Article

Abbasi, MH, Abdullah, B, Castaño-Rosa, R, Ahmad, MW, Rostami, A and Cullen, J (2022) Planning energy interventions in buildings and tackling fuel poverty: Can two birds be fed with one scone? Energy Research & Social Science, 93. ISSN 2214-6296

Abbasi, MH, Abdullah, B, Castaño-Rosa, R, Ahmad, MW, Rostami, A and Cullen, J (2022) Towards a just heat transition in the building sector: A study on social indicators of sustainability. Science Talks, 4. ISSN 2772-5693

Abdel-Wahed, T, Dulaimi, A, Shanbara, HK and Al Nageim, H (2022) The Impact of Cement Kiln Dust and Cement on Cold Mix Asphalt Characteristics at Different Climate. Sustainability (Switzerland), 14 (7). p. 4173.

Abed, AM, Mouziraji, HR, Bakhshi, J, Dulaimi, A, Mohammed, HI, Ibrahem, RK, Ben Khedher, N, Yaïci, W and Mahdi, JM (2022) Numerical analysis of the energy-storage performance of a PCM-based triplex-tube containment system equipped with arc-shaped fins. Frontiers in Chemistry, 10.

Al-Hashimi, O, Hashim, K, Loffill, E, Nakouti, I, Faisal, AAH and Cebasek, T (2022) Kinetic and Equilibrium Isotherm Studies for The Removal of Tetracycline from Aqueous Solution Using Engineered Sand Modified with Calcium Ferric Oxides. Environments, 10 (1). ISSN 2076-3298

Al-Husseinawi, FN, Atherton, W, Al-Khafaji, Z, Sadique, M and Yaseen, ZM (2022) The Impact of Molar Proportion of Sodium Hydroxide and Water Amount on the Compressive Strength of Slag/Metakaolin (Waste Materials) Geopolymer Mortar. Advances in Civil Engineering, 2022. pp. 1-14. ISSN 1687-8086

Al-sareji, OJ, Grmasha, RA, Hashim, KS, Salman, JM and Al-Juboori, RA (2022) Personal exposure and inhalation doses to PM1 and PM2.5 pollution in Iraq: An examination of four transport modes. Building and Environment. ISSN 0360-1323

Al-sareji, OJ, Meiczinger, M, Salman, JM, Al-Juboori, RA, Hashim, KS, Somogyi, V and Jakab, M (2022) Ketoprofen and aspirin removal by laccase immobilized on date stones. Chemosphere, 311 (2). ISSN 0045-6535

Alawsi, MA, Zubaidi, S, Al-Bdairi, NSS, Al-Ansari, N and Hashim, KS (2022) Drought Forecasting: A Review and Assessment of the Hybrid Techniques and Data Pre-processing. Hydrology, 9 (7). ISSN 2306-5338

Alfalah, A, Stevenson, S, Heinig, S and D'Arcy, E (2022) Housing Affordability in a Resource Rich Economy: The Case of Kuwait. International Journal of Housing Markets and Analysis. ISSN 1753-8270

Ali, AS, Chua, SJL, Riley, ML and Gan, SW (2022) The Impact of Life Cycle Cost Analysis (LCC) Towards Maintenance Performance for High-Rise Residential Lift System. Journal of Design and Built Environment, 22 (1). pp. 1-12. ISSN 1823-4208

Ali, SB, Kamaris, GS, Gkantou, M and Kansara, KD (2022) Concrete-filled and bare 6082-T6 aluminium alloy tubes under in-plane bending: Experiments, finite element analysis and design recommendations. Thin-Walled Structures, 172. ISSN 0263-8231

Ali, YA, Falah, MW, Ali, AH, Al-Mulali, MZ, Al-Khafaji, ZS, Hashim, TM, Al Sa'adi, AHM and Al-Hashimi, O (2022) Studying the effect of shear stud distribution on the behavior of steel-reactive powder concrete composite beams using ABAQUS software. Journal of the Mechanical Behavior of Materials, 31 (1). pp. 416-425. ISSN 0334-8938

Amin, M, Abdullah, BM, Wylie, SR, Rowley-Neale, SJ, Banks, CE and Whitehead, KA (2022) The Voltammetric Detection of Cadaverine Using a Diamine Oxidase and Multi-Walled Carbon Nanotube Functionalised Electrochemical Biosensor. Nanomaterials, 13 (1).

Amoori Kadhim, M, Al-Busaltan, S, Dulaimi, AF, Sadique, M, Al Nageim, H, Al-Kafaji, M and Al-Yasari, R (2022) Developing a sustainable, post treated, half warm mix asphalt for structural surface layer. Construction and Building Materials, 342 (PartA). p. 127926. ISSN 0950-0618

Arab, M, Faramarz, MG and Hashim, KS (2022) Applications of Computational and Statistical Models for Optimizing the Electrochemical Removal of Cephalexin Antibiotic from Water. Water, 14 (3). ISSN 2073-4441

Arokiasamy, P, Abdullah, MMAB, Abd Rahim, SZ, Sadique, M, Ming, LY, Mohd Salleh, MAA, Mohd Arif Zainol, MRR and Ghazali, CMR (2022) Diverse material based geopolymer towards heavy metals removal: A review. Journal of Materials Research and Technology, 22. pp. 126-156. ISSN 2238-7854

Asteris, PG, Rizal, FIM, Koopialipoor, M, Roussis, PC, Ferentinou, M, Armaghani, DJ and Gordan, B (2022) Slope Stability Classification under Seismic Conditions Using Several Tree-Based Intelligent Techniques. Applied Sciences, 12 (3). ISSN 2076-3417

Baaki, TK, Baharum, MR, Pitt, M and Davies, S (2022) Associated factors of medical waste management practices in developing countries: a review. International Journal of Environment and Waste Management. ISSN 1478-9868

Bahlekeh, A, Mohammed, HI, Al-Azzawi, WK, Dulaimi, A, Majdi, HS, Talebizadehsardari, P and Mahdi, JM (2022) CFD analysis on optimizing the annular fin parameters toward an improved storage response in a triple-tube containment system. Energy Science and Engineering. ISSN 2050-0505

Bin Ali, S, Kamaris, GS and Gkantou, M (2022) Flexural behaviour of concrete-filled double skin aluminium alloy tubes. Engineering Structures, 272. ISSN 0141-0296

Bin Ali, S, Kamaris, GS and Gkantou, M (2022) Flexural buckling behaviour of concrete-filled double skin aluminium alloy columns. Engineering Structures, 275 (Part B). ISSN 0141-0296

Bouchard, DJ, Andredaki, M, Georgoulas, A, Marengo, M and Chandra, S (2022) Penetration characteristics of a liquid droplet impacting on a narrow gap: Experimental and numerical analysis. Physics of Fluids, 34 (5). ISSN 1070-6631

Chippagiri, R, Bras, A and Ralegaonkar, RV (2022) Development of sustainable prefabricated housing system by small-scale experimental model. Proceedings of the Institution of Civil Engineers: Engineering Sustainability. pp. 1-14. ISSN 1478-4629

Chippagiri, R, Brás, A, Sharma, D and Ralegaonkar, RV (2022) Technological and Sustainable Perception on the Advancements of Prefabrication in Construction Industry. Energies, 15 (20). ISSN 1996-1073

Chippagiri, R, Gavali, HR, Ralegaonkar, RV and Armada Bras, A (2022) Performance Evaluation of a Sustainable Prefabricated System Using Small-Scale Experimental Model Technique. Buildings, 12 (11).

Deb, P, Debnath, B, Hasan, M, Alqarni, AS, Alaskar, A, Alsabhan, AH, Khan, MA, Alam, S and Hashim, KS (2022) Development of Eco-Friendly Concrete Mix Using Recycled Aggregates: Structural Performance and Pore Feature Study Using Image Analysis. Materials (Basel, Switzerland), 15 (8). ISSN 1996-1944

Dulaimi, AF, Al-Busaltan, S, Kadhim, MA, Al-Khafaji, R, Sadique, MM, Al Nageim, H, Ibrahem, RK, Awrejcewicz, J, Pawłowski, W and Mahdi, JM (2022) A Sustainable Cold Mix Asphalt Mixture Comprising Paper Sludge Ash and Cement Kiln Dust. Sustainability, 14 (16).

Durrans, D, Lee, D and Sadique, M (2022) Application of concrete encased ecobrick blocks in the UK’s construction industry. Kufa Journal of Engineering, 13 (4). pp. 70-89. ISSN 2071-5528

Ebrahimnataj Tiji, M, Mohammed, HI, Ibrahem, RK, Dulaimi, A, Mahdi, JM, Sh. Majdi, H, Keshtkar, MM and Talebizadehsardari, P (2022) Evaluation of T-Shaped Fins With a Novel Layout for Improved Melting in a Triple-Tube Heat Storage System. Frontiers in Energy Research, 10.

Emad, W, Mohammed, As, Brás, A, Asteris, Pg, Kurda, R, Muhammed, Z, Hassan, AMT, Qaidi, SMA and Sihag, P (2022) Metamodel techniques to estimate the compressive strength of UHPFRC using various mix proportions and a high range of curing temperatures. Construction and Building Materials, 349. ISSN 0950-0618

Esper, IDM, Smolkin, O, Manko, M, Popov, A, From, PJ and Mason, A (2022) Evaluation of RGB-D Multi-Camera Pose Estimation for 3D Reconstruction. Applied Sciences, 12 (9). ISSN 2076-3417

Ewuga, D and Adesi, M (2022) Integrating sustainability practices into the Irish construction supply chain: main contractors' perspective. Built Environment Project and Asset Management. ISSN 2044-124X

Ezcan, V and Goulding, JS (2022) Offsite Sustainability—Disentangling the Rhetoric through Informed Mindset Change. Sustainability, 14 (8). ISSN 2071-1050

Faisal, AAH, Bedah, BJ and Al-Hashimi, O (2022) Constructed Wetland Units Filled with Waterworks Sludge for Remediating of Wastewater Contaminated with Congo Red Dye. Iraqi Journal of Chemical and Petroleum Engineering, 23 (2). pp. 9-17. ISSN 1997-4884

Faisal, AAH, Nassir, ZS, Rashid, HM, Al-Hashimi, OA, Shubbar, AAF and Saleh, B (2022) Neural network for modeling the capture of lead and cadmium ions from wastewater using date palm stones. International Journal of Environmental Science and Technology. ISSN 1735-1472

Fasna, MFF, Gunatilake, S, Ross, A and Manewa, RMAS (2022) Implementing Energy Retrofits in Existing Hotel Buildings using In-House Teams: The Decision-making Process. Journal of Facilities Management. ISSN 1472-5967

Gao, Y, Zhang, Y, Zhang, C, Liu, X and Jing, R (2022) Quantifying oxygen diffusion in bitumen films using molecular dynamics simulations. Construction and Building Materials, 331. ISSN 0950-0618

Georgantzia, E, Ali, SB, Gkantou, M, Kamaris, GS, Kot, P and Hashim, K (2022) Numerical modelling of concrete-filled aluminium alloy 6082-T6 columns under axial compression. Journal of Physics: Conference Series, 2198 (1). 012045-012045. ISSN 1742-6588

Georgantzia, E, Gkantou, M and Kamaris, GS (2022) Aluminium alloy channel columns: Testing, numerical modelling and design. Thin-Walled Structures, 182 (A). ISSN 0263-8231

Georgantzia, E, Gkantou, M, Kamaris, GS and Kansara, KD (2022) Design of aluminium alloy channel sections under minor axis bending. Thin-Walled Structures, 174. ISSN 0263-8231

Georgantzia, E, Gkantou, M, Kamaris, GS and Kansara, KD (2022) Ultimate response and plastic design of aluminium alloy continuous beams. Structures, 39. pp. 175-193. ISSN 2352-0124

Georgantzia, E, Nikolaidis, T, Katakalos, K, Tsikaloudaki, K and Iliadis, T (2022) Dynamic Performance Analysis by Laboratory Tests of a Sustainable Prefabricated Composite Structural Wall System. Energies, 15 (9).

González, VG, Ruiz, GR, Du, H, Sánchez-Ostiz, A and Bandera, CF (2022) Weather Files for the Calibration of Building Energy Models. Applied Sciences, 12 (15). p. 7361.

Hamidifar, H, Mohammad Ali Nezhadian, D and Carnacina, I (2022) Experimental study of debris-induced scour around a slotted bridge pier. Acta Geophysica. ISSN 1895-6572

Han, S, Song, D, Xu, L, Ye, Y, Yan, S, Shi, F, Zhang, Y, Liu, X and Du, H (2022) Behaviour in public open spaces: A systematic review of studies with quantitative research methods. Building and Environment, 223. p. 109444. ISSN 0360-1323

Han, S, Ye, Y, Song, Y, Yan, S, Shi, F, Zhang, Y, Liu, X, Du, H and Song, D (2022) A Systematic Review of Objective Factors Influencing Behavior in Public Open Spaces. Frontiers in Public Health, 10. ISSN 2296-2565

Heaton, R, Martin, H, Chadee, A, Milling, A, Dunne, S and Borthwick, F (2022) The Construction Materials Conundrum: Practical Solutions to Address Integrated Supply Chain Complexities. Journal of Construction Engineering and Management, 148 (8). ISSN 0733-9364

Hyun, D and Heinig, S (2022) Different preferences, but the same approach: the practice of the sales comparison in the Berlin housing rental and sale market. Journal of Housing and the Built Environment. ISSN 1383-2336

Iseri, OK and Dursun, O (2022) The Impacts of Early Architectural Design Decisions on Building Performance. International Journal of Digital Innovation in the Built Environment, 11 (2). pp. 1-21. ISSN 2642-2263

Islam, GMS, Sarker, S, Sadique, MM and Shubbar, AAF (2022) Non-Fired Building Blocks Using Industrial Wastes. Journal of Engineering Science, 12 (3). pp. 1-10. ISSN 2075-4914

Islam, GMS, Shubbar, AAF, Sarker, S and Sadique, MM (2022) Ternary combined industrial wastes for non-fired brick. Australian Journal of Structural Engineering. ISSN 1328-7982

Jamaludin, L, Razak, RA, Abdullah, MMAB, Vizureanu, P, Brás, A, Imjai, T, Sandu, AV, Abd Rahim, SZ and Yong, HC (2022) The Suitability of Photocatalyst Precursor Materials in Geopolymer Coating Applications: A Review. Coatings, 12 (9). p. 1348. ISSN 2079-6412

Jannat, N, Cullen, J, Abdullah, B, Latif Al-Mufti, RA and Karyono, K (2022) Thermophysical Properties of Sawdust and Coconut Coir Dust Incorporated Unfired Clay Blocks. Construction Materials, 2 (4). pp. 234-257.

Jannat, N, Latif Al-Mufti, RA and Hussien, A (2022) Eggshell and Walnut Shell in Unburnt Clay Blocks. CivilEng, 3 (2). pp. 263-276.

Jones, ID, Lane, DA, Lotto, RR, Oxborough, D, Neubeck, L, Penson, PE, Czanner, G, Shaw, A, Johnston-Smith, E, Santos, A, McGinn, EE, Ajiboye, A, Town, N and Lip, GYH (2022) Supermarket/Hypermarket Opportunistic Screening for Atrial Fibrillation (SHOPS-AF): A Mixed Methods Feasibility Study Protocol. Journal of Personalized Medicine, 12 (4). ISSN 2075-4426

Kamaris, GS, Papavasileiou, GS, Kamperidis, VC and Vasdravellis, G (2022) Residual drift risk of self-centering steel MRFs with novel steel column bases in near-fault regions. Soil Dynamics and Earthquake Engineering, 162. p. 107391. ISSN 0267-7261

Karaghool, HAK, Hashim, KS, Kot, P and Muradov, M (2022) Preliminary Studies of Methylene Blue Remotion from Aqueous Solutions by Ocimum basilicum. Environments, 9 (2). ISSN 2076-3298

Khudhair, ZS, Zubaidi, SL, Ortega-Martorell, S, Al-Ansari, N, Ethaib, S and Hashim, KS (2022) A Review of Hybrid Soft Computing and Data Pre-Processing Techniques to Forecast Freshwater Quality’s Parameters: Current Trends and Future Directions. Environments, 9 (7). ISSN 2076-3298

Kontovas, C, Armada Bras, AM, Chang, C-H, Romano, A, Poo, MC-P, Wang, J, McCormack, H, Qu, Z, Paraskevadakis, D, Lamb, LE and Yang, Z (2022) Fostering innovation in the blue economy within the United Kingdom (UK): A stakeholders’ perspective. Ocean and Coastal Management, 224 (106143). ISSN 0964-5691

Lattieff, FA, Atiya, MA, Lateef, RA, Dulaimi, AF, Jweeg, MJ, Abed, AM, Mahdi, JM and Talebizadehsardari, P (2022) Thermal analysis of horizontal earth-air heat exchangers in a subtropical climate: An experimental study. Frontiers in Built Environment, 8. ISSN 2297-3362

Li, Y, Feng, J, Wu, S, Chen, A, Kuang, D, Bai, T, Gao, Y, Zhang, J, Li, L, Wan, L, Liu, Q, Chen, Z and Gu, D (2022) Review of ultraviolet ageing mechanisms and anti-ageing methods for asphalt binders. Journal of Road Engineering, 2 (2). pp. 137-155. ISSN 2097-0498

Liu, Y, Liu, B, Ur-Rehman, M, Imran, M, Akinsolu, MO, Excell, P and Hua, Q (2022) An Efficient Method for Antenna Design Based on a Self-Adaptive Bayesian Neural Network Assisted Global Optimization Technique. IEEE Transactions on Antennas and Propagation, 70 (12). pp. 11375-11388. ISSN 0018-926X

Mahyuddin, N, Jamaludin, NM, Hussien, A, Akashah, FW, Azmi, NFB, Cotgrave, A and Riley, M (2022) Assessing the impact of indoor plants towards physical indoor office building environment in hot and humid climates. Journal of Design and Built Environment, 22 (1). pp. 34-54. ISSN 1823-4208

Maliene, V, Fowles, S, Atkinson, I and Malys, N (2022) A sustainability assessment framework for the high street. Cities, 124. ISSN 0264-2751

Mayakuntla, PK, Ghosh, D and Ganguli, A (2022) Classification of Corrosion Severity in Concrete Structures Using Ultrasonic Imaging and Linear Discriminant Analysis. Sustainability, 14 (23).

Megdiche, I, Atherton, W, Allanson, D and Harris, C (2022) Effect of mitigation on the catastrophic failure of storage tanks. Journal of Loss Prevention in the Process Industries, 80. pp. 1-14. ISSN 0950-4230

Mohammed, SJ, Zubaidi, SL, Ortega-Martorell, S, Al-Ansari, N, Ethaib, S and Hashim, K (2022) Application of hybrid machine learning models and data pre-processing to predict water level of watersheds: Recent trends and future perspective. Cogent Engineering, 9 (1).

Mohi-ud-din, G, Zhiqiang, L, Jiangbin, Z, Sifei, W, Xinyu, Z, Zizheng, L, Zhijun, L and Asim, M (2022) A Novel Learning-Based Attack Detection System for Enhancing Security in Cyber-Physical Environments. Computer Science and Technology, 1 (1).

Muradov, M, Kot, P, Markiewicz, J, Łapiński, S, Tobiasz, A, Onisk, K, Shaw, A, Hashim, KS, Zawieska, D and Mohi-Ud-din, G (2022) Non-Destructive System for In-Wall Moisture Assessment of Cultural Heritage Buildings. Measurement, 203. ISSN 0263-2241

Mustafa, S, Hameed, MA and Dulaimi, AF (2022) Evaluation of the properties of modified local asphalt binder by using styrene butadiene rubber (SBR) or low-density polyethylene (LDPE). Scientific Review Engineering and Environmental Studies (SREES), 31 (3). pp. 190-202.

Naghipour, D, Taghavi, K, Jaafari, J, Hashim, KS, Javan Mahjoub Doust, F and Mahjoub Doust, MJ (2022) Evaluation of the efficacy of Fe2O3 magnetised kaolin: Simultaneous removal of ceftriaxone and cefixime from aqueous media. International Journal of Environmental Analytical Chemistry. pp. 1-18. ISSN 0306-7319

Najim, FT, Bahlekeh, A, Mohammed, HI, Dulaimi, A, Abed, AM, Ibrahem, RK, Al-Qrimli, FA, Mahmoud, MZ, Awrejcewicz, J and Pawłowski, W (2022) Evaluation of Melting Mechanism and Natural Convection Effect in a Triplex Tube Heat Storage System with a Novel Fin Arrangement. Sustainability, 14 (17). ISSN 2071-1050

Nasir, MJ, Abdulhasan, MJ, Ridha, SZA, Hashim, KS and Jasim, HM (2022) Statistical assessment for performance of Al-Mussaib drinking water treatment plant at the year 2020. Water Practice and Technology. ISSN 1751-231X

Obaid, HA, Hashim, TM, Al-Abody, AAM, Nasr, MS, Abbas, GH, Kadhim, AM and Sadique, M (2022) Properties of Modified Warm-Mix Asphalt Mixtures Containing Different Percentages of Reclaimed Asphalt Pavement. Energies, 15 (20). ISSN 1996-1073

Ojuri, OO, Osagie, PO, Oluyemi-Ayibiowu, BD, Fadugba, OG, Tanimola, MO, Chauhan, VB and Jayejeje, OO (2022) Eco-friendly stabilization of highway lateritic soil with cow bone powder admixed lime and plastic granules reinforcement. Cleaner Waste Systems, 2. ISSN 2772-9125

Ojuri, OO, Ramdas, V, Aderibigbe, EA, Williams, CG, Ramchuran, S and Al-Nageim, H (2022) Improving strength and hydraulic characteristics of regional clayey soils using biopolymers. Case Studies in Construction Materials, 17. ISSN 2214-5095

Okoro, C, Owojori, OM and Umeokafor, N (2022) The Developmental Trajectory of a Decade of Research on Mental Health and Wellbeing amongst Graduate Students: A Bibliometric Analysis. International Journal of Environmental Research and Public Health, 19 (9). ISSN 1660-4601

Omoregie, AI, Muda, K, Bakri, MKB, Rahman, MR, Yusof, FAM and Ojuri, OO (2022) Calcium carbonate bioprecipitation mediated by ureolytic bacteria grown in pelletized organic manure medium. Biomass Conversion and Biorefinery. ISSN 2190-6815

Omoregie, AI, Muda, K, Ojuri, OO, Hong, C, Pauzi, F and Ali, N (2022) The global research trend on microbially induced carbonate precipitation during 2001–2021: a bibliometric review. Environmental Science and Pollution Research. ISSN 0944-1344

Paital, B, Das, K, Malekdar, F, Sandoval, MA, Niaragh, EK, Frontistis, Z, Behera, TR, Balacco, G, Sangkham, S, Hati, AK and Mousazadeh, M (2022) A State-of-the-Art Review on SARS-CoV-2 Virus Removal Using Different Wastewater Treatment Strategies. Environments, 9 (9).

Pannozzo, N, Smedley, RK, Chiverrell, RC, Carnacina, I and Leonardi, N (2022) An Integration of Numerical Modeling and Paleoenvironmental Analysis Reveals the Effects of Embankment Construction on Long‐Term Salt Marsh Accretion. Journal of Geophysical Research: Earth Surface, 127 (5). ISSN 2169-9003

Pontes, P, Gonçalves, I, Andredaki, M, Georgoulas, A, Moreira, ALN and Moita, AS (2022) Fluid flow and heat transfer in microchannel devices for cooling applications: Experimental and numerical approaches. Applied Thermal Engineering, 218. ISSN 1359-4311

Ren, S, Liu, X, Erkens, S, Lin, P and Gao, Y (2022) Multi-component analysis, molecular model construction, and thermodynamics performance prediction on various rejuvenators of aged bitumen. Journal of Molecular Liquids, 360. ISSN 0167-7322

Ren, S, Liu, X, Lin, P, Erkens, S and Gao, Y (2022) Chemical characterizations and molecular dynamics simulations on different rejuvenators for aged bitumen recycling. Fuel, 324. ISSN 0016-2361

Ren, S, Liu, X, Lin, P, Gao, Y and Erkens, S (2022) Insight into the compatibility behaviors between various rejuvenators and aged bitumen: Molecular dynamics simulation and experimental validation. Materials and Design, 223. ISSN 0264-1275

Ren, S, Liu, X, Lin, P, Gao, Y and Erkens, S (2022) Molecular dynamics simulation on bulk bitumen systems and its potential connections to macroscale performance: Review and discussion. Fuel, 328. ISSN 0016-2361

Ren, S, Liu, X, Lin, P, Gao, Y and Erkens, S (2022) Review on the diffusive and interfacial performance of bituminous materials: From a perspective of molecular dynamics simulation. Journal of Molecular Liquids, 366. ISSN 0167-7322

Rhodes, O, Rostami, A, Khodadadyan, A and Dunne, S (2022) Response Strategies of UK Construction Contractors to COVID-19 in the Consideration of New Projects. Buildings, 12 (7). p. 946.

Romanov, D, Korostynska, O, Lekang, OI and Mason, A (2022) Towards human-robot collaboration in meat processing: Challenges and possibilities. Journal of Food Engineering, 331. ISSN 0260-8774

Salman, JM, Kaizal, AF and Kot, P (2022) Evaluation of Some Heavy Metals, Their Fate and Transportation in Water, Sediment, and Some Biota within AL-Musayyib River, Babylon Governorate, Iraq. Baghdad Science Journal, 20 (2). pp. 600-615. ISSN 2078-8665

Shah, MN, Mulliner, E, Singh, TP and K. Ahuja, A (2022) CRITICAL SUCCESS FACTORS FOR AFFORDABLE HOUSING: EVIDENCE FROM LOWER-MIDDLE INCOME AND HIGH INCOME ECONOMIES. Journal of Surveying, Construction and Property (JSCP), 13 (1). pp. 1-19. ISSN 1985-7527

Shaw, A, Idowu, IA, Hashim, K and Nunes, LJR (2022) Energy recovery from brewery spent grains and spent coffee grounds: a circular economy approach to waste valorization. Biofuels. ISSN 1759-7269

Strohle, M, Sadique, MM, Dulaimi, AF and Kadhim, MA (2022) Prospect and barrier of 3D concrete: a systematic review. Innovative Infrastructure Solutions, 8 (1). ISSN 2364-4176

Swettenham, L and Whitehead, AE (2022) ACT-ing on Injury: Increasing Psychological Flexibility and Adherence to Rehabilitation. Case Studies in Sport and Exercise Psychology, 6 (1). pp. 94-101. ISSN 2470-4857

Tiji, ME, Al-Azzawi, WK, Mohammed, HI, Dulaimi, AF, Rashid, FL, Mahdi, JM, Majdi, HS, Talebizadehsardari, P and Ali, HM (2022) Thermal Management of the Melting Process in a Latent Heat Triplex Tube Storage System Using Different Configurations of Frustum Tubes. Journal of Nanomaterials, 2022. pp. 1-14. ISSN 1687-4110

Torres de Sande, V, Sadique, M, Brás, A and Pineda, P (2022) Activated sugarcane bagasse ash as efficient admixture in cement-based mortars: Mechanical and durability improvements. Journal of Building Engineering, 59. ISSN 2352-7102

Tumelienė, E, Sužiedelytė Visockienė, J and Maliene, V (2022) Evaluating the Eligibility of Abandoned Agricultural Land for the Development of Wind Energy in Lithuania. Sustainability, 14 (21).

Umar, T and Umeokafor, N (2022) Developing a Safety Climate Assessment Tool for Omani Construction Industry. International Journal of Service Science, Management, Engineering, and Technology, 13 (1). pp. 1-24. ISSN 1947-959X

Umeokafor, N, Umar, T and Evangelinos, K (2022) Bibliometric and scientometric analysis-based review of construction safety and health research in developing countries from 1990 to 2021. Safety Science, 156. ISSN 0925-7535

Umeokafor, N, Windapo, A, Manu, P, Diugwu, I and Haroglu, H (2022) Critical Barriers to Prevention through Design in Construction in Nigeria: A Qualitative Inquiry. Engineering, Construction and Architectural Management. ISSN 0969-9988

Vejchodská, E, Barreira, AP, Auziņš, A, Jürgenson, E, Fowles, S and Maliene, V (2022) Bridging land value capture with land rent narratives. Land Use Policy, 114. ISSN 0264-8377

Wu, J, Wang, H, Liu, Q, Gao, Y and Liu, S (2022) A Temperature-Independent Methodology for Polymer Bitumen Modification Evaluation Based on DSR Measurement. Polymers, 14 (5). p. 848. ISSN 2073-4360

Yi, J, Feng, J, Li, Y, Bai, T, Chen, A, Gao, Y, Wu, F, Wu, S, Liu, Q and Li, C (2022) Research on Design and Performance of Self-Compacting Cement Emulsified Bitumen Mixture (CEBM). Materials, 15 (14). ISSN 1996-1944

Zubaidi, S, Al-Bdairi, NSS, Ortega Martorell, S, Ridha, HM, Al-Bugharbee, H, Hashim, KS and Gharghan, SK (2022) Assessing the Benefits of Nature-Inspired Algorithms for the Parameterisation of ANN in the Prediction of Water Demand. Journal of Water Resources Planning and Management, 149 (1). ISSN 0733-9496

Book Section

Kalinowska, K, Zachar, P and Kot, P (2022) Wykorzystanie algorytmów uczenia maszynowego w procesie identyfikacji zwłok i szczątków ludzkich o nieustalonej tożsamości. In: Kalinowska, Kamila and Zawieska, Dorota, (eds.) Wybrane Aspekty Nauk Penalnych. ArchaeGraph, Lodz, pp. 335-351. ISBN 978-83-67527-12-5

Conference or Workshop Item

Chandrasekar, R, Gkantou, M, Nikitas, G, Hashim, KS, Pradeep, HR and Ahuja, A (2022) Integration of 3D Concrete Printing in the Construction Industry: A Short Review. In: Current Trends in Geotechnical Engineering and Construction . pp. 445-452. (International Conference on Geotechnical Engineering, Baghdad, Iraq).

Hashim, KS, Idowu, IO, Mustafina, J, Amoako-Attah, J, Nikitas, G and Al-Jumeily, D (2022) RSM (Response Surface Methodology) Modelling of Inter-Electrodes Spacing Effects on Phosphate Removal. In: 2021 14th International Conference on Developments in eSystems Engineering (DeSE) . pp. 586-589. (2021 14th International Conference on Developments in eSystems Engineering (DeSE), 07 December 2021 - 10 December 2021, Sharjah, UAE).

Markiewicz, J, Bochenska, A, Kot, P, Lapinski, S and Muradov, M (2022) The Integration of The Multi-Source Data for Multi-Temporal Investigation of Cultural Heritage Objects. In: 2021 14th International Conference on Developments in eSystems Engineering (DeSE) . (The 14th International Conference on the Developments on eSystems Engineering (DeSE2021), 07 December 2021 - 10 December 2021, Sharjah, UAE).

Markiewicz, J, Gorecka, K, Zawieska, D, Zielinski, M, Lapinski, S and Kot, P (2022) The Integration of the Multi-Temporal Conservation Works and Non-Invasive Measurements. In: The International Archives of Photogrammetry, Remote Sensing and Spatial Information Sciences . pp. 343-349. (9th Intl. Workshop 3D-ARCH “3D Virtual Reconstruction and Visualization of Complex Architectures, 02 March 2022 - 04 March 2022, Mantova, Italy).

Shah, R, Kraidi, L, Matipa, W and Borthwick, F (2022) Investigation of the Risk Factors Causing Safety and Delay Issues in Oil and Gas Pipeline Construction Projects. In: Conference Proceedings GCMM 2021 Advances in Manufacturing Processes, Intelligent Methods and Systems in Production Engineering , 335. pp. 313-326. (Advances in Manufacturing Processes, Intelligent Methods and Systems in Production Engineering, 7-9th June 2021, Liverpool, UK).

Shah, RK, Kraidi, L, Matipa, WM and Borthwick, F (2022) A Model for Delay Analysis Impact at Planning Phase of Oil & Gas Pipeline Projects: A case of Iraq. In: EPiC Series in Built Environment: ASC 2022, 58th Annual Associated Schools of Construction International Conference: , 3. pp. 299-307. (ASC2022: 58th Annual Associated Schools of Construction International Conference, 20th-23rd April 2022, Atlanta, GA, United States).

Umar, T, Tahir, A, Umeokafor, N, Nawarathna, A, Zia, A and Vali, MSH (2022) An Experimental Investigation on Strength Characteristics of Concrete Using Wastepaper Sludge Ash (WPSA). In: CITC-12 Proceedings . (CITC-12 -12th International Conference on Construction in the 21st Century, May 16th - 19th 2022, Jordan).

Umar, T, Umeokafor, N, Vali, MSH and Zia, A (2022) A Comparative Study of Occupational Safety and Health (OS&H) Regulations in United States, United Kingdom, Australia, South Africa, and Oman. In: IOP Conference Series: Earth and Environmental Science , 1101. (22nd CIB World Building Congress, 27th June to 30th June 2022, Australia).

Thesis

Abdulhadi, B (2022) Enhancing the removal of refractory pollutants from water using microwave-electrocoagulation system. Doctoral thesis, Liverpool John Moores University.

Al Hawesah, H (2022) Development of Polymer Modified Pelletised Bitumin for Utility Reinstatements and Emergency Pothole Repair. Doctoral thesis, Liverpool John Moores University.

Dissanayaka Mudiyanselage, C (2022) A novel model for electrocoagulation reactors: process-based approach to address the design and scale-up issues. Doctoral thesis, Liverpool John Moores University.

Georgantzia, E (2022) Structural Response and Design of Aluminium Alloy Members. Doctoral thesis, Liverpool John Moores University.