Items where Subject is "TJ Mechanical engineering and machinery"
Up a level |
- Library of Congress Subject Areas (186)
- T Technology (186)
- TJ Mechanical engineering and machinery (186)
- T Technology (186)
A
Ackermans, TMA, Francksen, NC, Casaña-Eslava, RV, Lees, C, Baltzopoulos, V, Lisboa, PJG, Hollands, MA, O'Brien, TD and Maganaris, CN (2020) Stair negotiation behaviour of older individuals: Do step dimensions matter? Journal of Biomechanics. ISSN 1873-2380
Adeniyi, O (2019) A STUDY OF THE THERMAL CYCLING PERFORMANCE OF SOLDER JOINTS IN AREA ARRAY PACKAGING. Doctoral thesis, Liverpool John Moores University.
Ahuir-Torres, JI, Simandjuntak, S, Bausch, N, Farrar, A, Webb, S, Nash, A, Thomas, B, Muna, J, Jonsson, C and Matthew, D (2019) Corrosion threshold data of metallic materials in various operating environment of offshore wind turbine parts (tower, foundation, and nacelle/gearbox). Data in Brief, 25. ISSN 2352-3409
Al Sa'd, M S (2011) A real-time multi-sensor 3D surface shape measurement system using fringe analysis. Doctoral thesis, Liverpool John Moores University.
Al-Busaltan, S, Dulaimi, A, Al-Nageim, H, Mahmood, S, Kadhim, MA, Al-Kafaji, M and Özkılıç, YO (2023) Improving the Mechanical Properties and Durability of Cold Bitumen Emulsion Mixtures Using Waste Products and Microwave Heating Energy. Buildings, 13 (2).
Al-Waidh, A (2015) Manufacture of metamaterials using laser processing techniques. Doctoral thesis, Liverpool John Moores University.
Alharbi, WNH (2018) Development of a Closed Loop Control System for Vibratory Milling. Doctoral thesis, Liverpool John Moores University.
Alremeihi, M, Norman, R, Pazouki, K, Dev, A and Bashir, M (2021) Advanced Intelligent Control Strategy in Dynamic Positioning (DP) System Applied to a Semi-Submersible Drilling Platform in The North Sea. In: Proceedings of the ASME 2021 40th International Conference on Ocean, Offshore and Arctic Engineering OMAE2021 , OMAE20. (40th International Conference on Ocean, Offshore & Arctic Engineering, 21-30 June 2021, Online).
Andredaki, M, Vontas, K, Georgoulas, A, Miché, N and Marengo, M (2021) The effect of channel aspect ratio on flow boiling characteristics within rectangular micro-passages. International Journal of Heat and Mass Transfer, 183 (C). ISSN 0017-9310
Armin, M, Day, S, Karimirad, M and Khorasanchi, M (2021) On the development of a nonlinear time-domain numerical method for describing vortex-induced vibration and wake interference of two cylinders using experimental results. Nonlinear Dynamics, 104. pp. 3517-3531. ISSN 0924-090X
Armin, M, Khorasanchi, M and Day, S (2018) Wake interference of two identical oscillating cylinders in tandem: An experimental study. Ocean Engineering, 166. pp. 311-323. ISSN 0029-8018
Ashkanfar, A (2015) A COMPUTATIONAL APPROACH TO FRETTING WEAR PREDICTION IN TOTAL HIP REPLACEMENTS. Doctoral thesis, Liverpool John Moores University.
Ashkanfar, A, Langton, DJ and Joyce, TJ (2017) Does a micro-grooved trunnion stem surface finish improve fixation and reduce fretting wear at the taper junction of total hip replacements? A finite element evaluation. Journal of Biomechanics, 63. pp. 47-54. ISSN 1873-2380
Ashkanfar, A, Langton, DJ and Joyce, TJ (2017) A large taper mismatch is one of the key factors behind high wear rates and failure at the taper junction of total hip replacements: A finite element wear analysis. Journal of the Mechanical Behavior of Biomedical Materials, 69. pp. 257-266. ISSN 1751-6161
Ashwath, P, Xavior, MA, Batako, ADL, Jeyapandiarajan, P and Joel, J (2022) Selective laser melting of Al–Si–10Mg alloy: microstructural studies and mechanical properties assessment. Journal of Materials Research and Technology, 17. pp. 2249-2258. ISSN 2238-7854
Asuquo, MP (2018) Development of an Efficient Planned Maintenance Framework for Marine and Offshore Machinery Operating under Highly Uncertain Environment. Doctoral thesis, Liverpool John Moores University.
Asuquo, MP, Wang, J, Zhang, L and Phylip-Jones, G (2019) Application of a multiple attribute group decision making (MAGDM) model for selecting appropriate maintenance strategy for marine and offshore machinery operations. Ocean Engineering, 179. pp. 246-260. ISSN 0029-8018
Asuquo, MP, Wang, J, Zhang, L and Phylip-Jones, G (2020) An integrated risk assessment for maintenance prediction of oil wetted gearbox and bearing in marine and offshore industries using a fuzzy rule base method. Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment. ISSN 1475-0902
B
Baines-Jones, V A (2010) Nozzle Design for Improved Useful Fluid Flow in Grinding. Doctoral thesis, Liverpool John Moores University.
Baishya, K, Harvey, DM, Partida Manzanera, T, Zhang, G and Braden, DR (2022) Failure patterns of solder joints identified through lifetime vibration tests. Nondestructive Testing and Evaluation. pp. 1-25. ISSN 1058-9759
Baker, JL and Einav, I (2021) Deep velocimetry: Extracting full velocity distributions from projected images of flowing media. Experiments in Fluids, 62 (5). ISSN 0723-4864
Barczak, L (2010) Application of Minimum Quantity Lubrication (MQL) in Plane Surface Grinding. Doctoral thesis, Liverpool John Moores University.
Barreira, P, Drust, B, Robinson, MA and Vanrenterghem, J (2015) Asymmetry after Hamstring Injury in English Premier League: Issue Resolved, Or Perhaps Not? INTERNATIONAL JOURNAL OF SPORTS MEDICINE, 36 (6). pp. 455-459. ISSN 0172-4622
Bechcinski, G, Ewad, H, Tsiakoumis, V, Pawlowski, W, Kepczak, N, McMillan, A and Batako, ADL (2018) A model and application of vibratory surface grinding. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 140 (10). ISSN 1087-1357
Bell, W F (1983) High-rate centreless grinding of ferrous components. Doctoral thesis, Liverpool John Moores University.
Bezombes, F (2004) Fibre Bragg grating temperature sensors for high-speed machining applications. Doctoral thesis, Liverpool John Moores University.
Black, S C E (1996) The effect of abrasive properties on the surface integrity of ground ferrous materials. Doctoral thesis, Liverpool John Moores University.
Botha, JDM, Shahrokhi, A and Rice, H (2017) An implementation of an aeroacoustic prediction model for broadband noise from a vertical axis wind turbine using a CFD informed methodology. Journal of Sound and Vibration, 410. pp. 389-415. ISSN 0022-460X
Brazier, J, Antrobus, M, Herbert, A, Callus, P, Khanal, P, Stebbings, G, Day, S, Heffernan, S, Kilduff, L, Bennett, M, Erskine, R, Raleigh, S, Collins, M, Pitsiladis, Y and Williams, A (2022) Gene Variants Previously Associated with Reduced Soft-Tissue Injury Risk: Part 2 - Polygenic Associations with Elite Status in Rugby. European Journal of Sport Science. ISSN 1536-7290
Brooks, M, Abdellatif, M and Alkhaddar, R (2021) Application of life cycle carbon assessment for a sustainable building design: a case study in the UK. International Journal of Green Energy. ISSN 1543-5075
Bury, A (2019) The failure of peer to peer learning to deliver a positive student experience in simulator based education. In: Liverpool John Moores University’s 18th Annual Teaching and Learning Conference, Wednesday 12th and Thursday 13th June 2019., 12- 13th June 2019, Liverpool, UK.
C
Carta, G, Colquitt, DJ, Movchan, AB, Movchan, N and Jones, IS (2019) One-way interfacial waves in a flexural plate with chiral double resonators. Philosophical Transactions A: Mathematical, Physical and Engineering Sciences, 378 (2162). ISSN 1364-503X
Carta, G, Jones, IS, Movchan, NV and Movchan, AB (2019) Wave Characterisation in a Dynamic Elastic Lattice: Lattice Flux and Circulation. Physical Mesomechanics, 22 (2). pp. 152-163. ISSN 1029-9599
Carta, G, Nieves, MJ, Jones, IS, Movchan, NV and Movchan, AB (2018) Elastic Chiral Waveguides with Gyro-Hinges. Quarterly Journal of Mechanics and Applied Mathematics, 71 (2). pp. 157-185. ISSN 0033-5614
Chen, X (1995) Strategy for the selection of grinding wheel dressing conditions. Doctoral thesis, Liverpool John Moores University.
Chen, X, Hu, Z, Wang, C and Liu, J (2015) A novel forming method for three-dimensional thin sheet metal. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture. pp. 1-5. ISSN 0954-4054
Chen, X, Li, L and Wu, Q Effects of Abrasive Grit Shape on Grinding Performance. In: IEEE xplore . (23rd International Conference on Automation & Computing, 7-8th September, 2017, Huddersfield, UK). (Submitted)
Chen, X, Opoz, TT and Oluwajobi, A (2017) Analysis of grinding surface creation by single grit approach. Journal of Manufacturing Science and Engineering, 139 (12). ISSN 1528-8935
Chen, X, Sufian, M and Yu, DL (2017) Investigating the Capability of Precision in Robotic Grinding. In: Proceedings of the 23rd International conference on Automation & Computing . (23rd International Conference on Automation & Computing, 7-8th September, 2017, Huddersfield, UK).
Chen, Y, Chen, X, Hu, Z and Duan, N (2023) Comprehensive influence of ultrasonic vibration–assisted technology on material removal mechanism under the excitation of regenerative vibration in precision grinding process. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768
Chen, Y, Chen, X, Xu, X and Yu, G (2018) Effect of Energy Consumption in Contact Zone on Machining Conditions Optimization in Precision Surface Grinding. Journal of Mechanical Engineering, 64.
Chen, Y, Jiang, C, Chen, X, Huang, G and Hu, Z (2023) Study on the dynamic influence of the distribution of cutting depth on the ground surface quality in a precision grinding process. Journal of Manufacturing Processes, 107. pp. 134-143. ISSN 1526-6125
Chong, F S (1985) Variation analysis of hybrid bearings. Doctoral thesis, Liverpool John Moores University.
Chukwuka, OJ, Ren, J, Wang, J and Paraskevadakis, D (2024) Managing risk in emergency supply chains–An empirical study. International Journal of Logistics Research and Applications. pp. 1-37. ISSN 1367-5567
Connor, A M (1996) The synthesis of hybrid mechanisms using genetic algorithms. Doctoral thesis, Liverpool John Moores University.
D
DAVIES, MJ, Taylor, Z, Ren, J, Leach, AG and Gibbons, P (2017) Crystallisation of Aspirin via Simulated Pulmonary Surfactant Monolayers and Lung-Specific Additives. Surface and Interface Analysis. ISSN 1096-9918
Dantsoho, AM (2015) RISK-BASED FRAMEWORK FOR SAFETY MANAGEMENT OF ONSHORE TANK FARM OPERATIONS. Doctoral thesis, Liverpool John Moores University.
Datta, S, Mahfouf, M, Zhang, Q, Chattopadhyay, PP and Sultana, N (2015) Imprecise knowledge based design and development of titanium alloys for prosthetic applications. Journal of the Mechanical Behavior of Biomedical Materials, 53. pp. 350-365. ISSN 1751-6161
Davies, MJ, Costley, M, Ren, J, Gibbons, P, Kondor, A and Naderi, M (2017) On drug-base incompatibilities during extrudate manufacture and fused deposition 3D printing. Journal of 3D Printing in Medicine, 1 (1). pp. 31-47. ISSN 2059-4755
Dithmer, P, Reinhardt, L and Kontovas, CA (2017) The Liner Shipping Routing and Scheduling Problem Under Environmental Considerations: The Case of Emission Control Areas. In: Computational Logistics, ICCL 2017 , 10572. pp. 336-350. (8th International Conference on Computational Logistics (ICCL), 18th - 20th September 2017, Southampton, ENGLAND).
Dong, M, Ma, H, Zhang, G, Chen, Y, Zhang, X and Cao, X (2017) A model for determining electromechanical response profile of ultrasonic transducers and ultrasonic transient echo. Shengxue Xuebao/Acta Acustica, 42 (4). pp. 403-410. ISSN 0371-0025
E
Ebbrell, S (2003) Process requirements for precision grinding. Doctoral thesis, Liverpool John Moores University.
Ender, J (2021) Design of Industrial Workplaces to relieve Workers when Interacting with Joint-Arm-Robots. Doctoral thesis, Liverpool John Moores University.
English, RG, Ashkanfar, A and Rothwell, G (2015) The effect of different assembly loads on taper junction fretting wear in total hip replacements. Tribology International, 95. pp. 199-210. ISSN 1879-2464
Eslami Majd, A, Tchuenbou-Magaia, F, Meless, AM, Adebayo, DS and Ekere, NN (2023) A Review on Cooling Systems for Portable Energy Storage Units. Energies, 16 (18).
Evans, SD, Brewer, C, Haigh, JD, Lake, M, Morton, JP and Close, GL (2015) The physical demands of Super League rugby: Experiences of a newly promoted franchise. European Journal of Sport Science. ISSN 1536-7290
Ezefili, V (2019) Development and Deployment of Involute Splines Cold Forming Process for Gear Manufacturing. Doctoral thesis, Liverpool John Moores University.
F
Fajar, M (2014) Conceptual Design and Simulation of An Inverted Pendulum Wheelchair. Masters thesis, Liverpool John Moores University.
Franks, DA (2018) An Investigation into the Application of Formal Decision Making Techniques to Design Alterations and Additions (As&As) for Vessels of the Royal Fleet Auxiliary (RFA). Doctoral thesis, Liverpool John Moores University.
G
Garau, M, Nieves, MJ and Jones, IS (2019) Alternating strain regimes for failure propagation in flexural systems. Quarterly Journal of Mechanics and Applied Mathematics. ISSN 0033-5614
Georgantzia, E, Gkantou, M, Kamaris, GS and Kansara, KD (2022) Design of aluminium alloy channel sections under minor axis bending. Thin-Walled Structures, 174. ISSN 0263-8231
Goodall, C (1990) A study of the throughfeed centreless grinding process with particular reference to the size accuracy. Doctoral thesis, Liverpool John Moores University.
Goodwin, J (1990) Optimal design of a high speed rotary braider. Doctoral thesis, Liverpool John Moores University.
Griffiths, D (1994) Development and decline of the British crosshead type marine propulsion diesel engine. Doctoral thesis, Liverpool John Moores University.
Grigoriev, SN, Vereschaka, AA, Fyodorov, SV, Sitnikov, NN and Batako, ADL (2016) Comparative analysis of cutting properties and nature of wear of carbide cutting tools with multi-layered nano-structured and gradient coatings produced by using of various deposition methods. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768
Gu, Y (2010) Biomechanical investigation of the human foot deformation under different landing conditions using finite element analysis. Doctoral thesis, Liverpool John Moores University.
Guo, J, Tang, C, Rothwell, G, Li, L, Wang, Y-C, Yang, Q and Ren, X (2019) Welding of High Entropy Alloys A Review. Entropy, 21 (4). ISSN 1099-4300
Gviniashvili, V (2003) Fluid application system optimisation for high speed grinding. Doctoral thesis, Liverpool John Moores University.
H
Ha, C, Nguyen, TT, Bui, T and Wang, R (2017) An online packing heuristic for the three-dimensional container loading problem in dynamic environments and the Physical Internet. Lecture Notes in Computer Science, 10200. pp. 140-155. ISSN 0302-9743
Ha, M-H, Yang, Z and Lam, JSL (2018) Port performance in container transport logistics: A multi-stakeholder perspective. Transport Policy, 73. pp. 25-40. ISSN 0967-070X
Hassan, S (2020) Onshore Cross Country Pipelines Risk Assessment and Decision Making Under Uncertainty. Doctoral thesis, Liverpool John Moores University.
He, K, Seddighi, M and He, S (2015) DNS study of a pipe flow following a step increase in flow rate. International Journal of Heat and Fluid Flow, 57. pp. 130-141. ISSN 0142-727X
He, S, He, K and Seddighi, M (2016) Laminarisation of flow at low Reynolds number due to streamwise body force. Journal of Fluid Mechanics, 809. pp. 31-37. ISSN 0022-1120
Hernandez-Nava, E, Smith, CJ, Derguti, F, Tammas-Williams, S, Leonard, F, Withers, PJ, Todd, I and Goodall, R (2016) The effect of defects on the mechanical response of Ti-6Al-4V cubic lattice structures fabricated by electron beam melting. Acta Materialia, 108. pp. 279-292. ISSN 1359-6454
Hernandez-Nava, E, Tammas-Williams, S, Smith, C, Leonard, F, Withers, PJ, Todd, I and Goodall, R (2017) X-ray Tomography Characterisation of Lattice Structures Processed by Selective Electron Beam Melting. Metals, 7 (8). ISSN 2075-4701
Herraez, M A (1996) An investigation of various computational techniques in optical fringe analysis. Doctoral thesis, Liverpool John Moores University.
I
Ibrahim, E (2020) An investigation into Vibratory Grinding of hard-to Machine Aerospace Materials. Doctoral thesis, Liverpool John Moores University.
Irving, M, Murphy, MF, Lilley, F, French, PW, Burton, DR, Dixon, S and Sharp, MC (2016) The use of abrasive polishing and laser processing for developing polyurethane surfaces for controlling fibroblast cell behaviour. Materials Science and Engineering C, 71. pp. 690-697. ISSN 1873-0191
Irving, MD (2017) Evaluating the use of laser processing and polishing techniques to generate micro-patterned surfaces for controlling fibroblast cell behaviour. Doctoral thesis, Liverpool John Moores University.
J
Jabar, S, Baghbani Barenji, A, Franciosa, P, Kotadia, HR and Ceglarek, D (2023) Effects of the adjustable ring-mode laser on intermetallic formation and mechanical properties of steel to aluminium laser welded lap joints. Materials and Design, 227. ISSN 0264-1275
Jackson, A (2008) An investigation of useful fluid flow in grinding. Doctoral thesis, Liverpool John Moores University.
Jackson, M J (1995) A study of vitreous-bonded abrasive materials. Doctoral thesis, Liverpool John Moores University.
Jamal, M and Morgan, MN (2017) Materials characterisation part II: tip geometry of the Vickers indenter for microindentation tests. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768
Jamal, M and Morgan, MN (2017) Materials characterization part I: contact area of the Berkovich indenter for nanoindentation tests. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768
Jamal, M, Morgan, MN and Peavoy, D (2017) A digital process optimization, process design and process informatics system for high-energy abrasive mass finishing. International Journal of Advanced Manufacturing Technology, 92. pp. 303-319. ISSN 0268-3768
Jara, M, Johnson, P, Flores, IJ and Gutiérrez, D (2023) Monitoring Peak Pollution Points of Water Resources with Autonomous Surface Vehicles using a PSO-based Informative Path Planner. In: Mobile Robots: Motion Control and Path Planning Studies in Computational Intelligence. Studies in Computational Intelligence, 1090 . Springer, pp. 93-125. ISBN 9783031265631
Jones, IS (2016) Dynamic interfacial trapping of flexural waves in structured plates. Proceedings of the Royal Society of London. Series A, Mathematical and physical sciences, 472 (2186). pp. 1-25. ISSN 0080-4630
Jones, M (2005) A novel concept of series connected multi-phase, multi-motor drive systems. Doctoral thesis, Liverpool John Moores University.
K
Kasaeyan, M (2015) A novel engineering framework for risk assessment of Mobile Offshore Drilling Units. Doctoral thesis, Liverpool John Moores University.
Kong, X (2008) Numerical and experimental investigation of mechanical strength of spot welded joints. Doctoral thesis, Liverpool John Moores University.
Kotadia, HR, Franciosa, P, Jabar, S and Ceglarek, D (2022) Remote laser welding of Zn coated IF steel and 1050 aluminium alloy: processing, microstructure and mechanical properties. Journal of Materials Research and Technology, 19. pp. 449-465. ISSN 2238-7854
L
Lei, M, Zhang, X, Yang, W, Wan, J, Dong, Z, Zhang, C and Zhang, G (2024) High-Precision Drilling by Anchor-Drilling Robot Based on Hybrid Visual Servo Control in Coal Mine. MDPI Mathematics, 12 (13).
Levi, E, Che, HS, Dordevic, O and Abdel-Khalik, AS (2017) Parameter Estimation of Asymmetrical Six-phase Induction Machines using Modified Standard Tests. IEEE Transactions on Industrial Electronics, 64 (8). pp. 6075-6085. ISSN 0278-0046
Levi, E, Duran, MJ, Gonzales-Prieto, I, Barrero, F, Zarri, L and Mengoni, M (2017) A Simple Braking Method for Six-phase Induction Motor Drives with Unidirectional Power Flow in the Base-speed Region. IEEE Transactions on Industrial Electronics. ISSN 0278-0046
Li, S (2018) Experimental Testing and Numerical Investigation of Materials with Embedded Systems during Indentation and Complex Loading Conditions. Doctoral thesis, Liverpool John Moores University.
Li, S, Al-Badani, K, Gu, Y, Lake, MJ, Li, B, Rothwell, G and Ren, X (2017) The Effects of Poisson's Ratio on the Indentation Behaviour of Materials with Embedded System in an Elastic Matrix. physica status solidi (b). ISSN 0370-1972
Li, S, Zhang, Y, Gu, Y and Ren, J (2017) Stress distribution of metatarsals during forefoot strike versus rearfoot strike: A finite element study. Computers in Biology and Medicine, 91. pp. 38-46. ISSN 0010-4825
Li, Z, Yuan, S, Ma, J, Shen, J and Batako, ADL (2021) Study on the surface formation mechanism in scratching test with different ultrasonic vibration forms. Journal of Materials Processing Technology. ISSN 0924-0136
Liao, YW (1998) Self-excitation and constant flux operation of induction generators in stand-alone applications. Doctoral thesis, Liverpool John Moores University.
Lin, Z (1999) An investigation of temperature in form grinding. Doctoral thesis, Liverpool John Moores University.
Liu, S, Gao, Y, Wang, Z, Shi, Z, Zhou, Y, Ren, X and Yang, Q (2017) Refinement effect of TiC on ferrite by molecular statics/dynamics simulations and first-principles calculations. Journal of Alloys and Compounds, 731. pp. 822-830. ISSN 0925-8388
Liu, Y (2018) FAULT DETECTION AND ISOLATION FOR WIND TURBINE DYNAMIC SYSTEMS. Doctoral thesis, Liverpool John Moores University.
Lu, L, Jump, M and Padfield, GD (2017) Development of a Generic Time-to-Contact Pilot Guidance Model. Journal of Guidance, Control, and Dynamics. ISSN 0731-5090
M
Mao, Q, Ma, H, Zhang, X and Zhang, G (2018) An Improved Skewness Decision Tree SVM Algorithm for the Classification of Steel Cord Conveyor Belt Defects. Applied Sciences, 8 (12). ISSN 2076-3417
Mao, Q, Wang, Y, Zhang, X, Zhao, X, Zhang, G and Mushayi, K (2022) Clarity method of fog and dust image in fully mechanized mining face. Machine Vision and Applications, 33 (2). ISSN 0932-8092
Mason, J S (1972) Pressure drop and flow characteristics for the pneumatic transport of fine particles through curved and straight circular pipes. Doctoral thesis, Liverpool John Moores University.
Mathur, A, Seddighi, M and He, S (2018) Transition of Transient Channel Flow with High Reynolds Number Ratios. Entropy, 20 (5). ISSN 1099-4300
Matthews, C, Dickinson, PB and Shenton, AT Chassis Dynamometer Torque Control System Design by Direct Inverse Compensation. In: 6th Biennial UKACC International Control Conference (ICC'06), 30th August 2006 - 1st September 2006, Glasgow, UK.
McLachlan, S, Schafer, B, Dube, K, Kyrimi, E and Fenton, N (2022) Tempting the Fate of the Furious: Cybersecurity and autonomous cars. International Review of Law, Computers & Technology. ISSN 1360-0869
Messina, M and Njuguna, J (2012) Potential of silicon nanowires structures as nanoscale piezoresistors in mechanical sensors. IOP Conference Series: Materials Science and Engineering, 40 (1). ISSN 1757-899X
Messina, M, Njuguna, J and Palas, C (2018) Mechanical Structural Design of a MEMS-Based Piezoresistive Accelerometer for Head Injuries Monitoring: A Computational Analysis by Increments of the Sensor Mass Moment of Inertia. Sensors, 18 (1). ISSN 1424-8220
Miao, W, Liu, Q, Zhang, Q, Xu, Z, Li, C, Yue, M, Zhang, W and Ye, Z (2022) Recommendation for strut designs of vertical axis wind turbines: Effects of strut profiles and connecting configurations on the aerodynamic performance. Energy Conversion and Management, 276. ISSN 0196-8904
Mirza, WIIWI, Rani, MNA, Yunus, MA, Stancioiu, D and Shripathi, V (2021) Estimating Rotational Frequency Response Function Using Mode Expansion and Frequency Response Function Synthesis Method. International Journal of Automotive and Mechanical Engineering, 18 (2). pp. 8738-8750. ISSN 2229-8649
Misseroni, D, Colquitt, DJ, Movchan, AB, Movchan, NV and Jones, IS (2016) Cymatics for the cloaking of flexural vibrations in a structured plate. SCIENTIFIC REPORTS, 6. ISSN 2045-2322
Moghadam, M K (2006) The impact of automation on the efficiency and cost effectiveness of the quayside and container yard cranes and the selection decision for the yard operating systems. Doctoral thesis, Liverpool John Moores University.
Mohammed, T (2017) Evaluating the effects of acoustic stimulation on fibroblast cell migration and muscle fibre formation. Doctoral thesis, Liverpool John Moores University.
Moruzzi, JJ (2016) Design of a Modern, Low Cost, Expandable, Open Architecture Grinding Machine Control System. Masters thesis, Liverpool John Moores University.
N
Naylor, A and Hackney, P (2013) A Review of Wood Machining Literature with a Special Focus on Sawing. BioResources, 8 (2). pp. 3122-3125.
Naylor, A, Hackney, P, Perera, N and Clahr, E (2012) A predictive model for the cutting force in wood machining developed using mechanical properties. BioResources, 7 (3). pp. 2883-2894. ISSN 1930-2126
Norbury, AAW (2017) Parametric Studies Based Mechanical and Thermal Modelling of Spot Welded Joints. Doctoral thesis, Liverpool John Moores University.
O
Oluwajobi, AO and Chen, X (2017) On Time Step in the Molecular Dynamics (MD) Simulation of Nanomachining. Solid State Phenomena, 261. pp. 108-114. ISSN 1012-0394
Oon, CS, Al-Shamma'a, A, Kazi, SN, Chew, BT, Badarudin, A and Sadeghinezhad, E (2014) Simulation of heat transfer to separation Air flow in a concentric pipe. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 57. pp. 48-52. ISSN 0735-1933
Opoz, TT and Chen, X (2014) Experimental study on single grit grinding of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. ISSN 2041-2975
P
Pazhani, A, Venkatraman, M, Anthony Xavior, M, Moganraj, A, Batako, A, Paulsamy, J, Jayaseelan, J, Anbalagan, A and Shanthi Bavan, J (2023) Synthesis and characterisation of graphene-reinforced AA 2014 MMC using squeeze casting method for lightweight aerospace structural applications. Materials & Design, 230. ISSN 0264-1275
Pontes, P, Gonçalves, I, Andredaki, M, Georgoulas, A, Moreira, ALN and Moita, AS (2022) Fluid flow and heat transfer in microchannel devices for cooling applications: Experimental and numerical approaches. Applied Thermal Engineering, 218. ISSN 1359-4311
Q
Qi, H (1995) A contact length model for grinding wheel-workpiece contact. Doctoral thesis, Liverpool John Moores University.
Qiu, Y, Wang, H, Gebhardt, S, Bolhovitins, A, Demore, CEM, Schoenecker, A and Cochran, S (2015) Screen-printed ultrasonic 2-D matrix array transducers for microparticle manipulation. Ultrasonics, 62. pp. 136-146. ISSN 0041-624X
Qiu, Z, Qiu, Y, Demore, CEM and Cochran, S (2016) Implementation of a PMN-PT piezocrystal-based focused array with geodesic faceted structure. Ultrasonics, 69. pp. 137-143. ISSN 0041-624X
R
Rajarathinam, K, Gomm, JB, Yu, DL and Abdelhadi, AS (2017) An improved search space resizing method for model identification by standard genetic algorithm. Systems Science and Control Engineering, 5 (1). pp. 117-128. ISSN 2164-2583
Rasani, MR, Ariffin, AK, Bashir, M and Wang, J (2019) Effect of location in a cylinder wake on dynamics of a flexible energy harvesting plate. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 55 (2). pp. 189-198. ISSN 2289-7879
Ren, XJ, Liu, S, Zhang, J, Wang, Z, Shi, Z, Zhou, Y and Yang, Q (2017) Refinement and homogenization of M7C3 carbide in hypereutectic Fe-Cr-C coating by Y2O3 and TiC. Materials Characterization, 132. pp. 41-45. ISSN 1044-5803
Rothwell, G (2003) Fracture toughness determination using constraint enhanced sub-sized specimens. Doctoral thesis, Liverpool John Moores University.
Rowe, WB (2020) Conical hydrostatic journal bearings for high speeds. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. ISSN 1350-6501
S
Sakaris, C, Yang, Y, Bashir, M, Michailides, C, Wang, J, Sakellariou, JS and Li, C (2021) Structural health monitoring of tendons in a multibody floating offshore wind turbine under varying environmental and operating conditions. Renewable Energy. ISSN 0960-1481
Sattar, S, Alaiwi, Y, Radhi, NS, Al-Khafaji, Z, Al-Hashimi, O, Alzahrani, H and Yaseen, ZM (2023) Corrosion reduction in steam turbine blades using nano-composite coating. Journal of King Saud University - Science, 35 (8). ISSN 1018-3647
Seddighi, M (2017) Temporal acceleration of a turbulent channel flow. Journal of Fluid Mechanics, 835. pp. 471-490. ISSN 0022-1120
Shahrokhi, A, Berthaut-Gerentes, J, Ma, L, Ingham, D and Pourkashanian, M (2023) Large Eddy Simulation Inflow Generation Using Reduced Length Scales for Flows Past Low-Rise Buildings. Sustainability, 15 (17). p. 12786. ISSN 2071-1050
Shubbar, AAF, Al-Shaer, A, Alkizwini, RS, Hashim, KS, Hawesah, HA and Sadique, MM (2019) Investigating the influence of cement replacement by high volume of GGBS and PFA on the mechanical performance of cement mortar. In: IOP Conference Series: Materials Science and Engineering , 584. 012022. (the International Conference on Civil and Environmental Engineering Technologies (ICCEET), 23 April 2019 - 24 April 2019, University of Kufa, Iraq).
Sievert, L, Stancioiu, D and Matthews, C (2021) Active Vibration Control of a Small-Scale Flexible Structure Subject to Moving-Loads and Experimental Validation. Journal of Vibration and Acoustics, 143 (6). ISSN 1048-9002
Simandjuntak, S, Bausch, N, Farrar, A, Ahuir-Torres, JI, Thomas, B and Muna, J (2021) iWindCr field trial and electrochemical analysis for corrosion detection and monitoring offshore wind turbine's MP-TP steel components. JOURNAL OF MARINE ENGINEERING AND TECHNOLOGY, 21 (6). pp. 311-323. ISSN 2046-4177
Slunjski, M (2021) Control of a nine-phase symmetrical PMSM with reduced rare earth material. Doctoral thesis, Liverpool John Moores University.
Smith, CJ, Derguti, F, Nava, EH, Thomas, M, Tammas-Williams, S, Culizia, S, Fraser, D and Todd, I (2015) Dimensional accuracy of Electron Beam Melting (EBM) additive manufacture with regard to weight optimized truss structures. Journal of Materials Processing Technology, 229. pp. 128-138. ISSN 0924-0136
Smith, CJ, Tammas-Williams, S, Hernandez-Nava, E and Todd, I (2017) Tailoring the thermal conductivity of the powder bed in Electron Beam Melting (EBM) Additive Manufacturing. Scientific Reports, 7. ISSN 2045-2322
Sokola, M (1998) Vector control of induction machines using improved machine models. Doctoral thesis, Liverpool John Moores University.
Strohle, M, Sadique, MM, Dulaimi, AF and Kadhim, MA (2022) Prospect and barrier of 3D concrete: a systematic review. Innovative Infrastructure Solutions, 8 (1). ISSN 2364-4176
Su, X (2014) Indentation Curve Prediction and Inverse Material Parameters Identification of Hyperfoam Materials Based on Intelligent ANN Method. Doctoral thesis, Liverpool John Moores University.
Sun, K, Xu, Z, Li, S, Jin, J, Wang, P, Yue, M and Li, C (2023) Dynamic response analysis of floating wind turbine platform in local fatigue of mooring. Renewable Energy, 204. pp. 733-749. ISSN 0960-1481
T
Tabrizian, A, Tatar, M, Masdari, M, Eivazi, H and Seddighi, M (2020) An experimental study on boundary layer transition detection over a pitching supercritical airfoil using hot-film sensors. International Journal of Heat and Fluid Flow, 86. ISSN 0142-727X
Tammas-Williams, S and Todd, I (2016) Design for additive manufacturing with site-specific properties in metals and alloys. Scripta Materialia, 135. pp. 105-110. ISSN 1359-6462
Tammas-Williams, S, Withers, PJ, Todd, I and Prangnell, PB (2017) The Influence of Porosity on Fatigue Crack Initiation in Additively Manufactured Titanium Components. Scientific Reports, 7. ISSN 2045-2322
Tammas-Williams, S, Withers, RI, Todd, I and Prangnell, PB (2016) Porosity regrowth during heat treatment of hot isostatically pressed additively manufactured titanium components. Scripta Materialia, 122. pp. 72-76. ISSN 1359-6462
Tipparthi, VK (2017) Design and Development of a Dual Flow System for Fluid Delivery in Grinding Application. Doctoral thesis, Liverpool John Moores University.
Toh, SM, Ashkanfar, A, English, R and Rothwell, G (2021) Computational method for bearing surface wear prediction in total hip replacements. Journal of the Mechanical Behavior of Biomedical Materials, 119. ISSN 1751-6161
Tokuz, L C (1992) Hybrid machine modelling and control. Doctoral thesis, Liverpool John Moores University.
Tridimas, YD (1981) Development and application of laser doppler anemometer instrumentation for the study of gas-solid suspension flows. Doctoral thesis, Liverpool John Moores University.
Tsiakoumis, V I (2011) An investigation into vibration assisted machining : application to surface grinding processes. Doctoral thesis, Liverpool John Moores University.
U
Usman, AY (2017) A Resilience Modelling Approach for Oil Terminal Operations Under High Uncertainties. Doctoral thesis, Liverpool John Moores University.
Usman, M (2021) Performance assessment modelling of a low-speed two-stroke marine engine. Doctoral thesis, Liverpool John Moores University.
V
Vereschaka, A, Batako, ADL, Vereschaka, A and Dodonov, A (2017) Development of modifying compounds for multilayer nano-structured coatings for cutting tools. International Journal of Nanotechnology, 14. pp. 574-583. ISSN 1475-7435
Vereschaka, A, Migranov, M, Oganyan, G, Sotova, CS and Batako, ADL (2017) Application of carbide cutting tools with nano-structured multilayer composite coatings for turning austenitic steels, type 16Cr-10NI. Mechanics and Industry, 18 (7). ISSN 2257-7777
Vereschaka, AA, Grigoriev, S, Sitnikov, NN, Bublikov, JI and Batako, ADL (2018) Effect produced by thickness of nanolayers of multilayer composite wear-resistant coating on tool life of metal-cutting tool in turning of steel AISI 321. In: Procedia CIRP , 77. pp. 549-552. (8th CIRP Conference on High Performance Cutting (HPC 2018), 25-27 June 2018, Budapest, Hungary).
Vereschaka, AA, Grigoriev, SN, Sitnikov, NN and Batako, ADL (2017) Delamination and longitudinal cracking in multi-layered composite nanostructured coatings and their influence on cutting tool life. Wear, 390-39. pp. 209-219. ISSN 0043-1648
Vereschaka, AA, Grigoriev, SN, Sitnikov, NN, Oganyan, GV and Batako, ADL (2017) Working efficiency of cutting tools with multilayer nano-structured Ti-TiCN-(Ti,Al)CN and Ti-TiCN-(Ti,Al,Cr)CN coatings: Analysis of cutting properties, wear mechanism and diffusion processes. Surface and Coatings Technology, 332. pp. 198-213. ISSN 0257-8972
Vereschaka, AA, Vereschaka, AS, Batako, ADL, Hojaev, OK and Mokritskii, BY (2016) Development and research of nanostructured multilayer composite coatings for tungsten-free carbides with extended area of technological applications. International Journal of Advanced Manufacturing Technology. pp. 1-9. ISSN 0268-3768
Vereschaka, AA, Vereschaka, AS, Batako, ADL, Mokritskii, BJ, Aksenenko, AY and Sitnikov, NN (2017) Improvement of structure and quality of nanoscale multilayered composite coatings, deposited by filtered cathodic vacuum arc deposition method. Nanomaterials and Nanotechnology, 7. ISSN 1847-9804)
Vereshchaka, AA, Sotova, ES, Batako, ADL, Sedykh, MI and Vereshchaka, AS (2014) A study of the cutting properties and wear mechanism of ceramic edge tools with nanostructure multilayer composite coatings. Journal of Friction and Wear, 35 (6). pp. 483-488. ISSN 1068-3666
Vernon, G W (1988) Motion design, control and implementation in robot manipulators. Doctoral thesis, Liverpool John Moores University.
Vontas, K, Andredaki, M, Georgoulas, A, Nikas, K and Marengo, M (2017) Numerical Investigation of Droplet Impact on Smooth Surfaces with Different Wettability Characteristics: Implementation of a dynamic contact angle treatment in OpenFOAM. In: Proceedings of ILASS-Europe 2017 . pp. 58-65. (ILASS-Europe 2017, 28th Conference on Liquid Atomization and Spray Systems, Valencia, Spain).
Vu, VT, Bui, TL and Nguyen, TT (2017) A modified dual-population approach for solving multi-objective problems. In: 21st Asia Pacific Symposium on Intelligent and Evolutionary Systems (IES 2017) . (21st Asia Pacific Symposium on Intelligent and Evolutionary Systems (IES), 15th - 17th November 2017, Hanoi, Vietnam).
W
Walker, DL, Ahuir-Torres, JI, Akar, Y, Bingham, PA, Chen, X, Darowski, M, Fähnle, O, Gambron, P, Jackson, FF, Li, H, Mason, L, Mishra, R, Shahjalal, A and Yu, G (2023) Bridging the Divide Between Iterative Optical Polishing and Automation. Nanomanufacturing and Metrology, 6 (1).
Wang, P, Liu, Q, Li, C, Miao, W, Yue, M and Xu, Z (2022) Investigation of the aerodynamic characteristics of horizontal axis wind turbine using an active flow control method via boundary layer suction. Renewable Energy, 198. pp. 1032-1048. ISSN 0960-1481
Wei, J, Hou, X, Xu, G, Zhang, G and Fan, H (2021) Modeling and machining of integral impeller based on NURBS curve. International Journal of Advanced Manufacturing Technology. ISSN 0268-3768
Wu, H (2009) Investigation of Fluid Flow in Grinding using LDA Techniques and CFD Simulation. Doctoral thesis, Liverpool John Moores University.
X
Xie, X (1997) Absolute distance contouring and a phase unwrapping algorithm for phase maps with discontinuities. Doctoral thesis, Liverpool John Moores University.
Xu, Z, Mei, X, Wang, X, Yue, M, Jin, J, Yang, Y and Li, C (2022) Fault diagnosis of wind turbine bearing using a multi-scale convolutional neural network with bidirectional long short term memory and weighted majority voting for multi-sensors. Renewable Energy, 182. pp. 615-626. ISSN 0960-1481
Y
Yang, W, Zhang, X, Ma, H and Zhang, G (2020) Laser beams-based localization methods for Boom-type roadheader using underground camera non-uniform blur model. IEEE Access. ISSN 2169-3536
Yang, X, Gibbons, GJ, Tanner, DA, Li, Z, Wilson, P, Williams, MA and Kotadia, HR (2023) Scan strategy induced microstructure and consolidation variation in the laser-powder bed fusion (L-PBF) additive manufacturing of low alloy 20MnCr5 steel. Materials and Design, 232. ISSN 0264-1275
Yang, Y, Bashir, M, Li, C, Michailides, C and Wang, J (2020) Mitigation of coupled wind-wave-earthquake responses of a 10 MW fixed-bottom offshore wind turbine. Renewable Energy, 157. pp. 1171-1184. ISSN 1879-0682
Yang, Y, Bashir, M, Wang, J, Yu, J and Chun, L (2020) Performance evaluation of an integrated floating energy system based on coupled analysis. Energy Conversion and Management, Volume. ISSN 0196-8904
Z
Zhang, L and Rowe, WB (2019) Study of Convective Heat Transfer in Grinding Applied to Tool Carbide. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 142 (2). ISSN 1087-1357
Zhang, W, Zou, Z, Wang, J and Du, L (2020) Multi-ship following operation in ice-covered waters with consideration of inter-ship communication. Ocean Engineering, 210. ISSN 0029-8018
Zhao, C, Xing, X, Guo, J, Shi, Z, Zhou, Y, Ren, XJ and Yang, Q (2019) Microstructure and wear resistance of (Nb,Ti)C carbide reinforced Fe matrix coating with different Ti contents and interfacial properties of (Nb,Ti)C/α-Fe. Applied Surface Science, 494. pp. 600-609. ISSN 0169-4332
Zhao, C, Zhou, Y, Xing, X, Ren, X and Yang, Q (2018) Heterogeneous nuclei effect of MgAl2O4 on NbC in Fe matrix MMC coating. Applied Surface Science, 469. pp. 713-719. ISSN 0169-4332
Zhao, H (2015) Experimental and Numerical Modelling of Gasket Materials and Property Correlation. Doctoral thesis, Liverpool John Moores University.
Zhen, L, Yuan, S, Song, H and Batako, ADL (2018) A cutting force model based on kinematics analysis for C/SiC in rotary ultrasonic face machining. International Journal of Advanced Manufacturing Technology, 97. pp. 1223-1239. ISSN 0268-3768
Zubkov, N, Poptsov, V, Vasiliev, S and Batako, ADL (2018) Steel Case Hardening Using Deformational cutting. Journal of Manufacturing Science and Engineering, 140 (6). ISSN 1528-8935