Article

Ali, SB, Kamaris, GS, Gkantou, M and Huang, Y (2024) Comparative Study of Life-Cycle Environmental and Cost Performance of Aluminium Alloy–Concrete Composite Columns. Sustainability, 16 (21).

Marino, E, Gkantou, M, Malekjafarian, A, Bali, S, Baniotopoulos, C, van Beeck, J, Borg, RP, Bruschi, N, Cardiff, P, Chatzi, E, Čudina, I, Dinu, F, Efthymiou, E, Ferri, G, Gervásio, H, Heng, J, Jiang, Z, Lenci, S, Lukačević, I, Manuel, L et al, Meyer, A, Méndez-Morales, M, Osmanović, A, Pakrashi, V, Pandit, A, Rega, G, Skejić, D, Tesch, L, Ungureanu, V, Uzunović, T and Verma, AS (2024) Offshore renewable energies: A review towards Floating Modular Energy Islands—Monitoring, Loads, Modelling and Control. Ocean Engineering, 313. ISSN 0029-8018

Jemaa, Y, Yeboah, D and Gkantou, M (2024) Flexural performance of glulam timber beams with glued-in BFRP rods connections. Construction and Building Materials, 443. ISSN 0950-0618

Gkantou, M, Tziavos, NI, Dirar, S, Theofanous, M, Ukpedor, OP and Foster, A (2024) Assessment of design models for aluminium alloy CHS beam-columns with stocky cross-sections. Structures, 65.

Wei, X, Zhou, H, Kamaris, GS, Gkantou, M, Yun, F, Zuo, X, Guo, X and Ali, SB (2024) Cyclic behaviour of welded stainless steel beam-to-column connections: Experimental and numerical study. Journal of Constructional Steel Research, 218. ISSN 0143-974X

Ran, H, Ma, J, Chen, X, Sun, Y, Gkantou, M and McCrum, D (2024) Local Stability of Laser-Welded Stainless-Steel T-Section Stub Columns. Journal of Structural Engineering, 150 (7). ISSN 0733-9445

Bock, M, Gkantou, M, Theofanous, M, Afshan, S and Yuan, H (2023) Ultimate behaviour of hybrid stainless steel cross-sections. Journal of Constructional Steel Research, 210. ISSN 0143-974X

Gkantou, M, Georgantzia, E, Kadhim, A, Kamaris, GS and Sadique, M (2023) Geopolymer concrete-filled aluminium alloy tubular cross-sections. Structures, 51. pp. 528-543. ISSN 2352-0124

Bin Ali, S, Kamaris, GS and Gkantou, M (2022) Flexural buckling behaviour of concrete-filled double skin aluminium alloy columns. Engineering Structures, 275 (Part B). ISSN 0141-0296

Georgantzia, E, Gkantou, M and Kamaris, GS (2022) Aluminium alloy channel columns: Testing, numerical modelling and design. Thin-Walled Structures, 182 (A). ISSN 0263-8231

Bin Ali, S, Kamaris, GS and Gkantou, M (2022) Flexural behaviour of concrete-filled double skin aluminium alloy tubes. Engineering Structures, 272. ISSN 0141-0296

Georgantzia, E, Ali, SB, Gkantou, M, Kamaris, GS, Kot, P and Hashim, K (2022) Numerical modelling of concrete-filled aluminium alloy 6082-T6 columns under axial compression. Journal of Physics: Conference Series, 2198 (1). 012045-012045. ISSN 1742-6588

Georgantzia, E, Gkantou, M, Kamaris, GS and Kansara, KD (2022) Ultimate response and plastic design of aluminium alloy continuous beams. Structures, 39. pp. 175-193. ISSN 2352-0124

Georgantzia, E, Gkantou, M, Kamaris, GS and Kansara, KD (2022) Design of aluminium alloy channel sections under minor axis bending. Thin-Walled Structures, 174. ISSN 0263-8231

Ali, SB, Kamaris, GS, Gkantou, M and Kansara, KD (2022) Concrete-filled and bare 6082-T6 aluminium alloy tubes under in-plane bending: Experiments, finite element analysis and design recommendations. Thin-Walled Structures, 172. ISSN 0263-8231

Aldeka, AB, Tziavos, NI, Gkantou, M, Dirar, S and Chan, AHC (2021) Seismic design of non-structural components mounted on irregular reinforced concrete buildings. Journal of Building Engineering, 46. ISSN 2352-7102

Georgantzia, E, Gkantou, M and Kamaris, GS (2021) Aluminium alloys as structural material: A review of research. Engineering Structures, 227. ISSN 0141-0296

Georgantzia, E, Gkantou, M and Kamaris, GS (2021) Numerical Modelling and Design of Aluminium Alloy Angles under Uniform Compression. CivilEng, 2 (3). pp. 632-651. ISSN 2673-4109

Georgantzia, E, Bin Ali, S, Gkantou, M, Kamaris, GS, Kansara, KD and Atherton, W (2021) Flexural buckling performance of concrete-filled aluminium alloy tubular columns. Engineering Structures, 242 (1). ISSN 0141-0296

Yeboah, D and Gkantou, M (2021) Investigation of flexural behaviour of structural timber beams strengthened with NSM basalt and glass FRP bars. Structures, 33. pp. 390-409. ISSN 2352-0124

Kadhum, M, Mahdi, Z, Funfakh, Y, Mohammed, Z, Abdulraheem, M and Gkantou, M (2021) Experimental investigation on the post-fire performance of reactive powder concrete columns. Przegląd Naukowy Inżynieria i Kształtowanie Środowiska, 30 (2). pp. 315-326. ISSN 1732-9353

Kot, P, Muradov, M, Gkantou, M, Kamaris, GS, Hashim, KS and Yeboah, D (2021) Recent Advancements in Non-Destructive Testing Techniques for Structural Health Monitoring. Applied Sciences, 11 (6). ISSN 2076-3417

Omer, G, Kot, P, Atherton, W, Muradov, M, Gkantou, M, Shaw, A, Riley, ML, Hashim, KS and Al-Shamma'a, A (2021) A Non-Destructive Electromagnetic Sensing Technique to Determine Chloride Level in Maritime Concrete. Karbala International Journal of Modern Science, 7 (1). pp. 61-71. ISSN 2405-609X

Cotterill, J, Ethaib, S, Hashim, KS, Alqashou, F, Al-Hayawi, AY, Abdellatif, M, Gkantou, M and Shubbar, AAF (2021) Evaluation of the Use of Lignocellusic Biomass in Thermal Insulation for Green Building. IOP Conference Series: Materials Science and Engineering, 1058 (1). ISSN 1757-8981

Almatrafi, M, Theofanous, M, Dirar, S and Gkantou, M (2021) Structural response of cold-formed lipped Z purlins – Part 1: Experimental investigation. Thin-Walled Structures, 161. ISSN 0263-8231

Gkantou, M, Bock, M and Theofanous, M (2021) Design of stainless steel cross-sections with outstand elements under stress gradients. Journal of Constructional Steel Research, 179. ISSN 0143-974X

Tziavos, NI, Gkantou, M, Theofanous, M, Dirar, S and Baniotopoulos, C (2020) Behaviour of grout-filled double-skin tubular steel stub-columns: Numerical modelling and design considerations. Structures, 27. pp. 1623-1636. ISSN 2352-0124

Gkantou, M, Rebelo, C and Baniotopoulos, C (2020) Life Cycle Assessment of Tall Onshore Hybrid Steel Wind Turbine Towers. Energies, 13 (15). ISSN 1996-1073

Hashim, KS, Ali, S, AlRifaie, J, Kot, P, Shaw, A, Al Khaddar, RM, Idowu, IO and Gkantou, M (2020) Escherichia coli inactivation using a hybrid ultrasonic–electrocoagulation reactor. Chemosphere, 247. ISSN 1879-1298

Gkantou, M, Muradov, M, Kamaris, GS, Hashim, KS, Atherton, W and Kot, P (2019) Novel Electromagnetic Sensors Embedded in Reinforced Concrete Beams for Crack Detection. Sensors, 19 (23). ISSN 1424-8220

Gkantou, M, Theofanous, M and Baniotopoulos, C (2019) A NUMERICAL STUDY OF PRESTRESSED HIGH STRENGTH STEEL TUBULAR MEMBERS. Frontiers of Structural and Civil Engineering. ISSN 2095-2430

Teng, KH, Kot, P, Muradov, M, Shaw, A, Hashim, KS, Gkantou, M and Al-Shamma'a, A (2019) Embedded Smart Antenna for Nondestructive Testing and Evaluation (NDT&E) of Moisture Content and Deterioration in Concrete. Sensors, 19 (3). ISSN 1424-8220

Afshan, S, Theofanous, M, Wang, J, Gkantou, M and Gardner, L (2019) Testing, numerical simulation and design of prestressed high strength steel arched trusses. Engineering Structures, 183. pp. 510-522. ISSN 0141-0296

Gkantou, M, Theofanous, M and Baniotopoulos, P (2018) Plastic design of hot-finished high strength steel continuous beams. Thin-Walled Structures, 133. pp. 85-95. ISSN 0263-8231

Martinez-Vazquez, P, Gkantou, M and Baniotopoulos, C (2018) Strength and ductility demands on wind turbine towers due to earthquake and wind load. Proceedings of the Institution of Civil Engineers - Structures and Buildings. pp. 1-8. ISSN 0965-0911

Gkantou, M, Kokosis, G, Theofanous, M and Dirar, S (2018) Plastic design of stainless steel continuous beams. Journal of Constructional Steel Research. ISSN 0143-974X

Gkantou, M, Theofanous, M, Wang, J, Baniotopoulos, C and Gardner, L (2017) Behaviour and design of high-strength steel cross-sections under combined loading. Proceedings of the Institution of Civil Engineers - Structures and Buildings, 170 (11). pp. 841-854. ISSN 0965-0911

Gkantou, M, Theofanous, M, Antoniou, N and Baniotopoulos, C (2017) Compressive behaviour of high-strength steel cross-sections. Proceedings of the Institution of Civil Engineers - Structures and Buildings, 170 (11). pp. 813-824. ISSN 0965-0911

Wang, J, Afshan, S, Gkantou, M, Theofanous, M, Baniotopoulos, C and Gardner, L (2016) Flexural behaviour of hot-finished high strength steel square and rectangular hollow sections. Journal of Constructional Steel Research, 121. pp. 97-109. ISSN 0143-974X

Conference or Workshop Item

Chandrasekar, R, Gkantou, M, Nikitas, G, Hashim, KS, Pradeep, HR and Ahuja, A (2022) Integration of 3D Concrete Printing in the Construction Industry: A Short Review. In: Current Trends in Geotechnical Engineering and Construction . pp. 445-452. (International Conference on Geotechnical Engineering, Baghdad, Iraq).

Georgantzia, E and Gkantou, M (2021) Flexural Buckling of Concrete-Filled Aluminium Alloy CHS Columns: Numerical Modelling and Design. In: Lecture Notes in Civil Engineering , 143. pp. 697-707. (3rd International Conference on Trends and Recent Advances in Civil Engineering, Noida, India).

Abdulredha, M, Muhsin, AA, Al-Janabi, A, Alajm, BN, Gkantou, M, Amoako-Attah, J, Al-Jumeily, D, Mustafina, J and AlKhayyat, A (2021) Using SF and CKD as cement replacement materials for producing cement mortar. In: IOP Conference Series: Materials Science and Engineering , 1058 (1). 012007-012007. (1st Conference on Science and Technology for Early Career Researchers and Postgraduate Students (STEPS 2020), 20-22 December 2020, Erbil, Iraq).

Ali, SB, Georgantzia, E, Kamaris, GS, Gkantou, M and Kot, P (2020) Experimental study of square and rectangular hollow section aluminium alloy columns. In: Journal of Physics: Conference Series , 2198 (1). 012046-012046. (15th Global Congress on Manufacturing and Management (GCMM), 25 November 2020 - 27 November 2020, Liverpool).

Alenezi, A, Hasan, H, Hashim, KS, Amoako-Attah, J, Gkantou, M, Muradov, M, Kot, P and Abdulhadi, B (2020) Zeolite-assisted electrocoagulation for remediation of phosphate from calcium-phosphate solution. In: IOP Conference Series: Materials Science and Engineering (888). (2nd International Conference on Civil and Environmental Engineering Technologies (ICCEET 2020), 10 June 2020 - 11 June 2020, Najaf, Iraq).

Gkantou, M, Martinez-Vazquez, P and Baniotopoulos, C (2017) On the structural response of a tall hybrid onshore wind turbine tower. In: Procedia Engineering , 199. pp. 3200-3205. (10th International Conference on Structural Dynamics (EURODYN), 10 September 2017 - 13 September 2017, Sapienza Univ Rome, Fac Civil & Ind Engn, Rome, ITALY).

Martinez-Vazquez, P, Gkantou, M and Baniotopoulos, C (2017) Strength demands of tall wind turbines subject to earthquakes and wind load. In: Procedia Engineering , 199. pp. 3212-3217. (10th International Conference on Structural Dynamics (EURODYN), 10 September 2017 - 13 September 2017, Sapienza Univ Rome, Fac Civil & Ind Engn, Rome, ITALY).