A

Alharbi, WNH (2018) Development of a Closed Loop Control System for Vibratory Milling. Doctoral thesis, Liverpool John Moores University.

B

Bashir, M (2018) Seismic Analysis of a 10 MW Offshore Wind Turbine With a Monopile. In: Proceedings of The 7th Asia Conference on Earthquake Engineering . (7th Asia Conference on Earthquake Engineering, 22-25th November 2018, Bangkok, Thailand).

Bechcinski, G, Ewad, H, Tsiakoumis, V, Pawlowski, W, Kepczak, N, McMillan, A and Batako, ADL (2018) A model and application of vibratory surface grinding. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 140 (10). ISSN 1087-1357

C

Chen, X, Cao, H and Li, H (2018) Dressing Strategy and Grinding Control for Cylindrical Microstructural Surface. International Journal of Advanced Manufacturing Technology, 99. pp. 707-727. ISSN 0268-3768

Chen, Y, Chen, X, Xu, X and Yu, G (2018) Effect of Energy Consumption in Contact Zone on Machining Conditions Optimization in Precision Surface Grinding. Journal of Mechanical Engineering, 64.

Chen, Y, Chen, X, Xu, X and Yu, G (2018) Quantitative impacts of regenerative vibration and abrasive wheel eccentricity on surface grinding dynamic performance. International Journal of Advanced Manufacturing Technology, 96. pp. 2271-2283. ISSN 0268-3768

H

Holesovsky, MN, Pan, B, Morgan, MN and Czan, A (2018) Evaluation of Diamond Dressing Effect on Workpiece Surface Roughness by Way of Analysis of Variance. Tehnicki Vjesnik, 25 (1). pp. 165-169. ISSN 1330-3651

K

Kalaman, S, Yasar, H, Ekmekci, N, Opoz, TT and Ekmekci, B (2018) Powder Mixed Electrical Discharge Machining and Biocompatibility: A State of the Art Review. In: The 18th International Conference on Machine Design and Production , 2. (The 18th International Conference on Machine Design and Production, 03 July 2018 - 06 July 2018, Eskisehir, Turkey).

M

Maklad, O, Theofilis, V and Elsheikh, A (2018) Role of impinging jets in the biomechanical correction of the intraocular pressure ( IOP ) measurement. In: Proceedings of International Conference of Fluid Dynamics (13). (Thirteenth International Conference of Fluid Dynamics, 21 December 2018 - 22 December 2018, Cairo, Egypt).

Mao, Q, Ma, H, Zhang, X and Zhang, G (2018) An Improved Skewness Decision Tree SVM Algorithm for the Classification of Steel Cord Conveyor Belt Defects. Applied Sciences, 8 (12). ISSN 2076-3417

Mason, A, Soprani, M, Korostynska, O, Amirthalingam, A, Cullen, J, Muradov, M, Carmona, EN, Sberveglieri, G, Sberveglieri, V and Al-Shamma'a, A (2018) Real-Time Microwave, Dielectric, and Optical Sensing of Lincomycin and Tylosin Antibiotics in Water: Sensor Fusion for Environmental Safety. Journal of Sensors, 2018. ISSN 1687-725X

McLoughlin, BJ, Pointon, HAG, McLoughlin, JP, Shaw, A and Bezombes, FA (2018) Uncertainty Characterisation of Mobile Robot Localisation Techniques using Optical Surveying Grade Instruments. Sensors, 18 (7). ISSN 1424-8220

O

Ogbomo, OO, Amalu, EH, Ekere, NN and Olagbegi, PO (2018) Effect of operating temperature on degradation of solder joints in crystalline silicon photovoltaic modules for improved reliability in hot climates. Solar Energy, 170. pp. 682-693. ISSN 0038-092X

Opoz, TT, Yasar, H, Ekmekci, N and Ekmekci, B (2018) Particle Migration and Surface Modification on Ti6Al4V in SiC Powder Mixed Electrical Discharge Machining. Journal of Manufacturing Processes, 31. pp. 744-758. ISSN 1526-6125

Opoz, TT, Yasar, H, Murphy, MF, Ekmekci, N and Ekmekci, B (2018) TI6AL4V Surface Modification by Hydroxyapatite Powder Mixed Electric Discharge Machining for Medical Application. In: 18th International Conference on Machine Design and Production , 2. (18th International Conference on Machine Design and Production, 03 July 2018 - 06 July 2018, Eskisehir, Turkey).

P

Poo, MC-P, Dimitriu, D, Qu, Z, Galatioto, F, Rushton, C, Lee, P and Yang, Z (2018) Prioritizing Vehicle Cleanliness (PVC) using Key Green Performance Indicators (KGPI). In: Proceedings of PROLOG 2018 . (PROLOG 2018 conference, 28 June 2018 - 29 June 2018, UK).

Q

Qi, A, Zhang, G, Dong, M, Ma, H-W and Harvey, D (2018) An artificial bee colony optimization based matching pursuit approach for ultrasonic echo estimation. Ultrasonics, 88. ISSN 0041-624X

S

Sam-Odusina, T (2018) A coordinated UAV deployment based on stereovision reconnaissance for low risk water assessment. Doctoral thesis, Liverpool John Moores University.

V

Vereschaka, A, Aksenenko, A, Sitnikov, N, Migranov, M, Shevchenko, S, Sotova, C, Batako, ADL and Andreev, N (2018) Effect of adhesion and tribological properties of modified composite nano-structured multi-layer nitride coatings on WC-Co tools life. Tribology International, 128. pp. 313-327. ISSN 1879-2464

Vereschaka, AA, Grigoriev, S, Sitnikov, NN, Bublikov, JI and Batako, ADL (2018) Effect produced by thickness of nanolayers of multilayer composite wear-resistant coating on tool life of metal-cutting tool in turning of steel AISI 321. In: Procedia CIRP , 77. pp. 549-552. (8th CIRP Conference on High Performance Cutting (HPC 2018), 25-27 June 2018, Budapest, Hungary).

W

Wharton, JT (2018) Structural Functional Surface Design and Manufacture. Doctoral thesis, Liverpool John Moores University.

Y

Yang, Y, Bashir, M, Li, C, Wang, J and Loughney, S (2018) Analysis of the Dynamic Behaviour of 10mw Bottom-Fixed Offshore Wind Turbines. In: Proceedings of 3rd International Conference of Offshore Renewable-energy (CORE) . pp. 40-47. (3rd International Conference of Offshore Renewable-energy (CORE), 27 August 2018 - 28 August 2018, Glasgow).

Z

Zhang, G, Wang, X, Ma, H-W, Zhang, Y and Wang, D (2018) Measurement of 3D Ultrasonic Wavefield Using Pulsed Laser Holographic Microscopy for Ultrasonic Nondestructive Evaluation. Sensors, 18 (2). ISSN 1424-8220

Zhen, L, Yuan, S, Song, H and Batako, ADL (2018) A cutting force model based on kinematics analysis for C/SiC in rotary ultrasonic face machining. International Journal of Advanced Manufacturing Technology, 97. pp. 1223-1239. ISSN 0268-3768

Zubkov, N, Poptsov, V, Vasiliev, S and Batako, ADL (2018) Steel Case Hardening Using Deformational cutting. Journal of Manufacturing Science and Engineering, 140 (6). ISSN 1528-8935