Ali, SB, Kamaris, GS, Gkantou, M and Huang, Y (2024) Comparative Study of Life-Cycle Environmental and Cost Performance of Aluminium Alloy–Concrete Composite Columns. Sustainability, 16 (21).

Jemaa, Y, Yeboah, D and Gkantou, M (2024) Flexural performance of glulam timber beams with glued-in BFRP rods connections. Construction and Building Materials, 443. ISSN 0950-0618

Gkantou, M, Tziavos, NI, Dirar, S, Theofanous, M, Ukpedor, OP and Foster, A (2024) Assessment of design models for aluminium alloy CHS beam-columns with stocky cross-sections. Structures, 65.

Wei, X, Zhou, H, Kamaris, GS, Gkantou, M, Yun, F, Zuo, X, Guo, X and Ali, SB (2024) Cyclic behaviour of welded stainless steel beam-to-column connections: Experimental and numerical study. Journal of Constructional Steel Research, 218. ISSN 0143-974X

Ran, H, Ma, J, Chen, X, Sun, Y, Gkantou, M and McCrum, D (2024) Local Stability of Laser-Welded Stainless-Steel T-Section Stub Columns. Journal of Structural Engineering, 150 (7). ISSN 0733-9445

Bock, M, Gkantou, M, Theofanous, M, Afshan, S and Yuan, H (2023) Ultimate behaviour of hybrid stainless steel cross-sections. Journal of Constructional Steel Research, 210. ISSN 0143-974X

Gkantou, M, Georgantzia, E, Kadhim, A, Kamaris, GS and Sadique, M (2023) Geopolymer concrete-filled aluminium alloy tubular cross-sections. Structures, 51. pp. 528-543. ISSN 2352-0124

Bin Ali, S, Kamaris, GS and Gkantou, M (2022) Flexural buckling behaviour of concrete-filled double skin aluminium alloy columns. Engineering Structures, 275 (Part B). ISSN 0141-0296

Chandrasekar, R, Gkantou, M, Nikitas, G, Hashim, KS, Pradeep, HR and Ahuja, A (2022) Integration of 3D Concrete Printing in the Construction Industry: A Short Review. In: Current Trends in Geotechnical Engineering and Construction . pp. 445-452. (International Conference on Geotechnical Engineering, Baghdad, Iraq).

Georgantzia, E, Gkantou, M and Kamaris, GS (2022) Aluminium alloy channel columns: Testing, numerical modelling and design. Thin-Walled Structures, 182 (A). ISSN 0263-8231

Bin Ali, S, Kamaris, GS and Gkantou, M (2022) Flexural behaviour of concrete-filled double skin aluminium alloy tubes. Engineering Structures, 272. ISSN 0141-0296

Georgantzia, E, Ali, SB, Gkantou, M, Kamaris, GS, Kot, P and Hashim, K (2022) Numerical modelling of concrete-filled aluminium alloy 6082-T6 columns under axial compression. Journal of Physics: Conference Series, 2198 (1). 012045-012045. ISSN 1742-6588

Georgantzia, E, Gkantou, M, Kamaris, GS and Kansara, KD (2022) Ultimate response and plastic design of aluminium alloy continuous beams. Structures, 39. pp. 175-193. ISSN 2352-0124

Georgantzia, E, Gkantou, M, Kamaris, GS and Kansara, KD (2022) Design of aluminium alloy channel sections under minor axis bending. Thin-Walled Structures, 174. ISSN 0263-8231

Ali, SB, Kamaris, GS, Gkantou, M and Kansara, KD (2022) Concrete-filled and bare 6082-T6 aluminium alloy tubes under in-plane bending: Experiments, finite element analysis and design recommendations. Thin-Walled Structures, 172. ISSN 0263-8231

Aldeka, AB, Tziavos, NI, Gkantou, M, Dirar, S and Chan, AHC (2021) Seismic design of non-structural components mounted on irregular reinforced concrete buildings. Journal of Building Engineering, 46. ISSN 2352-7102

Georgantzia, E, Gkantou, M and Kamaris, GS (2021) Aluminium alloys as structural material: A review of research. Engineering Structures, 227. ISSN 0141-0296

Georgantzia, E, Gkantou, M and Kamaris, GS (2021) Numerical Modelling and Design of Aluminium Alloy Angles under Uniform Compression. CivilEng, 2 (3). pp. 632-651. ISSN 2673-4109

Georgantzia, E, Bin Ali, S, Gkantou, M, Kamaris, GS, Kansara, KD and Atherton, W (2021) Flexural buckling performance of concrete-filled aluminium alloy tubular columns. Engineering Structures, 242 (1). ISSN 0141-0296

Yeboah, D and Gkantou, M (2021) Investigation of flexural behaviour of structural timber beams strengthened with NSM basalt and glass FRP bars. Structures, 33. pp. 390-409. ISSN 2352-0124

Georgantzia, E and Gkantou, M (2021) Flexural Buckling of Concrete-Filled Aluminium Alloy CHS Columns: Numerical Modelling and Design. In: Lecture Notes in Civil Engineering , 143. pp. 697-707. (3rd International Conference on Trends and Recent Advances in Civil Engineering, Noida, India).

Kadhum, M, Mahdi, Z, Funfakh, Y, Mohammed, Z, Abdulraheem, M and Gkantou, M (2021) Experimental investigation on the post-fire performance of reactive powder concrete columns. Przegląd Naukowy Inżynieria i Kształtowanie Środowiska, 30 (2). pp. 315-326. ISSN 1732-9353

Kot, P, Muradov, M, Gkantou, M, Kamaris, GS, Hashim, KS and Yeboah, D (2021) Recent Advancements in Non-Destructive Testing Techniques for Structural Health Monitoring. Applied Sciences, 11 (6). ISSN 2076-3417

Omer, G, Kot, P, Atherton, W, Muradov, M, Gkantou, M, Shaw, A, Riley, ML, Hashim, KS and Al-Shamma'a, A (2021) A Non-Destructive Electromagnetic Sensing Technique to Determine Chloride Level in Maritime Concrete. Karbala International Journal of Modern Science, 7 (1). pp. 61-71. ISSN 2405-609X

Abdulredha, M, Muhsin, AA, Al-Janabi, A, Alajm, BN, Gkantou, M, Amoako-Attah, J, Al-Jumeily, D, Mustafina, J and AlKhayyat, A (2021) Using SF and CKD as cement replacement materials for producing cement mortar. In: IOP Conference Series: Materials Science and Engineering , 1058 (1). 012007-012007. (1st Conference on Science and Technology for Early Career Researchers and Postgraduate Students (STEPS 2020), 20-22 December 2020, Erbil, Iraq).

Cotterill, J, Ethaib, S, Hashim, KS, Alqashou, F, Al-Hayawi, AY, Abdellatif, M, Gkantou, M and Shubbar, AAF (2021) Evaluation of the Use of Lignocellusic Biomass in Thermal Insulation for Green Building. IOP Conference Series: Materials Science and Engineering, 1058 (1). ISSN 1757-8981

Almatrafi, M, Theofanous, M, Dirar, S and Gkantou, M (2021) Structural response of cold-formed lipped Z purlins – Part 1: Experimental investigation. Thin-Walled Structures, 161. ISSN 0263-8231

Gkantou, M, Bock, M and Theofanous, M (2021) Design of stainless steel cross-sections with outstand elements under stress gradients. Journal of Constructional Steel Research, 179. ISSN 0143-974X

Ali, SB, Georgantzia, E, Kamaris, GS, Gkantou, M and Kot, P (2020) Experimental study of square and rectangular hollow section aluminium alloy columns. In: Journal of Physics: Conference Series , 2198 (1). 012046-012046. (15th Global Congress on Manufacturing and Management (GCMM), 25 November 2020 - 27 November 2020, Liverpool).

Tziavos, NI, Gkantou, M, Theofanous, M, Dirar, S and Baniotopoulos, C (2020) Behaviour of grout-filled double-skin tubular steel stub-columns: Numerical modelling and design considerations. Structures, 27. pp. 1623-1636. ISSN 2352-0124

Gkantou, M, Rebelo, C and Baniotopoulos, C (2020) Life Cycle Assessment of Tall Onshore Hybrid Steel Wind Turbine Towers. Energies, 13 (15). ISSN 1996-1073

Alenezi, A, Hasan, H, Hashim, KS, Amoako-Attah, J, Gkantou, M, Muradov, M, Kot, P and Abdulhadi, B (2020) Zeolite-assisted electrocoagulation for remediation of phosphate from calcium-phosphate solution. In: IOP Conference Series: Materials Science and Engineering (888). (2nd International Conference on Civil and Environmental Engineering Technologies (ICCEET 2020), 10 June 2020 - 11 June 2020, Najaf, Iraq).

Hashim, KS, Ali, S, AlRifaie, J, Kot, P, Shaw, A, Al Khaddar, RM, Idowu, IO and Gkantou, M (2020) Escherichia coli inactivation using a hybrid ultrasonic–electrocoagulation reactor. Chemosphere, 247. ISSN 1879-1298

Gkantou, M, Muradov, M, Kamaris, GS, Hashim, KS, Atherton, W and Kot, P (2019) Novel Electromagnetic Sensors Embedded in Reinforced Concrete Beams for Crack Detection. Sensors, 19 (23). ISSN 1424-8220

Gkantou, M, Theofanous, M and Baniotopoulos, C (2019) A NUMERICAL STUDY OF PRESTRESSED HIGH STRENGTH STEEL TUBULAR MEMBERS. Frontiers of Structural and Civil Engineering. ISSN 2095-2430

Teng, KH, Kot, P, Muradov, M, Shaw, A, Hashim, KS, Gkantou, M and Al-Shamma'a, A (2019) Embedded Smart Antenna for Nondestructive Testing and Evaluation (NDT&E) of Moisture Content and Deterioration in Concrete. Sensors, 19 (3). ISSN 1424-8220

Afshan, S, Theofanous, M, Wang, J, Gkantou, M and Gardner, L (2019) Testing, numerical simulation and design of prestressed high strength steel arched trusses. Engineering Structures, 183. pp. 510-522. ISSN 0141-0296

Gkantou, M, Theofanous, M and Baniotopoulos, P (2018) Plastic design of hot-finished high strength steel continuous beams. Thin-Walled Structures, 133. pp. 85-95. ISSN 0263-8231

Martinez-Vazquez, P, Gkantou, M and Baniotopoulos, C (2018) Strength and ductility demands on wind turbine towers due to earthquake and wind load. Proceedings of the Institution of Civil Engineers - Structures and Buildings. pp. 1-8. ISSN 0965-0911

Gkantou, M, Kokosis, G, Theofanous, M and Dirar, S (2018) Plastic design of stainless steel continuous beams. Journal of Constructional Steel Research. ISSN 0143-974X

Gkantou, M, Theofanous, M, Wang, J, Baniotopoulos, C and Gardner, L (2017) Behaviour and design of high-strength steel cross-sections under combined loading. Proceedings of the Institution of Civil Engineers - Structures and Buildings, 170 (11). pp. 841-854. ISSN 0965-0911

Gkantou, M, Theofanous, M, Antoniou, N and Baniotopoulos, C (2017) Compressive behaviour of high-strength steel cross-sections. Proceedings of the Institution of Civil Engineers - Structures and Buildings, 170 (11). pp. 813-824. ISSN 0965-0911

Gkantou, M, Martinez-Vazquez, P and Baniotopoulos, C (2017) On the structural response of a tall hybrid onshore wind turbine tower. In: Procedia Engineering , 199. pp. 3200-3205. (10th International Conference on Structural Dynamics (EURODYN), 10 September 2017 - 13 September 2017, Sapienza Univ Rome, Fac Civil & Ind Engn, Rome, ITALY).

Martinez-Vazquez, P, Gkantou, M and Baniotopoulos, C (2017) Strength demands of tall wind turbines subject to earthquakes and wind load. In: Procedia Engineering , 199. pp. 3212-3217. (10th International Conference on Structural Dynamics (EURODYN), 10 September 2017 - 13 September 2017, Sapienza Univ Rome, Fac Civil & Ind Engn, Rome, ITALY).

Wang, J, Afshan, S, Gkantou, M, Theofanous, M, Baniotopoulos, C and Gardner, L (2016) Flexural behaviour of hot-finished high strength steel square and rectangular hollow sections. Journal of Constructional Steel Research, 121. pp. 97-109. ISSN 0143-974X