Article

Abdel-Wahed, T and Al Nageim, H (2016) Investigating the effects of cement and cement kiln dust as a filler on the mechanical properties of cold bituminous emulsion mixtures. International Journal of Civil Engineering and Technology, 7 (1). pp. 441-453. ISSN 0976-6308

Abdel-Wahed, T, Dulaimi, A, Shanbara, HK and Al Nageim, H (2022) The Impact of Cement Kiln Dust and Cement on Cold Mix Asphalt Characteristics at Different Climate. Sustainability (Switzerland), 14 (7). p. 4173.

Ahuir Torres, J, Kotadia, H, Opoz, T and Sharp, MC (2023) A Study on the Corrosion Behaviour of Laser Textured Pure Aluminium in Saltwater. Processes, 11 (3). ISSN 2227-9717

Ahuir-Torres, JI, Gibbons, GJ, West, G, Das, A and Kotadia, HR (2023) Understanding the corrosion behaviour of Al-Mg alloy fabricated using a Laser Powder Bed Fusion (L-PBF) Additive Manufacturing (AM) process. Journal of Alloys and Compounds, 969. ISSN 0925-8388

Al-Baghdadi, HM, Shubbar, AAF and Al-Khafaji, ZS (2021) The Impact of Rice Husks Ash on Some Mechanical Features of Reactive Powder Concrete with High Sulfate Content in Fine Aggregate. International Review of Civil Engineering (IRECE), 12 (4). pp. 248-254. ISSN 2036-9913

Al-Mahdy, A, Kotadia, H, Sharp, MC, Opoz, T, Mullett, J and Ahuir Torres, JI (2022) Effect of Surface Roughness on the Surface Texturing of 316l Stainless Steel by Nanosecond Pulsed Laser. Lasers in Manufacturing and Materials Processing. ISSN 2196-7237

Al-attabi, A, Hashim, KS, Jafer, HM and Alzeyadi, A (2016) Removal of Nitrogen Compounds from Industrial Wastewater Using Sequencing Batch Reactor: The Effects of React Time. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 10 (7).

Alattabi, AW, Harris, CB, Al Khaddar, RM and Alzeyadi, A (2016) The Relationship between Operating Condition and Sludge Wasting of an Aerobic Suspension Sequencing Batch Reactor (ASSBR) Treating Phenolic Wastewater. 2nd BUiD Annual Doctoral Research Conference 2016.

Ateeq, M and Al-Shamma'a, A (2016) Experimental study on the optimisation of chemical treatment to reduce waste rubber aggregates absorption properties. Construction and Building Materials, 126. ISSN 0950-0618

Ateeq, M, Shaw, A, Garrett, R and Dickson, P (2017) A Proof of Concept Study on Utilising a Non-invasive Microwave Analysis Technique to Characterise Silver Based Materials in Aqueous Solution. Sensing and Imaging: An International Journal, 18 (13). ISSN 1557-2064

Cashman, S, Korostynska, O, Shaw, A, Lisboa, P and Conroy, L (2017) Detecting the presence and concentration of nitrate in water using microwave spectroscopy. IEEE Sensors Journal (99). ISSN 1530-437X

Csók, Z, Szuroczki, P, Kollár, L, Ngo, HM, Ledoux-Rak, I, Caturello, NAMS and Albuquerque, RQ (2015) Intramolecular Cooperative Effects in Multichromophoric Cavitands Exhibiting Nonlinear Optical Properties. Journal of Physical Chemistry C, 119 (22). pp. 12608-12615. ISSN 1932-7447

Emamjomeh, MM, Mousazadeh, M, Mokhtari, N, Jamali, HA, Makkiabadi, M, Naghdali, Z, Hashim, KS and Ghanbari, R (2019) Simultaneous removal of phenol and linear alkylbenzene sulfonate from automotive service station wastewater: Optimization of coupled electrochemical and physical processes. Separation Science and Technology. ISSN 0149-6395

Faisal, AAH, Al-Ridah, ZA, Al-Ansari, N, Hassan, WH, Al-Hashimi, O, Ghfar, AA and Hashim, K (2023) Controlling metal ion migration in contaminated groundwater with Iraqi clay barriers for water resource protection. RSC Advances, 13 (24). pp. 16196-16205. ISSN 2046-2069

Faisal, AAH, Alkhateeb, RW, Al-Hashimi, OA, Shubbar, AAF and Saleh, B (2021) Removal of zinc, lead and nickel from contaminated soil by electro-kinetic technology under the influence of washing and buoyance forces with different purging solutions. Separation Science and Technology. ISSN 0149-6395

Faisal, AAH, Nassir, ZS, Rashid, HM, Al-Hashimi, OA, Shubbar, AAF and Saleh, B (2022) Neural network for modeling the capture of lead and cadmium ions from wastewater using date palm stones. International Journal of Environmental Science and Technology. ISSN 1735-1472

Faustino, P, Brás, A and Ripper, T (2013) Corrosion inhibitors' effect on design service life of RC structures. Construction and Building Materials, 53. pp. 360-369. ISSN 0950-0618

Garau, M, Carta, G, Nieves, MJ, Jones, IS, Movchan, NV and Movchan, AB (2018) Interfacial waveforms in chiral lattices with gyroscopic spinners. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 474 (2215). ISSN 1364-5021

Georgantzia, E, Gkantou, M and Kamaris, GS (2022) Aluminium alloy channel columns: Testing, numerical modelling and design. Thin-Walled Structures, 182 (A). ISSN 0263-8231

Guo, J, Liu, S, Zhou, Y, Wang, J, Xing, X, Ren, X and Yang, Q (2016) Stability of eutectic carbide in Fe-Cr-Mo-W-V-C alloy. Materials Letters, 171. pp. 216-219. ISSN 0167-577X

Hashim, KS, Shaw, A, Al Khaddar, RM, Ortoneda Pedrola, M and Phipps, D (2017) Defluoridation of drinking water using a new flow column-electrocoagulation reactor (FCER) - Experimental, statistical, and economic approach. Journal of Environental Management, 197. pp. 80-88. ISSN 0301-4797

Hashim, KS, Shaw, A, Al Khaddar, RM, Pedrola, MO and Phipps, D (2017) Energy efficient electrocoagulation using a new flow column reactor to remove nitrate from drinking water - Experimental, statistical, and economic approach. Journal of Environmental Management, 196. pp. 224-233. ISSN 0301-4797

Hashim, KS, Shaw, A, Al Khaddar, RM, Pedrola, MO and Phipps, D (2016) Iron removal, energy consumption and operating cost of electrocoagulation of drinking water using a new flow column reactor. Journal of Environmental Management, 189. pp. 98-108. ISSN 0301-4797

Hassan, S, Wang, J, Kontovas, CA and Bashir, M (2021) Modified FMEA hazard identification for cross-country petroleum pipeline using Fuzzy Rule Base and approximate reasoning. Journal of Loss Prevention in the Process Industries. ISSN 0950-4230

Hernandez-Nava, E, Smith, CJ, Derguti, F, Tammas-Williams, S, Leonard, F, Withers, PJ, Todd, I and Goodall, R (2016) The effect of defects on the mechanical response of Ti-6Al-4V cubic lattice structures fabricated by electron beam melting. Acta Materialia, 108. pp. 279-292. ISSN 1359-6454

Idowu, IA, Hashim, KS, Shaw, A and Nunes, LJR (2021) Enhancing the fuel properties of beverage wastes as non-edible feedstock for biofuel production. Biofuels. ISSN 1759-7269

Jabbar, DN, Al-Rifaie, A, Hussein, AM, Shubbar, AAF, Nasr, MS and Al-Khafaji, ZS (2021) Shear behaviour of reinforced concrete beams with small web openings. Materials Today: Proceedings. ISSN 2214-7853

Jalal Kashesh, G, Joni, HH, Dulaimi, A and Jalal Kaishesh, A (2023) Laboratory investigation on the performance of asphalt bitumen using recycled tyre rubber produced in Iraq. Materials Today: Proceedings. ISSN 2214-7853

Jamal, M and Morgan, MN (2017) Design Process Control for Improved Surface Finish of Metal Additive Manufactured Parts of Complex Build Geometry. Inventions, 2 (4). ISSN 2411-5134

Jamaludin, L, Razak, RA, Abdullah, MMAB, Vizureanu, P, Brás, A, Imjai, T, Sandu, AV, Abd Rahim, SZ and Yong, HC (2022) The Suitability of Photocatalyst Precursor Materials in Geopolymer Coating Applications: A Review. Coatings, 12 (9). p. 1348. ISSN 2079-6412

Karaghool, HAK, Hashim, KS, Kot, P and Muradov, M (2022) Preliminary Studies of Methylene Blue Remotion from Aqueous Solutions by Ocimum basilicum. Environments, 9 (2). ISSN 2076-3298

Kraidi, L, Shah, RK, Matipa, WM and Borthwick, F (2021) An Investigation of mitigating the Safety and Security Risks allied with Oil and Gas Pipeline Project: a case study in Iraq. Journal of Pipeline Science and Engineering, 1 (3). pp. 349-359. ISSN 2667-1433

Kundrák, J, Mitsyk, AV, Fedorovich, VA, Morgan, MN and Markopoulos, AP (2019) The Use of the Kinetic Theory of Gases to Simulate the Physical Situations on the Surface of Autonomously Moving Parts During Multi-Energy Vibration Processing. Materials, 12 (19). ISSN 1996-1944

Lace, R, Duffy, GL, Gallagher, AG, Doherty, KG, Maklad, O, Wellings, DA and Williams, RL (2021) Characterization of Tunable Poly-ε-Lysine-Based Hydrogels for Corneal Tissue Engineering. Macromolecular Bioscience. ISSN 1616-5187

Lam, S, Wang, F, Yeap, SP, Teng, KH, Shaw, A, Karunamoothei, V, Khosravi, V and Liu, C (2024) On the Rapid Synthesis of Reduced Graphene Oxide via Ultrasound-Promoted Eco-Friendly Reduction Approach and Its Effects on Physicochemical Properties. ChemSusChem. ISSN 1864-5631

Latif Al-Mufti, RA and Fried, A (2017) Improving the strength properties of recycled asphalt aggregate concrete. Construction and Building Materials, 149. pp. 45-52. ISSN 0950-0618

Li, Q, Yuan, S, Gao, X, Zhang, Z, Chen, B, Li, Z and Batako, ADL (2022) Surface and subsurface formation mechanism of SiCp/Al composites under ultrasonic scratching. Ceramics International, 49 (1). pp. 817-833. ISSN 0272-8842

Liu, S, Zhou, Y, Xing, X, Wang, J, Ren, X and Yang, Q (2016) Growth characteristics of primary M7C3 carbide in hypereutectic Fe-Cr-C alloy. SCIENTIFIC REPORTS, 6. ISSN 2045-2322

Liu, X, Carre, MJ, Zhang, Q, Lu, Z, Matcher, SJ and Lewis, R (2017) Measuring Contact Area in a Sliding Human Finger-Pad Contact. Skin Research and Technology, 24 (1). pp. 31-44. ISSN 1600-0846

Loughney, S, Wang, J, Matellini, DB and Nguyen, TT (2021) Utilizing the Evidential Reasoning approach to determine a suitable wireless sensor network orientation for asset integrity monitoring of an offshore gas turbine driven generator. Expert Systems with Applications. ISSN 0957-4174

Malik, S, Ruddock, F, Dowling, A, Byrne, K, Schmitt, W, Khalakhan, I, Nemoto, Y, Guo, H, Shrestha, LK, Ariga, K and Hill, J (2018) Graphene composites with dental and biomedical applicability. Beilstein Journal of Nanotechnology, 9. pp. 801-808. ISSN 2190-4286

Malkeson, SP, Ahmed, U, Turquand d'Auzay, C, Pillai, AL, Chakraborty, N and Kurose, R (2020) Displacement speed statistics in an open turbulent jet spray flame. Fuel, 286 (1). ISSN 0016-2361

McCloskey, AP, Lee, M, Megaw, J, McEvoy, J, Coulter, SM, Pentlavalli, S and Laverty, G (2019) Investigating the In Vivo Antimicrobial Activity of a Self-Assembling Peptide Hydrogel Using a Galleria mellonella Infection Model. ACS Omega, 4 (2). pp. 2584-2589. ISSN 2470-1343

McKenzie, LMCS, Lee, D and Amoako-Attah, J (2023) Analysis of Hydrogen Production Methods Using the Analytic Hierarchy Process. Engineering Future Sustainability, 1 (1). ISSN 2753-4693

Megdiche, I, Atherton, W, Allanson, D and Harris, C (2022) Effect of mitigation on the catastrophic failure of storage tanks. Journal of Loss Prevention in the Process Industries, 80. pp. 1-14. ISSN 0950-4230

Mohamad Zaimi, NS, Mohd Salleh, MAA, Abdullah, MMAB, Ahmad, R, Mostapha, M, Yoriya, S, Chaiprapa, J, Zhang, G and Harvey, DM (2020) Effect of kaolin geopolymer ceramic addition on the properties of Sn-3.0Ag-0.5Cu solder joint. Materials Today Communications, 25. ISSN 2352-4928

Mohammed, H, Ortoneda-Pedrola, M, Nakouti, I and Brás, A (2020) Experimental characterisation of non-encapsulated bio-based concrete with self-healing capacity. Construction and Building Materials, 256. ISSN 0950-0618

Naghipour, D, Taghavi, K, Jaafari, J, Hashim, KS, Javan Mahjoub Doust, F and Mahjoub Doust, MJ (2022) Evaluation of the efficacy of Fe2O3 magnetised kaolin: Simultaneous removal of ceftriaxone and cefixime from aqueous media. International Journal of Environmental Analytical Chemistry. pp. 1-18. ISSN 0306-7319

Nasr, MS, Shubbar, A, Hashim, TM and Abadel, AA (2023) Properties of a Low-Carbon Binder-Based Mortar Made with Waste LCD Glass and Waste Rope (Nylon) Fibers. Processes, 11 (5).

Naylor, A, Hackney, P, Perera, N and Clahr, E (2012) A predictive model for the cutting force in wood machining developed using mechanical properties. BioResources, 7 (3). pp. 2883-2894. ISSN 1930-2126

Nie, LX, Zha, YF, Yu, JD, Kang, S, Dai, Z, Ma, SC and Chan, K (2022) Quality Grade Evaluation of Niuhuang Qingwei Pills Based on UPLC and TCM Reference Drug—A Novel Principle of Analysis of Multiple Components in Ready-Made Chinese Herbal Medicine. Processes, 10 (6).

Okoh, OA, Critchley, ME, Bisby, RH, Lawrence, CL, Wainwright, M and Smith, RB (2019) Synthesis and photophysical properties of meso-aminophenyl-substituted heptamethine dyes as potential leads to new contrast agents. Coloration Technology, 135 (4). pp. 305-311. ISSN 1472-3581

Prasatkhetragarn, A, Jutimoosik, J, Jantaratan, P, Kidkhunthod, P, Yimnirun, R, Ren, J and Ren, X (2019) Identification of Barium-Site Substitution of BiFeO3-Bi0.5K0.5TiO3 Multiferroic Ceramics: X-ray Absorption Near Edge Spectroscopy. Radiation Physics and Chemistry, 170. ISSN 0969-806X

Ren, S, Liu, X, Erkens, S, Lin, P and Gao, Y (2022) Multi-component analysis, molecular model construction, and thermodynamics performance prediction on various rejuvenators of aged bitumen. Journal of Molecular Liquids, 360. ISSN 0167-7322

Ren, S, Liu, X, Lin, P, Erkens, S and Gao, Y (2022) Chemical characterizations and molecular dynamics simulations on different rejuvenators for aged bitumen recycling. Fuel, 324. ISSN 0016-2361

Ren, S, Liu, X, Lin, P, Gao, Y and Erkens, S (2022) Molecular dynamics simulation on bulk bitumen systems and its potential connections to macroscale performance: Review and discussion. Fuel, 328. ISSN 0016-2361

Ren, XJ, Liu, S, Zhang, J, Wang, Z, Shi, Z, Zhou, Y and Yang, Q (2017) Refinement and homogenization of M7C3 carbide in hypereutectic Fe-Cr-C coating by Y2O3 and TiC. Materials Characterization, 132. pp. 41-45. ISSN 1044-5803

Romanov, D, Korostynska, O, Lekang, OI and Mason, A (2022) Towards human-robot collaboration in meat processing: Challenges and possibilities. Journal of Food Engineering, 331. ISSN 0260-8774

Seton, L, Ehtezazi, T, DAVIES, MJ, Seton, L, MORGAN, NM, ROSS, S, MARTIN, GD and HUTCHINGS, IM (2015) Optimizing the primary particle size distributions of pressurized metered dose inhalers by using inkjet spray drying for targeting desired regions of the lungs. Drug Development and Industrial Pharmacy, 41 (2). pp. 279-291. ISSN 0363-9045

Shahedan, NF, Abdullah, MMAB, Mahmed, N, Kusbiantoro, A, Tammas-Williams, S, Li, L-Y, Aziz, IH, Vizureanu, P, Wysłocki, JJ, Błoch, K and Nabiałek, M (2021) Properties of a New Insulation Material Glass Bubble in Geo-Polymer Concrete. Materials, 14 (4). ISSN 1996-1944

Shi, Z, Shao, W, Xing, X, Ren, X, Zhou, Y and Yang, Q (2021) First-principles investigation of V-doping effects on Fe3Cr4C3 carbide in hypereutectic Fe–Cr–C hardfacing coating. Acta Crystallographica Section B Structural Science, Crystal Engineering and Materials, 77 (4). ISSN 2052-5192

Shubbar, AAF, Jafer, H, Abdulredha, M, Al-Khafaji, ZS, Nasr, MS, Al Masoodi, Z and Sadique, MM (2020) Properties of cement mortar incorporated high volume fraction of GGBFS and CKD from 1 day to 550 days. Journal of Building Engineering, 30. ISSN 2352-7102

Shubbar, AAF, Jafer, HM, Dulaimi, AFD, Atherton, W and Al-Rifaie, A (2017) The Development of a Low Carbon Cementitious Material Produced from Cement, Ground Granulated Blast Furnace Slag and High Calcium Fly Ash. International Journal of Civil, Environmental, Structural, Construction and Architectural Engineering, 11 (7). pp. 905-908. ISSN 1307-6892

Tammas-Williams, S and Todd, I (2016) Design for additive manufacturing with site-specific properties in metals and alloys. Scripta Materialia, 135. pp. 105-110. ISSN 1359-6462

Tammas-Williams, S, Withers, PJ, Todd, I and Prangnell, PB (2017) The Influence of Porosity on Fatigue Crack Initiation in Additively Manufactured Titanium Components. Scientific Reports, 7. ISSN 2045-2322

Tammas-Williams, S, Withers, RI, Todd, I and Prangnell, PB (2016) Porosity regrowth during heat treatment of hot isostatically pressed additively manufactured titanium components. Scripta Materialia, 122. pp. 72-76. ISSN 1359-6462

Teng, KH, Kazi, SN, Amiri, A, Habali, AF, Bakar, MA, Chew, BT, Al-Shamma'a, A, Shaw, A, Solangi, KH and Khan, G (2017) Calcium carbonate fouling on double-pipe heat exchanger with different heat exchanging surfaces. Powder Technology, 315. pp. 216-226. ISSN 0032-5910

Thisani, S, Vandi Von Kallon, D and Byrne, PA (2021) Review of Remediation Solutions for Acid Mine Drainage Using the Modified Hill Framework. Sustainability, 13 (15). ISSN 2071-1050

Thisani, SK, Kallon, DVV and Byrne, PA (2020) Geochemical classification of global mine water drainage. Sustainability, 12 (24). ISSN 2071-1050

Tian, Z, Chen, X and Xu, X (2020) Molecular Dynamics Simulation of the Material Removal in the Scratching of 4H-SiC and 6H-SiC Substrates. International Journal of Extreme Manufacturing, 2. ISSN 2631-7990

Torres de Sande, V, Sadique, MM, Pineda, P, Brás, A, Atherton, W and Riley, ML (2021) Potential use of sugar cane bagasse ash as sand replacement for durable concrete. Journal of Building Engineering. ISSN 2352-7102

Trong, DK, Pham, BT, Jalal, FE, Iqbal, M, Roussis, PC, Mamou, A, Ferentinou, M, Vu, DQ, Duc Dam, N, Tran, QA and Asteris, PG (2021) On Random Subspace Optimization-Based Hybrid Computing Models Predicting the California Bearing Ratio of Soils. Materials, 14 (21). ISSN 1996-1944

Vereschaka, A, Batako, ADL, Vereschaka, A and Dodonov, A (2017) Development of modifying compounds for multilayer nano-structured coatings for cutting tools. International Journal of Nanotechnology, 14. pp. 574-583. ISSN 1475-7435

Vereschaka, A, Migranov, M, Oganyan, G, Sotova, CS and Batako, ADL (2017) Application of carbide cutting tools with nano-structured multilayer composite coatings for turning austenitic steels, type 16Cr-10NI. Mechanics and Industry, 18 (7). ISSN 2257-7777

Whitehead, KA, Liauw, CM, Lynch, S, El Mohtadi, M, Amin, M, Preuss, A, Deisenroth, T and Verran, J (2021) Diverse surface properties reveal that substratum roughness affects fungal spore binding. iScience, 24 (4). ISSN 2589-0042

Xiao, J, Jiang, W, Yuan, D, Sha, A and Huang, Y (2017) Effect of styrene–butadiene rubber latex on the properties of modified porous cement-stabilised aggregate. Road Materials and Pavement Design. pp. 1-14. ISSN 1468-0629

Xing, XL, Yuan, XM, Zhou, YF, Qi, XW, Lu, X, Xing, TH, Ren, XJ and Yang, QX (2017) Effect of bainite layer by LSMCIT on wear resistance of medium-carbon bainite steel at different temperatures. Surface and Coatings Technology, 325. pp. 462-472. ISSN 0257-8972

Zhang, G, Lee, C, Harvey, D and Ma, H (2015) Development of C-Line plot technique for characterization of edge effects in acoustic imaging: A case study using flip chip package geometry. Microelectronics Reliability. ISSN 1872-941X

Zhao, C, Xing, X, Guo, J, Shi, Z, Zhou, Y, Ren, X and Yang, Q (2019) Micro-properties of (Nb,M)C carbide (M = V, Mo, W and Cr) and precipitation behavior of (Nb,V)C in carbide reinforced coating. Journal of Alloys and Compounds, 788. pp. 852-860. ISSN 0925-8388

Zhao, C, Xing, X, Guo, J, Shi, Z, Zhou, Y, Ren, XJ and Yang, Q (2019) Microstructure and wear resistance of (Nb,Ti)C carbide reinforced Fe matrix coating with different Ti contents and interfacial properties of (Nb,Ti)C/α-Fe. Applied Surface Science, 494. pp. 600-609. ISSN 0169-4332

Zhao, C, Zhou, Y, Xing, X, Liu, S, Ren, X and Yang, Q (2018) Precipitation stability and micro-property of (Nb, Ti)C carbides in MMC coating. Journal of Alloys and Compounds, 763. pp. 670-678. ISSN 0925-8388

Zhou, Y, Li, L, Chen, Z, Rao, L, Ren, X, Xing, X and Yang, Q (2020) Accidental damaged diamond-like carbon coating by prefabricated scratches: Experimental exploration on anticorrosion and tribological performances. Diamond and Related Materials, 111. ISSN 0925-9635

Conference or Workshop Item

Blakey, RT, Mason, A, Rolph, CE, Bond, G and Al-Shamma'a, A (2011) Lipid droplet detection by the cavity perturbation method. In: Journal of Physics Conference Series , 307 (1). pp. 1-5. (16th Conference in the Biennial Sensors and their Applications, 12th - 14th September 2011, Univ Coll Cork, Tyndall Natl Inst, Cork, IRELAND).

Hashim, KS, Shaw, A, Al Khaddar, RM, Ortoneda Pedrola, M and Phipps, D (2017) Influence of electrodes spacing on internal temperature of electrocoagulation (EC) cells during the removal (Fe II) from drinking water. In: The 3rd BUiD Doctoral Research Conference BDRC2017 Conference Proceedings (3). p. 124. (The 3rd BUiD Annual Doctoral Research Conference 2017, 13 May 2017 - 13 May 2017, Dubai, UAE).

Jafer, HM, Atherton, W and Al-Dulaimi, A (2017) The Characterisation of the Strength Development of A Cement-Stabilised Soft Soil Treated with Two Different Types of Fly Ashes. In: Proceedings 16th Annual International Conference on Asphalt, Pavement Engineering and Infrastructure , 16 (22-23). (16th Annual International Conference on Asphalt, Pavement Engineering and Infrastructure, 22 February 2017 - 23 February 2017, Britannia Adelphi Hotel, Liverpool, UK).

Kraidi, L, Shah, RK, Matipa, WM and Borthwick, F (2018) Application of Fuzzy Based Model to Manage the Critical Risk Factors in Oil and Gas Pipeline Projects. In: CIDM 2018 – 5th International Conference on Interactive Digital Media . (ICIDM 2018 – 5th International Conference on Interactive Digital Media, 11 December 2018 - 12 December 2018, Liverpool, UK).

Kraidi, L, Shah, RK, Matipa, WM and Borthwick, F Investigation of the Risk Factors Causing Safety and Delay Issues in Oil and Gas Pipeline Construction Projects. In: Procedia Manufacturing . (15th Global Congress on Manufacturing and Management (GCMM-2020), 7th - 9th June 2021, Liverpool, UK).

Lane, KE (2015) Product shelf life evaluation of an enriched yogurt drink containing an omega-3 nanoemulsion with enhanced bioavailability. In: Proceedings of the Nutrition Society , 74. E222-E222. (Nutrition Society Irish Section Meeting 2015, 17th - 19th June 2015, Cork).

Oon, CS, Al-Shamma'a, A, Wylie, S, Ateeq, M, Kazi, SN and Badarudin, A Electromagnetic wave sensor for multiphase flow measurement in the oil and gas industry. In: Built Environment & Natural Environment Conference (BEAN), 18th June 2014, Liverpool John Moores University, Liverpool, UK.

Shah, RK, Kraidi, L, Matipa, WM and Borthwick, F (2022) A Model for Delay Analysis Impact at Planning Phase of Oil & Gas Pipeline Projects: A case of Iraq. In: EPiC Series in Built Environment: ASC 2022, 58th Annual Associated Schools of Construction International Conference: , 3. pp. 299-307. (ASC2022: 58th Annual Associated Schools of Construction International Conference, 20th-23rd April 2022, Atlanta, GA, United States).

Soprani, M, Korostynska, O, Mason, A, Amirthalingam, A, Cullen, J, Muradov, M, Al-Shamma'a, A, Sberveglieri, V, Carmona, EN and Sberveglieri, G (2017) Low-Frequency Capacitive Sensing for Environmental Monitoring of Water Pollution with Residual Antibiotics. In: 2016 9TH INTERNATIONAL CONFERENCE ON DEVELOPMENTS IN ESYSTEMS ENGINEERING (DESE 2016) . (9th International Conference on Developments in eSystems Engineering (DeSE), 31 August 2016 - 02 September 2016, Liverpool, ENGLAND).

Thesis

Abdelhadi, A (2020) Modelling and Control of Chemical Processes using Local Linear Model Networks. Doctoral thesis, Liverpool John Moores University.

Ishola, A (2018) Advanced Safety Methodology for Risk Management of Petroleum Refinery Operations. Doctoral thesis, Liverpool John Moores University.

Jafer, HM (2017) Soft Soil Stabilisation Using a Novel Blended Cementitious Binder Produced From Waste Fly Ashes. Doctoral thesis, Liverpool John Moores University.

Kadhim, A (2021) Synthesis of One-Part Alkali-Activated Cement and Albite-Diopside Glass-Ceramic from Calcium-Alumina-Silicate Precursors. Doctoral thesis, Liverpool John Moores University.

Labib, W A (2008) An experimental study and finite analysis of punching shear failure in steel fibre-reinforced concrete ground -suspended floor slabs. Doctoral thesis, Liverpool John Moores University.

Li, C (2016) Risk Modelling and Simulation of Chemical Supply Chains using a System Dynamics Approach. Doctoral thesis, Liverpool John Moores University.

Muradov, M (2017) Prediction of Water Activity in Cured Meat using Microwave Spectroscopy. Doctoral thesis, Liverpool John Moores University.

Nwaoha, T C (2011) Advanced risk and maintenance modelling in LNG carrier operations. Doctoral thesis, Liverpool John Moores University.

Omer, G (2021) Non-destructive electromagnetic sensing technique to determine the level of chloride ions in reinforced concrete structures. Doctoral thesis, Liverpool John Moores University.

Rogan, K R (1988) The characterisation and surface electrochemistry of a corrosion product (#alpha#FeOOH). Doctoral thesis, Liverpool John Moores University.

Romano, A (2020) OPTIMISING MOISTURE TRANSPORT IN BIO-BASED, EARTH AND NATURAL HYDRAULIC LIME MORTARS USING HYGROTHERMAL AND CHEMICAL CHARACTERISTICS. Doctoral thesis, Liverpool John Moores University.

Stavrinides, A J (2012) Isothermal microwave biology : catalysis and fermentation. Doctoral thesis, Liverpool John Moores University.

Usman, AY (2017) A Resilience Modelling Approach for Oil Terminal Operations Under High Uncertainties. Doctoral thesis, Liverpool John Moores University.

Vaughan, K A (1999) An investigation of cement coating for aggregates in bituminous material. Doctoral thesis, Liverpool John Moores University.

Wendling, L (2009) Non-invasive alcohol and glucose detection using microwave resonators. Doctoral thesis, Liverpool John Moores University.

Wong, Y M (2008) Optimising the plastic optical fibre evanescent field biofilm sensor. Doctoral thesis, Liverpool John Moores University.

Zavoianu, A-G (2020) A BIOASSAY-GUIDED INVESTIGATION INTO THE CANCER CHEMOPREVENTIVE POTENTIAL OF SELECTED NON-DIETARY PLANTS AND SELECTED FLAVONOIDS. Doctoral thesis, Liverpool John Moores University.