Alharbi, WNH (2018) Development of a Closed Loop Control System for Vibratory Milling. Doctoral thesis, Liverpool John Moores University.

Bashir, M (2018) Seismic Analysis of a 10 MW Offshore Wind Turbine With a Monopile. In: Proceedings of The 7th Asia Conference on Earthquake Engineering . (7th Asia Conference on Earthquake Engineering, 22-25th November 2018, Bangkok, Thailand).

Bechcinski, G, Ewad, H, Tsiakoumis, V, Pawlowski, W, Kepczak, N, McMillan, A and Batako, ADL (2018) A model and application of vibratory surface grinding. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 140 (10). ISSN 1087-1357

Chen, X, Cao, H and Li, H (2018) Dressing Strategy and Grinding Control for Cylindrical Microstructural Surface. International Journal of Advanced Manufacturing Technology, 99. pp. 707-727. ISSN 0268-3768

Chen, Y, Chen, X, Xu, X and Yu, G (2018) Effect of Energy Consumption in Contact Zone on Machining Conditions Optimization in Precision Surface Grinding. Journal of Mechanical Engineering, 64.

Chen, Y, Chen, X, Xu, X and Yu, G (2018) Quantitative impacts of regenerative vibration and abrasive wheel eccentricity on surface grinding dynamic performance. International Journal of Advanced Manufacturing Technology, 96. pp. 2271-2283. ISSN 0268-3768

Holesovsky, MN, Pan, B, Morgan, MN and Czan, A (2018) Evaluation of Diamond Dressing Effect on Workpiece Surface Roughness by Way of Analysis of Variance. Tehnicki Vjesnik, 25 (1). pp. 165-169. ISSN 1330-3651

Kalaman, S, Yasar, H, Ekmekci, N, Opoz, TT and Ekmekci, B (2018) Powder Mixed Electrical Discharge Machining and Biocompatibility: A State of the Art Review. In: The 18th International Conference on Machine Design and Production , 2. (The 18th International Conference on Machine Design and Production, 03 July 2018 - 06 July 2018, Eskisehir, Turkey).

Maklad, O, Theofilis, V and Elsheikh, A (2018) Role of impinging jets in the biomechanical correction of the intraocular pressure ( IOP ) measurement. In: Proceedings of International Conference of Fluid Dynamics (13). (Thirteenth International Conference of Fluid Dynamics, 21 December 2018 - 22 December 2018, Cairo, Egypt).

Mao, Q, Ma, H, Zhang, X and Zhang, G (2018) An Improved Skewness Decision Tree SVM Algorithm for the Classification of Steel Cord Conveyor Belt Defects. Applied Sciences, 8 (12). ISSN 2076-3417

Mason, A, Soprani, M, Korostynska, O, Amirthalingam, A, Cullen, J, Muradov, M, Carmona, EN, Sberveglieri, G, Sberveglieri, V and Al-Shamma'a, A (2018) Real-Time Microwave, Dielectric, and Optical Sensing of Lincomycin and Tylosin Antibiotics in Water: Sensor Fusion for Environmental Safety. Journal of Sensors, 2018. ISSN 1687-725X

McLoughlin, BJ, Pointon, HAG, McLoughlin, JP, Shaw, A and Bezombes, FA (2018) Uncertainty Characterisation of Mobile Robot Localisation Techniques using Optical Surveying Grade Instruments. Sensors, 18 (7). ISSN 1424-8220

Ogbomo, OO, Amalu, EH, Ekere, NN and Olagbegi, PO (2018) Effect of operating temperature on degradation of solder joints in crystalline silicon photovoltaic modules for improved reliability in hot climates. Solar Energy, 170. pp. 682-693. ISSN 0038-092X

Opoz, TT, Yasar, H, Ekmekci, N and Ekmekci, B (2018) Particle Migration and Surface Modification on Ti6Al4V in SiC Powder Mixed Electrical Discharge Machining. Journal of Manufacturing Processes, 31. pp. 744-758. ISSN 1526-6125

Opoz, TT, Yasar, H, Murphy, MF, Ekmekci, N and Ekmekci, B (2018) TI6AL4V Surface Modification by Hydroxyapatite Powder Mixed Electric Discharge Machining for Medical Application. In: 18th International Conference on Machine Design and Production , 2. (18th International Conference on Machine Design and Production, 03 July 2018 - 06 July 2018, Eskisehir, Turkey).

Poo, MC-P, Dimitriu, D, Qu, Z, Galatioto, F, Rushton, C, Lee, P and Yang, Z (2018) Prioritizing Vehicle Cleanliness (PVC) using Key Green Performance Indicators (KGPI). In: Proceedings of PROLOG 2018 . (PROLOG 2018 conference, 28 June 2018 - 29 June 2018, UK).

Qi, A, Zhang, G, Dong, M, Ma, H-W and Harvey, D (2018) An artificial bee colony optimization based matching pursuit approach for ultrasonic echo estimation. Ultrasonics, 88. ISSN 0041-624X

Sam-Odusina, T (2018) A coordinated UAV deployment based on stereovision reconnaissance for low risk water assessment. Doctoral thesis, Liverpool John Moores University.

Vereschaka, A, Aksenenko, A, Sitnikov, N, Migranov, M, Shevchenko, S, Sotova, C, Batako, ADL and Andreev, N (2018) Effect of adhesion and tribological properties of modified composite nano-structured multi-layer nitride coatings on WC-Co tools life. Tribology International, 128. pp. 313-327. ISSN 1879-2464

Vereschaka, AA, Grigoriev, S, Sitnikov, NN, Bublikov, JI and Batako, ADL (2018) Effect produced by thickness of nanolayers of multilayer composite wear-resistant coating on tool life of metal-cutting tool in turning of steel AISI 321. In: Procedia CIRP , 77. pp. 549-552. (8th CIRP Conference on High Performance Cutting (HPC 2018), 25-27 June 2018, Budapest, Hungary).

Wharton, JT (2018) Structural Functional Surface Design and Manufacture. Doctoral thesis, Liverpool John Moores University.

Yang, Y, Bashir, M, Li, C, Wang, J and Loughney, S (2018) Analysis of the Dynamic Behaviour of 10mw Bottom-Fixed Offshore Wind Turbines. In: Proceedings of 3rd International Conference of Offshore Renewable-energy (CORE) . pp. 40-47. (3rd International Conference of Offshore Renewable-energy (CORE), 27 August 2018 - 28 August 2018, Glasgow).

Zhang, G, Wang, X, Ma, H-W, Zhang, Y and Wang, D (2018) Measurement of 3D Ultrasonic Wavefield Using Pulsed Laser Holographic Microscopy for Ultrasonic Nondestructive Evaluation. Sensors, 18 (2). ISSN 1424-8220

Zhen, L, Yuan, S, Song, H and Batako, ADL (2018) A cutting force model based on kinematics analysis for C/SiC in rotary ultrasonic face machining. International Journal of Advanced Manufacturing Technology, 97. pp. 1223-1239. ISSN 0268-3768

Zubkov, N, Poptsov, V, Vasiliev, S and Batako, ADL (2018) Steel Case Hardening Using Deformational cutting. Journal of Manufacturing Science and Engineering, 140 (6). ISSN 1528-8935