Article

Abeer, SZ, Abdulridha, SQ, Salah Nasr, M, Ali Hasan, Z and Shubbar, A (2024) Improving the mechanical behavior of pervious concrete using polypropylene and waste rope fibers. Al-Qadisiyah Journal for Engineering Sciences, 17 (1). pp. 38-46. ISSN 1998-4456

Al Hawesah, H, Sadique, MM, Harris, C, Al Nageim, H, Stopp, K, Pearl, H and Shubbar, A (2021) A Review on Improving Asphalt Pavement Service Life Using Gilsonite-Modified Bitumen. Sustainability, 13 (12). ISSN 2071-1050

Al Hawesah, H, Sadique, MM, Harris, C, Al Nageim, H, Stopp, K, Pearl, H and Shubbar, AAF (2021) Improving the Temperature Sensitivity of Bitumen for Emergency Pavement Repair. Periodica Polytechnica Civil Engineering. ISSN 0553-6626

Al-Busaltan, S, Nemaa, ZK, Kadhim, MA and Al-Jawad, O (2022) Estimating parking generation rate for Karbala holy city using multi-variables approach. Periodicals of Engineering and Natural Sciences, 9 (2). pp. 415-429.

Al-Kafaji, M, Al-Busaltan, S, Kadhim, MA, Dulaimi, A, Saghafi, B and Al Hawesah, H (2023) Investigating the Impact of Polymer and Portland Cement on the Crack Resistance of Half-Warm Bituminous Emulsion Mixtures. Sustainability, 15 (21).

Amoori Kadhim, M, Al-Busaltan, S, Dulaimi, AF, Sadique, M, Al Nageim, H, Al-Kafaji, M and Al-Yasari, R (2022) Developing a sustainable, post treated, half warm mix asphalt for structural surface layer. Construction and Building Materials, 342 (PartA). p. 127926. ISSN 0950-0618

Ateeq, M and Al-Shamma'a, A (2016) Experimental study on the optimisation of chemical treatment to reduce waste rubber aggregates absorption properties. Construction and Building Materials, 126. ISSN 0950-0618

Chen, J, Dan, H, Ding, Y, Gao, Y, Guo, M, Guo, S, Han, B, Hong, B, Hou, Y, Hu, C, Hu, J, Huyan, J, Jiang, J, Jiang, W, Li, C, Liu, P, Liu, Y, Liu, Z, Lu, G, Ouyang, J et al, Qu, X, Ren, D, Wang, C, Wang, C, Wang, D, Wang, D, Wang, H, Wang, H, Xiao, Y, Xing, C, Xu, H, Yan, Y, Yang, X, You, L, You, Z, Yu, B, Yu, H, Yu, H, Zhang, H, Zhang, J, Zhou, C, Zhou, C and Zhu, X (2021) New innovations in pavement materials and engineering: A review on pavement engineering research 2021. Journal of Traffic and Transportation Engineering (English Edition), 8 (6). pp. 815-999. ISSN 2095-7564

Diciunaite-Rauktiene, R, Gurskiene, V, Burinskiene, M and Maliene, V (2018) The Usage and Perception of Pedestrian Zones in Lithuanian Cities: Multiple Criteria and Comparative Analysis. Sustainability, 10 (3). ISSN 2071-1050

Dulaimi, A, Al Nageim, H, Ruddock, F and Seton, L (2016) New developments with cold asphalt concrete binder course mixtures containing binary blended cementitious filler (BBCF). Construction and Building Materials, 124. pp. 414-423. ISSN 0950-0618

Dulaimi, AF, Al-Busaltan, S and Sadique, MM (2021) The development of a novel, microwave assisted, half-warm mixed asphalt. Construction and Building Materials, 301. ISSN 0950-0618

Fu, Z, Dang, Y, Guo, B and Huang, Y (2016) Laboratory investigation on the properties of asphalt mixtures modified with double-adding admixtures and sensitivity analysis. Journal of Traffic and Transportation Engineering (English Edition), 3 (5). ISSN 2095-7564

Fu, Z, Shen, W, Huang, Y, Hang, G and Li, X (2017) Laboratory evaluation of pavement performance using modified asphalt mixture with a new composite reinforcing material. Journal of Traffic and Transportation Engineering (English Edition), 10 (6). pp. 507-516. ISSN 2095-7564

Galatioto, F, Huang, Y, Parry, T, Bird, R and Bell, M (2015) Traffic modelling in system boundary expansion of road pavement life cycle assessment. TRANSPORTATION RESEARCH PART D-TRANSPORT AND ENVIRONMENT, 36. pp. 65-75. ISSN 1361-9209

Hawesah, HA, Sadique, MM, Harris, C, Al Nageim, H, Stopp, K and Pearl, H (2021) Polymer modified asphalt binder – an approach for enhancing temperature sensitivity for emergency pavement repair. International Journal of Pavement Engineering. ISSN 1029-8436

Huang, Y, Jiang, W, Yuan, D, Xu, S, Hu, H, Xiao, J and Sha, A (2017) Energy harvesting from asphalt pavement using thermoelectric technology. Applied Energy, 205. pp. 941-950. ISSN 0306-2619

Jafer, HM, Atherton, W, Sadique, MM, Ruddock, FM and Loffill, E (2017) Development of a New Ternary Blended Cementitious Binder Produced from Waste Materials for use in Soft Soil Stabilisation. Journal of Cleaner Production. ISSN 0959-6526

Jiang, W, Sha, A, Xiao, J, Li, Y and Huang, Y (2015) Experimental study on filtration effect and mechanism of pavement runoff in permeable asphalt pavement. Construction and Building Materials, 100. pp. 102-110. ISSN 0950-0618

Jwaida, Z, Dulaimi, A, Mydin, MAO, Özkılıç, YO, Jaya, RP and Ameen, A (2023) The Use of Waste Polymers in Asphalt Mixtures: Bibliometric Analysis and Systematic Review. Journal of Composites Science, 7 (10).

Latif Al-Mufti, RA and Fried, A (2017) Improving the strength properties of recycled asphalt aggregate concrete. Construction and Building Materials, 149. pp. 45-52. ISSN 0950-0618

Lu, J, Zhang, M, Feng, J, Gao, Y, Yang, Y, Li, Y and Li, L (2023) Investigation on the technical performance and workability of hot-melting road marking materials using for the high-altitude area. Case Studies in Construction Materials, 18. ISSN 2214-5095

Ma, F, Sha, A, Lin, R, Huang, Y and Wang, C (2016) Greenhouse Gas Emissions from Asphalt Pavement Construction: A Case Study in China. International Journal of Environmental Research and Public Health, 13 (3). ISSN 1660-4601

Ma, F, Sha, A, Yang, P and Huang, Y (2016) The Greenhouse Gas Emission from Portland Cement Concrete Pavement Construction in China. International Journal for Environmental Research and Public Health, 13 (7). ISSN 1660-4601

Maliene, V and Diciunaite-Rauktiene, R (2016) FACTORS INFLUENCING CITIES PEDESTRIAN STREET FUNCTIONALITY AND SUSTAINABLE LAND USE. Proceedings of the 7th International Scientific Conference Rural Development 2015. ISSN 1822-3230

Obaid, HA, Hashim, TM, Al-Abody, AAM, Nasr, MS, Abbas, GH, Kadhim, AM and Sadique, M (2022) Properties of Modified Warm-Mix Asphalt Mixtures Containing Different Percentages of Reclaimed Asphalt Pavement. Energies, 15 (20). ISSN 1996-1073

Ojuri, OO, Osagie, PO, Oluyemi-Ayibiowu, BD, Fadugba, OG, Tanimola, MO, Chauhan, VB and Jayejeje, OO (2022) Eco-friendly stabilization of highway lateritic soil with cow bone powder admixed lime and plastic granules reinforcement. Cleaner Waste Systems, 2. ISSN 2772-9125

Sadique, MM, Al-Nageim, H and Stopps, K (2015) To investigate the fundamental causes of utility air voids content failures in asphalt layers to achieve Specification for the Reinstatement of Openings in Highways (SROH) compliant performance. Construction and Building Materials, 93. pp. 595-607. ISSN 0950-0618

Sadique, MM, Al-Nageim, H and Stopps, K (2017) The reliability of asset management regime of the SROH using air void content of asphalt mixtures. International Journal of Pavement Engineering. ISSN 1029-8436

Sadique, MM and Coakley, E (2016) The influence of physico-chemical properties of fly ash and CKD on strength generation of high-volume fly ash concrete. Advances in Cement Research, 28 (9). pp. 595-605. ISSN 0951-7197

Shah, RK (2015) Earthwork planning and visualisation of time-location information in road construction projects. Journal of Advanced College of Engineering and Management, 1 (1). pp. 1-9. ISSN 2392-4853

Shah, RK and Alqarni, M (2018) An Investigation of Health and Safety issues at Highway Construction sites in developing countries. Journal of Advanced College of Engineering and Management, 4. pp. 83-93. ISSN 2392-4853

Shah, RK, McMann, O and Borthwick, F (2017) Challenges and prospects of applying asset management principles to Highway maintenance: A case study of the UK. Transportation Research Part A: Policy and Practice, 97. pp. 231-243. ISSN 0965-8564

Shanbara, HK, Dulaimi, AF, Al-Mansoori, T, Al-Busaltan, S, Herez, M, Sadique, M and Abdel-Wahed, T (2021) The future of eco-friendly cold mix asphalt. Renewable and Sustainable Energy Reviews, 149. ISSN 1364-0321

Shubbar, A, Nasr, MS, Kadhim, A, Hashim, TM and Sadique, M (2023) Performance Comparison of 45° and 90° Herringboned Permeable Interlocking Concrete Pavement. Infrastructures, 8 (5).

Wang, T, Qu, Z, Yang, Z, Nichol, T, Dimitriu, D, Clarke, G and Bowden, D (2019) How can the UK road system be adapted to the impacts posed by climate change? By creating a climate adaptation framework. Transportation Research Part D: Transport and Environment. ISSN 1361-9209

Xiao, J, Jiang, W, Yuan, D, Sha, A and Huang, Y (2017) Effect of styrene–butadiene rubber latex on the properties of modified porous cement-stabilised aggregate. Road Materials and Pavement Design. pp. 1-14. ISSN 1468-0629

Zhou, C and Tian, Z (2016) Right-turn Traffic Volume Adjustment in Traffic Signal Warrant Analysis. Transportation Research Record: Journal of the Transportation Research Board, 2562. pp. 28-35. ISSN 0361-1981

Monograph

Sadique, MM, Al Nageim, H and Stopps, K (2017) Investigating the reliability of air void testing regime of Specification of the Reinstatement of Openings in Highways (SROH) for assessing the performance of a hand laid recipe mixed bituminous material in utility reinstatement. Project Report. LJMU, Liverpool.

Conference or Workshop Item

Abbas, A, Dulaimi, AF, Shanbara, HK and Ruddock, F (2017) Impact of New Method for Laying Separate Sewer System on Pavement Layers. In: The 3rd BUiD Doctoral Research Conference . pp. 223-232. (The 3rd BUiD Doctoral Research Conference, 13 May 2017 - 14 May 2017, Dubai, UAE).

Jafer, HM, Atherton, W and Al-Dulaimi, A (2017) The Characterisation of the Strength Development of A Cement-Stabilised Soft Soil Treated with Two Different Types of Fly Ashes. In: Proceedings 16th Annual International Conference on Asphalt, Pavement Engineering and Infrastructure , 16 (22-23). (16th Annual International Conference on Asphalt, Pavement Engineering and Infrastructure, 22 February 2017 - 23 February 2017, Britannia Adelphi Hotel, Liverpool, UK).

Jafer, HM, Atherton, W, Ruddock, F and Loffill, E The Stabilization of a Soft Soil Subgrade Layer Using a New Sustainable Binder Produced from Free-Cement Blending of Waste Materials Fly Ashes. In: 10th international conference on the bearing capacity of roads, railways and airfields, 28 June 2017 - 30 June 2017, Athens, Greece. (Accepted)

Koh, SS, Zhou, B, Yang, P and Yang, Z (2017) A Survey on Urban Traffic Optimisation for Sustainable and Resilient Transportation Network. In: Developments in eSystems Engineering (DeSE) . (9th International Conference on Developments in eSystems Engineering (DeSE), 31 August 2016 - 02 September 2016, Liverpool, UK).

Shah, RK and Dawood, N (2007) An Innovative Approach for Improvement of Communications through Visual Schedule Model in Road Construction. In: 7th International Conference on Construction Application of Virtual Reality . pp. 216-223. (CONVR 2007: 7th International Conference on Construction Application of Virtual Reality, 22nd - 23rd Oct 2007, PA, USA).

Umar, T, Tahir, A, Umeokafor, N, Nawarathna, A, Zia, A and Vali, MSH (2022) An Experimental Investigation on Strength Characteristics of Concrete Using Wastepaper Sludge Ash (WPSA). In: CITC-12 Proceedings . (CITC-12 -12th International Conference on Construction in the 21st Century, May 16th - 19th 2022, Jordan).

Thesis

Al Hakim, B (1997) An improved backcalculation method to predict flexible pavement layers moduli and bonding condition between wearing course and base course. Doctoral thesis, Liverpool John Moores University.

Al Hawesah, H (2022) Development of Polymer Modified Pelletised Bitumin for Utility Reinstatements and Emergency Pothole Repair. Doctoral thesis, Liverpool John Moores University.

Al-Hdabi, A (2014) HIGH STRENGTH COLD ROLLED ASPHALT SURFACE COURSE MIXTURES. Doctoral thesis, Liverpool John Moores University.

Dulaimi, AFD (2017) Development of a New Cold Binder Course Emulsion Asphalt. Doctoral thesis, Liverpool John Moores University.

Jafer, HM (2017) Soft Soil Stabilisation Using a Novel Blended Cementitious Binder Produced From Waste Fly Ashes. Doctoral thesis, Liverpool John Moores University.

Kirwan, J (2021) MECHANICAL PROPERTIES AND CRACK RETARDATION OF GLASS FIBRE MICROASPHALT. Doctoral thesis, Liverpool John Moores University.

Makki, AA (2021) THE IMPACT OF CONTAINER CARRIER HEAVY GOODS VEHICLES ON ROAD TRANSPORTATION OPERATION, SAFETY, AND LOGISTICS. Doctoral thesis, Liverpool John Moores University.

Shanbara, HK (2018) DEVELOPMENT OF NEW COLD BITUMEN EMULSION MIXTURES AND FINITE ELEMENT MODELLING OF PREDICTING PERMANENT DEFORMATION. Doctoral thesis, Liverpool John Moores University.

Vaughan, K A (1999) An investigation of cement coating for aggregates in bituminous material. Doctoral thesis, Liverpool John Moores University.