A

Abrams, G, Di Modica, K, Bezombes, F, Bonjean, D, Burton, DR, Lilley, F, Nikolopoulos, S, Precioso, F, Stretcha, C, Thomaidou, E, Ververidis, D and De Groote, IEPM (2016) DigiArt: towards a virtualization of Cultural Heritage. Notae Praehistoricae, 36. pp. 131-142.

Abu-Rahmeh, O (2009) A statistical mechanics approach for an effective, scalable, and reliable distributed load balancing scheme for grid networks. Doctoral thesis, Liverpool John Moores University.

Ateeq, M, Shaw, A, Garrett, R and Dickson, P (2016) Feasibility study on using microwave sensing technique to analyse silver-based products. Journal of Electromagnetic Waves and Applications. ISSN 1569-3937

B

Bell, F, Fletcher, G, Griffiths, M, Greenhill, A and McLean, R (2014) Making MadLab: A creative space for innovation and creating prototypes. Technological Forecasting and Social Change, 84. pp. 43-53. ISSN 0040-1625

Bhih, A (2018) HIGH PERFORMANCE DECENTRALISED COMMUNITY DETECTION ALGORITHMS FOR BIG DATA FROM SMART COMMUNICATION APPLICATIONS. Doctoral thesis, Liverpool John Moores University.

Brooks, PA (2014) Dancing Together: Two halves of a whole. MAPA D2, 1 (1). pp. 214-225.

C

Chai, Z, Ma, J, Zhang, WD, Govoreanu, B, Zhang, JF, Ji, Z and Jurczak, M (2017) Probing the Critical Region of Conductive Filament in Nanoscale HfO₂ Resistive-Switching Device by Random Telegraph Signals. IEEE Transactions on Electron Devices. ISSN 0018-9383

Chen, X and Oluwajobi, AO (2016) Characterization of Atomic Surface Roughness in Nanometric Machining Molecular Dynamics (MD) Simulations. Current Nanoscience, 12. ISSN 1573-4137

Chen, X and Oluwajobi, AO (2016) Molecular Dynamics (MD) Simulation of Multi-pass Nanometric Machining – The Effect of Machining Conditions. Current Nanoscience, 12. ISSN 1573-4137

D

Deng, W, Zhang, G, Murphy, MF, Lilley, F, Harvey, DM and Burton, DR (2015) Analysis of dynamic cantilever behavior in tapping mode atomic force microscopy. Microscopy Research and Technique, 78 (10). pp. 935-946. ISSN 1097-0029

G

Gu, Y (2010) Biomechanical investigation of the human foot deformation under different landing conditions using finite element analysis. Doctoral thesis, Liverpool John Moores University.

Guo, FB (2016) Switching From Lecture to Design Workshop. In: 10th International Technology Education and Development Conference, 2016., 07 March 2016 - 09 March 2016, Valencia. (Unpublished)

Guo, FB and Finlay, PJ (2015) Aligning teaching and learning approach and assessment method to enhance the quality of higher design education. In: INTED2015 Proceedings 2015 . pp. 1859-1866. (9th International Technology Education and Development Conference,2015, 02 March 2015 - 04 March 2015, Madrid).

Guo, FB and Finlay, PJ (2015) Educating Design Professionals In The 21st Century. In: The 17th International Conference on Engineering and Product Design Education, 03 September 2015 - 04 September 2015, Loughborough University Design School. (Unpublished)

H

Hagendorf, O (2009) Simulation based parameter and structure optimisation of discrete event systems. Doctoral thesis, Liverpool John Moores University.

Haggerty, J, Haggerty, S and Taylor, MJ (2014) Forensic triage of email network narratives through visualisation. Information Management and Computer Security, 4 (22). pp. 358-370. ISSN 1758-5805

Haslinger, SG, Jones, IS, Movchan, NV and Movchan, AB (2018) Localization in semi-infinite herringbone waveguides. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 474 (2211). ISSN 1364-5021

Haslinger, SG, Jones, IS, Movchan, NV and Movchan, AB (2018) Semi-infinite herringbone waveguides in elastic plates. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. ISSN 1364-5021

Herbst, MGJ (2014) Effect of Chloride on Environmentally Assisted Cracking of Low Alloy Steels in Oxygenated High Temperature Water. Doctoral thesis, Liverpool John Moores University.

Higgins, E, Taylor, MJ, Francis, H, Jones, M and Appleton, D (2014) The evolution of geographical information systems for fire prevention support. Fire Safety Journal, 69. pp. 117-125. ISSN 0379-7112

I

Iqbal, F, Benjamin, Y, Shah, B, Maryam, A, Naeema, A, Suaad, Q and Baker, T Drone Forensics: Examination and Analysis. International Journal of Electronic Security and Digital Forensics. ISSN 1751-911X (Accepted)

J

Ji, Z, Ren, P, Duan, M and Zhang, JF (2015) New Insights into the Design for End-of-life Variability of NBTI in Scaled High-κ/Metal-gate Technology for the nano-Reliability Era. In: Electron Devices Meeting (IEDM), 2014 IEEE International . 34.1.1-34.1.4. (Electron Devices Meeting, 15th - 17th December 2014, San Francisco, CA).

K

Kadoury, AH (1986) Turbulent velocity distribution in free vortices above a vertical draw-off. Doctoral thesis, Liverpool John Moores University.

Kaewmuang, P, Pudkon, W, Prasatkhetragarn, A, Nimmanpipug, P, Kittiwachana, S and Kaowphong, S (2018) Comparison of sizes, morphologies and optical properties of nio nanostructures synthesized using acetate and nitrate anions from nickel salts via hydrothermal method. Chiang Mai Journal of Science, 45 (2). pp. 1122-1128. ISSN 0125-2526

Krywonos, J (2011) Numerical modelling of bladder filling and prostate positioning in modern radiotherapy. Doctoral thesis, Liverpool John Moores University.

L

Langton, SRH, Law, AS, Burton, AM and Schweinberger, SR (2008) Attention capture by faces. Cognition, 107 (1). pp. 330-342. ISSN 0010-0277

Lee, GM (2014) Extending the Devices Profile for Web Services Standard Using a REST Proxy. IEEE Internet Computing, 19 (1). pp. 10-17. ISSN 1941-0131

Lee, GM (2014) A Web Based Energy Cloud Platform for Campus Smart Grid for Understanding Energy Consumption Profile and Predicting Future Energy Demand. In: 2014 International Conference on Information and Communication Technology Convergence (ICTC), 22-24 October 2014, Busan.

Lee, GM (2015) A Web-based IPTV Content Syndication System for Personalized Content Guide. Journal of Communications Networks, 17 (1). pp. 67-74. ISSN 1229-2370

Leiblein, T, Tucker, MP, Ashall, MC, lee, SB, Gollnisch, C and Hofer, S (2016) Legionella and risk management in hospitals - A bibliographic research methodology for people responsible for built environments and facility management. International Journal of Hygiene and Environmental Health. ISSN 1618-131X

Li, C, Nguyen, TT, Wu, M, Yang, M and Zeng, S (2018) An Open Framework for Constructing Continuous Optimization Problems. IEEE Transactions on Cybernetics. ISSN 2168-2275

M

Ma, F, Chen, Y-W, Huang, Z-C, Yan, X-P and Wang, J (2016) A novel approach of collision assessment for coastal radar surveillance. RELIABILITY ENGINEERING & SYSTEM SAFETY, 155. pp. 179-195. ISSN 0951-8320

Malik, S, Ruddock, F, Dowling, A, Byrne, K, Schmitt, W, Khalakhan, I, Nemoto, Y, Guo, H, Shrestha, LK, Ariga, K and Hill, J (2018) Graphene composites with dental and biomedical applicability. Beilstein Journal of Nanotechnology, 9. pp. 801-808. ISSN 2190-4286

Marnerides, A, James, C, Schaeffer-Filho, A, Sait, S, Mauthe, A and Murthy, H (2011) Multi-level Network Resilience: Traffic Analysis, Anomaly Detection and Simulation. ICTACT Journal on Communication Technology, Special Issue on Next Generation Wireless Networks and Applications, 2 (2). ISSN 2229-6948

Marnerides, A, Smith, P, Schaeffer, A and Mauthe, A (2014) Power Consumption Profiling Using Energy Time-Frequency Distributions in Smart Grids. IEEE Communications Letters, 19 (1). pp. 46-49. ISSN 1089-7798

Mason, A (2008) Wireless sensor networks and their industrial applications. Doctoral thesis, Liverpool John Moores University.

Murphy, MF, Edwards, T, Hobbs, G, Shepherd, J and Bezombes, F (2016) Acoustic Vibration Can Enhance Bacterial Biofilm Formation. Journal of Bioscience and Bioengineering. ISSN 1347-4421

O

Oon, CS, Yew, SN, Chew, BT, Newaz, KMS, Al-Shamma'a, A, Shaw, A and Amiri, A (2015) Numerical simulation of heat transfer to separation tio(2)/water nanofluids flow in an asymmetric abrupt expansion. EFM14 - EXPERIMENTAL FLUID MECHANICS 2014, 92. ISSN 2100-014X

O’Hare, D, Hurst, W, Tully, D and El Rhalibi, A (2017) A Study into Autonomous Scanning for 3D Model Construction. In: Springer Lecture Notes in Computer Science (LNCS) series. . pp. 182-190. (The International Conference on E-learning and Games (Edutainment 2017), 26 June 2017 - 28 June 2017, Bournemouth, UK).

R

Rajarathianm, K, Gomm, JB, Jones, KO and Yu, DL (2015) Predetermined time constant approximation method for optimising search space boundary by standard genetic algorithm. In: ACM International Conference Proceeding Series , 1008. pp. 38-45. (16th International Conference on Computer Systems and Technologies, 25th - 26th June 2015, Dublin Ireland).

Rajarathinam, K, Gomm, JB, Yu, DL and Abdelhadi, AS (2015) An improved search space resizing method for model identification by Standard Genetic Algorithm. In: 2015 21st International Conference on Automation and Computing: Automation, Computing and Manufacturing for New Economic Growth, ICAC 2015 . (21st International Conference on Automation and Computing, 11th - 12th September 2015, University of Strathclyde, Glasgow, UK).

Reyes Moro, A (2000) Scheduling of flexible manufacturing systems integrating petri nets and artificial intelligence methods. Doctoral thesis, Liverpool John Moores University.

S

Shudong, L, Zhang, Y, Gu, Y, Lake, MJ and Ren, X Experimental Studies and Effective Finite Element Modelling of Foot Deformation in Standing. International Journal of Experimental and Computational Biomechanics. ISSN 1755-8735 (Accepted)

Stavrinides, A J (2012) Isothermal microwave biology : catalysis and fermentation. Doctoral thesis, Liverpool John Moores University.

T

Tang, SOT and Hanneghan, M (2011) State-of-the-Art Model Driven Game Development: A Survey of Technological Solutions for Game-Based Learning. Journal of Interactive Learning Research, 22 (4). pp. 551-605. ISSN 1093-023x

Taylor, MJ, Haggerty, J, Gresty, D, Almond, P and Berry, T (2014) Forensic investigation of social networking applications. Network Security (11). pp. 9-16. ISSN 1353-4858

Taylor, MJ, Higgins, E and Francis, H (2015) A Systemic Approach to Multi-agency Community Safety. SYSTEMS RESEARCH AND BEHAVIORAL SCIENCE, 32 (3). pp. 344-357. ISSN 1092-7026

Taylor, MJ, Higgins, E, Lisboa, P and Arshad, F (2014) Developing a data sharing framework: a case study. Transforming Government: People, Process and Policy, 1 (8). pp. 151-164. ISSN 1750-6174

Taylor, MJ, Stables, R, Matata, B, Lisboa, P, Laws, A and Almond, P (2014) Website design: Technical, social and medical issues for self-reporting by elderly patients. HEALTH INFORMATICS JOURNAL, 20 (2). pp. 136-150. ISSN 1460-4582

Thapa, GJ, Thapa, K, Thapa, R, Jnawali, SR, Wich, SA, Poudyal, LP and Karki, S (2018) Counting crocodiles from the sky: Monitoring the critically endangered gharial (Gavialis gangeticus) population with an Unmanned Aerial Vehicle (UAV). Journal of Unmanned Vehicle Systems. ISSN 2291-3467

Tucker, SS and Bleil de Souza, C (2017) Placing User Needs at the Centre of Building Performance Simulation: Transferring Knowledge from Human Computer Interaction. In: BSO 2016 Proceedings , 27 (1). (Building Simulation & Optimization 2016, 12 September 2016 - 14 September 2016, Newcastle University).

Y

Yang, Z, Guo, L and Yang, Z (2017) Emergency logistics for wildfire suppression based on forecasted disaster evolution. Annals of Operations Research. ISSN 0254-5330

Yazdani, D, Nguyen, TT and Branke, J Robust optimization over time by learning problem space characteristics. IEEE Transactions on Evolutionary Computation. ISSN 1089-778X (Accepted)