Moores University.

Greene, J (2021) Electromagnetic Wearable Sensors: A Solution to Non-Invasive Real-Time Monitoring of Biological Markers during Exercise. Doctoral thesis, Liverpool John Moores University.

Kadhim, A (2021) Synthesis of One-Part Alkali-Activated Cement and Albite-Diopside Glass-Ceramic from Calcium-Alumina-Silicate Precursors. Doctoral thesis, Liverpool John Moores University.

Kirwan, J (2021) MECHANICAL PROPERTIES AND CRACK RETARDATION OF GLASS FIBRE MICROASPHALT. Doctoral thesis, Liverpool John Moores University.

Omer, G (2021) Non-destructive electromagnetic sensing technique to determine the level of chloride ions in reinforced concrete structures. Doctoral thesis, Liverpool John Moores University.

Ryecroft, SP (2021) The development of a Novel Geosmin sensor and WSN platform for the deployment of sensors in water catchment areas. Doctoral thesis, Liverpool John Moores University.

Shubbar, A (2021) Development of Unfired Brick Through Alkali Activation Using Waste from Aggregate Recycling Facility as an Alternative to Conventional Fired Clay Brick. Doctoral thesis, Liverpool John Moores University.