A

Abadel, AA, Nasr, MS, Shubbar, A, Hashim, TM and Tuladhar, R (2023) Potential Use of Rendering Mortar Waste Powder as a Cement Replacement Material: Fresh, Mechanical, Durability and Microstructural Properties. Sustainability, 15 (15). ISSN 2071-1050

Abbasi, MH, Abdullah, B, Castaño-Rosa, R, Ahmad, MW and Rostami, A (2023) A framework to identify and prioritise the key sustainability indicators: Assessment of heating systems in the built environment. Sustainable Cities and Society, 95. ISSN 2210-6707

Abdel-Raheem, A, Dulaimi, A, Mohamed, AS, Moussa, GS, Özkılıç, YO, Mashaan, N, Jaya, RP and Abdel-Wahed, T (2023) Investigating the Potential of High-Density Polyethylene and Nano Clay Asphalt-Modified Binders to Enhance the Rutting Resistance of Asphalt Mixture. Sustainability, 15 (18). ISSN 2071-1050

Adesi, M, Ewuga, D, Owusu-Manu, D-G, Boateng, F and Kissi, E (2023) COVID-19 pandemic disruptions and environmental turbulence in architectural, engineering and construction project delivery space. International Journal of Building Pathology and Adaptation. ISSN 2398-4708

Akbar, M, Pan, H, Ou, G, Nikitas, G and Ahmad, B (2023) Seismic Response Compression of Various MSE Walls Based on 3D Modeling. Buildings, 13 (11).

Al Biajawi, MI, Embong, R and Shubbar, A (2023) Engineering properties of self-compacting concrete incorporating coal bottom ash (CBA) as sustainable materials for green concrete: a review. Journal of Building Pathology and Rehabilitation, 8 (2). ISSN 2365-3159

Al-Darraji, F, Sadique, MM, Marolt Cebasek, T, Ganguli, A, Yu, Z and Hashim, K (2023) A Systematic Review of the Geotechnical and Structural Behaviors of Fiber-Reinforced Polymer Composite Piles. Geosciences, 13 (3). ISSN 2076-3263

Al-Hasani, B, Abdellatif, M, Carnacina, I, Harris, C, Ayad, AQ, Maaroof, BF and Zubaidi, SL (2023) Integrated geospatial approach for adaptive rainwater harvesting site selection under the impact of climate change. Stochastic Environmental Research and Risk Assessment. ISSN 1436-3240

Al-Hashimi, O, Hashim, K, Loffill, E, Nakouti, I, Faisal, A and Marolt Cebasek, T (2023) Eco‑friendly remediation of tetracycline antibiotic from polluted water using waste‑derived surface re‑engineered silica sand. Scientific Reports, 13. pp. 1-17. ISSN 2045-2322

Al-Kafaji, M, Al-Busaltan, S, Kadhim, MA, Dulaimi, A, Saghafi, B and Al Hawesah, H (2023) Investigating the Impact of Polymer and Portland Cement on the Crack Resistance of Half-Warm Bituminous Emulsion Mixtures. Sustainability, 15 (21).

Al-Khafaji, R, Dulaimi, A, Jafer, H, Mashaan, NS, Qaidi, S, Obaid, ZS and Jwaida, Z (2023) Stabilization of Soft Soil by a Sustainable Binder Comprises Ground Granulated Blast Slag (GGBS) and Cement Kiln Dust (CKD). Recycling, 8 (1).

Al-sareji, OJ, Abdulzahra, MA, Hussein, TS, Shlakaa, AS, Karhib, MM, Meiczinger, M, Grmasha, RA, Al-Juboori, RA, Somogyi, V, Domokos, E, Idowu, IA, Andredaki, M and Hashim, KS (2023) Removal of Pharmaceuticals from Water Using Laccase Immobilized on Orange Peels Waste-Derived Activated Carbon. Water, 15 (19). ISSN 2073-4441

Al-sareji, OJ, Meiczinger, M, Al-Juboori, RA, Grmasha, RA, Andredaki, M, Somogyi, V, Idowu, IA, Stenger-Kovács, C, Jakab, M, Lengyel, E and Hashim, KS (2023) Efficient removal of pharmaceutical contaminants from water and wastewater using immobilized laccase on activated carbon derived from pomegranate peels. Scientific Reports, 13 (1). ISSN 2045-2322

Al-sareji, OJ, Meiczinger, M, Somogyi, V, Al-Juboori, RA, Grmasha, RA, Stenger-Kovács, C, Jakab, M and Hashim, KS (2023) Removal of emerging pollutants from water using enzyme-immobilized activated carbon from coconut shell. Journal of Environmental Chemical Engineering, 11 (3). ISSN 2213-3437

Ali, SB (2023) STRUCTURAL BEHAVIOUR AND DESIGN OF ALUMINIUM ALLOY-CONCRETE COMPOSITE STRUCTURAL MEMBERS. Doctoral thesis, Liverpool John Moores University.

Alsaffar, AKK, Alquzweeni, SS, Al-Ameer, LR, Ali, AH, Mohamed, A, Aldaihani, HM, Reham, A, Al-Ansari, N, Al-Hashimi, O, Shubbar, A, Khan, MA and Hashim, KS (2023) Development of eco-friendly wall insulation layer utilising the wastes of the packing industry. Heliyon, 9 (11). pp. 1-9.

Amin, M (2023) The Development of a MWCNT-DAO Biosensor for the Detection of Cadaverine in the Assessment of Periodontal Disease. Doctoral thesis, Liverpool John Moores University.

B

Blay-Armah, A, Mohebbi, G, Bahadori-Jahromi, A, Fu, C, Amoako-Attah, J and Barthorpe, M (2023) Evaluation of Embodied Carbon Emissions in UK Supermarket Constructions: A Study on Steel, Brick, and Timber Frameworks with Consideration of End-of-Life Processes. Sustainability, 15 (20).

Bochenska, A, Kot, P, Muradov, M, Markiewicz, J, Zawieska, D, Hess, M and Antoniou, A (2023) Critical evaluation of cultural heritage architectural standard documentation methods across different European countries. In: International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives , XLVIII. pp. 251-258. (29th International CIPA Symposium: Documenting, Understanding, Preserving Cultural Heritage: Humanities and Digital technologies for Shaping the Future, Florence).

Bock, M, Gkantou, M, Theofanous, M, Afshan, S and Yuan, H (2023) Ultimate behaviour of hybrid stainless steel cross-sections. Journal of Constructional Steel Research, 210. ISSN 0143-974X

Boujelbene, M, Mahdi, JM, Dulaimi, A, Ramezanimouziraji, H, Ibrahem, RK, Homod, RZ, Yaïci, W, Talebizadehsardari, P and Keshmiri, A (2023) Revolutionizing heat recovery in shell-and-tube latent heat storage systems: an arc-shaped fin approach. Engineering Applications of Computational Fluid Mechanics, 17 (1). ISSN 1994-2060

Brady, L (2023) Challenges in decarbonising space heating in the UK. In: ASC Proceedings 2023 . pp. 52-59. (Associated Schools of Construction 59th ASC Conference, Liverpool John Moores University).

C

Chippagiri, R, Biswal, D, Mandavgane, S, Brás, A and Ralegaonkar, RV (2023) Life Cycle Assessment of a Sustainable Prefabricated Housing System: A Cradle-to-Site Approach Based on a Small-Scale Experimental Model. Buildings, 13 (4).

D

Davies, FN, Sadique, MM and Amoako-Attah, J (2023) Investigating effective building fabric as a passive cooling technique to combat overheating in UK residential buildings. Engineering Future Sustainability, 1 (2). ISSN 2753-4693

Dulaimi, A, Al Busaltan, S, Mydin, MAO, Lu, D, Özkılıç, YO, Jaya, RP and Ameen, A (2023) Innovative geopolymer-based cold asphalt emulsion mixture as eco-friendly material. Scientific Reports, 13 (1). pp. 1-14. ISSN 2045-2322

Dulaimi, A, Qaidi, S, Al-Busaltan, S, Milad, A, Sadique, M, Kadhim, MA, Al-Khafaji, R and Sabri Sabri, MM (2023) Application of paper sludge ash and incinerated sewage ash in emulsified asphalt cold mixtures. Frontiers in Materials, 9.

E

EDIRISINGHE, VRD (2023) Framework for improved alternatives dispute resolution practice in the Sri Lankan constructions industry. Doctoral thesis, Liverpool John Moores University.

F

Faisal, AAH, Al-Ridah, ZA, Al-Ansari, N, Hassan, WH, Al-Hashimi, O, Ghfar, AA and Hashim, K (2023) Controlling metal ion migration in contaminated groundwater with Iraqi clay barriers for water resource protection. RSC Advances, 13 (24). pp. 16196-16205. ISSN 2046-2069

Faisal, AAH, Rashid, IT, Hassan, WH, Al-Ansari, N, Al-Hashimi, O and Ghfar, AA (2023) Remediation of Silty Clay Soil Contaminated with Metal Ions by Electric Field Technology with the Support of Acidic Injection Wells. Water, Air, & Soil Pollution, 234 (6). ISSN 0049-6979

G

Gao, Y, Liu, X, Ren, S, Li, Y and Zhang, Y (2023) Role of Surface Roughness in Surface Energy Calculation of Aggregate Minerals. Transportation Research Record, 2678 (1). pp. 190-201. ISSN 0361-1981

Garcia, MD and Amoako-Attah, J (2023) Energy performance analysis and assessment of retrofit renewable energy technology for a university building. Engineering Future Sustainability, 1 (2). ISSN 2753-4693

Gkantou, M, Georgantzia, E, Kadhim, A, Kamaris, GS and Sadique, M (2023) Geopolymer concrete-filled aluminium alloy tubular cross-sections. Structures, 51. pp. 528-543. ISSN 2352-0124

Grmasha, RA, Abdulameer, MH, Stenger-Kovács, C, Al-sareji, OJ, Al-Gazali, Z, Al-Juboori, RA, Meiczinger, M and Hashim, KS (2023) Polycyclic aromatic hydrocarbons in the surface water and sediment along Euphrates River system: Occurrence, sources, ecological and health risk assessment. Marine Pollution Bulletin, 187. ISSN 0025-326X

Grmasha, RA, Stenger-Kovács, C, Bedewy, BAH, Al-sareji, OJ, Al-Juboori, RA, Meiczinger, M and Hashim, KS (2023) Ecological and human health risk assessment of polycyclic aromatic hydrocarbons (PAH) in Tigris river near the oil refineries in Iraq. Environmental Research, 227. ISSN 0013-9351

H

Hajalifard, Z, Mousazadeh, M, Khademi, S, Khademi, N, Jamadi, MH and Sillanpää, M (2023) The efficacious of AOP-based processes in concert with electrocoagulation in abatement of CECs from water/wastewater. npj Clean Water, 6 (1).

Hashim, KS, Alsaffar, AKK, Alkizwini, RS, Ali, AH, López-Maldonado, EA, Salman, JM, Alenezi, SM, Salmon, P, Abu Hasan, H and Al-Ansari, N (2023) Adsorption of fluoride on a green adsorbent derived from wastepaper: Kinetic, isotherm and characterisation study. Case Studies in Chemical and Environmental Engineering, 8. ISSN 2666-0164

Hu, J, Wang, Y, Wang, D, Du, H, Fan, J, Liu, Y and Sun, X (2023) Indices for dynamic evaluation of indoor humidity and thermal environment. Communications Engineering, 2 (1).

J

Jalal Kashesh, G, Joni, HH, Dulaimi, A and Jalal Kaishesh, A (2023) Laboratory investigation on the performance of asphalt bitumen using recycled tyre rubber produced in Iraq. Materials Today: Proceedings. ISSN 2214-7853

Jannat, N (2023) Development of agro-wastes based unfired earth blocks to improve indoor thermal comfort in tropics. Doctoral thesis, Liverpool John Moores University.

Jayanetti, JKDDT, Perera, BAKS, Waidyasekara, KGAS and Siriwardena, M (2023) Critical Analysis of Lean Construction Maturity Models: A Systematic Literature Review. Buildings, 13 (6). ISSN 2075-5309

Jayasena, HS, Thurairajah, N, Perera, BAKS and Siriwardena, M (2023) Affordance-led framework of understanding of BIM adoption. Archnet-IJAR - International Journal of Architectural Research. ISSN 2631-6862

Jwaida, Z, Dulaimi, A, Mashaan, N and Othuman Mydin, MA (2023) Geopolymers: The Green Alternative to Traditional Materials for Engineering Applications. Infrastructures, 8 (6).

Jwaida, Z, Dulaimi, A, Mydin, MAO, Özkılıç, YO, Jaya, RP and Ameen, A (2023) The Use of Waste Polymers in Asphalt Mixtures: Bibliometric Analysis and Systematic Review. Journal of Composites Science, 7 (10).

K

Karyono, K (2023) A Novel Indoor Adaptive Thermal Comfort System to Reduce the Energy Consumption for the Residential Dwellings. Doctoral thesis, LJMU.

Khairan, HE, Zubaidi, SL, Al-Mukhtar, M, Dulaimi, A, Al-Bugharbee, H, Al-Faraj, FA and Ridha, HM (2023) Assessing the Potential of Hybrid-Based Metaheuristic Algorithms Integrated with ANNs for Accurate Reference Evapotranspiration Forecasting. Sustainability, 15 (19). ISSN 2071-1050

Khan, SU, Khalid, M, Hashim, K, Jamadi, MH, Mousazadeh, M, Basheer, F and Farooqi, IH (2023) Efficacy of Electrocoagulation Treatment for the abatement of Heavy Metals: An Overview of Critical Processing Factors, Kinetic Models and Cost Analysis. Sustainability, 15 (2). ISSN 2071-1050

L

Latham, K (2023) REAL-TIME VISUALISATION AND ANALYSIS OF TACTILE INFORMATION USING FORCE SENSORS DURING ARTERIAL THREADING. Doctoral thesis, Liverpool John Moores University.

Li, Y, Bai, T, Zhang, J and Gao, Y (2023) Advances in Regenerated Asphalt Mixtures. Materials, 16 (7). ISSN 1996-1944

Li, Y, Du, H and Kumaraswamy, SB (2023) Case-based reasoning approach for decision-making in building retrofit: A review. Building and Environment, 248. p. 111030. ISSN 0360-1323

Lu, J, Zhang, M, Feng, J, Gao, Y, Yang, Y, Li, Y and Li, L (2023) Investigation on the technical performance and workability of hot-melting road marking materials using for the high-altitude area. Case Studies in Construction Materials, 18. ISSN 2214-5095

M

Maaroof, BF, Al-Musawi, MA, Kareem, HH, Al-Abdan, RH, Obaid, HS, AL- Hasani, B, Abdellatif, M and Carnacina, I (2023) Geographical Assessment of the Natural Environment at Al-Huwaizah Marsh, Eastern Of Misan Governorate (Iraq). Misan Journal for Academic Studies, 22 (46). p. 188. ISSN 1994-697X

Maaroof, BF, Omran, MH, Al-Qaim, FF, Salman, JM, Hussain, BN, Abdellatif, M, Carnacina, I, Al-Hasani, B, Jawad, MR and Hussein, WA (2023) Environmental Assesment Of Al-Hillah River Pollution at Babil Governorate (IRAQ). Journal of the Geographical Institute Jovan Cvijic SASA, 73 (1). pp. 1-16. ISSN 0350-7599

Maliene, V, Halleux, JM, Hendricks, A and Nadahl, B (2023) Public Value Capture of Increasing Property Values across Europe. vdf Hochschulverlag AG an der ETH Zürich. ISBN 9783728141477

Manewa, R, Anagal, V and Siriwardena, ML (2023) Industry Academia Co-operation for Sustainable Built Environment Ecosystem. In: Going Global Partnerships programmes in Higher Education conference’, 18 September 23, New Delhi, India.

Manewa, R, Satins, M and Siriwardena, M (2023) Causes of Cost Overruns due to Outsourced Labour – Subcontractor’s Perspectives. In: ASC Proceedings 2023 . pp. 707-715. (59th Annual Associated Schools of Construction International Conference, Liverpool, UK).

Markiewicz, J, Kot, P, Markiewicz, L and Muradov, M (2023) The evaluation of hand-crafted and learned-based features in Terrestrial Laser Scanning – Structure-from Motion (TLS-SfM) indoor point cloud registration – the case study of cultural heritage objects and public interiors. Heritage Science, 11. ISSN 2050-7445

Markiewicz, J, Kowalczyk, M, Karwel, K, Kot, P and Markiewicz, L (2023) The Evaluation of Structure-From-Motion Workflow With the Tls Synthetic Images Simulator – The Cultural Heritage Approach. In: International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives . (29th International CIPA Symposium: Documenting, Understanding, Preserving Cultural Heritage: Humanities and Digital technologies for Shaping the Future, Florence).

McKenzie, LMCS, Lee, D and Amoako-Attah, J (2023) Analysis of Hydrogen Production Methods Using the Analytic Hierarchy Process. Engineering Future Sustainability, 1 (1). ISSN 2753-4693

Mohammed, H (2023) Development of chloride resistant self-healing concrete with bio-agent immobilised polymer. Doctoral thesis, Liverpool John Moores University.

Mohammed, H, Giuntini, F, Simm, A, Sadique, M, Shaw, A, Nakouti, I and Bras, A (2023) Biomineralisation to improve properties of polymer modified concrete for chloride environments. Construction and Building Materials, 379. ISSN 0950-0618

Mohammed, SJ, Zubaidi, SL, Al-Ansari, N, Mohammed Ridha, H, Dulaimi, A and Al-Khafaji, R (2023) Application of Metaheuristic Algorithms and ANN Model for Univariate Water Level Forecasting. Advances in Civil Engineering, 2023. pp. 1-15. ISSN 1687-8086

Mousazadeh, M, Khademi, N, Kabdaşlı, I, Rezaei, S, Hajalifard, Z, Moosakhani, Z and Hashim, K (2023) Domestic greywater treatment using electrocoagulation-electrooxidation process: optimisation and experimental approaches. Scientific Reports, 13 (1).

Murtiyoso, A, Markiewicz, J, Karwel, AK and Kot, P (2023) INVESTIGATION ON THE USE OF NeRF FOR HERITAGE 3D DENSE RECONSTRUCTION FOR INTERIOR SPACES. In: International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives , XLVIII. pp. 115-121. (2nd International Workshop on Evaluation and Benchmarking of Sensors, Systems and Geospatial Data in Photogrammetry and Remote Sensing, 23rd October - 24th October 2023, Krakow, Poland).

Muzamhindo, H and Ferentinou, M (2023) Generic compressional strength prediction model applicable to multiple lithologies based on a broad global database. Probabilistic Engineering Mechanics, 71. ISSN 0266-8920

Mydin, MAO, Abdullah, MMAB, Hamah Sor, N, Omar, R, Dulaimi, A, Awoyera, PO, Althoey, F and Deifalla, AF (2023) Thermal conductivity, microstructure and hardened characteristics of foamed concrete composite reinforced with raffia fiber. Journal of Materials Research and Technology, 26. pp. 850-864. ISSN 2238-7854

Mydin, MAO, Jagadesh, P, Bahrami, A, Dulaimi, A, Özkılıç, YO, Abdullah, MMAB and Jaya, RP (2023) Use of calcium carbonate nanoparticles in production of nano-engineered foamed concrete. Journal of Materials Research and Technology, 26. pp. 4405-4422. ISSN 2238-7854

N

Nasr, MS, Salman, AJ, Ghayyib, RJ, Shubbar, A, Al-Mamoori, S, Al-khafaji, Z, Hashim, TM, Hasan, ZA and Sadique, MM (2023) Effect of Clay Brick Waste Powder on the Fresh and Hardened Properties of Self-Compacting Concrete: State-of-the-Art and Life Cycle Assessment. Energies, 16 (12).

Nasr, MS, Shubbar, A, Hashim, TM and Abadel, AA (2023) Properties of a Low-Carbon Binder-Based Mortar Made with Waste LCD Glass and Waste Rope (Nylon) Fibers. Processes, 11 (5).

Nikitas, G and Bhattacharya, S (2023) Experimental study on sand-tire chip mixture foundations acting as a soil liquefaction countermeasure. Bulletin of Earthquake Engineering. ISSN 1570-761X

Niu, D, Zhang, Z, Gao, Y, Li, Y, Yang, Z and Niu, Y (2023) Effect of pretreated cow dung fiber on rheological and fatigue properties of asphalt binder. Cellulose, 30. pp. 3773-3791. ISSN 0969-0239

O

Omoregie, AI, Muda, K, Ong, DEL, Ojuri, OO, Bin Bakri, MK, Rahman, MR, Basri, HF and Ling, YE (2023) Soil bio-cementation treatment strategies: state-of-the-art review. Geotechnical Research. pp. 1-25.

Omotayo, OO, Ojuri, OO and Olagunju, OO (2023) Enhancing Geotechnical Properties of Lateritic Clay with Sawdust Ash-Lime Stabilizer. Journal of Engineering Advancements. pp. 8-13. ISSN 2708-6429

Othuman Mydin, MA, Mohd Nawi, MN, Omar, R, Dulaimi, A, Najm, HM, Mahmood, S and Sabri Sabri, MM (2023) Mechanical, durability and thermal properties of foamed concrete reinforced with synthetic twisted bundle macro-fibers. Frontiers in Materials, 10.

Oyegoke, AS, Fisher, BW, Ajayi, S, Omotayo, TS and Ewuga, D (2023) The disruptive factors and longevity effects of Covid-19 and Brexit on the SMEs construction supply chain in the UK. Journal of Financial Management of Property and Construction. ISSN 1366-4387

P

Pannozzo, N, Leonardi, N, Carnacina, I and Smedley, RK (2023) Storm sediment contribution to salt marsh accretion and expansion. Geomorphology, 430. ISSN 0169-555X

Pannozzo, N, Smedley, R, Plater, A, Carnacina, I and Leonardi, N (2023) Novel luminescence diagnosis of storm deposition across intertidal environments. The Science of the total environment, 867. ISSN 0048-9697

Q

Qaidi, S, Al-Kamaki, Y, Hakeem, I, Dulaimi, AF, Özkılıç, Y, Sabri, M and Sergeev, V (2023) Investigation of the physical-mechanical properties and durability of high-strength concrete with recycled PET as a partial replacement for fine aggregates. Frontiers in Materials, 10.

R

Ram, M, Baltzopoulos, V, Shaw, A, Maganaris, CN, Cullen, J, O'Brien, TD and Kot, P (2023) A Novel Smart Shoe Instrumented with Sensors for Quantifying Foot Placement and Clearance during Stair Negotiation. Sensors, 23 (24). ISSN 1424-8220

Rashid, FL, Al-Obaidi, MA, Dulaimi, A, Bahlol, HY and Hasan, A (2023) Recent Advances, Development, and Impact of Using Phase Change Materials as Thermal Energy Storage in Different Solar Energy Systems: A Review. Designs, 7 (3). p. 66.

Rashid, FL, Al-Obaidi, MA, Dulaimi, A, Bernardo, LFA, Eleiwi, MA, Mahood, HB and Hashim, A (2023) A Review of Recent Improvements, Developments, Effects, and Challenges on Using Phase-Change Materials in Concrete for Thermal Energy Storage and Release. Journal of Composites Science, 7 (9).

Rashid, FL, Al-Obaidi, MA, Dulaimi, A, Bernardo, LFA, Redha, ZAA, Hoshi, HA, Mahood, HB and Hashim, A (2023) Recent Advances on The Applications of Phase Change Materials in Cold Thermal Energy Storage: A Critical Review. Journal of Composites Science, 7 (8).

Rashid, FL, Al-Obaidi, MA, Dulaimi, A, Mahmood, DMN and Sopian, K (2023) A Review of Recent Improvements, Developments, and Effects of Using Phase-Change Materials in Buildings to Store Thermal Energy. Design, 7 (4). pp. 1-38.

Rashid, FL, Mohammed, HI, Dulaimi, A, Al-Obaidi, MA, Talebizadehsardari, P, Ahmad, S and Ameen, A (2023) Analysis of heat transfer in various cavity geometries with and without nano-enhanced phase change material: A review. Energy Reports, 10. pp. 3757-3779.

Ren, S, Liu, X, Gao, Y, Jing, R, Lin, P, Erkens, S and Wang, H (2023) Molecular dynamics simulation and experimental validation on the interfacial diffusion behaviors of rejuvenators in aged bitumen. Materials and Design, 226. ISSN 0264-1275

Ridwan, R, Jemaa, Y and Yuniarto, E (2023) Various Methods of Strengthening Reinforced Concrete Beam-Column Joint Subjected Earthquake-Type Loading Using Fibre-Reinforced Polymers: A Critical Review. Journal of Applied Materials and Technology, 4 (2). pp. 42-55. ISSN 2721-446X

S

Sadique, PM and de Sande, VT (2023) Environmental Benefits of Using Activated Sugarcane Bagasse Ash in Cementitious Materials. Proceedings of 59th Annual Associated Schools of Construction International Conference, 4. pp. 723-731.

Sattar, S, Alaiwi, Y, Radhi, NS, Al-Khafaji, Z, Al-Hashimi, O, Alzahrani, H and Yaseen, ZM (2023) Corrosion reduction in steam turbine blades using nano-composite coating. Journal of King Saud University - Science, 35 (8). ISSN 1018-3647

Shah, R and Shrestha, B (2023) A Study of Prospective Barriers, Benefits and Measures for Building Information Modeling (BIM) Adoption in Nepalese AEC Industry. Journal of Smart Buildings and Construction Technology, 05 (01).

Shi, B, Liu, Q, Gao, Y, Wu, J and Chen, J (2023) Analysis of the cohesion/adhesion proportion around bitumen-mineral failure interface under tensile loading. Construction and Building Materials, 399. ISSN 0950-0618

Shubbar, A, Nasr, MS, Kadhim, A, Hashim, TM and Sadique, M (2023) Performance Comparison of 45° and 90° Herringboned Permeable Interlocking Concrete Pavement. Infrastructures, 8 (5).

U

Umeokafor, N and Umar, T (2023) Barriers to Big Data Techniques Application in Construction Safety, Health and Wellbeing. In: Handbook of Construction Safety, Health and Well-being in the Industry 4.0 Era. Taylor & Francis. ISBN 9781032079929

V

Van Der Bergh, JM (2023) Bio-inspired Bacteria-based Concrete for Durability Increase of Structures. Doctoral thesis, Liverpool John Moores University.

X

Xu, S, Li, G, Zhang, H, Xie, M, Mendis, T and Du, H (2023) Effect of Block Morphology on Building Energy Consumption of Office Blocks: A Case of Wuhan, China. Buildings, 13 (3). ISSN 2075-5309

Y

Yousif, MG, Hashim, K and Rawaf, S (2023) Post COVID-19 Effect on Medical Staff and Doctors' Productivity Analysed by Machine Learning. Baghdad Science Journal, 20 (4). pp. 1507-1519. ISSN 2078-8665

Z

Zabielaitė-Skirmantė, M, Burinskienė, M and Maliene, V (2023) Influence of Revitalization on the Social and Economic Well-Being of Residents: Case Study of Lithuania. Sustainability, 15 (9).

Zhang, D, Yu, P, Liu, Z, Liu, Z, Chen, H and Gao, Y (2023) Influence of acidity and alkalinity of water environments on the water stability of asphalt mixture: Phase I - molecular dynamics simulation. Construction and Building Materials, 411. ISSN 0950-0618

Zhour, F, Abdellatif, M, Osman, Y and Lee, D (2023) Comparison between the life cycle carbon footprint of refurbished and new buildings: A case study of Community centre. Journal of Building Design and Environment, 2 (1). ISSN 2811-0730

Zou, Y, Gao, Y, Chen, A, Wu, S, Li, Y, Xu, H, Wang, H, Yang, Y and Amirkhanian, S (2023) Adhesion failure mechanism of asphalt-aggregate interface under an extreme saline environment: A molecular dynamics study. Applied Surface Science, 645. ISSN 0169-4332